Basic implementation for call and jmp branches with 32 bit offset. Branches to local targets produce
Branch32 edges that are resolved like a regular PCRel32 relocations. Branches to external (undefined)
targets produce Branch32ToStub edges and go through a PLT entry by default. If the target happens to
get resolved within the 32 bit range from the callsite, the edge is relaxed during post-allocation
optimization. There is a test for each of these cases.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D90331
We have been producing R_X86_64_REX_GOTPCRELX (MOV64rm/TEST64rm/...) and
R_X86_64_GOTPCRELX for CALL64m/JMP64m without the REX prefix since 2016 (to be
consistent with GNU as), but not for MOV32rm/TEST32rm/...
Root cause of the test failure was fixed with:
[JITLink][ELF] PCRel32GOTLoad edge offset can be smaller three
This reverts commit 10b1a61bafba39fd7400a814a7272f41222ad579.
Symbols with special section index SHN_COMMON (0xfff2) haven't been handled so far and caused an invalid section error.
This is a more or less straightforward use of the code commented out at the end of the function. I checked with the ELF spec, that the symbol value gives the alignment.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D89795
The difference is that the former are indirect and go to the GOT while the latter go to the target directly. This info can be used to relax indirect ones that don't need the GOT (because the target is in range). We check for this optimization beforehand. For formal correctness and to avoid confusion, we should only change the relocation kind if we actually apply the relaxation.
This re-applies e2fceec2fd1 with fixes. Apparently we already *do* support
relaxation for ELF, so we need to make sure the test case allocates a slab at
a fixed address, and that the R_X86_64_REX_GOTPCRELX test references an external
that is guaranteed to be out of range.
This patch breaks Orc.h up into Orc.h, LLJIT.h and OrcEE.h.
Orc.h contain core Orc utilities.
LLJIT.h contains LLJIT specific types and functions.
OrcEE.h contains types and functions that depend on ExecutionEngine.
The intent is that these headers should match future library divisions: Clients
who only use Orc.h should only need to link againt the Orc core libraries,
clients using LLJIT.h will also need to link against LLVM core, and clients
using OrcEE.h will also have to link against ExecutionEngine.
In addition to breaking up the Orc.h header this patch introduces functions to:
(1) Set the object linking layer creation function on LLJITBuilder.
(2) Create an RTDyldObjectLinkingLayer instance (particularly for use in (1)).
(3) Register JITEventListeners with an RTDyldObjectLinkingLayer.
Together (1), (2) and (3) can be used to force use of RTDyldObjectLinkingLayer
as the underlying JIT linker for LLJIT, rather than the platform default, and
to register event listeners with the RTDyldObjectLinkingLayer.
C API clients can now define a custom definition generator by providing a
callback function (to implement DefinitionGenerator::tryToGenerate) and context
object. All arguments for the DefinitionGenerator::tryToGenerate method have
been given C API counterparts, and the API allows for optionally asynchronous
generation.
Symbol string pool entries are ref counted, but not automatically cleared.
This can cause the size of the pool to grow without bound if it's not
periodically cleared. These functions allow that to be done via the C API.
This patch moves definition generation out from the session lock, instead
running it under a per-dylib generator lock. It also makes the
DefinitionGenerator::tryToGenerate method optionally asynchronous: Generators
are handed an opaque LookupState object which can be captured to stop/restart
the lookup process.
The new scheme provides the following benefits and guarantees:
(1) Queries that do not need to attempt definition generation (because all
requested symbols matched against existing definitions in the JITDylib)
can proceed without being blocked by any running definition generators.
(2) Definition generators can capture the LookupState to continue their work
asynchronously. This allows generators to run for an arbitrary amount of
time without blocking a thread. Definition generators that do not need to
run asynchronously can return without capturing the LookupState to eliminate
unnecessary recursion and improve lookup performance.
(3) Definition generators still do not need to worry about concurrency or
re-entrance: Since they are still run under a (per-dylib) lock, generators
will never be re-entered concurrently, or given overlapping symbol sets to
generate.
Finally, the new system distinguishes between symbols that are candidates for
generation (generation candidates) and symbols that failed to match for a query
(due to symbol visibility). This fixes a bug where an unresolved symbol could
trigger generation of a duplicate definition for an existing hidden symbol.
MaterializationResponsibility, JITDylib, and ExecutionSession collectively
manage the OrcV2 core JIT state. Responsibility for maintaining and
updating this state has previously been spread among these classes, resulting
in implementations that are each non-trivial, but all tightly coupled. This has
in turn made reading the code and reasoning about state update and locking
rules difficult.
The core state model can be simplified by thinking of
MaterializationResponsibility and JITDylib as facets of ExecutionSession. This
commit is the first in a series intended to refactor Core.cpp to reflect this
model. Operations on MaterializationResponsibility and JITDylib will forward to
implementation methods inside ExecutionSession. Raw state will remain with the
original classes, but in most cases will only be modified by the
ExecutionSession.
This patch updates the Kaleidoscope and BuildingAJIT tutorial series (chapter
1-4) to OrcV2. Chapter 5 of the BuildingAJIT series is removed -- it will be
re-instated once we have in-tree support for out-of-process JITing.
This patch only updates the tutorial code, not the text. Patches welcome for
that, otherwise I will try to update it in a few weeks.
This patch introduces new APIs to support resource tracking and removal in Orc.
It is intended as a thread-safe generalization of the removeModule concept from
OrcV1.
Clients can now create ResourceTracker objects (using
JITDylib::createResourceTracker) to track resources for each MaterializationUnit
(code, data, aliases, absolute symbols, etc.) added to the JIT. Every
MaterializationUnit will be associated with a ResourceTracker, and
ResourceTrackers can be re-used for multiple MaterializationUnits. Each JITDylib
has a default ResourceTracker that will be used for MaterializationUnits added
to that JITDylib if no ResourceTracker is explicitly specified.
Two operations can be performed on ResourceTrackers: transferTo and remove. The
transferTo operation transfers tracking of the resources to a different
ResourceTracker object, allowing ResourceTrackers to be merged to reduce
administrative overhead (the source tracker is invalidated in the process). The
remove operation removes all resources associated with a ResourceTracker,
including any symbols defined by MaterializationUnits associated with the
tracker, and also invalidates the tracker. These operations are thread safe, and
should work regardless of the the state of the MaterializationUnits. In the case
of resource transfer any existing resources associated with the source tracker
will be transferred to the destination tracker, and all future resources for
those units will be automatically associated with the destination tracker. In
the case of resource removal all already-allocated resources will be
deallocated, any if any program representations associated with the tracker have
not been compiled yet they will be destroyed. If any program representations are
currently being compiled then they will be prevented from completing: their
MaterializationResponsibility will return errors on any attempt to update the
JIT state.
Clients (usually Layer writers) wishing to track resources can implement the
ResourceManager API to receive notifications when ResourceTrackers are
transferred or removed. The MaterializationResponsibility::withResourceKeyDo
method can be used to create associations between the key for a ResourceTracker
and an allocated resource in a thread-safe way.
RTDyldObjectLinkingLayer and ObjectLinkingLayer are updated to use the
ResourceManager API to enable tracking and removal of memory allocated by the
JIT linker.
The new JITDylib::clear method can be used to trigger removal of every
ResourceTracker associated with the JITDylib (note that this will only
remove resources for the JITDylib, it does not run static destructors).
This patch includes unit tests showing basic usage. A follow-up patch will
update the Kaleidoscope and BuildingAJIT tutorial series to OrcV2 and will
use this API to release code associated with anonymous expressions.
This removes all legacy layers, legacy utilities, the old Orc C bindings,
OrcMCJITReplacement, and OrcMCJITReplacement regression tests.
ExecutionEngine and MCJIT are not affected by this change.
Report a fatal error if an IMAGE_REL_AMD64_ADDR32NB cannot be applied due to an
out-of-range target. Previously we emitted a diagnostic to llvm::errs and
continued.
Patch by Dale Martin. Thanks Dale!
This patch enables basic BSS section handling, and improves a couple of error
messages in the ELF section parsing code.
Patch by Christian Schafmeister. Thanks Christian!
Differential Revision: https://reviews.llvm.org/D88867
`ELFFile<ELFT>` has many methods that take pointers,
though they assume that arguments are never null and
hence could take references instead.
This patch performs such clean-up.
Differential revision: https://reviews.llvm.org/D87385
Making MaterializationResponsibility instances immovable allows their
associated VModuleKeys to be updated by the ExecutionSession while the
responsibility is still in-flight. This will be used in the upcoming
removable code feature to enable safe merging of resource keys even if
there are active compiles using the keys being merged.
TPCDynamicLibrarySearchGenerator was generating errors on missing
symbols, but that doesn't fit the DefinitionGenerator contract: A symbol
that isn't generated by a particular generator should not cause an
error.
This commit fixes the error by using SymbolLookupFlags::WeaklyReferencedSymbol
for all elements of the lookup, and switches llvm-jitlink to use
TPCDynamicLibrarySearchGenerator.
If there's no initializer symbol in the current MaterializationResponsibility
then bail out without installing JITLink passes: they're going to be no-ops
anyway.
A think-o in the existing code meant that dependencies were never registered.
This failure could lead to crashes rather than orderly error propagation if
initialization dependencies failed to materialize.
No test case: The bug was discovered in an out-of-tree code and requires
pathalogically misconfigured JIT to generate the original error that lead to
the crash.
DFS and Reverse-DFS linkage orders are used to order execution of
deinitializers and initializers respectively.
This patch replaces uses of special purpose DFS order functions in
MachOPlatform and LLJIT with uses of the new methods.
The functions `__register_frame`/`__deregister_frame` are not
available on z/OS, so add a guard to not use them.
Reviewed By: lhames, abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D84787
MachOLinkGraphBuilder has been treating these as hidden, but they should be
treated as local.
Symbols with N_PEXT set and N_EXT unset are produced when hidden symbols are
run through 'ld -r' without passing -keep_private_externs. They will show up
under 'nm -m' as "was private extern", hence the name of the test cases.
Testcase commited as relocatable object to ensure that the test suite doesn't
depend on having 'ld -r' available.
This loop caused me a little headache once, because I didn't see the assigned variable is a member. The refactored version appears more readable to me.
Differential Revision: https://reviews.llvm.org/D85922
