directly query the function information which this set was representing.
This simplifies the interface of the inline cost analysis, and makes the
always-inline pass significantly more efficient.
Previously, always-inline would first make a single set of every
function in the module *except* those marked with the always-inline
attribute. It would then query this set at every call site to see if the
function was a member of the set, and if so, refuse to inline it. This
is quite wasteful. Instead, simply check the function attribute directly
when looking at the callsite.
The normal inliner also had similar redundancy. It added every function
in the module with the noinline attribute to its set to ignore, even
though inside the cost analysis function we *already tested* the
noinline attribute and produced the same result.
The only tricky part of removing this is that we have to be able to
correctly remove only the functions inlined by the always-inline pass
when finalizing, which requires a bit of a hack. Still, much less of
a hack than the set of all non-always-inline functions was. While I was
touching this function, I switched a heavy-weight set to a vector with
sort+unique. The algorithm already had a two-phase insert and removal
pattern, we were just needlessly paying the uniquing cost on every
insert.
This probably speeds up some compiles by a small amount (-O0 compiles
with lots of always-inline, so potentially heavy libc++ users), but I've
not tried to measure it.
I believe there is no functional change here, but yell if you spot one.
None are intended.
Finally, the direction this is going in is to greatly simplify the
inline cost query interface so that we can replace its implementation
with a much more clever one. Along the way, all the APIs get simplified,
so it seems incrementally good.
llvm-svn: 152903
are optimization hints, but at -O0 we're not optimizing. This becomes a problem
when the alwaysinline attribute is abused.
rdar://10921594
llvm-svn: 151429
PHI nodes which were matched, rather than climbing up the
original PHI node's operands to rediscover PHI nodes for
recording, since the PHI nodes found that are not
necessarily part of the matched set.
This fixes rdar://10589171.
llvm-svn: 149654
This is the initial checkin of the basic-block autovectorization pass along with some supporting vectorization infrastructure.
Special thanks to everyone who helped review this code over the last several months (especially Tobias Grosser).
llvm-svn: 149468
Patch by Brendon Cahoon!
This extends the existing LoopUnroll and LoopUnrollPass. Brendon
measured no regressions in the llvm test suite with -unroll-runtime
enabled. This implementation works by using the existing loop
unrolling code to unroll the loop by a power-of-two (default 8). It
generates an if-then-else sequence of code prior to the loop to
execute the extra iterations before entering the unrolled loop.
llvm-svn: 146245
This handles the case in which LSR rewrites an IV user that is a phi and
splits critical edges originating from a switch.
Fixes <rdar://problem/6453893> LSR is not splitting edges "nicely"
llvm-svn: 141059
SplitLandingPadPredecessors is similar to SplitBlockPredecessors in that it
splits the current block and attaches a set of predecessors to the new basic
block. However, it differs from SplitBlockPredecessors in that it's specifically
designed to handle landing pad blocks.
Two new basic blocks are created: one that is has the vector of predecessors as
its predecessors and one that has the remaining predecessors as its
predecessors. Those two new blocks then receive a cloned copy of the landingpad
instruction from the original block. The landingpad instructions are joined in a
PHI, etc. Like SplitBlockPredecessors, it updates the LLVM IR, AliasAnalysis,
DominatorTree, DominanceFrontier, LoopInfo, and LCCSA analyses.
llvm-svn: 138014
based on ScalarEvolution without changing the induction variable phis.
This utility is the main tool of IndVarSimplifyPass, but the pass also
restructures induction variables in strange ways that are sensitive to
pass ordering. This provides a way for other loop passes to simplify
new uses of induction variables created during transformation. The
utility may be used by any pass that preserves ScalarEvolution. Soon
LoopUnroll will use it.
The net effect in this checkin is to cleanup the IndVarSimplify pass
by factoring out the SimplifyIndVar algorithm into a standalone utility.
llvm-svn: 137197
patch brings numerous advantages to LLVM. One way to look at it
is through diffstat:
109 files changed, 3005 insertions(+), 5906 deletions(-)
Removing almost 3K lines of code is a good thing. Other advantages
include:
1. Value::getType() is a simple load that can be CSE'd, not a mutating
union-find operation.
2. Types a uniqued and never move once created, defining away PATypeHolder.
3. Structs can be "named" now, and their name is part of the identity that
uniques them. This means that the compiler doesn't merge them structurally
which makes the IR much less confusing.
4. Now that there is no way to get a cycle in a type graph without a named
struct type, "upreferences" go away.
5. Type refinement is completely gone, which should make LTO much MUCH faster
in some common cases with C++ code.
6. Types are now generally immutable, so we can use "Type *" instead
"const Type *" everywhere.
Downsides of this patch are that it removes some functions from the C API,
so people using those will have to upgrade to (not yet added) new API.
"LLVM 3.0" is the right time to do this.
There are still some cleanups pending after this, this patch is large enough
as-is.
llvm-svn: 134829
I also changed -simplifycfg, -jump-threading and -codegenprepare to use this to produce slightly better code without any extra cleanup passes (AFAICT this was the only place in -simplifycfg where now-dead conditions of replaced terminators weren't being cleaned up). The only other user of this function is -sccp, but I didn't read that thoroughly enough to figure out whether it might be holding pointers to instructions that could be deleted by this.
llvm-svn: 131855
will allow multiple context with different loop unroll parameters to run. This is a minor change and no effect
on existing application.
llvm-svn: 129449
Use debug info in the IR to find the directory/file:line:col. Each time that location changes, bump a counter.
Unlike the existing profiling system, we don't try to look at argv[], and thusly don't require main() to be present in the IR. This matches GCC's technique where you specify the profiling flag when producing each .o file.
The runtime library is minimal, currently just calling printf at program shutdown time. The API is designed to make it possible to emit GCOV data later on.
llvm-svn: 129340
after the given instruction; make sure to handle that case correctly.
(It's difficult to trigger; the included testcase involves a dead
block, but I don't think that's a requirement.)
While I'm here, get rid of the unnecessary warning about
SimplifyInstructionsInBlock, since it should work correctly as far as I know.
llvm-svn: 128782
itself without going via a phi node then we could return false here in
spite of making a change. Also, tweak the comment because this method
can (and always could) return true without deleting the original phi node.
For example, if the phi node was used by a read-only invoke instruction
which is used by another phi node phi2 which is only used by and only uses
the invoke, then phi2 would be deleted but not the invoke instruction and
not the original phi node.
llvm-svn: 126129
Modified patch by Adam Preuss.
This builds on the existing framework for block tracing, edge profiling and optimal edge profiling.
See -help-hidden for new flags.
For documentation, see the technical report "Implementation of Path Profiling..." in llvm.org/pubs.
llvm-svn: 124515
checks enabled:
1) Use '<' to compare integers in a comparison function rather than '<='.
2) Use the uniqued set DefBlocks rather than Info.DefiningBlocks to initialize
the priority queue.
The speedup of scalarrepl on test-suite + SPEC2000 + SPEC2006 is a bit less, at
just under 16% rather than 17%.
llvm-svn: 123662
eliminating a potentially quadratic data structure, this also gives a 17%
speedup when running -scalarrepl on test-suite + SPEC2000 + SPEC2006. My initial
experiment gave a greater speedup around 25%, but I moved the dominator tree
level computation from dominator tree construction to PromoteMemToReg.
Since this approach to computing IDFs has a much lower overhead than the old
code using precomputed DFs, it is worth looking at using this new code for the
second scalarrepl pass as well.
llvm-svn: 123609
phi nodes. It is called from MergeBlockIntoPredecessor which is
called from GVN, which claims to preserve these.
I'm skeptical that this is the actual problem behind PR8954, but
this is a stab in the right direction.
llvm-svn: 123222
1. Take a flags argument instead of a bool. This makes
it more clear to the reader what it is used for.
2. Add a flag that says that "remapping a value not in the
map is ok".
3. Reimplement MapValue to share a bunch of code and be a lot
more efficient. For lookup failures, don't drop null values
into the map.
4. Using the new flag a bunch of code can vaporize in LinkModules
and LoopUnswitch, kill it.
No functionality change.
llvm-svn: 123058
of instcombine that is currently in the middle of the loop pass pipeline. This
commit only checks in the pass; it will hopefully be enabled by default later.
llvm-svn: 122719
it could only be tested indirectly, via instcombine, gvn or some other
pass that makes use of InstructionSimplify, which means that testcases
had to be carefully contrived to dance around any other transformations
that that pass did.
llvm-svn: 122264
by my recent GVN improvement. Looking through a single layer of
PHI nodes when attempting to sink GEPs, we need to iteratively
look through arbitrary PHI nests.
llvm-svn: 120202
must be called in the pass's constructor. This function uses static dependency declarations to recursively initialize
the pass's dependencies.
Clients that only create passes through the createFooPass() APIs will require no changes. Clients that want to use the
CommandLine options for passes will need to manually call the appropriate initialization functions in PassInitialization.h
before parsing commandline arguments.
I have tested this with all standard configurations of clang and llvm-gcc on Darwin. It is possible that there are problems
with the static dependencies that will only be visible with non-standard options. If you encounter any crash in pass
registration/creation, please send the testcase to me directly.
llvm-svn: 116820
more careful not to call SimplifyInstructionsInBlock() on an unreachable block, the issue has been fixed at a higher level. Add
a big warning to SimplifyInstructionsInBlock() to hopefully prevent this in the future.
llvm-svn: 114117
I'm sure it is harmless. Original commit message:
If PrototypeValue is erased in the middle of using the SSAUpdator
then the SSAUpdator may access freed memory. Instead, simply pass
in the type and name explicitly, which is all that was used anyway.
llvm-svn: 112810
fix: add a flag to MapValue and friends which indicates whether
any module-level mappings are being made. In the common case of
inlining, no module-level mappings are needed, so MapValue doesn't
need to examine non-function-local metadata, which can be very
expensive in the case of a large module with really deep metadata
(e.g. a large C++ program compiled with -g).
This flag is a little awkward; perhaps eventually it can be moved
into the ClonedCodeInfo class.
llvm-svn: 112190
which does the same thing. This eliminates redundant code and
handles MDNodes better. MDNode linking still doesn't fully
work yet though.
llvm-svn: 111941
- Eliminate redundant successors.
- Convert an indirectbr with one successor into a direct branch.
Also, generalize SimplifyCFG to be able to be run on a function entry block.
It knows quite a few simplifications which are applicable to the entry
block, and it only needs a few checks to avoid trouble with the entry block.
llvm-svn: 111060
exactly what bugpoint expected it to do.
There was also only one user of
BlockExtractorPass(const std::vector<BasicBlock*> &B), so just remove it and
make BlockExtractorPass read BlockFile.
This fixes bugpoint's block extraction.
Nick, please review.
llvm-svn: 109936
such a way that debug info for symbols preserved even if symbols are
optimized away by the optimizer.
Add new special pass to remove debug info for such symbols.
llvm-svn: 107416
handled cases where a block had zero predecessors, but failed to detect other
cases like loops with no entries. The SSAUpdater is already doing a forward
traversal through the blocks, so it is not hard to identify the blocks that
were never reached on that traversal. This fixes the crash for ppc on the
stepanov_vector test.
llvm-svn: 103184
add a version of createLowerInvokePass that allows the client
to specify whether it wants "expensive" or "cheap" lowering.
Patch by Alex Mac!
llvm-svn: 102402
This fixes a bug where calls inlined into an invoke would get
changed into an invoke but the array would keep pointing to
the (now dead) call. The improved inliner behavior is still
disabled for now.
llvm-svn: 102196
that appear in the SCC as a result of inlining as candidates
for inlining. Change this so that it *does* consider call
sites that change from being indirect to being direct as a
result of inlining. This allows it to completely
"devirtualize" the testcase.
llvm-svn: 102146
arguments are handled with a new InlineFunctionInfo class. This
makes it easier to extend InlineFunction to return more info in the
future.
llvm-svn: 102137
to determine where to place PHIs by iteratively comparing reaching definitions
at each block. That was just plain wrong. This version now computes the
dominator tree within the subset of the CFG where PHIs may need to be placed,
and then places the PHIs in the iterated dominance frontier of each definition.
The rest of the patch is mostly the same, with a few more performance
improvements added in.
llvm-svn: 101612
to CallGraphSCCPass's instead of passing around a
std::vector<CallGraphNode*>. No functionality change,
but now we have a much tidier interface.
llvm-svn: 101558
Added support for address spaces and added a isVolatile field to memcpy, memmove, and memset,
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
llvm-svn: 100304
(what was I thinking?) and there's also a problem with LCSSA. I'll try again
later with fixes.
--- Reverse-merging r100263 into '.':
U lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100177 into '.':
G lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100148 into '.':
G lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100147 into '.':
U include/llvm/Transforms/Utils/SSAUpdater.h
G lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100131 into '.':
G include/llvm/Transforms/Utils/SSAUpdater.h
G lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100130 into '.':
G lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100126 into '.':
G include/llvm/Transforms/Utils/SSAUpdater.h
G lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100050 into '.':
D test/Transforms/GVN/2010-03-31-RedundantPHIs.ll
--- Reverse-merging r100047 into '.':
G include/llvm/Transforms/Utils/SSAUpdater.h
G lib/Transforms/Utils/SSAUpdater.cpp
llvm-svn: 100264
Added support for address spaces and added a isVolatile field to memcpy, memmove, and memset,
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
llvm-svn: 100191
PHIs. The previous algorithm was unable to reliably detect when existing
PHIs in a cycle can be reused. I'm still working on reducing a testcase.
Radar 7711900.
llvm-svn: 100047
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
A update of langref will occur in a subsequent checkin.
llvm-svn: 99928
The Caller cost info would be reset everytime a callee was inlined. If the
caller has lots of calls and there is some mutual recursion going on, the
caller cost info could be calculated many times.
This patch reduces inliner runtime from 240s to 0.5s for a function with 20000
small function calls.
This is a more conservative version of r98089 that doesn't break the clang
test CodeGenCXX/temp-order.cpp. That test relies on rather extreme inlining
for constant folding.
llvm-svn: 98099
The Caller cost info would be reset everytime a callee was inlined. If the
caller has lots of calls and there is some mutual recursion going on, the
caller cost info could be calculated many times.
This patch reduces inliner runtime from 240s to 0.5s for a function with 20000
small function calls.
llvm-svn: 98089
can be used in more places. Add an argument for the TargetData that
most of them need. Update for the getInt8PtrTy() change. Should be
no functionality change.
llvm-svn: 97844
Initial skeleton and SCEVUnknown lowering implemented,
the rest should come relatively quickly. Move testcase
to new directory.
Move pass to right before SimplifyLibCalls - which is
moved down a bit so we can take advantage of a few opts.
llvm-svn: 95628
This time it's for real! I am going to hook this up in the frontends as well.
The inliner has some experimental heuristics for dealing with the inline hint.
When given a -respect-inlinehint option, functions marked with the inline
keyword are given a threshold just above the default for -O3.
We need some experiments to determine if that is the right thing to do.
llvm-svn: 95466
MergeBlockIntoPredecessor. This makes SimplifyCFG slightly more aggressive,
and makes it unnecessary for LoopUnroll to have its own copy of this code.
llvm-svn: 85667
Checks on Demand algorithm which looks at arbitrary branches instead of loop
iterations. This is GSoC work by Andre Tavares with only editorial changes
applied!
llvm-svn: 85382
GEPs (more than one non-zero index) into simple GEPs (at most one
non-zero index). In some simple experiments using this it's not
uncommon to see 3% overall code size wins, because it exposes
redundancies that can be eliminated, however it's tricky to use
because instcombine aggressively undoes the work that this pass does.
llvm-svn: 85144
Update all analysis passes and transforms to treat free calls just like FreeInst.
Remove RaiseAllocations and all its tests since FreeInst no longer needs to be raised.
llvm-svn: 84987
constants out of loops. These aren't covered by the regular LICM
pass, because in LLVM IR constants don't require separate
instructions. They're not always covered by the MachineLICM pass
either, because it doesn't know how to unfold folded constant-pool
loads. This is somewhat experimental at this point, and off by
default.
llvm-svn: 82076
that get created during loop unswitching, and fix SplitBlockPredecessors'
LCSSA updating code to create new PHIs instead of trying to just move
existing ones.
Also, optimize Loop::verifyLoop, since it gets called a lot. Use
searches on a sorted list of blocks instead of calling the "contains"
function, as is done in other places in the Loop class, since "contains"
does a linear search. Also, don't call verifyLoop from LoopSimplify or
LCSSA, as the PassManager is already calling verifyLoop as part of
LoopInfo's verifyAnalysis.
llvm-svn: 81221
argpromotion and structretpromote. Basically, when replacing
a function, they used the 'changeFunction' api which changes
the entry in the function map (and steals/reuses the callgraph
node).
This has some interesting effects: first, the problem is that it doesn't
update the "callee" edges in any callees of the function in the call graph.
Second, this covers for a major problem in all the CGSCC pass stuff, which
is that it is completely broken when functions are deleted if they *don't*
reuse a CGN. (there is a cute little fixme about this though :).
This patch changes the protocol that CGSCC passes must obey: now the CGSCC
pass manager copies the SCC and preincrements its iterator to avoid passes
invalidating it. This allows CGSCC passes to mutate the current SCC. However
multiple passes may be run on that SCC, so if passes do this, they are now
required to *update* the SCC to be current when they return.
Other less interesting parts of this patch are that it makes passes update
the CG more directly, eliminates changeFunction, and requires clients of
replaceCallSite to specify the new callee CGN if they are changing it.
llvm-svn: 80527
calls into a function and if the calls bring in arrays, try to merge
them together to reduce stack size. For example, in the testcase
we'd previously end up with 4 allocas, now we end up with 2 allocas.
As described in the comments, this is not really the ideal solution
to this problem, but it is surprisingly effective. For example, on
176.gcc, we end up eliminating 67 arrays at "gccas" time and another
24 at "llvm-ld" time.
One piece of concern that I didn't look into: at -O0 -g with
forced inlining this will almost certainly result in worse debug
info. I think this is acceptable though given that this is a case
of "debugging optimized code", and we don't want debug info to
prevent the optimizer from doing things anyway.
llvm-svn: 80215
using the Curiously Recurring Template Pattern with LoopBase.
This will help further refactoring, and future functionality for
Loop. Also, Headers can now foward-declare Loop, instead of pulling
in LoopInfo.h or doing tricks.
llvm-svn: 75519
when one of them can be converted to a trivial icmp and conditional
branch.
This addresses what is essentially a phase ordering problem.
SimplifyCFG knows how to do this transformation, but it doesn't do so
if the primary block has any instructions in it other than an icmp and
a branch. In the given testcase, the block contains other instructions,
however they are loop-invariant and can be hoisted. SimplifyCFG doesn't
have LoopInfo though, so it can't hoist them. And, it's important that
the blocks be merged before LoopRotation, as it doesn't support
multiple-exit loops.
llvm-svn: 74396
is that, for functions whose bodies are entirely guarded by an if-statement, it
can be profitable to pull the test out of the callee and into the caller.
This code has had some cursory testing, but still has a number of known issues
on the LLVM test suite.
llvm-svn: 73338
CallbackVH, with fixes. allUsesReplacedWith need to
walk the def-use chains and invalidate all users of a
value that is replaced. SCEVs of users need to be
recalcualted even if the new value is equivalent. Also,
make forgetLoopPHIs walk def-use chains, since any
SCEV that depends on a PHI should be recalculated when
more information about that PHI becomes available.
llvm-svn: 70927
makes ScalarEvolution::deleteValueFromRecords, and it's code that
subtly needed to be called before ReplaceAllUsesWith, unnecessary.
It also makes ValueDeletionListener unnecessary.
llvm-svn: 70645
of returning a list of pointers to Values that are deleted. This was
unsafe, because the pointers in the list are, by nature of what
RecursivelyDeleteDeadInstructions does, always dangling. Replace this
with a simple callback mechanism. This may eventually be removed if
all clients can reasonably be expected to use CallbackVH.
Use this to factor out the dead-phi-cycle-elimination code from LSR
utility function, and generalize it to use the
RecursivelyDeleteTriviallyDeadInstructions utility function.
This makes LSR more aggressive about eliminating dead PHI cycles;
adjust tests to either be less trivial or to simply expect fewer
instructions.
llvm-svn: 70636
the inliner; prevents nondeterministic behavior
when the same address is reallocated.
Don't build call graph nodes for debug intrinsic calls;
they're useless, and there were typically a lot of them.
llvm-svn: 67311
