In some cases different alignments for function might be used to save
space e.g. thumb mode with -Oz will try to use 2 byte function
alignment. Similar patch that fixed this in other areas exists here
https://reviews.llvm.org/D46110
This was approved previously https://reviews.llvm.org/D55115 (r348215)
but when committed it caused failures on the sanitizer buildbots when
building llvm with clang (containing this patch). This is now fixed
because I've added a check to see if getting the parent module returns
null if it does then set the alignment to 0.
Differential Revision: https://reviews.llvm.org/D55115
llvm-svn: 348571
In some cases different alignments for function might be used to save
space e.g. thumb mode with -Oz will try to use 2 byte function
alignment. Similar patch that fixed this in other areas exists here
https://reviews.llvm.org/D46110
Differential Revision: https://reviews.llvm.org/D55115
llvm-svn: 348215
Update IR verifier to check the constraint that DIFile source is present on all
files or no files.
Differential Revision: https://reviews.llvm.org/D54953
llvm-svn: 348022
Packing the flags into one bitcode word will save effort in
adding new flags in the future.
Differential Revision: https://reviews.llvm.org/D54755
llvm-svn: 347806
The IEEE-754 Standard makes it clear that fneg(x) and
fsub(-0.0, x) are two different operations. The former is a bitwise
operation, while the latter is an arithmetic operation. This patch
creates a dedicated FNeg IR Instruction to model that behavior.
Differential Revision: https://reviews.llvm.org/D53877
llvm-svn: 346774
Summary:
The NotEligibleToImport flag on the GlobalValueSummary was set if it
isn't legal to import (e.g. because it references unpromotable locals)
and when it can't be inlined (in which case importing is pointless).
I split out the inlinable piece into a separate flag on the
FunctionSummary (doesn't make sense for aliases or global variables),
because in the future we may want to import for reasons other than
inlining.
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D53345
llvm-svn: 346261
Summary:
In D49565/r337503, the type id record writing was fixed so that only
referenced type ids were emitted into each per-module index for ThinLTO
distributed builds. However, this still left an efficiency issue: each
per-module index checked all type ids for membership in the referenced
set, yielding O(M*N) performance (M indexes and N type ids).
Change the TypeIdMap in the summary to be indexed by GUID, to facilitate
correlating with type identifier GUIDs referenced in the function
summary TypeIdInfo structures. This allowed simplifying other
places where a map from type id GUID to type id map entry was previously
being used to aid this correlation.
Also fix AsmWriter code to handle the rare case of type id GUID
collision.
For a large internal application, this reduced the thin link time by
almost 15%.
Reviewers: pcc, vitalybuka
Subscribers: mehdi_amini, inglorion, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51330
llvm-svn: 343021
https://reviews.llvm.org/D42082 introduced variant parts to debug info
in LLVM. Subsequent work on the Rust compiler has found a bug in that
patch; namely, there is a path in MetadataLoader that fails to restore
the discriminator.
This patch fixes the bug.
Patch by: Tom Tromey
Differential revision: https://reviews.llvm.org/D52340
llvm-svn: 342725
Summary:
Some lines have a hit counter where they should not have one.
For example, in C++, some cleanup is adding at the end of a scope represented by a '}'.
So such a line has a hit counter where a user expects to not have one.
The goal of the patch is to add this information in DILocation which is used to get the covered lines in GCOVProfiling.cpp.
A following patch in clang will add this information when generating IR (https://reviews.llvm.org/D49916).
Reviewers: marco-c, davidxl, vsk, javed.absar, rnk
Reviewed By: rnk
Subscribers: eraman, xur, danielcdh, aprantl, rnk, dblaikie, #debug-info, vsk, llvm-commits, sylvestre.ledru
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D49915
llvm-svn: 342631
Summary:
Handle the case IDVal is an empty string.
This bug was uncovered by a LLVM MC Assembler Protocol Buffer
Fuzzer for the RISC-V assembly language.
Reviewers: rnk
Reviewed By: rnk
Subscribers: rnk, niravd, pcc, peter.smith, asb, grosbach, llvm-commits, bcain, kito-cheng, shiva0217, rogfer01, PkmX
Differential Revision: https://reviews.llvm.org/D50808
llvm-svn: 340678
Most users won't have to worry about this as all of the
'getOrInsertFunction' functions on Module will default to the program
address space.
An overload has been added to Function::Create to abstract away the
details for most callers.
This is based on https://reviews.llvm.org/D37054 but without the changes to
make passing a Module to Function::Create() mandatory. I have also added
some more tests and fixed the LLParser to accept call instructions for
types in the program address space.
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D47541
llvm-svn: 340519
Flags in DIBasicType will be used to pass attributes used in
DW_TAG_base_type, such as DW_AT_endianity.
Patch by Chirag Patel!
Differential Revision: https://reviews.llvm.org/D49610
llvm-svn: 339714
Summary:
The AsmWriter was only writing the Args for a ConstVCall if it was
non-empty, however, the LLParser was always expecting it. To aid
in making it optional, surround the ConstVCall VFuncId and Args in
parentheses when writing, then make the Args optional when reading.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49960
llvm-svn: 339637
Summary:
Currently all type ids are emitted into the index file when it is
written. For distributed ThinLTO, that meant that all type ids were
being duplicated into every single distributed index file, regardless of
whether they were referenced, leading to huge amounts of unnecessary
duplication and size bloat.
Keep track of the type id GUIDs actually referenced by the GV summary
records being emitted, and only emit those type IDs.
Add a new test, and fix test/Assembler/thinlto-summary.ll so that all
type ids are referenced to prevent deletion in that test.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, vitalybuka, llvm-commits
Differential Revision: https://reviews.llvm.org/D49565
llvm-svn: 337503
We have located a bug in AssemblyWriter::printModuleSummaryIndex(). This
function outputs path strings incorrectly. Backslashes in the strings
are not correctly escaped.
Consequently, if a path name contains a backslash followed by two
hexadecimal characters, the sequence is incorrectly interpreted when the
output is read by another component. This mangles the path and results
in error.
This patch fixes this issue by calling printEscapedString() to output
the module paths.
Patch by Chris Jackson.
Differential Revision: https://reviews.llvm.org/D49090
llvm-svn: 336908
Not sure why this logic seems to be repeated in 2 different places,
one called by the other.
On AMDGPU addrspace(3) globals start allocating at 0, so these
checks will be incorrect (not that real code actually tries
to compare these addresses)
llvm-svn: 335649
Summary:
Adds assembly parsing support for the module summary index (follow on
to r333335 which added the assembly writing support).
I added support to llvm-as to invoke the index parsing, so that it can
create either a bitcode file with a Module and a per-module index, or
a combined index without a Module.
I will send follow on patches soon to do the following:
- add support to tools such as llvm-lto2 to parse the per-module indexes
from assembly instead of bitcode when testing the thin link.
- verification support.
Depends on D47844 and D47842.
Reviewers: pcc, dexonsmith, mehdi_amini
Subscribers: inglorion, eraman, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D47905
llvm-svn: 335602
Fix a few more bot failures due to r333335:
- don't match path other than file name, since the delimiter is
different for Windows
- The summary IDs in thinlto-function-summary-refgraph.ll may vary
and therefore can't be matched exactly, because the ordering depends
on the iteration order of the index map which is keyed by GUID. The GUID
for private values will depend on the path.
llvm-svn: 333338
Summary:
Implements AsmWriter support for printing the module summary index to
assembly with the format discussed in the RFC "LLVM Assembly format for
ThinLTO Summary".
Implements just enough of the parsing support to recognize and ignore
the summary entries. As agreed in the RFC thread, this will be the
behavior when assembling the IR. A follow on change will implement
parsing/assembling of the summary entries for use by tools that
currently build the summary index from bitcode.
Reviewers: dexonsmith, pcc
Subscribers: inglorion, eraman, steven_wu, dblaikie, llvm-commits
Differential Revision: https://reviews.llvm.org/D46699
llvm-svn: 333335
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Summary:
Since r325479 the DataLayout includes a program address space. However, it
is not possible to use `call %foo` if foo is a `i8(...) addrspace(200)` and
the DataLayout specifies address space 200 as the address space for functions.
With this change the IR parser will still accept variables in the program
address space as well as address space 0 for call and invoke functions.
Reviewers: pcc, arsenm, bjope, dylanmckay, theraven
Reviewed By: dylanmckay
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43645
llvm-svn: 326188
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
Summary:
This adds initial support for letting targets specify which address
spaces their functions should reside in by default.
If a function is created by a frontend, it will get the default address space specified in the DataLayout, unless the frontend explicitly uses a more general `llvm::Function` constructor. Function address spaces will become a part of the bitcode and textual IR forms, as we do not have access to a data layout whilst parsing LL.
It will be possible to write IR that explicitly has `addrspace(n)` on a function. In this case, the function will reside in the specified space, ignoring the default in the DL.
This is the first step towards placing functions into the correct
address space for Harvard architectures.
Full patchset
* Add program address space to data layout D37052
* Require address space to be specified when creating functions D37054
* [clang] Require address space to be specified when creating functions D37057
Reviewers: pcc, arsenm, kparzysz, hfinkel, theraven
Reviewed By: theraven
Subscribers: arichardson, simoncook, rengolin, wdng, uabelho, bjope, asb, llvm-commits
Differential Revision: https://reviews.llvm.org/D37052
llvm-svn: 325479
Rather than encode the absence of a checksum with a Kind variant, instead put
both the kind and value in a struct and wrap it in an Optional.
Differential Revision: http://reviews.llvm.org/D43043
llvm-svn: 324928
This patch is the LLVM part of fixing the issues, described in
https://bugs.llvm.org/show_bug.cgi?id=36168
* The representation of enumerator values in the debug info metadata now
contains a boolean flag isUnsigned, which determines how the bits of
the value are interpreted.
* The DW_TAG_enumeration type DIE now always (for DWARF version >= 3)
includes a DW_AT_type attribute, which refers to the underlying
integer type, as suggested in DWARFv4 (5.7 Enumeration Type Entries).
* The debug info metadata for enumeration type contains (in flags)
indication whether this is a C++11 "fixed enum".
* For C++11 enumeration with a fixed underlying type, the DIE also
includes the DW_AT_enum_class attribute (for DWARF version >= 4).
* Encoding of enumerator constants uses DW_FORM_sdata for signed values
and DW_FORM_udata for unsigned values, as suggested by DWARFv4 (7.5.4
Attribute Encodings).
The changes should be backwards compatible:
* the isUnsigned attribute is optional and defaults to false.
* if the underlying type for the enumeration is not available, the
enumerator values are considered signed.
* the FixedEnum flag defaults to clear.
* the bitcode format for DIEnumerator stores the unsigned flag bit #1 of
the first record element, so the format does not change and the zero
previously stored there is consistent with the false default for
IsUnsigned.
Differential Revision: https://reviews.llvm.org/D42734
llvm-svn: 324489
n Rust, an enum that carries data in the variants is, essentially, a
discriminated union. Furthermore, the Rust compiler will perform
space optimizations on such enums in some situations. Previously,
DWARF for these constructs was emitted using a hack (a magic field
name); but this approach stopped working when more space optimizations
were added in https://github.com/rust-lang/rust/pull/45225.
This patch changes LLVM to allow discriminated unions to be
represented in DWARF. It adds createDiscriminatedUnionType and
createDiscriminatedMemberType to DIBuilder and then arranges for this
to be emitted using DWARF's DW_TAG_variant_part and DW_TAG_variant.
Note that DWARF requires that a discriminated union be represented as
a structure with a variant part. However, as Rust only needs to emit
pure discriminated unions, this is what I chose to expose on
DIBuilder.
Patch by Tom Tromey!
Differential Revision: https://reviews.llvm.org/D42082
llvm-svn: 324426
Sometimes users do not specify data layout in LLVM assembly and let llc set the
data layout by target triple after loading the LLVM assembly.
Currently the parser checks alloca address space no matter whether the LLVM
assembly contains data layout definition, which causes false alarm since the
default data layout does not contain the correct alloca address space.
The parser also calls verifier to check debug info and updating invalid debug
info. Currently there is no way to let the verifier to check debug info only.
If the verifier finds non-debug-info issues the parser will fail.
For llc, the fix is to remove the check of alloca addr space in the parser and
disable updating debug info, and defer the updating of debug info and
verification to be after setting data layout of the IR by target.
For other llvm tools, since they do not override data layout by target but
instead can override data layout by a command line option, an argument for
overriding data layout is added to the parser. In cases where data layout
overriding is necessary for the parser, the data layout can be provided by
command line.
Differential Revision: https://reviews.llvm.org/D41832
llvm-svn: 323826
Summary:
This patch extends the DISubrange 'count' field to take either a
(signed) constant integer value or a reference to a DILocalVariable
or DIGlobalVariable.
This is patch [1/3] in a series to extend LLVM's DISubrange Metadata
node to support debugging of C99 variable length arrays and vectors with
runtime length like the Scalable Vector Extension for AArch64. It is
also a first step towards representing more complex cases like arrays
in Fortran.
Reviewers: echristo, pcc, aprantl, dexonsmith, clayborg, kristof.beyls, dblaikie
Reviewed By: aprantl
Subscribers: rnk, probinson, fhahn, aemerson, rengolin, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D41695
llvm-svn: 323313
It was never fully disallowed. We were rejecting it in the asm parser,
but not in the verifier.
Currently TargetMachine::shouldAssumeDSOLocal returns true for hidden
ifuncs. I considered changing it and moving the check from the asm
parser to the verifier.
The reason for deciding to allow it instead is that all linkers handle
a direct reference just fine. They use the plt address as the address
of the function. In fact doing that means that clang doesn't have the
same bug as gcc: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83782.
This patch then removes the check from the asm parser and updates the
bitcode reader and writer.
llvm-svn: 322378
Follow-up of r316824. This patch supports the vector type for both current and
previous index when factoring out the current one into the previous one.
Differential Revision: https://reviews.llvm.org/D39556
llvm-svn: 319683
As discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-November/107104.html
and again more recently:
http://lists.llvm.org/pipermail/llvm-dev/2017-October/118118.html
...this is a step in cleaning up our fast-math-flags implementation in IR to better match
the capabilities of both clang's user-visible flags and the backend's flags for SDNode.
As proposed in the above threads, we're replacing the 'UnsafeAlgebra' bit (which had the
'umbrella' meaning that all flags are set) with a new bit that only applies to algebraic
reassociation - 'AllowReassoc'.
We're also adding a bit to allow approximations for library functions called 'ApproxFunc'
(this was initially proposed as 'libm' or similar).
...and we're out of bits. 7 bits ought to be enough for anyone, right? :) FWIW, I did
look at getting this out of SubclassOptionalData via SubclassData (spacious 16-bits),
but that's apparently already used for other purposes. Also, I don't think we can just
add a field to FPMathOperator because Operator is not intended to be instantiated.
We'll defer movement of FMF to another day.
We keep the 'fast' keyword. I thought about removing that, but seeing IR like this:
%f.fast = fadd reassoc nnan ninf nsz arcp contract afn float %op1, %op2
...made me think we want to keep the shortcut synonym.
Finally, this change is binary incompatible with existing IR as seen in the
compatibility tests. This statement:
"Newer releases can ignore features from older releases, but they cannot miscompile
them. For example, if nsw is ever replaced with something else, dropping it would be
a valid way to upgrade the IR."
( http://llvm.org/docs/DeveloperPolicy.html#ir-backwards-compatibility )
...provides the flexibility we want to make this change without requiring a new IR
version. Ie, we're not loosening the FP strictness of existing IR. At worst, we will
fail to optimize some previously 'fast' code because it's no longer recognized as
'fast'. This should get fixed as we audit/squash all of the uses of 'isFast()'.
Note: an inter-dependent clang commit to use the new API name should closely follow
commit.
Differential Revision: https://reviews.llvm.org/D39304
llvm-svn: 317488
Currently we do not represent runtime preemption in the IR, which has several
drawbacks:
1) The semantics of GlobalValues differ depending on the object file format
you are targeting (as well as the relocation-model and -fPIE value).
2) We have no way of disabling inlining of run time interposable functions,
since in the IR we only know if a function is link-time interposable.
Because of this llvm cannot support elf-interposition semantics.
3) In LTO builds of executables we will have extra knowledge that a symbol
resolved to a local definition and can't be preemptable, but have no way to
propagate that knowledge through the compiler.
This patch adds preemptability specifiers to the IR with the following meaning:
dso_local --> means the compiler may assume the symbol will resolve to a
definition within the current linkage unit and the symbol may be accessed
directly even if the definition is not within this compilation unit.
dso_preemptable --> means that the compiler must assume the GlobalValue may be
replaced with a definition from outside the current linkage unit at runtime.
To ease transitioning dso_preemptable is treated as a 'default' in that
low-level codegen will still do the same checks it did previously to see if a
symbol should be accessed indirectly. Eventually when IR producers emit the
specifiers on all Globalvalues we can change dso_preemptable to mean 'always
access indirectly', and remove the current logic.
Differential Revision: https://reviews.llvm.org/D20217
llvm-svn: 316668
Currently llvm assembler emits parsing error for valid IR assembly
alloca i32, i32 9, addrspace(5)
when alloca addr space is 5.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D38713
llvm-svn: 315791
Summary:
Most DIExpressions are empty or very simple. When they are complex, they
tend to be unique, so checking them inline is reasonable.
This also avoids the need for CodeGen passes to append to the
llvm.dbg.mir named md node.
See also PR22780, for making DIExpression not be an MDNode.
Reviewers: aprantl, dexonsmith, dblaikie
Subscribers: qcolombet, javed.absar, eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37075
llvm-svn: 311594
Use `llvm-objdump -dwarf=frames` to dump the .eh_frame to validate the
output textually rather than compare the binary output. This makes it
easier to see what is being checked. NFC.
llvm-svn: 309524
If the return column is different, we cannot coalesce the CIE across the
FDEs. Add that to the key calculation. This ensures that we emit a
separate CIE.
llvm-svn: 309492
This adds support for the CFI pseudo-op return_column. This specifies
the frame table column which contains the return address.
Addresses PR33953!
llvm-svn: 309360
