[DAG] Previously debug values would transfer debuginfo for the selected
start node for a replacement which allows for debug to be dropped.
Push debug value transfer to occur with node/value replacement in
SelectionDAG, remove now extraneous transfers of debug values.
This refixes PR9817 which was being incompletely checked in the
testsuite.
Reviewers: jyknight
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D21037
llvm-svn: 272792
Summary:
Now DISubroutineType has a 'cc' field which should be a DW_CC_ enum. If
it is present and non-zero, the backend will emit it as a
DW_AT_calling_convention attribute. On the CodeView side, we translate
it to the appropriate enum for the LF_PROCEDURE record.
I added a new LLVM vendor specific enum to the list of DWARF calling
conventions. DWARF does not appear to attempt to standardize these, so I
assume it's OK to do this until we coordinate with GCC on how to emit
vectorcall convention functions.
Reviewers: dexonsmith, majnemer, aaboud, amccarth
Subscribers: mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D21114
llvm-svn: 272197
As discovered in PR27758, GDB does not fully support the DWARF 4 format.
This patch ensures we always emit bitfields in the DWARF 2 when tuning for GDB.
llvm-svn: 269827
The DWARF spec states that a member entry may have either a
DW_AT_data_member_location or a DW_AT_data_bit_offset, but not both.
This fixes a bug found in PR 27758.
llvm-svn: 269731
The DWARF spec clearly states that a bit field member should have either a
DW_AT_byte_size or a DW_AT_bit_size, but not both.
Also the DW_AT_byte_size is redundant with the size of the type of the member.
This fixes a bug found in PR 27758.
llvm-svn: 269714
for the same subprogram.
This fixes a bug where DW_AT_abstract_origin is being emitted twice for
the same subprogram if a function is both inlined and emitted in the same
translation unit, by restoring the pre-r266446 behavior.
http://reviews.llvm.org/D20072
llvm-svn: 269103
Summary:
This is the follow-up patch for http://reviews.llvm.org/D19436
* Update the discriminator reading algorithm to match the assignment algorithm.
* Add test to cover the new algorithm.
Reviewers: dnovillo, echristo, dblaikie
Subscribers: danielcdh, dblaikie, echristo, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19522
llvm-svn: 267945
The DWARF2 specification of DW_AT_bit_offset was written from the perspective of
a big-endian machine with unclear semantics for other systems. DWARF4
deprecated DW_AT_bit_offset and introduced a new attribute DW_AT_data_bit_offset
that simply counts the number of bits from the beginning of the containing
entity regardless of endianness.
After this patch LLVM emits DW_AT_bit_offset for DWARF 2 or 3 and
DW_AT_data_bit_offset when DWARF 4 or later is requested.
llvm-svn: 267895
in a debug-info-bearing function has a debug location attached to it. Failure to
do so causes an "!dbg attachment points at wrong subprogram for function"
assertion failure when the inliner sets up inline scope info.
rdar://problem/25878916
This reaplies r267320 without changes after fixing an issue in the OpenMP IR
generator in clang.
llvm-svn: 267370
in a debug-info-bearing function has a debug location attached to it. Failure to
do so causes an "!dbg attachment points at wrong subprogram for function"
assertion failure when the inliner sets up inline scope info.
rdar://problem/25878916
llvm-svn: 267320
Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifier:', and DIBuilder no longer retains all types with an
'identifier:' automatically.
Aside from the bitcode upgrade, this is mainly removing logic to resolve
an MDString-based reference to an actualy DIType. The commits leading
up to this have made the implicit type map in DICompileUnit's
'retainedTypes:' field superfluous.
This does not remove DITypeRef, DIScopeRef, DINodeRef, and
DITypeRefArray, or stop using them in DI-related metadata. Although as
of this commit they aren't serving a useful purpose, there are patchces
under review to reuse them for CodeView support.
The tests in LLVM were updated with deref-typerefs.sh, which is attached
to the thread "[RFC] Lazy-loading of debug info metadata":
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html
llvm-svn: 267296
Before this fix, DILexicalBlockFile entries were skipped only in some cases and were not in other cases.
Differential Revision: http://reviews.llvm.org/D18724
llvm-svn: 267004
With this change, ideally IR pass can always generate llvm.stackguard
call to get the stack guard; but for now there are still IR form stack
guard customizations around (see getIRStackGuard()). Future SSP
customization should go through LOAD_STACK_GUARD.
There is a behavior change: stack guard values are not CSEed anymore,
since we should never reuse the value in case that it has been spilled (and
corrupted). See ssp-guard-spill.ll. This also cause the change of stack
size and codegen in X86 and AArch64 test cases.
Ideally we'd like to know if the guard created in llvm.stackprotector() gets
spilled or not. If the value is spilled, discard the value and reload
stack guard; otherwise reuse the value. This can be done by teaching
register allocator to know how to rematerialize LOAD_STACK_GUARD and
force a rematerialization (which seems hard), or check for spilling in
expandPostRAPseudo. It only makes sense when the stack guard is a global
variable, which requires more instructions to load. Anyway, this seems to go out
of the scope of the current patch.
llvm-svn: 266806
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
llvm-svn: 266446
This patch drops the debug info for all DISubprograms that are
(a) not attached to an llvm::Function and
(b) not indirectly reachable via inline scopes from any surviving Function and
(c) not reachable from a type (i.e.: member functions).
Background: I'm currently working on a patch to reverse the pointers
between DICompileUnit and DISubprogram (for more info check Duncan's RFC
on lazy-loading of debug info metadata
http://lists.llvm.org/pipermail/llvm-dev/2016-March/097419.html).
The idea is to remove the list of subprograms from DICompileUnit and
instead point to the owning compile unit from each DISubprogram.
After doing this all DISubprograms fulfilling the above criteria will be
implicitly dropped unless we go through an extra effort to preserve them.
http://reviews.llvm.org/D18477
<rdar://problem/25256815>
llvm-svn: 265876
Sample-based profiling and optimization remarks currently remove
DICompileUnits from llvm.dbg.cu to suppress the emission of debug info
from them. This is somewhat of a hack and only borderline legal IR.
This patch uses the recently introduced NoDebug emission kind in
DICompileUnit to achieve the same result without breaking the Verifier.
A nice side-effect of this change is that it is now possible to combine
NoDebug and regular compile units under LTO.
http://reviews.llvm.org/D18808
<rdar://problem/25427165>
llvm-svn: 265861
This patch closes a gap in the DWARF backend that caused LLVM to drop
debug info for floating point variables that were constant for part of
their scope. Floating point constants are emitted as one or more
DW_OP_constu joined via DW_OP_piece.
This fixes a regression caught by the LLDB testsuite that I introduced
in r262247 when we stopped blindly expanding the range of singular
DBG_VALUEs to span the entire scope and started to emit location lists
with accurate ranges instead.
Also deletes a now-impossible testcase (debug-loc-empty-entries).
<rdar://problem/25448338>
llvm-svn: 265760
This mostly cosmetic patch moves the DebugEmissionKind enum from DIBuilder
into DICompileUnit. DIBuilder is not the right place for this enum to live
in — a metadata consumer should not have to include DIBuilder.h.
I also added a Verifier check that checks that the emission kind of a
DICompileUnit is actually legal.
http://reviews.llvm.org/D18612
<rdar://problem/25427165>
llvm-svn: 265077
Now register parameters that aren't saved to the stack or CSRs are
considered dead after the first call. Previously the debugger would show
whatever was in the register.
Fixes PR26589
Reviewers: aprantl
Differential Revision: http://reviews.llvm.org/D17211
llvm-svn: 264429
When multiple DWP files are merged together and duplicate DWO IDs are
found it's currently difficult to give an actionable error message - the
DW_AT_name of the CU could be provided, but might be identical (if the
same source file is built into two different configurations), which
doesn't help the user identify the problem.
When no intermediate DWP files are generated, the path to the two DWO
files could be provided - but is lost once the DWOs are merged into a
DWP.
So, include the name of the DWO (dwo_name) in the split file so that
collissions involving a source CU from a DWP can be better diagnosed.
(improvements to llvm-dwp using this to come shortly)
llvm-svn: 264316
Removing the assertion is safe to do because any module level inline
assembly is always emitted first via AsmPrinter::doInitialization().
http://reviews.llvm.org/D16101
rdar://22690666
llvm-svn: 263033
When a variable is described by a single DBG_VALUE instruction we can
often use a more efficient inline DW_AT_location instead of using a
location list.
This commit makes the heuristic that decides when to apply this
optimization stricter by also verifying that the DBG_VALUE is live at the
entry of the function (instead of just checking that it is valid until
the end of the function).
<rdar://problem/24611008>
llvm-svn: 262247
Summary:
Without this, this command
$ llvm-run llc -stop-after machine-cp -o - <( echo '' )
outputs an error, because we close stdout twice -- once when closing the
file opened for "-o", and again when closing outs().
Also clarify in the outs() definition that you can't ever call it if you
want to open your own raw_fd_ostream on stdout.
Reviewers: jroelofs, tstellarAMD
Subscribers: jholewinski, qcolombet, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17422
llvm-svn: 261286
Summary:
In r257979, I added code to ensure that we wouldn't merge DebugLocEntries if
the pieces they describe overlap. Unfortunately, I failed to cover the case,
where there may have multiple active Expressions in the entry, in which case we
need to make sure that no two values overlap before we can perform the merge.
This fixed PR26148.
Reviewers: aprantl
Differential Revision: http://reviews.llvm.org/D16742
llvm-svn: 259696
I originally reapplied this in 257550, but had to revert again due to bot
breakage. The only change in this version is to allow either the TypeSize
or the TypeAllocSize of the variable to be the one represented in debug info
(hopefully in the future we can figure out how to encode the difference).
Additionally, several bot failures following r257550, were due to
optimizer bugs now fixed in r257787 and r257795.
r257550 commit message was:
```
The follow extra changes were made to test cases:
Manually making the variable be the actual type instead of a pointer
to avoid pointer-size differences in generic code:
LLVM :: DebugInfo/Generic/2010-03-24-MemberFn.ll
LLVM :: DebugInfo/Generic/2010-04-06-NestedFnDbgInfo.ll
LLVM :: DebugInfo/Generic/2010-05-03-DisableFramePtr.ll
LLVM :: DebugInfo/Generic/varargs.ll
Delete sizing information from debug info for the same reason
(but the presence of the pointer was important to the test case):
LLVM :: DebugInfo/Generic/restrict.ll
LLVM :: DebugInfo/Generic/tu-composite.ll
LLVM :: Linker/type-unique-type-array-a.ll
LLVM :: Linker/type-unique-simple2.ll
Fixing an incorrect DW_OP_deref
LLVM :: DebugInfo/Generic/2010-05-03-OriginDIE.ll
Fixing a missing DW_OP_deref
LLVM :: DebugInfo/Generic/incorrect-variable-debugloc.ll
Additionally, clang should no longer complain during bootstrap should no
longer happen after r257534.
The original commit message was:
``
Summary:
Teach the Verifier to make sure that the storage size given to llvm.dbg.declare
or the value size given to llvm.dbg.value agree with what is declared in
DebugInfo. This is implicitly assumed in a number of passes (e.g. in SROA).
Additionally this catches a number of common mistakes, such as passing a
pointer when a value was intended or vice versa.
One complication comes from stack coloring which modifies the original IR when
it merges allocas in order to make sure that if AA falls back to the IR it gets
the correct result. However, given this new invariant, indiscriminately
replacing one alloca by a different (differently sized one) is no longer valid.
Fix this by just undefing out any use of the alloca in a dbg.declare in this
case.
Additionally, I had to fix a number of test cases. Of particular note:
- I regenerated dbg-changes-codegen-branch-folding.ll from the given source as
it was affected by the bug fixed in r256077
- two-cus-from-same-file.ll was changed to avoid having a variable-typed debug
variable as that would depend on the target, even though this test is
supposed to be generic
- I had to manually declared size/align for reference type. See also the
discussion for D14275/r253186.
- fpstack-debuginstr-kill.ll required changing `double` to `long double`
- most others were just a question of adding OP_deref
``
```
llvm-svn: 257850
The follow extra changes were made to test cases:
Manually making the variable be the actual type instead of a pointer
to avoid pointer-size differences in generic code:
LLVM :: DebugInfo/Generic/2010-03-24-MemberFn.ll
LLVM :: DebugInfo/Generic/2010-04-06-NestedFnDbgInfo.ll
LLVM :: DebugInfo/Generic/2010-05-03-DisableFramePtr.ll
LLVM :: DebugInfo/Generic/varargs.ll
Delete sizing information from debug info for the same reason
(but the presence of the pointer was important to the test case):
LLVM :: DebugInfo/Generic/restrict.ll
LLVM :: DebugInfo/Generic/tu-composite.ll
LLVM :: Linker/type-unique-type-array-a.ll
LLVM :: Linker/type-unique-simple2.ll
Fixing an incorrect DW_OP_deref
LLVM :: DebugInfo/Generic/2010-05-03-OriginDIE.ll
Fixing a missing DW_OP_deref
LLVM :: DebugInfo/Generic/incorrect-variable-debugloc.ll
Additionally, clang should no longer complain during bootstrap should no
longer happen after r257534.
The original commit message was:
```
Summary:
Teach the Verifier to make sure that the storage size given to llvm.dbg.declare
or the value size given to llvm.dbg.value agree with what is declared in
DebugInfo. This is implicitly assumed in a number of passes (e.g. in SROA).
Additionally this catches a number of common mistakes, such as passing a
pointer when a value was intended or vice versa.
One complication comes from stack coloring which modifies the original IR when
it merges allocas in order to make sure that if AA falls back to the IR it gets
the correct result. However, given this new invariant, indiscriminately
replacing one alloca by a different (differently sized one) is no longer valid.
Fix this by just undefing out any use of the alloca in a dbg.declare in this
case.
Additionally, I had to fix a number of test cases. Of particular note:
- I regenerated dbg-changes-codegen-branch-folding.ll from the given source as
it was affected by the bug fixed in r256077
- two-cus-from-same-file.ll was changed to avoid having a variable-typed debug
variable as that would depend on the target, even though this test is
supposed to be generic
- I had to manually declared size/align for reference type. See also the
discussion for D14275/r253186.
- fpstack-debuginstr-kill.ll required changing `double` to `long double`
- most others were just a question of adding OP_deref
```
llvm-svn: 257550
Summary:
Teach the Verifier to make sure that the storage size given to llvm.dbg.declare
or the value size given to llvm.dbg.value agree with what is declared in
DebugInfo. This is implicitly assumed in a number of passes (e.g. in SROA).
Additionally this catches a number of common mistakes, such as passing a
pointer when a value was intended or vice versa.
One complication comes from stack coloring which modifies the original IR when
it merges allocas in order to make sure that if AA falls back to the IR it gets
the correct result. However, given this new invariant, indiscriminately
replacing one alloca by a different (differently sized one) is no longer valid.
Fix this by just undefing out any use of the alloca in a dbg.declare in this
case.
Additionally, I had to fix a number of test cases. Of particular note:
- I regenerated dbg-changes-codegen-branch-folding.ll from the given source as
it was affected by the bug fixed in r256077
- two-cus-from-same-file.ll was changed to avoid having a variable-typed debug
variable as that would depend on the target, even though this test is
supposed to be generic
- I had to manually declared size/align for reference type. See also the
discussion for D14275/r253186.
- fpstack-debuginstr-kill.ll required changing `double` to `long double`
- most others were just a question of adding OP_deref
Reviewers: aprantl
Differential Revision: http://reviews.llvm.org/D14276
llvm-svn: 257105
Summary:
In rL242338, debugger tuning was introduced, and the tuning for FreeBSD
was set to lldb by default. However, for the foreseeable future we
still need to default to gdb tuning, since lldb is not ready for all of
FreeBSD's architectures, and some system tools (like objcopy, etc) have
not yet been adapted to cope with the lldb tuned format, which has
.apple sections.
Therefore, let FreeBSD use gdb by default for now.
Reviewers: emaste, probinson
Subscribers: llvm-commits, emaste
Differential Revision: http://reviews.llvm.org/D15966
llvm-svn: 257103
LiveDebugVariables unconditionally propagates all DBG_VALUE down the
dominator tree, which happens to work fine if there already is another
DBG_VALUE or the DBG_VALUE happends to describe a single-assignment vreg
but is otherwise wrong if the DBG_VALUE is coming from only one of the
predecessors.
In r255759 we introduced a proper data flow analysis scheduled after
LiveDebugVariables that correctly propagates DBG_VALUEs across basic block
boundaries. With the new pass in place, the incorrect propagation in
LiveDebugVariables can be retired witout loosing any of the benefits
where LiveDebugVariables happened to do the right thing.
llvm-svn: 256188
Summary:
First up is instcombine, where in the dbg.declare -> dbg.value conversion,
the llvm.dbg.value needs to be called on the actual loaded value, rather
than the address (since the whole point of this transformation is to be
able to get rid of the alloca). Further, now that that's cleaned up, we
can remove a hack in the backend, that would add an implicit OP_deref if
the argument to dbg.value was an alloca. This stems from before the
existence of DIExpression and is no longer necessary since the deref can
be expressed explicitly.
Now, in order to make sure that the tests pass with this change, we need to
correct the printing of DEBUG_VALUE comments to take into account the
expression, which wasn't taken into account before.
Unfortunately, for both these changes, there were a number of incorrect
test cases (mostly the wrong number of DW_OP_derefs, but also a couple
where the test itself was broken more badly). aprantl and I have gone
through and adjusted these test case in order to make them pass with
these fixes and in some cases to make sure they're actually testing
what they are meant to test.
Reviewers: aprantl
Subscribers: dsanders
Differential Revision: http://reviews.llvm.org/D14186
llvm-svn: 256077
