Summary:
This is the InlineAdvisor used in 'development' mode. It enables two
scenarios:
- loading models via a command-line parameter, thus allowing for rapid
training iteration, where models can be used for the next exploration
phase without requiring recompiling the compiler. This trades off some
compilation speed for the added flexibility.
- collecting training logs, in the form of tensorflow.SequenceExample
protobufs. We generate these as textual protobufs, which simplifies
generation and testing. The protobufs may then be readily consumed by a
tensorflow-based training algorithm.
To speed up training, training logs may also be collected from the
'default' training policy. In that case, this InlineAdvisor does not
use a model.
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-April/140763.html
Reviewers: jdoerfert, davidxl
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83733
These tests involve a JIT, and like other tests should have the
REQUIRE: default_triple present.
This allow to run `ninja check` without the host target configured
in.
This patch upgrades DISubrange to support fortran requirements.
Summary:
Below are the updates/addition of fields.
lowerBound - Now accepts signed integer or DIVariable or DIExpression,
earlier it accepted only signed integer.
upperBound - This field is now added and accepts signed interger or
DIVariable or DIExpression.
stride - This field is now added and accepts signed interger or
DIVariable or DIExpression.
This is required to describe bounds of array which are known at runtime.
Testing:
unit test cases added (hand-written)
check clang
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D80197
This is equivalent in terms of LLVM IR semantics, but we want to
transition away from using MaybeAlign to represent the alignment of
these instructions.
Differential Revision: https://reviews.llvm.org/D77984
And add llvm-go back to the test dependencies.
No longer necessary now that llvm-go has been brought back.
This reverts commit e8f8873da5eaad187f82dad78ebdb3ab3df22b36.
Basically change the layout to please `go build` and remove references to
`llvm-go`.
Update llvm/test/Bindings/Go/ to use the system go compiler
Differential Revision: https://reviews.llvm.org/D74540
Summary: The lit feature object-emission was added because Hexagon did not support the integrated assembler, so some tests needed to be turned off with a Hexagon target. Hexagon now supports the integrated assembler, so this feature can be removed.
Reviewers: bcain, kparzysz, jverma, whitequark, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: mehdi_amini, hiraditya, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73568
[this re-applies c0176916a4824812d25a5a22c4ff7c95857b0cd6
with the correct commit message and phabricator link]
This addresses point 1 of PR44213.
https://bugs.llvm.org/show_bug.cgi?id=44213
The DW_AT_LLVM_sysroot attribute is used for Clang module debug info,
to allow LLDB to import a Clang module from source. Currently it is
part of each DW_TAG_module, however, it is the same for all modules in
a compile unit. It is more efficient and less ambiguous to store it
once in the DW_TAG_compile_unit.
This should have no effect on DWARF consumers other than LLDB.
Differential Revision: https://reviews.llvm.org/D71732
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
Since OCaml 4.02 (released in 2014), strings and bytes are different
types, but up until OCaml 4.06, the compiler defaulted to a
compatibility mode "unsafe-string". OCaml 4.06 flips the default to
"safe-string", breaking the test.
This change should be compatible with OCaml 4.02+, but is only truly
necessary for OCaml 4.06+.
For more information, see:
https://caml.inria.fr/pub/docs/manual-ocaml/libref/String.htmlhttps://ocaml.org/releases/4.02.html
Summary:
This patch redefines freeze instruction from being UnaryOperator to a subclass of UnaryInstruction.
ConstantExpr freeze is removed, as discussed in the previous review.
FreezeOperator is not added because there's no ConstantExpr freeze.
`freeze i8* null` test is added to `test/Bindings/llvm-c/freeze.ll` as well, because the null pointer-related bug in `tools/llvm-c/echo.cpp` is now fixed.
InstVisitor has visitFreeze now because freeze is not unaryop anymore.
Reviewers: whitequark, deadalnix, craig.topper, jdoerfert, lebedev.ri
Reviewed By: craig.topper, lebedev.ri
Subscribers: regehr, nlopes, mehdi_amini, hiraditya, steven_wu, dexonsmith, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69932
Summary:
This patch resolves llvm-c-test's following error
```
LLVM ERROR: LLVMGetValueKind returned incorrect type
```
which arises when the input bitcode contains a null pointer.
Reviewers: jdoerfert, CodaFi, deadalnix
Reviewed By: jdoerfert
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68928
atomicrmw and cmpxchg have a volatile flag, so allow them to be get and set with LLVM{Get,Set}Volatile. atomicrmw and fence have orderings, so allow them to be get and set with LLVM{Get,Set}Ordering. Add missing LLVMAtomicRMWBinOpFAdd and LLVMAtomicRMWBinOpFSub enum constants. AtomicCmpXchg also has a weak flag, add a getter/setter for that too. Add a getter/setter for the binary-op of an atomicrmw.
atomicrmw and cmpxchg have a volatile flag, so allow it to be set/get with LLVMGetVolatile and LLVMSetVolatile. Add missing LLVMAtomicRMWBinOpFAdd and LLVMAtomicRMWBinOpFSub enum constants. AtomicCmpXchg also has a weak flag, add a getter/setter for that too. Add a getter/setter for the binary-op of an atomicrmw.
Add LLVMIsA## for CatchSwitchInst, CallBrInst and FenceInst, as well as AtomicCmpXchgInst and AtomicRMWInst.
Update llvm-c-test to include atomicrmw and fence, and to copy volatile for the four applicable instructions.
Differential Revision: https://reviews.llvm.org/D67132
llvm-svn: 372938
Summary: This exposes `CallInst`'s tail call kind via new `LLVMGetTailCallKind` and `LLVMSetTailCallKind` functions. The motivation for this is to be able to see `musttail` for languages that require mandatory tail calls for correctness. Today only the weaker `LLVMSetTail` is exposed and there is no way to set `GuaranteedTailCallOpt` via the C API.
Reviewers: CodaFi, jyknight, deadalnix, rnk
Reviewed By: CodaFi
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66061
llvm-svn: 368945
For consistency with normal instructions and clarity when reading IR,
it's best to print the %0, %1, ... names of function arguments in
definitions.
Also modifies the parser to accept IR in that form for obvious reasons.
llvm-svn: 367755
Summary:
In D62801, new function attribute `willreturn` was introduced. In short, a function with `willreturn` is guaranteed to come back to the call site(more precise definition is in LangRef).
In this patch, willreturn is annotated for LLVM intrinsics.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: jvesely, nhaehnle, sstefan1, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64904
llvm-svn: 367184
We are about to add enum attributes with AttrKind numbers >= 63. This
means we cannot use AttrKind #63 to test for an invalid attribute number
in the RAW format anymore. This patch changes the number of an invalid
attribute to #255. There is no change to the character of the tests.
Differential Revision: https://reviews.llvm.org/D64531
llvm-svn: 365722
Summary:
Adds the standard gauntlet of accessors for global indirect functions and updates the echo test.
Now it would be nice to have a target abstraction so one could know if they have access to a suitable ELF linker and runtime.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56177
llvm-svn: 353193
Packing the flags into one bitcode word will save effort in
adding new flags in the future.
Differential Revision: https://reviews.llvm.org/D54755
llvm-svn: 347806
Summary:
Improve the intrinsic bindings with operations for
- Retrieving and automatically inserting the declaration of an intrinsic by ID
- Retrieving the name of a non-overloaded intrinsic by ID
- Retrieving the name of an overloaded intrinsic by ID and overloaded parameter types
Improve the echo test to copy non-overloaded intrinsics by ID.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53626
llvm-svn: 346195
Summary: Adds missing debug information accessors to GlobalObject. This puts the finishing touches on cloning debug info in the echo tests.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: aprantl, JDevlieghere, llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D51522
llvm-svn: 343330
Summary: Add a new type for named metadata nodes. Use this to implement iterators and accessors for NamedMDNodes and extend the echo test to use them to copy module-level debug information.
Reviewers: whitequark, deadalnix, aprantl, dexonsmith
Reviewed By: whitequark
Subscribers: Wallbraker, JDevlieghere, llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D47179
llvm-svn: 341085
Summary: It was fully replaced back in 2014, and the implementation was removed 11 months ago by r306797.
Reviewers: hfinkel, chandlerc, whitequark, deadalnix
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47436
llvm-svn: 333378
Summary: Add LLVMDIBuilderCreateObjCIVar, LLVMDIBuilderCreateObjCProperty, and LLVMDIBuilderCreateInheritance to allow declaring metadata for Objective-C class hierarchies and their associated properties and instance variables.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: harlanhaskins, llvm-commits
Differential Revision: https://reviews.llvm.org/D47123
llvm-svn: 332850
Summary: Add wrappers for a module's alias iterators and a getter and setter for the aliasee value.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46808
llvm-svn: 332826
Summary:
The first foray into merging debug info into the echo tests.
- Add bindings to Module::getModuleFlagsMetadata() in the form of LLVMCopyModuleFlagsMetadata
- Add the opaque type LLVMModuleFlagEntry to represent Module::ModuleFlagEntry
- Add accessors for LLVMModuleFlagEntry's behavior, key, and metadata node.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: aprantl, JDevlieghere, llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46792
llvm-svn: 332219
Summary: Move and correct LLVMDIBuilderCreateTypedef. This is the last API in DIBuilderBindings.h, so it is being removed and the C API will now be re-exported from IRBindings.h.
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46725
llvm-svn: 332041
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Summary: Add bindings to create import declarations for modules, functions, types, and other entities. This wraps the conveniences available in the existing DIBuilder API, but these seem C++-specific.
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46167
llvm-svn: 331123
Summary: Wrap LLVMDIBuilderCreateAutoVariable, LLVMDIBuilderCreateParameterVariable, LLVMDIBuilderCreateExpression, and move and correct LLVMDIBuilderInsertDeclareBefore and LLVMDIBuilderInsertDeclareAtEnd from the Go bindings to the C bindings.
Reviewers: harlanhaskins, whitequark, deadalnix
Reviewed By: harlanhaskins, whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45928
llvm-svn: 330555
Summary:
- Add a missing getter for module-level inline assembly
- Add a missing append function for module-level inline assembly
- Deprecate LLVMSetModuleInlineAsm and replace it with LLVMSetModuleInlineAsm2 which takes an explicit length parameter
- Deprecate LLVMConstInlineAsm and replace it with LLVMGetInlineAsm, a function that allows passing a dialect and is not mis-classified as a constant operation
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45346
llvm-svn: 329369
