Trivial multiplication by zero may survive the worklist. We tried to
reassociate the multiplication with a division instruction, causing us
to divide by zero; bail out instead.
This fixes PR24726.
llvm-svn: 246939
In searching for a fix for the underlying code-quality bug highlighted by
r246937 (that SDAG simplification can lead to us generating an ISD::OR node
with a constant zero LHS), I ran across this:
We generically canonicalize commutative binary-operation nodes in SDAG getNode
so that, if only one operand is a constant, it will be on the RHS. However, we
were doing this only after a bunch of constant-based simplification checks that
all assume this canonical form (that any constant will be on the RHS). Moving
the operand-swapping canonicalization prior to these checks seems like the
right thing to do (and, as it turns out, causes SDAG to completely fold away the
computation in test/CodeGen/ARM/2012-11-14-subs_carry.ll, just like InstCombine
would do).
llvm-svn: 246938
To commute a trivial rlwimi instructions (meaning one with a full mask and zero
shift), we'd need to ability to form an all-zero mask (instead of an all-one
mask) using rlwimi. We can't represent this, however, and we'll miscompile code
if we try.
The code quality problem that this highlights (that SDAG simplification can
lead to us generating an ISD::OR node with a constant zero LHS) will be fixed
as a follow-up.
Fixes PR24719.
llvm-svn: 246937
Summary:
Update the Go bindings to DIBuilder to match
the split of creating local variables into
auto and parameter variables.
Reviewers: pcc
Subscribers: llvm-commits, axw
Differential Revision: http://reviews.llvm.org/D11864
llvm-svn: 246935
Summary:
This diff attempts to address the concerns raised in
http://reviews.llvm.org/D12488.
We introduce a new USE_SHARED option to llvm_config,
which, if set, causes the target to be linked against
libLLVM.
add_llvm_utility now uniformly disables linking against
libLLVM. These utilities are not intended for distribution,
and this keeps the option handling more centralised.
llvm-shlib is now processes before any other "tools"
subdirectories, ensuring the libLLVM target is defined
before its dependents.
One main difference from what was requested: llvm_config
does not prune LLVM_DYLIB_COMPONENTS from the components
passed into explicit_llvm_config. This is because the "all"
component does something special, adding additional
libraries (namely libLTO). Adding the component libraries
after libLLVM should not be a problem, as symbols will be
resolved in libLLVM first.
Finally, I'm not really happy with the
DISABLE_LLVM_LINK_LLVM option, but I'm not sure of a
better way to get the following:
- link all tools and shared libraries to libLLVM if
LLVM_LINK_LLVM_DYLIB is set
- some way of explicitly *not* doing so for utilities
and libLLVM itself
Suggestions for improvement here are particularly welcome.
Reviewers: beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12590
llvm-svn: 246918
This commit accomplish two goals:
1) it's a step forward to deprecate macho-dump, now less than 40 tests
rely on it.
2) It tests all the MachO specific features introduced in llvm-readobj in
the following commits: r246789, r246665, r246474.
While the conversion is mostly mechanical (I double-checked all the
tests output one by one, but still), a post-commit review is greatly
appreciated.
llvm-svn: 246904
PPCISelDAGToDAG has a transformation that generates a rlwimi instruction from
an input pattern that looks like this:
and(or(x, c1), c2)
but the associated logic does not work if there are bits that are 1 in c1 but 0
in c2 (these are normally canonicalized away, but that can't happen if the 'or'
has other users. Make sure we abort the transformation if such bits are
discovered.
Fixes PR24704.
llvm-svn: 246900
The variable is actually called ANDROID_SERIAL.
This was not exercised on the bots until today.
Should fix the sanitizer-x86_64-linux failures.
llvm-svn: 246898
Casting to unsigned long can cause the time to get truncated to 32-bits,
making it appear to be a valid timestamp. Just use isUInt<32> instead.
llvm-svn: 246840
This adds a basic cost model for interleaved-access vectorization (and a better
default for shuffles), and enables interleaved-access vectorization by default.
The relevant difference from the default cost model for interleaved-access
vectorization, is that on PPC, the shuffles that end up being used are *much*
cheaper than modeling the process with insert/extract pairs (which are
quite expensive, especially on older cores).
llvm-svn: 246824
On the A2, with an eye toward QPX unaligned-load merging, we should always use
aggressive interleaving. It is generally superior to only using concatenation
unrolling.
llvm-svn: 246819
When forming permutation-based unaligned vector loads, we need to know whether
it is valid to read ahead of the requested address by a full vector length.
Doing so is more efficient (and allows for more CSE with later loads), but
could trigger a page fault if invalid. To determine validity, we look for other
loads in the same block that access the relevant address range.
The relevant point here is that we need to do this as part of the process of
forming permutation-based vector loads, and this happens quite early in the
SDAG pipeline - specifically before many of the address calculations are fully
canonicalized. As a result, we need to try harder to recognize base+offset
address computations, because they still might appear as chain of adds
(base+offset+offset, for example). To account for this, we'll look through
chains of adds, accumulating the constant offsets.
llvm-svn: 246813
As a first step towards a new implementation of the base pointer inference algorithm, introduce an abstraction for BDVs, strengthen the assertions around them, and rewrite the BDV relation code in terms of the abstraction which includes an explicit notion of whether the BDV is also a base. The later is motivated by the fact we had a bug where insertelement was always assumed to be a base pointer even though the BDV code knew it wasn't. The strengthened assertions in this patch would have caught that bug.
The next step will be to separate the DefiningValueMap into a BDV use list cache (entirely within findBasePointers) and a base pointer cache. Having the former will allow me to use a deterministic visit order when visiting BDVs in the inference algorithm and remove a bunch of ordering related hacks. Before actually doing the last step, I'm likely going to extend the lattice with a 'BaseN' (seen only base inputs) state so that I can kill the post process optimization step.
Phabricator Revision: http://reviews.llvm.org/D12608
llvm-svn: 246809
Pre-P8, when we generate code for unaligned vector loads (for Altivec and QPX
types), even when accounting for the combining that takes place for multiple
consecutive such loads, there is at least one load instructions and one
permutation for each load. Make sure the cost reported reflects the cost of the
permutes as well.
llvm-svn: 246807
If you compute the MMO offset using unsigned arithmetic, you end up with a
large positive offset instead of a small negative one. In theory, this could
cause bad instruction-scheduling decisions later.
I noticed this by inspection from the debug output, and using that for the
regression test is the best I can do right now.
llvm-svn: 246805
The visit order being used in the base pointer inference algorithm is currently non-deterministic. When working on http://reviews.llvm.org/D12583, I discovered that we were relying on a peephole optimization to get deterministic ordering in one of the test cases.
This change is intented to let me test and land http://reviews.llvm.org/D12583. The current code will not be long lived. I'm starting to investigate a rewrite of the algorithm which will combine the post-process step into the initial algorithm and make the visit order determistic. Before doing that, I wanted to make sure the existing code was complete and the test were stable. Hopefully, patches should be up for review for the new algorithm this week or early next.
llvm-svn: 246801
