Return early from llvm::isSafeToDestroyConstant() whenever the value
`isa<ConstantData>()`. These constants are shared across the
LLVMContext. We never really want to delete them here, and walking
their use-lists can be very expensive.
(This is motivated by an eventual goal of removing use-lists entirely
from ConstantData.)
llvm-svn: 282320
The additional fix is:
When adding debug information to a lowered phi node in mem2reg
check that we have a valid insertion point after the phi for adding
the debug information.
This change addresses the issue in pr30468 where a lowered phi was
added before a catchswitch and no debug information should be added
after the phi in this case.
Differential Revision: https://reviews.llvm.org/D24797
llvm-svn: 282155
The routines llvm::ConvertDebugDeclareToDebugValue() always returned
a true value which was never checked at the call site; change the
function return type to void.
This NFC cleanup was approved in the review https://reviews.llvm.org/D23715
llvm-svn: 281964
When looking at the scribus_1.3 example from https://llvm.org/bugs/show_bug.cgi?id=10584, I noticed that we were spending a large amount of time computing loop exits in LCSSA. This code appears to be written with the assumption that LoopExits are stored in the Loop and thus cheap to query. This is not true, so we should cache the result across the potentially long running loop which tends to visit a small handful of Loops.
On the particular example from 10584, this change drops the time spent in LCSSA computation by about 80%.
Differential Revision: https://reviews.llvm.org/D24509
llvm-svn: 281949
When phi nodes are created in the -mem2reg phase, the @llvm.dbg.declare
entries are converted to @llvm.dbg.value entries at the place where the
store instructions existed. However no entry is created to describe
the resulting value of the phi node.
The effect of this is especially noticeable in for loops which have a
constant for the intial value; the loop control variable's location
would be described as the intial constant value in the loop body once
the -mem2reg optimization phase was run.
This change adds the creation of the @llvm.dbg.value entries to describe
variables whose location is the result of a phi node created in -mem2reg.
Also when the phi node is finally lowered to a machine instruction it
is important that the lowered "load" instruction is placed before the
associated DEBUG_VALUE entry describing the value loaded.
Differential Revision: https://reviews.llvm.org/D23715
llvm-svn: 281895
We were updating metadata but not IR flags. Because we pick an arbitrary instruction to be the CSE candidate, it comes down to luck (50% or less chance) if this results in broken codegen or not, which is why PR30373 which is actually not the fault of the commit it was bisected down to.
Fixes PR30373.
llvm-svn: 281889
A follow-up patch will rename this pass and the source file accordingly,
but I figured the non-NFC change will be easier to spot in isolation.
Differential Revision: https://reviews.llvm.org/D24641
llvm-svn: 281744
Teach SimplifyLibcalls that in can treat functions annotated with
apcs, aapcs or aapcs_vfp like normal C functions if they only take
and return integer or pointer values, and the target is not iOS.
Differential Revision: https://reviews.llvm.org/D24453
llvm-svn: 281322
This should *actually* fix PR30244. This cranks up the workaround for PR30188 so that we never sink loads or stores of allocas.
The idea is that these should be removed by SROA/Mem2Reg, and any movement of them may well confuse SROA or just cause unwanted code churn. It's not ideal that the midend should be crippled like this, but that unwanted churn can really cause significant regressions in important workloads (tsan).
llvm-svn: 281162
Exposed by PR30244, we will split a block currently if we think we can sink at least one instruction. However this isn't right - the reason we split predecessors is so that we can sink instructions that otherwise couldn't be sunk because it isn't safe to do so - stores, for example.
So, change the heuristic to only split if it thinks it can sink at least one non-speculatable instruction.
Should fix PR30244.
llvm-svn: 281160
This would create a bitcast use which fails the verifier: swifterror values may
only be used by loads, stores, and as function arguments.
rdar://28233244
llvm-svn: 281114
Summary: The hoisted instruction is executed speculatively. It could affect the debugging experience as user would see gdb go into code that may not be expected to execute. It will also affect sample profile accuracy by assigning incorrect frequency to source within then/else branch.
Reviewers: davidxl, dblaikie, chandlerc, kcc, echristo
Subscribers: mehdi_amini, probinson, eric_niebler, andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D24164
llvm-svn: 280995
Refactor replaceDominatedUsesWith to have a flag to control whether to replace uses in BB itself.
Summary: This is in preparation for LoopSink pass which calls replaceDominatedUsesWith to update after sinking.
llvm-svn: 280949
Summary:
When cloning blocks for prologue/epilogue we need to replicate the loop
structure from the original loop. It wasn't a problem for the innermost
loops, but it led to an incorrect loop info when we unrolled a loop with
a child loop - in this case created prologue-loop had a child loop, but
loop info didn't reflect that.
This fixes PR28888.
Reviewers: chandlerc, sanjoy, hfinkel
Subscribers: llvm-commits, silvas
Differential Revision: https://reviews.llvm.org/D24203
llvm-svn: 280901
We can't create metadata-valued PHIs; don't try to do so when sinking.
I created a test case for this using the @llvm.type.test intrinsic, because it
takes a metadata parameter and does not have severe side effects (thus
SimplifyCFG is willing to otherwise sink it).
Previously, running the test case would crash with:
Invalid use of metadata!
%.sink = select i1 %flag, metadata <...>, metadata <0x4e45dc0>
LLVM ERROR: Broken function found, compilation aborted!
llvm-svn: 280866
In failure cases it's not guaranteed that the PHI we're inspecting is actually in the successor block! In this case we need to bail out early, and never query getIncomingValueForBlock() as that will cause an assert.
llvm-svn: 280794
I should have realised this the first time around, but if we're avoiding sinking stores where the operands come from allocas so they don't create selects, we also have to do the same for loads because SROA will be just as defective looking at loads of selected addresses as stores.
Fixes PR30188 (again).
llvm-svn: 280792
PR30292 showed a case where our PHI checking wasn't correct. We were checking that all values were used by the same PHI before deciding to sink, but we weren't checking that the incoming values for that PHI were what we expected. As a result, we had to bail out after block splitting which caused us to never reach a steady state in SimplifyCFG.
Fixes PR30292.
llvm-svn: 280790
Summary:
The inliner may need to determine where a given funclet unwinds to,
and this determination may depend on other funclets throughout the
funclet tree. The code that performs this walk in getUnwindDestToken
memoizes results to avoid redundant computations. In the case that
a funclet's unwind destination is derived from its ancestor, there's
code to walk back down the tree from the ancestor updating the memo
map of its descendants to record the unwind destination. This change
fixes that code to account for the case that some descendant has a
different unwind destination, which can happen if that unwind dest
is a descendant of the EHPad being queried and thus didn't determine
its unwind destination.
Also update test inline-funclets.ll, which is supposed to cover such
scenarios, to include a case that fails an assertion without this fix
but passes with it.
Fixes PR29151.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24117
llvm-svn: 280610
We're sinking stores, which is a good thing, but in the process creating selects for the store address operand, which SROA/Mem2Reg can't look through, which caused serious regressions.
The real fix is in SROA, which I'll be looking into.
llvm-svn: 280470
Summary: This is in preparation for LoopSink pass which calls replaceDominatedUsesWith to update after sinking.
Reviewers: chandlerc, davidxl, danielcdh
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24170
llvm-svn: 280427
This was a real restriction in the original version of SinkIfThenCodeToEnd. Now it's been rewritten, the restriction can be lifted.
As part of this, we handle a very common and useful case where one of the incoming branches is actually conditional. Consider:
if (a)
x(1);
else if (b)
x(2);
This produces the following CFG:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ | /
[ end ]
[end] has two unconditional predecessor arcs and one conditional. The conditional refers to the implicit empty 'else' arc. This same pattern can also be caused by an empty default block in a switch.
We can't sink the call to x() down to end because no call to x() happens on the third incoming arc (assume that x() has sideeffects for the sake of argument; if something is safe to speculate we could indeed sink nevertheless but this cannot happen in the general case and causes many extra selects).
We are now able to detect this case and split off the unconditional arcs to a common successor:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ / |
[sink.split] |
\ /
[ end ]
Now we can sink the call to x() into %sink.split. This can cause significant code simplification in many testcases.
llvm-svn: 280364
r279460 rewrote this function to be able to handle more than two incoming edges and took pains to ensure this didn't regress anything.
This time we change the logic for determining if an instruction should be sunk. Previously we used a single pass greedy algorithm - sink instructions until one requires more than one PHI node or we run out of instructions to sink.
This had the problem that sinking instructions that had non-identical but trivially the same operands needed extra logic so we sunk them aggressively. For example:
%a = load i32* %b %d = load i32* %b
%c = gep i32* %a, i32 0 %e = gep i32* %d, i32 1
Sinking %c and %e would naively require two PHI merges as %a != %d. But the loads are obviously equivalent (and maybe can't be hoisted because there is no common predecessor).
This is why we implemented the fairly complex function areValuesTriviallySame(), to look through trivial differences like this. However it's just not clever enough.
Instead, throw areValuesTriviallySame away, use pointer equality to check equivalence of operands and switch to a two-stage algorithm.
In the "scan" stage, we look at every sinkable instruction in isolation from end of block to front. If it's sinkable, we keep track of all operands that required PHI merging.
In the "sink" stage, we iteratively sink the last non-terminator in the source blocks. But when calculating how many PHIs are actually required to be inserted (to work out if we should stop or not) we remove any values that have already been sunk from the set of PHI-merges required, which allows us to be more aggressive.
This turns an algorithm with potentially recursive lookahead (looking through GEPs, casts, loads and any other instruction potentially not CSE'd) to two linear scans.
llvm-svn: 280351
We iterate over the result from SafeToMergeTerminators, so make it a SmallSetVector instead of a SmallPtrSet.
Should fix stage3 convergence builds.
llvm-svn: 280342
A very important case is not handled here: multiple arcs to a single block with a PHI. Consider:
a:
%1 = icmp %b, 1
br %1, label %c, label %e
c:
%2 = icmp %b, 2
br %2, label %d, label %e
d:
br %e
e:
phi [0, %a], [1, %c], [2, %d]
FoldValueComparisonIntoPredecessors will refuse to fold this, as it doesn't know how to deal with two arcs to a common destination with different PHI values. The answer is obvious - just split all conflicting arcs.
llvm-svn: 280338
We check that a sinking candidate is used by only one PHI node during our legality checks. However for instructions that are used by other sinking candidates our heuristic is less conservative. This can result in a candidate actually being illegal when we come to sink it because of how we sunk a predecessor. Do the used-by-only-one-PHI checks again during sinking to ensure we don't crash.
llvm-svn: 280228
We're sinking stores, which is a good thing, but in the process creating selects for the store address operand, which SROA/Mem2Reg can't look through, which caused serious regressions.
The real fix is in SROA, which I'll be looking into.
llvm-svn: 280219
A very important case is not handled here: multiple arcs to a single block with a PHI. Consider:
a:
%1 = icmp %b, 1
br %1, label %c, label %e
c:
%2 = icmp %b, 2
br %2, label %d, label %e
d:
br %e
e:
phi [0, %a], [1, %c], [2, %d]
FoldValueComparisonIntoPredecessors will refuse to fold this, as it doesn't know how to deal with two arcs to a common destination with different PHI values. The answer is obvious - just split all conflicting arcs.
llvm-svn: 280218
This was a real restriction in the original version of SinkIfThenCodeToEnd. Now it's been rewritten, the restriction can be lifted.
As part of this, we handle a very common and useful case where one of the incoming branches is actually conditional. Consider:
if (a)
x(1);
else if (b)
x(2);
This produces the following CFG:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ | /
[ end ]
[end] has two unconditional predecessor arcs and one conditional. The conditional refers to the implicit empty 'else' arc. This same pattern can also be caused by an empty default block in a switch.
We can't sink the call to x() down to end because no call to x() happens on the third incoming arc (assume that x() has sideeffects for the sake of argument; if something is safe to speculate we could indeed sink nevertheless but this cannot happen in the general case and causes many extra selects).
We are now able to detect this case and split off the unconditional arcs to a common successor:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ / |
[sink.split] |
\ /
[ end ]
Now we can sink the call to x() into %sink.split. This can cause significant code simplification in many testcases.
llvm-svn: 280217
r279460 rewrote this function to be able to handle more than two incoming edges and took pains to ensure this didn't regress anything.
This time we change the logic for determining if an instruction should be sunk. Previously we used a single pass greedy algorithm - sink instructions until one requires more than one PHI node or we run out of instructions to sink.
This had the problem that sinking instructions that had non-identical but trivially the same operands needed extra logic so we sunk them aggressively. For example:
%a = load i32* %b %d = load i32* %b
%c = gep i32* %a, i32 0 %e = gep i32* %d, i32 1
Sinking %c and %e would naively require two PHI merges as %a != %d. But the loads are obviously equivalent (and maybe can't be hoisted because there is no common predecessor).
This is why we implemented the fairly complex function areValuesTriviallySame(), to look through trivial differences like this. However it's just not clever enough.
Instead, throw areValuesTriviallySame away, use pointer equality to check equivalence of operands and switch to a two-stage algorithm.
In the "scan" stage, we look at every sinkable instruction in isolation from end of block to front. If it's sinkable, we keep track of all operands that required PHI merging.
In the "sink" stage, we iteratively sink the last non-terminator in the source blocks. But when calculating how many PHIs are actually required to be inserted (to work out if we should stop or not) we remove any values that have already been sunk from the set of PHI-merges required, which allows us to be more aggressive.
This turns an algorithm with potentially recursive lookahead (looking through GEPs, casts, loads and any other instruction potentially not CSE'd) to two linear scans.
llvm-svn: 280216
This was deliberately disabled during my rewrite of SinkIfThenToEnd to keep behaviour
at least vaguely consistent with the previous version and keep it as close to NFC as
I could.
There's no real reason not to merge sideeffect calls though, so let's do it! Small fixup
along the way to ensure we don't create indirect calls.
Should fix PR28964.
llvm-svn: 280215
Summary: No functional changes, just refactoring to make D23947 simpler.
Reviewers: eugenis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23954
llvm-svn: 279982
We can't mark ORE (a function pass) preserved as required by the loop
passes because that is how we ensure that the required passes like
LazyBFI are all available any time ORE is used. See the new comments in
the patch.
Instead we use it directly just like the inliner does in D22694.
As expected there is some additional overhead after removing the caching
provided by analysis passes. The worst case, I measured was
LNT/CINT2006_ref/401.bzip2 which regresses by 12%. As before, this only
affects -Rpass-with-hotness and not default compilation.
llvm-svn: 279829
