This has proven a healthy exercise, as many cases of incorrect instruction
flags were corrected in the process. As part of this, IntrWriteMem was added
to several SystemZ instrinsics.
Furthermore, a bug was exposed in TwoAddress with this change (as incorrect
hasSideEffects flags were removed and instructions could now be sunk), and
the test case for that bugfix (r319646) is included here as
test/CodeGen/SystemZ/twoaddr-sink.ll.
One temporary test regression (one extra copy) which will hopefully go away
in upcoming patches for similar cases:
test/CodeGen/SystemZ/vec-trunc-to-i1.ll
Review: Ulrich Weigand.
https://reviews.llvm.org/D40437
llvm-svn: 319756
MachineRegisterInfo used to allow just one regalloc hint per virtual
register. This patch extends this to a vector of regalloc hints, which is
filled in by common code with sorted copy hints. Such hints will make for
more ID copies that can be removed.
NB! This improvement is currently (and hopefully temporarily) *disabled* by
default, except for SystemZ. The only reason for this is the big impact this
has on tests, which has unfortunately proven unmanageable. It was a long
while since all the tests were updated and just waiting for review (which
didn't happen), but now targets have to enable this themselves
instead. Several targets could get a head-start by downloading the tests
updates from the Phabricator review. Thanks to those who helped, and sorry
you now have to do this step yourselves.
This should be an improvement generally for any target!
The target may still create its own hint, in which case this has highest
priority and is stored first in the vector. If it has target-type, it will
not be recomputed, as per the previous behaviour.
The temporary hook enableMultipleCopyHints() will be removed as soon as all
targets return true.
Review: Quentin Colombet, Ulrich Weigand.
https://reviews.llvm.org/D38128
llvm-svn: 319754
This recommits r319533 which was broken llvm-config --system-libs
output. The reason was that I used find_libraries for searching for the
z library. This returns absolute paths, and when these paths made it
into llvm-config, it made it produce nonsensical flags. To fix this, I
hand-roll a search for the library in the same way that we search for
the terminfo library a couple of lines below.
This is a bit less flexible than the find_library option, as it does not
allow the user to specify the path to the library at configure time
(which is important on windows, as zlib is unlikely to be found in any
of the standard places cmake searches), but I was able to guide the
build to find it with appropriate values of LIB and INCLUDE environment
variables.
Reviewers: compnerd, rnk, beanz, rafael
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D40779
llvm-svn: 319751
This is for PR35460.
Currently when LLD adds files to TarWriter it may pass the same file
multiple times. For example it happens for clang reproduce file which specifies
archive (.a) files more than once in command line.
Patch makes TarWriter to ignore files with the same path, so it will
add only the first one to archive.
Differential revision: https://reviews.llvm.org/D40606
llvm-svn: 319750
When trying to determine the correct Mask register class corresponding
to a GPR register class, not all register classes were handled.
This caused an assertion to be raised on some scenarios.
Differential Revision:
https://reviews.llvm.org/D40290
llvm-svn: 319745
The CONCAT_VECTORS operand get its type from getSetCCResultType, but if the mask type and the setcc have different scalar sizes this creates an illegal CONCAT_VECTORS operation. The concat type should be 2x the mask type, and then an extend should be added if needed.
llvm-svn: 319744
Previously we used a wider element type and truncated. But its more efficient to keep the element type and drop unused elements.
If BWI isn't supported and we have a i16 or i8 type, we'll extend it to be i32 and still use a truncate.
llvm-svn: 319740
This calls handleMove with a DBG_VALUE instruction,
which isn't tracked by LiveIntervals. I'm not sure
this is the correct place to fix this. The generic
scheduler seems to have more deliberate region
selection that skips dbg_value.
The test is also really hard to reduce. I haven't been able
to figure out what exactly causes this particular case to
try moving the dbg_value.
llvm-svn: 319732
Previously we used a wider element type and truncated. But its more efficient to keep the element type and drop unused elements.
If BWI isn't supported and we have a i16 or i8 type, we'll extend it to be i32 and still use a truncate.
llvm-svn: 319728
The getConstant function can take care of creating the APInt internally.
getZeroVector will take care of using the correct type for the build vector to avoid re-lowering.
The test change here is because execution domain constraints apparently pass through undef inputs of a zeroing xor. So the different ordering of register allocation here caused the dependency to change.
llvm-svn: 319725
Move the AVX512 code out of LowerAVXExtend. LowerAVXExtend has two callers but one of them pre-checks for AVX-512 so the code is only live from the other caller. So move the AVX-512 checks up to that caller for symmetry.
Move all of the i1 input type code in Lower_AVX512ZeroExend together.
llvm-svn: 319724
The "x${...}" form was a workaround for CMake versions prior to 3.1,
where the if command would interpret arguments as variables even when
quoted [1]. We can drop the workaround now that our minimum CMake
version is 3.4.
[1] https://cmake.org/cmake/help/v3.1/policy/CMP0054.html
Differential Revision: https://reviews.llvm.org/D40744
llvm-svn: 319723
Consistently use the same parameter names as the names of the affected
fields. This avoids some unintuitive abbreviations like `isSS`.
llvm-svn: 319722
While we cannot skip the whole TwoAddressInstructionPass even for -O0
there are some parts of the pass that are currently skipped at -O0 but
not for optnone. Changing this as there is no reason to have those two
hit different code paths here.
llvm-svn: 319721
Using comma can break in cases when we're passing flags that already
use comma as a separator.
Fixes PR35504.
Differential Revision: https://reviews.llvm.org/D40761
llvm-svn: 319719
It's not implemented.
Passing +fp64-fp16-denormal feature enables fp64 even on asics that don't support it
v2: fix hasFP64 query
Differential Revision: https://reviews.llvm.org/D39931
llvm-svn: 319709
Move the entire optimization to one place. Before it was possible
to adjust dmask without changing the register class of the output
instruction, since they were done in separate places. Fix all
lane sizes and move all of the optimization into the DAG folding.
llvm-svn: 319705
Summary:
While implementing atomicrmw in https://reviews.llvm.org/D40092 I found that
inheritance is unusable for all the Generic Opcodes in GlobalISel. This is
because the whole header is included inside a 'let mayLoad = 0, mayStore = 0 ... in'
block. In TableGen, the order of precedence for field assignments is:
1. Values from classes the record inherits from.
2. Values from 'let Name=Value in { ... }'
3. Values from 'let Name=Value;'
As such the 'let mayLoad = 0, mayStore = 0, ... in' surrounding the
'include "GenericOpcodes.td"' was overriding any values provided via inheritance.
We hadn't noticed this before because we were only using 'let Name=Value;' to
specialize opcodes.
Fix this by moving the default values to the lowest precedence. This is
accomplished by moving the values to a common base class
(StandardPseudoInstruction for most TargetOpcodes, and GenericOpcode for
GlobalISel specific TargetOpcodes)
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D40096
llvm-svn: 319701
Set the .debug_line version to match the requested DWARF version,
except with a maximum of v4 because we don't support v5 yet.
Previously Chromium had issues with this patch; see PR31407. Chromium
tool issues have been addressed, so hopefully this will go through
this time.
Patch by Katya Romanova!
Differential Revision: https://reviews.llvm.org/D38002
llvm-svn: 319699
MatchRotate assumes the types of the types of LHS and RHS are equal,
which is always the case then they come from an OR node, but here
we're getting them from two different TRUNC nodes, so we have to check
the types.
llvm-svn: 319695
If the truncation has been pushed past the or-node, look through it and
truncate afterwards.
Differential revision: https://reviews.llvm.org/D40792
llvm-svn: 319692
This patch splits atomics out of the generic G_LOAD/G_STORE and into their own
G_ATOMIC_LOAD/G_ATOMIC_STORE. This is a pragmatic decision rather than a
necessary one. Atomic load/store has little in implementation in common with
non-atomic load/store. They tend to be handled very differently throughout the
backend. It also has the nice side-effect of slightly improving the common-case
performance at ISel since there's no longer a need for an atomicity check in the
matcher table.
All targets have been updated to remove the atomic load/store check from the
G_LOAD/G_STORE path. AArch64 has also been updated to mark
G_ATOMIC_LOAD/G_ATOMIC_STORE legal.
There is one issue with this patch though which also affects the extending loads
and truncating stores. The rules only match when an appropriate G_ANYEXT is
present in the MIR. For example,
(G_ATOMIC_STORE (G_TRUNC:s16 (G_ANYEXT:s32 (G_ATOMIC_LOAD:s16 X))))
will match but:
(G_ATOMIC_STORE (G_ATOMIC_LOAD:s16 X))
will not. This shouldn't be a problem at the moment, but as we get better at
eliminating extends/truncates we'll likely start failing to match in some
cases. The current plan is to fix this in a patch that changes the
representation of extending-load/truncating-store to allow the MMO to describe
a different type to the operation.
llvm-svn: 319691
Summary:
Move splitIndirectCriticalEdges() from CodeGenPrepare to BasicBlockUtils.h so
that it can be called from other places.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40750
llvm-svn: 319689
Follow-up of r316824. This patch supports the vector type for both current and
previous index when factoring out the current one into the previous one.
Differential Revision: https://reviews.llvm.org/D39556
llvm-svn: 319683
Summary:
I don't think rL309080 is the right fix for PR33494 -- caching ExitLimit only
hides the problem[0]. The real issue is that because of how we forget SCEV
expressions ScalarEvolution::getBackedgeTakenInfo, in the test case for PR33494
computing the backedge for any loop invalidates the trip count for every other
loop. This effectively makes the SCEV cache useless.
I've instead made the SCEV expression invalidation in
ScalarEvolution::getBackedgeTakenInfo less aggressive to fix this issue.
[0]: One way to think about this is that rL309080 essentially augmented the
backedge-taken-count cache with another equivalent exit-limit cache. The bug
went away because we were explicitly not clearing the exit-limit cache in
getBackedgeTakenInfo. But instead of doing all of that, we can just avoid
clearing the backedge-taken-count cache.
Reviewers: mkazantsev, mzolotukhin
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D39361
llvm-svn: 319678
(This reapplies r314253. r314253 was reverted on r314482 because of a
correctness regression on P100, but that regression was identified to be
something else.)
Summary:
Don't bail out on constant divisors for divisions that can be narrowed without
introducing control flow . This gives us a 32 bit multiply instead of an
emulated 64 bit multiply in the generated PTX assembly.
Reviewers: jlebar
Subscribers: jholewinski, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D38265
llvm-svn: 319677
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
Summary:
The compiler fails with the following error message:
fatal error: error in backend: ran out of registers during
register allocation
Tail call optimization for Armv8-M.base fails to meet all the required
constraints when handling calls to function pointers where the
arguments take up r0-r3. This is because the pointer to the
function to be called can only be stored in r0-r3, but these are
all occupied by arguments. This patch makes sure that tail call
optimization does not try to handle this type of calls.
Reviewers: chill, MatzeB, olista01, rengolin, efriedma
Reviewed By: olista01, efriedma
Subscribers: efriedma, aemerson, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40706
llvm-svn: 319664
This reverts commit r319533 as it broke llvm-config --system-libs output
and everything that depends on it (which is mostly out of tree or
downstream folks, but includes a couple of llvm buildbots as well).
I think I have a fix for this in D40779, but I want someone to look
review it first. In the mean time, I am reverting this change, as it
seems to break a lot of people.
llvm-svn: 319663
Summary:
Currently, we only support predication for forward loops with step
of 1. This patch enables loop predication for reverse or
countdownLoops, which satisfy the following conditions:
1. The step of the IV is -1.
2. The loop has a singe latch as B(X) = X <pred>
latchLimit with pred as s> or u>
3. The IV of the guard is the decrement
IV of the latch condition (Guard is: G(X) = X-1 u< guardLimit).
This patch was downstream for a while and is the last series of patches
that's from our LP implementation downstream.
Reviewers: apilipenko, mkazantsev, sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40353
llvm-svn: 319659
PTX requires that identifiers consist only of [a-zA-Z0-9_$]. The
existing pass already ensured this for globals and this patch adds
the cleanup for functions with local linkage.
However, there was a different problem in the case of collisions
of the adjusted name: The ValueSymbolTable then automatically
appended ".N" with increasing Ns to get a unique name while helping
the ABI demangling. Special case this behavior to omit the dots and
append N directly. This will always give us legal names according
to the PTX requirements.
Differential Revision: https://reviews.llvm.org/D40573
llvm-svn: 319657
The variable named `minor` was actually pointing to the patch part of
the version. While I was changing this I also made the check for Apple
clang more robust by checking both patch and minor rather than just
minor.
llvm-svn: 319656
