When RAFast sees liveins in on a basic block, it uses that information
to initialize the availability of the registers. The called
method uses an instruction as one of its argument and in the liveins
case, RAFast was dereferencing MBB::begin which can be MBB::end for
empty basic block.
Change the API of definePhysReg to use MachineBasicBlock::iterator
instead of MachineInstr so that we don't dereference an
invalid iterator while making the call.
rdar://problem/36952401
llvm-svn: 323710
This reverts commit r322917 due to multiple performance regressions in spec2006
and spec2017. XFAILed llvm/test/CodeGen/AArch64/big-callframe.ll which initially
motivated this change.
llvm-svn: 323683
The Large System Extension added an atomic compare-and-swap instruction
that operates on a pair of 64-bit registers, which we can use to
implement a 128-bit cmpxchg.
Because i128 is not a legal type for AArch64 we have to do all of the
instruction selection in C++, and the instruction requires even/odd
register pairs, so we have to wrap it in REG_SEQUENCE and EXTRACT_SUBREG
nodes. This is very similar to what we do for 64-bit cmpxchg in the ARM
backend.
Differential revision: https://reviews.llvm.org/D42104
llvm-svn: 323634
We weren't converting the immediate ConstantFP during legalization, which caused
the wrong bit patterns to be emitted for half type FP constants.
Fixes PR36106.
llvm-svn: 323582
Add support for printing / parsing the addrspace of a MachineMemOperand.
Fixes PR35970.
Differential Revision: https://reviews.llvm.org/D42502
llvm-svn: 323521
The tablegen imported patterns for sext(load(a)) don't check for single uses
of the load or delete the original after matching. As a result two loads are
left in the generated code. This particular issue will be fixed by adding
support for a G_SEXTLOAD opcode in future.
There are however other potential issues around this that wouldn't be fixed by
a G_SEXTLOAD, so until we have a proper solution we don't try to handle volatile
loads at all in the AArch64 selector.
Fixes/works around PR36018.
llvm-svn: 323371
Apparently checking the pass structure isn't enough to ensure that we don't fall
back to FastISel, as it's set up as part of the SelectionDAGISel.
llvm-svn: 323369
Summary:
Loads/stores of some NEON vector types are promoted to other vector
types with different lane sizes but same vector size. This is not a
problem in little-endian but, when in big-endian, it requires
additional byte reversals required to preserve the lane ordering
while keeping the right endianness of the data inside each lane.
For example:
%1 = load <4 x half>, <4 x half>* %p
results in the following assembly:
ld1 { v0.2s }, [x1]
rev32 v0.4h, v0.4h
This patch changes the promotion of these loads/stores so that the
actual vector load/store (LD1/ST1) takes care of the endianness
correctly and there is no need for further byte reversals. The
previous code now results in the following assembly:
ld1 { v0.4h }, [x1]
Reviewers: olista01, SjoerdMeijer, efriedma
Reviewed By: efriedma
Subscribers: aemerson, rengolin, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D42235
llvm-svn: 323325
https://reviews.llvm.org/D42402
A lot of these copies are useless (copies b/w VRegs having the same
regclass) and should be cleaned up.
llvm-svn: 323291
Remove FeatureSlowMisaligned128Store from cyclone flags.
This flag causes splitting of 16 byte wide stores into 2 stored of 8
bytes. This was useful on older apple CPUs which were slow for 16byte
stores that were not aligned on 16byte. As the compiler often cannot
predict the actual alignment, the splitting was choosen.
This has been a topic for a lot of debate as the splitting also
decreases performance for some benchmarks. Measuring the effects on
newer apple chips (rdar://35525421) shows that it harms more cases than
it helps. So it is time to retire this workaround.
llvm-svn: 323289
Some nodes produce multiple values so when obtaining the type of an ISD::OR we
need to make sure we ask for the correct one. Hopefully that's all of them.
llvm-svn: 323205
Summary:
Since r322087, glibc's finite lib calls are generated when possible.
However, glibc is not supported on Android. Therefore this change
enables llvm to finely distinguish between linux and Android for
unsupported library calls. The change also include some regression
tests.
Reviewers: srhines, pirama
Reviewed By: srhines
Subscribers: kongyi, chh, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D42288
llvm-svn: 323187
Improves the code generation for v4f16 FCMP instructions when FullFP16 is not supported.
Generating FCTVL(s) rather than a longer series of FCVTs.
Differential Revision: https://reviews.llvm.org/D41772
llvm-svn: 323118
Re-commit of r322200: The testcase shouldn't hit machineverifiers
anymore with r322917 in place.
Large callframes (calls with several hundreds or thousands or
parameters) could lead to situations in which the emergency spillslot is
out of range to be addressed relative to the stack pointer.
This commit forces the use of a frame pointer in the presence of large
callframes.
This commit does several things:
- Compute max callframe size at the end of instruction selection.
- Add mirFileLoaded target callback. Use it to compute the max callframe size
after loading a .mir file when the size wasn't specified in the file.
- Let TargetFrameLowering::hasFP() return true if there exists a
callframe > 255 bytes.
- Always place the emergency spillslot close to FP if we have a frame
pointer.
- Note that `useFPForScavengingIndex()` would previously return false
when a base pointer was available leading to the emergency spillslot
getting allocated late (that's the whole effect of this callback).
Which made no sense to me so I took this case out: Even though the
emergency spillslot is technically not referenced by FP in this case
we still want it allocated early.
Differential Revision: https://reviews.llvm.org/D40876
llvm-svn: 322919
Do not create CALLSEQ_START/CALLSEQ_END when there is no callframe to
setup and the callframe size is 0.
- Fixes an invalid callframe nesting for byval arguments, which would
look like this before this patch (as in `big-byval.ll`):
...
ADJCALLSTACKDOWN 32768, 0, ... # Setup for extfunc
...
ADJCALLSTACKDOWN 0, 0, ... # setup for memcpy
...
BL &memcpy ...
ADJCALLSTACKUP 0, 0, ... # destroy for memcpy
...
BL &extfunc
ADJCALLSTACKUP 32768, 0, ... # destroy for extfunc
- Saves us two instructions in the common case of zero-sized stackframes.
- Remove an unnecessary scheduling barrier (hence the small unittest
changes).
Differential Revision: https://reviews.llvm.org/D42006
llvm-svn: 322917
r322086 removed the trailing information describing reg classes for each
register.
This patch adds printing reg classes next to every register when
individual operands/instructions/basic blocks are printed. In the case
of dumping MIR or printing a full function, by default don't print it.
Differential Revision: https://reviews.llvm.org/D42239
llvm-svn: 322867
Right now, it is not possible to run MachineCSE in the middle of the
GlobalISel pipeline. Being able to run generic optimizations between the
core passes of GlobalISel was one of the goals of the new ISel framework.
This is the first attempt to do it.
The problem is that MachineCSE pass assumes all register operands have a
register class, which, in GlobalISel context, won't be true until after the
InstructionSelect pass. The reason for this behaviour is that before
replacing one virtual register with another, MachineCSE pass (and most of
the other optimization machine passes) must check if the virtual registers'
constraints have a (sufficiently large) intersection, and constrain the
resulting register appropriately if such intersection exists.
GlobalISel extends the representation of such constraints from just a
register class to a triple (low-level type, register bank, register
class).
This commit adds MachineRegisterInfo::constrainRegAttrs method that extends
MachineRegisterInfo::constrainRegClass to such a triple.
The idea is that going forward we should use:
- RegisterBankInfo::constrainGenericRegister within GlobalISel's
InstructionSelect pass
- MachineRegisterInfo::constrainRegClass within SelectionDAG ISel
- MachineRegisterInfo::constrainRegAttrs everywhere else regardless
the target and instruction selector it uses.
Patch by Roman Tereshin. Thanks!
llvm-svn: 322805
Every known PE COFF target emits /EXPORT: linker flags into a .drective
section. The AsmPrinter should handle this.
While we're at it, use global_values() and emit each export flag with
its own .ascii directive. This should make the .s file output more
readable.
llvm-svn: 322788
The code wasn't zero-extending correctly, so the comparison could
spuriously fail.
Adds some AArch64 tests to cover this case.
Inspired by D41791.
Differential Revision: https://reviews.llvm.org/D41798
llvm-svn: 322767
Summary:
Loading a vector of 4 half-precision FP sometimes results in an LD1
of 2 single-precision FP + a reversal. This results in an incorrect
byte swap due to the conversion from little endian to big endian.
In order to generate the correct byte swap, it is easier to
generate the correct LD1 of 4 half-precision FP, thus avoiding the
subsequent reversal.
Reviewers: craig.topper, jmolloy, olista01
Reviewed By: olista01
Subscribers: efriedma, samparker, SjoerdMeijer, rogfer01, aemerson, rengolin, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D41863
llvm-svn: 322663
Summary:
This patch adds CustomRenderer which renders the matched
operands to the specified instruction.
Targets can enable the matching of SDNodeXForm by adding
a definition that inherits from GICustomOperandRenderer and
GISDNodeXFormEquiv as follows.
def gi_imm8 : GICustomOperandRenderer<"renderImm8”>,
GISDNodeXFormEquiv<imm8_xform>;
Custom renderer functions should be of the form:
void render(MachineInstrBuilder &MIB, const MachineInstr &I);
Reviewers: dsanders, ab, rovka
Reviewed By: dsanders
Subscribers: kristof.beyls, javed.absar, llvm-commits, mgrang, qcolombet
Differential Revision: https://reviews.llvm.org/D42012
llvm-svn: 322582
*Mostly* NFC. Still updating the test though just for completeness.
This moves the hasAddressTaken check to MachineOutliner.cpp and replaces it
with a per-basic block test rather than a per-function test. The old test was
too conservative and was preventing functions in C programs from being
outlined even though they were safe to outline.
This was mostly a problem in C sources.
llvm-svn: 322425
This was originally planned as the fix for:
https://bugs.llvm.org/show_bug.cgi?id=35834
...but simpler transforms handled that case, so I implemented a
lesser solution. It turns out we need to handle the case with 'not'
ops too because the real code example that we are trying to solve:
https://bugs.llvm.org/show_bug.cgi?id=35875
...has extra uses of the intermediate values, so we can't rely on
smaller canonicalizations to get us to the goal.
As with rL321672, I've tried to show every possibility in the
codegen tests because that's the simplest way to prove we're doing
the right thing in the wide variety of permutations of this pattern.
We can also show an InstCombine win because we added a fold for
this case in:
rL321998 / D41603
An Alive proof for one variant of the pattern to show that the
InstCombine and codegen results are correct:
https://rise4fun.com/Alive/vd1
Name: min3_nots
%nx = xor i8 %x, -1
%ny = xor i8 %y, -1
%nz = xor i8 %z, -1
%cmpxz = icmp slt i8 %nx, %nz
%minxz = select i1 %cmpxz, i8 %nx, i8 %nz
%cmpyz = icmp slt i8 %ny, %nz
%minyz = select i1 %cmpyz, i8 %ny, i8 %nz
%cmpyx = icmp slt i8 %y, %x
%r = select i1 %cmpyx, i8 %minxz, i8 %minyz
=>
%cmpxyz = icmp slt i8 %minxz, %ny
%r = select i1 %cmpxyz, i8 %minxz, i8 %ny
Name: min3_nots_alt
%nx = xor i8 %x, -1
%ny = xor i8 %y, -1
%nz = xor i8 %z, -1
%cmpxz = icmp slt i8 %nx, %nz
%minxz = select i1 %cmpxz, i8 %nx, i8 %nz
%cmpyz = icmp slt i8 %ny, %nz
%minyz = select i1 %cmpyz, i8 %ny, i8 %nz
%cmpyx = icmp slt i8 %y, %x
%r = select i1 %cmpyx, i8 %minxz, i8 %minyz
=>
%xz = icmp sgt i8 %x, %z
%maxxz = select i1 %xz, i8 %x, i8 %z
%xyz = icmp sgt i8 %maxxz, %y
%maxxyz = select i1 %xyz, i8 %maxxz, i8 %y
%r = xor i8 %maxxyz, -1
llvm-svn: 322283
Like rL321668 / rL321672, the planned optimizer change to
fix these will be in ValueTracking, but we can test the
changes cleanly here with AArch64 codegen.
llvm-svn: 322238
Revert for now as the testcase is hitting a pre-existing verifier error
that manifest as a failure when expensive checks are enabled (or
-verify-machineinstrs) is used.
This reverts commit r322200.
llvm-svn: 322231
ADRP instructions weren't being outlined because they're PC-relative and thus
fail the LR checks. This patch adds a special case for ADRPs to
getOutliningType to make sure that ADRPs can be outlined and updates the MIR
test.
llvm-svn: 322207
Large callframes (calls with several hundreds or thousands or
parameters) could lead to situations in which the emergency spillslot is
out of range to be addressed relative to the stack pointer.
This commit forces the use of a frame pointer in the presence of large
callframes.
This commit does several things:
- Compute max callframe size at the end of instruction selection.
- Add mirFileLoaded target callback. Use it to compute the max callframe size
after loading a .mir file when the size wasn't specified in the file.
- Let TargetFrameLowering::hasFP() return true if there exists a
callframe > 255 bytes.
- Always place the emergency spillslot close to FP if we have a frame
pointer.
- Note that `useFPForScavengingIndex()` would previously return false
when a base pointer was available leading to the emergency spillslot
getting allocated late (that's the whole effect of this callback).
Which made no sense to me so I took this case out: Even though the
emergency spillslot is technically not referenced by FP in this case
we still want it allocated early.
Differential Revision: https://reviews.llvm.org/D40876
llvm-svn: 322200
Planning to add support for named vregs. This puts is in a conundrum since
physregs are named as well. To rectify this we need to use a sigil other than
'%' for physregs in MIR. We've settled on using '$' for physregs but first we
must repurpose it from external symbols using it, which is what this commit is
all about. We think '&' will have familiar semantics for C/C++ users.
llvm-svn: 322146
Currently the MachineInstr::print function prints the
frame-setup/frame-destroy differently than it does in MIR.
Instead of:
%x21 = LDR %sp, -16; flags: FrameDestroy
print:
%x21 = frame-destroy LDR %sp, -16
llvm-svn: 322088
Since register classes and banks are already printed with the register
definition, don't print it at the end of every instruction anymore.
This follows MIR in this regard and is another step to the unification
of the two formats.
llvm-svn: 322086
We are printing / parsing the `frame-setup` MachineInstr flag but not
the `frame-destroy` one.
Differential Revision: https://reviews.llvm.org/D41509
llvm-svn: 322071
This commit does two things. Firstly, it adds a collection of flags which can
be passed along to the target to encode information about the MBB that an
instruction lives in to the outliner.
Second, it adds some of those flags to the AArch64 outliner in order to add
more stack instructions to the list of legal instructions that are handled
by the outliner. The two flags added check if
- There are calls in the MachineBasicBlock containing the instruction
- The link register is available in the entire block
If the link register is available and there are no calls, then a stack
instruction can always be outlined without fixups, regardless of what it is,
since in this case, the outliner will never modify the stack to create a
call or outlined frame.
The motivation for doing this was checking which instructions are most often
missed by the outliner. Instructions like, say
%sp<def> = ADDXri %sp, 32, 0; flags: FrameDestroy
are very common, but cannot be outlined in the case that the outliner might
modify the stack. This commit allows us to outline instructions like this.
llvm-svn: 322048
Instead of using, for example, `dup v0.4s, wzr`, which transfers between
register files, use the more efficient `movi v0.4s, #0` instead.
Differential revision: https://reviews.llvm.org/D41515
llvm-svn: 321824
Previously the code for handling G_SMULO didn't properly check for the signed
multiply overflow, instead treating it the same as the unsigned G_UMULO.
Fixes PR35800.
llvm-svn: 321690
A call may have an intrinsic name but not have a valid intrinsic ID,
for example with llvm.invariant.group.barrier. If so, treat it as a
normal call like FastISel does.
llvm-svn: 321662
