add_definitions shouldn't really be used for compiler flags, and the variable
LLVM_DEFINITIONS is not appropriately used at the moment, e.g. it's not exported
to LLVMConfig.cmake
llvm-svn: 203792
I personally build with these settings enabled all the time, and it
is clearer to see the actual warning flags (e.g., -Wuninitialized)
get passed by Xcode rather than seeing -Wno-uninitialized followed
by -Wall (the latter canceling out the former) and figuring out
what is going on.
Xcode will ignore build settings it doesn't understand, so this will
work on possibly older versions of Xcode that don't support all
of these settings.
llvm-svn: 203760
target_link_libraries(INTERFACE) doesn't bring inter-target dependencies in add_library,
although final targets have dependencies to whole dependent libraries.
It makes most libraries can be built in parallel.
target_link_libraries(PRIVATE) is used to shaared library.
Each dependent library is linked to the target.so, and its user will not see its grandchildren.
For example,
- libclang.so has sufficient libclang*.a(s).
- c-index-test requires just only libclang.so.
FIXME: lld is tweaked minimally. Adding INTERFACE in each library would be better thing.
llvm-svn: 202241
The LLVMSupport library implementation consolidates all dependencies on
system libraries. Move the logic gathering system libraries out of
'cmake/modules/LLVM-Config.cmake' and into 'lib/Support/CMakeLists.txt'.
Use the target_link_libraries() command there to tell CMake about the
link dependencies of the LLVMSupport implementation. CMake will
automatically propagate this to all targets that link LLVMSupport
directly or indirectly.
We still need to build knowledge of system library dependencies into
'llvm-config'. Store the list of libraries needed in a property on
LLVMSupport and teach 'tools/llvm-config/CMakeLists.txt' to retrieve it
from there.
Drop all calls to 'link_system_libs' and 'get_system_libs' from our
CMake code. Replace their implementations with a warning that explains
the calls are no longer necessary. Also drop from 'LLVMConfig.cmake'
the HAVE_* and related variables that were published there only to allow
'get_system_libs' to run outside our build process.
Contributed by Brad King.
llvm-svn: 201969
llvm_add_library(foo SHARED STATIC
DEPENDS <dependent targets...>
LINK_LIBS <required libraries...>
)
It generates both foo (foo.so) and foo_static(foo.a) and both of them depend on DEPENDS and LINK_LIBS.
Then, also obj.foo is generated. obj.foo depends on DEPENDS, but doesn't depend on LINK_LIBS.
llvm-svn: 201854
The module still needs to collect the list of all available libraries
in order to satisfy the 'all' component. Provide this in the package
configuration file, 'LLVMConfig.cmake', as a LLVM_AVAILABLE_LIBS
variable. (A variable is scoped better than a global property.)
Since this won't be set for our own build, fall back to looking up the
LLVM_LIBS property to get the value when it is not set.
Contributed by Brad King.
llvm-svn: 201853
LLVM library names are now available as logical CMake targets both
to our own build and to application CMake code. Replace use of
'list(FIND)' with a simple 'if(TARGET)' to determine whether a
library is available.
Contributed by Brad King.
llvm-svn: 201852
On unsupported platforms, llvm_add_library(MODULE) doesn't create any targets.
Caller may be responsible to check and add extra target properties.
llvm-svn: 201320
FIXME: llvm/test may be aware of LLVM_PLUGIN_EXT, like as clang/test does.
FIXME: CMAKE_*_SUFFIX may be set in HandleLLVMOptions if those variables could be writable, rather than to set one as target properties.
llvm-svn: 201316
I was insightless then about unknown optional parameters.
(Consider that LINK_LIBS foo bar ADDITIONAL_HEADERS qux quux)
Suggested by Michael Kruse. Thanks!
llvm-svn: 201283
This macro depends on several variables to be set in the calling
context. Check them and report an error if they are not set.
Without this, custom commands may be silently specified that
will fail at build time.
Patch by Brad King.
llvm-svn: 201229
- MODULE;SHARED;STATIC
STATIC by default w/o BUILD_SHARED_LIBS.
SHARED by default w/ BUILD_SHARED_LIBS.
- OUTPUT_NAME name
Corresponds to OUTPUT_NAME in target properties.
- DEPENDS targets...
Same semantics as add_dependencies().
- LINK_COMPONENTS components...
Same as the variable LLVM_LINK_COMPONENTS.
- LINK_LIBS lib_targets...
Same semantics as target_link_libraries().
- ADDITIONAL_HEADERS (implemented in LLVMProcessSources)
May specify header files for IDE generators.
I suggest llvm_add_library() may be used for inter-project add_library stuff
and also suggest add_***_library() may be used project-specific.
Please be patient that llvm_add_library might be ambiguous against add_llvm_library.
llvm-svn: 201072
I am sure it'd not be required any more.
In trunk, all of tablegen's users depend on ${TABLEGEN_OUTPUT} as not file dependency but inter-target dependency.
llvm-svn: 201063
CMake's target_link_libraries() will manage dependencies with Brad's LLVMConfig improvements.
Configuration time may be reduced by a few seconds.
llvm-svn: 201062
Teach the Makefile build system to generate and install CMake modules
LLVMConfig.cmake and LLVMConfigVersion.cmake so that applications that
build with CMake can use 'find_package(LLVM)' even when LLVM is not
built with CMake. These modules tell such applications about available
LLVM libraries and their dependencies.
Run llvm-config to generate the list of libraries and use the results of
llvm-build to generate the library dependencies. Use sed to perform
substitutions in the LLVMConfig.cmake.in and LLVMConfigVersion.cmake.in
sources that our CMake build system uses.
Teach the Makefile build system to generate the LLVMExports.cmake file
with content similar to that produced by the CMake install(EXPORT)
command. Extend llvm-build with an option to generate the library
dependencies fragment for this file.
Contributed by Brad King.
llvm-svn: 201053
Teach each package configuration file to load the LLVMExports file for
its corresponding tree. This will allow application CMake code to use
logical library and executable target names from LLVM as if they were in
our own build process (e.g. LLVMSupport). CMake will have enough
information to propagate LLVM library link dependencies automatically
while configuring applications.
Contributed by Brad King.
llvm-svn: 201051
Record every logical target that we install with install(TARGETS) in a
global LLVM_EXPORTS property. Then use the export(TARGETS) command to
provide a "LLVMExports.cmake" file that exports logical targets for
import into applications directly from our build tree.
The "LLVMExports.cmake" file is not meant for direct inclusion by
application code but should be included by "LLVMConfig.cmake" in a
future change.
Contributed by Brad King.
llvm-svn: 201050
Use the install(TARGETS) command EXPORT option for every library and
executable that we install with LLVM. Then use the install(EXPORT)
command to provide a "LLVMExports.cmake" file that exports logical
targets for import into applications from our install tree.
The "LLVMExports.cmake" file is not meant for direct inclusion by
application code but should be included by "LLVMConfig.cmake" in a
future change.
Contributed by Brad King.
llvm-svn: 201049
Create separate package configuration files "LLVMConfig.cmake" for the
LLVM build and install trees so that each can have information specific
to its tree. Configure each with the corresponding include, lib, and
cmake directories. Include the "LLVM-Config" API modules directly from
the configured cmake modules directory.
In the install tree, compute the installation prefix relative to the
file location. In the build tree, provide information specific to the
build tree for use by tools like Clang that can build externally against
the LLVM build tree. Prefix such values in "LLVM_BUILD_" and comment
them as such.
Contributed by Brad King.
llvm-svn: 201048
Do not modify this value on the application's behalf and just ensure API
modules are always available next to the LLVMConfig module. This is
already the case in the install tree so use file(COPY) to make it so in
the build tree. Include the LLVM-Config API module from next to the
LLVMConfig location.
Contributed by Brad King.
llvm-svn: 201047
CMake won't expand the dependency graph for us if the dependencies are in
another project, which leads to link errors in the standalone build.
This is a refinement of r200765.
llvm-svn: 200812
r200744 moved this into cmake/config-ix.cmake, so that it would happen very
early in the build process. However, standalone builds of Clang and other
external projects never include this file (which is correct).
Now, -stdlib=libc++ and the LLVM_COMPILER_IS_GCC_COMPATIBLE option are
both set in a new include file, HandleLLVMStdlib, which is included by
both config-ix.cmake and HandleLLVMOptions.cmake. This preserves existing
behavior for projects relying on HandleLLVMOptions and still does the
right thing for builds of LLVM itself.
llvm-svn: 200811
In trunk, every users assume add_llvm_loadable_module as "loadable module" and no one sets neither SHARED, ... nor also MODULE!
Unfortunately, all loadable modules were linked as not "MODULE" but "SHARED".
If this change caused any regressions, I wish guys to fix it properly. ;)
llvm-svn: 200762
