If we are extracting a subvector that has just been inserted then we should just use the original inserted subvector.
This has come up in certain several x86 shuffle lowering cases where we are crossing 128-bit lanes.
Differential Revision: https://reviews.llvm.org/D24254
llvm-svn: 280715
Currently the pass updates branch weights in the IR if the function has
any PGO info (entry frequency is set). However we could still have
regions of the CFG that does not have branch weights collected (e.g. a
cold region). In this case we'd use static estimates. Since static
estimates for branches are determined independently, they are
inconsistent. Updating them can "randomly" inflate block frequencies.
I've run into this in a completely cold loop of h264ref from
SPEC. -Rpass-with-hotness showed the loop to be completely cold during
inlining (before JT) but completely hot during vectorization (after JT).
The new testcase demonstrate the problem. We check array elements
against 1, 2 and 3 in a loop. The check against 3 is the loop-exiting
check. The block names should be self-explanatory.
In this example, jump threading incorrectly updates the weight of the
loop-exiting branch to 0, drastically inflating the frequency of the
loop (in the range of billions).
There is no run-time profile info for edges inside the loop, so branch
probabilities are estimated. These are the resulting branch and block
frequencies for the loop body:
check_1 (16)
(8) / |
eq_1 | (8)
\ |
check_2 (16)
(8) / |
eq_2 | (8)
\ |
check_3 (16)
(1) / |
(loop exit) | (15)
|
(back edge)
First we thread eq_1 -> check_2 to check_3. Frequencies are updated to
remove the frequency of eq_1 from check_2 and then from the false edge
leaving check_2. Changed frequencies are highlighted with * *:
check_1 (16)
(8) / |
eq_1~ | (8)
/ |
/ check_2 (*8*)
/ (8) / |
\ eq_2 | (*0*)
\ \ |
` --- check_3 (16)
(1) / |
(loop exit) | (15)
|
(back edge)
Next we thread eq_1 -> check_3 and eq_2 -> check_3 to check_1 as new
back edges. Frequencies are updated to remove the frequency of eq_1 and
eq_3 from check_3 and then the false edge leaving check_3 (changed
frequencies are highlighted with * *):
check_1 (16)
(8) / |
eq_1~ | (8)
/ |
/ check_2 (*8*)
/ (8) / |
/-- eq_2~ | (*0*)
(back edge) |
check_3 (*0*)
(*0*) / |
(loop exit) | (*0*)
|
(back edge)
As a result, the loop exit edge ends up with 0 frequency which in turn makes
the loop header to have maximum frequency.
There are a few potential problems here:
1. The profile data seems odd. There is a single profile sample of the
loop being entered. On the other hand, there are no weights inside the
loop.
2. Based on static estimation we shouldn't set edges to "extreme"
values, i.e. extremely likely or unlikely.
3. We shouldn't create profile metadata that is calculated from static
estimation. I am not sure what policy is but it seems to make sense to
treat profile metadata as something that is known to originate from
profiling. Estimated probabilities should only be reflected in BPI/BFI.
Any one of these would probably fix the immediate problem. I went for 3
because I think it's a good policy to have and added a FIXME about 2.
Differential Revision: https://reviews.llvm.org/D24118
llvm-svn: 280713
This was erroneously checked-in for 64 bits while trying to find if there was a way to get 64 bit atomicity in Leon processors. There is not and this change should not have been checked-in. There is no unit test for this as the existing unit tests test for behaviour to 32 bits, which was the original intention of the code.
llvm-svn: 280710
LLVM PR/29052 highlighted that FastISel for MIPS attempted to lower
arguments assuming that it was using the paired 32bit registers to
perform operations for f64. This mode of operation is not supported
for MIPSR6.
This patch resolves the reported issue by adding additional checks
for unsupported floating point unit configuration.
Thanks to mike.k for reporting this issue!
Reviewers: seanbruno, vkalintiris
Differential Review: https://reviews.llvm.org/D23795
llvm-svn: 280706
Unlike PPC64, PPC32/SVRV4 does not have red zone. In the absence of it
there is no guarantee that this part of the stack will not be modified
by any interrupt. To avoid this, make sure to claim the stack frame first
before storing into it.
This fixes https://llvm.org/bugs/show_bug.cgi?id=26519.
Differential Revision: https://reviews.llvm.org/D24093
llvm-svn: 280705
Use ADT/BitmaskEnum for DINode::DIFlags for the following purposes:
Get rid of unsigned int for flags to avoid problems on platforms with sizeof(int) < 4
Flags are now strongly typed
Patch by: Victor Leschuk <vleschuk@gmail.com>
Differential Revision: https://reviews.llvm.org/D23766
llvm-svn: 280700
Summary:
In addition to not including the register operand of the current
instruction also don't include any aliasing registers. We can't consider
these as candidates because using them will clobber the corresponding
register operand of the current instruction.
This change doesn't include a test case and it would probably be difficult
to produce a stable one since the bug depends on the results of register
allocation.
Reviewers: MatzeB, qcolombet, hfinkel
Subscribers: hfinkel, llvm-commits
Differential Revision: https://reviews.llvm.org/D24130
llvm-svn: 280698
We need to bitcast the index operand to a floating point type so that it matches the result type. If not then the passthru part of the DAG will be a bitcast from the index's original type to the destination type. This makes it very difficult to match. The other option would be to add 5 sets of patterns for every other possible type.
llvm-svn: 280696
This is a Windows ARM specific issue. If the code path in the if conversion
ends up using a relocation which will form a IMAGE_REL_ARM_MOV32T, we end up
with a bundle to ensure that the mov.w/mov.t pair is not split up. This is
normally fine, however, if the branch is also predicated, then we end up trying
to predicate the bundle.
For now, report a bundle as being unpredicatable. Although this is false, this
would trigger a failure case previously anyways, so this is no worse. That is,
there should not be any code which would previously have been if converted and
predicated which would not be now.
Under certain circumstances, it may be possible to "predicate the bundle". This
would require scanning all bundle instructions, and ensure that the bundle
contains only predicatable instructions, and converting the bundle into an IT
block sequence. If the bundle is larger than the maximal IT block length (4
instructions), it would require materializing multiple IT blocks from the single
bundle.
llvm-svn: 280689
Use ADT/BitmaskEnum for DINode::DIFlags for the following purposes:
* Get rid of unsigned int for flags to avoid problems on platforms with sizeof(int) < 4
* Flags are now strongly typed
Patch by: Victor Leschuk <vleschuk@gmail.com>
Differential Revision: https://reviews.llvm.org/D23766
llvm-svn: 280686
All of the builtins are designed to be invoked with ARM AAPCS CC even on ARM
AAPCS VFP CC hosts. Tweak the default initialisation to ARM AAPCS CC rather
than C CC for ARM/thumb targets.
The changes to the tests are necessary to ensure that the calling convention for
the lowered library calls are honoured. Furthermore, these adjustments cause
certain branch invocations to change to branch-and-link since the returned value
needs to be moved across registers (d0 -> r0, r1).
llvm-svn: 280683
Summary:
Move early uses of spilled variables after CoroBegin.
For example, if a parameter had address taken, we may end up with the code
like:
define @f(i32 %n) {
%n.addr = alloca i32
store %n, %n.addr
...
call @coro.begin
This patch fixes the problem by moving uses of spilled variables after CoroBegin.
Reviewers: majnemer
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D24234
llvm-svn: 280678
The code is now written in terms of source and dest classes with feature checks inside each type of copy instead of having separate functions for each feature set.
llvm-svn: 280673
Previously we were extending to copying the whole ZMM register. The register allocator shouldn't use XMM16-31 or YMM16-31 in this configuration as the instructions to spill them aren't available.
llvm-svn: 280648
Summary:
A frontend may designate a particular suspend to be final, by setting the second argument of the coro.suspend intrinsic to true. Such a suspend point has two properties:
* it is possible to check whether a suspended coroutine is at the final suspend point via coro.done intrinsic;
* a resumption of a coroutine stopped at the final suspend point leads to undefined behavior. The only possible action for a coroutine at a final suspend point is destroying it via coro.destroy intrinsic.
This patch adds final suspend handling logic to CoroEarly and CoroSplit passes.
Now, the final suspend point example from docs\Coroutines.rst compiles and produces expected result (see test/Transform/Coroutines/ex5.ll).
Reviewers: majnemer
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D24068
llvm-svn: 280646
The only way to select them was in AVX512 mode because EVEX VMOVSS/SD was below them and the patterns weren't qualified properly for AVX only. So if you happened to have an aligned FR32/FR64 load in AVX512 you could get a VEX encoded VMOVAPS/VMOVAPD.
I tried to search back through history and it seems like these instructions were probably unselectable for at least 5 years, at least to the time the VEX versions were added. But I can't prove they ever were.
llvm-svn: 280644
The transform in question:
icmp (and (trunc W), C2), C1 -> icmp (and W, C2'), C1'
...is still not enabled for vectors, thus no functional change intended.
It's not clear to me if this is a good transform for vectors or even
scalars in general. Changing that behavior may be a follow-on patch.
llvm-svn: 280627
We used to compute the padding contributions to the block sizes during branch
relaxation only at the start of the transformation. As we perform branch
relaxation, we change the sizes of the blocks, and so the amount of inter-block
padding might change. Accordingly, we need to recompute the (alignment-based)
padding in between every iteration on our way toward the fixed point.
Unfortunately, I don't have a test case (and none was provided in the bug
report), and while this obviously seems needed, algorithmically, I don't have
any way of generating a small and/or non-fragile regression test.
llvm-svn: 280626
make_scope_exit now that we have that utility.
This makes the code much more clear and readable by isolating the check.
It also makes it easy to go through and make sure all the interesting
update routines have a start and end verify so we don't slowly let the
graph drift into an invalid state.
llvm-svn: 280619
a postorder-sequence based update after edge insertion into a generic
helper function.
This separates the SCC-specific logic into two fairly simple lambdas and
extracts the rest into a generic helper template function. I think this
is a net win on its own merits because it disentangles different pieces
of the algorithm. Now there is one place that does the two-step
partition to identify a set of newly connected components and at the
same time update the postorder sequence.
However, I'm also hoping to re-use this an upcoming patch to update
a cached post-order sequence of RefSCCs when doing the analogous update
to the RefSCC graph, and I don't want to have two copies.
The diff is quite messy but this really is just moving things around and
making types generic rather than specific.
llvm-svn: 280618
memcpy with ld/st.
When InstCombine replaces a memcpy with loads+stores it does not copy over the
llvm.mem.parallel_loop_access from the memcpy instruction. This patch fixes
that.
Differential Revision: https://reviews.llvm.org/D23499
llvm-svn: 280617
ObjectCache is an ExecutionEngine utility, so its anchor belongs there. The
practical impact of this change is that ORC users no longer need to link MCJIT
to use ObjectCaches.
llvm-svn: 280616
As it turns out, whether we zero-extend or sign-extend i8/i16 constants, which
are illegal types promoted to i32 on PowerPC, is a choice constrained by
assumptions within the infrastructure. Specifically, the logic in
FunctionLoweringInfo::ComputePHILiveOutRegInfo assumes that constant PHI
operands will be zero extended, and so, at least when materializing constants
that are PHI operands, we must do the same.
The rest of our fast-isel implementation does not appear to depend on the fact
that we were sign-extending i8/i16 constants, and all other targets also appear
to zero-extend small-bitwidth constants in fast-isel; we'll now do the same (we
had been doing this only for i1 constants, and sign-extending the others).
Fixes PR27721.
llvm-svn: 280614
Summary:
The inliner may need to determine where a given funclet unwinds to,
and this determination may depend on other funclets throughout the
funclet tree. The code that performs this walk in getUnwindDestToken
memoizes results to avoid redundant computations. In the case that
a funclet's unwind destination is derived from its ancestor, there's
code to walk back down the tree from the ancestor updating the memo
map of its descendants to record the unwind destination. This change
fixes that code to account for the case that some descendant has a
different unwind destination, which can happen if that unwind dest
is a descendant of the EHPad being queried and thus didn't determine
its unwind destination.
Also update test inline-funclets.ll, which is supposed to cover such
scenarios, to include a case that fails an assertion without this fix
but passes with it.
Fixes PR29151.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24117
llvm-svn: 280610
CGP currently drops select's MD_prof profile data when
generating conditional branch which can lead to bad
code layout. The patch fixes the issue.
Differential Revision: http://reviews.llvm.org/D24169
llvm-svn: 280600
