these patches are tested a lot by test-suite but
make check tests are forthcoming once the next
few patches that complete this are committed.
with the next few patches the pass rate for mips16 is
near 100%
llvm-svn: 170656
physical register $r1 to $r0.
GNU disassembler recognizes an "or" instruction as a "move", and this change
makes the disassembled code easier to read.
Original patch by Reed Kotler.
llvm-svn: 170655
((x & 0xff00) >> 8) << 2
to
(x >> 6) & 0x3fc
This is general goodness since it folds a left shift into the mask. However,
the trailing zeros in the mask prevents the ARM backend from using the bit
extraction instructions. And worse since the mask materialization may require
an addition instruction. This comes up fairly frequently when the result of
the bit twiddling is used as memory address. e.g.
= ptr[(x & 0xFF0000) >> 16]
We want to generate:
ubfx r3, r1, #16, #8
ldr.w r3, [r0, r3, lsl #2]
vs.
mov.w r9, #1020
and.w r2, r9, r1, lsr #14
ldr r2, [r0, r2]
Add a late ARM specific isel optimization to
ARMDAGToDAGISel::PreprocessISelDAG(). It folds the left shift to the
'base + offset' address computation; change the mask to one which doesn't have
trailing zeros and enable the use of ubfx.
Note the optimization has to be done late since it's target specific and we
don't want to change the DAG normalization. It's also fairly restrictive
as shifter operands are not always free. It's only done for lsh 1 / 2. It's
known to be free on some cpus and they are most common for address
computation.
This is a slight win for blowfish, rijndael, etc.
rdar://12870177
llvm-svn: 170581
When the least bit of C is greater than V, (x&C) must be greater than V
if it is not zero, so the comparison can be simplified.
Although this was suggested in Target/X86/README.txt, it benefits any
architecture with a directly testable form of AND.
Patch by Kevin Schoedel
llvm-svn: 170576
There's probably a better expansion for those nodes than the default for
altivec, but this is better than crashing. VSELECTs occur in loop vectorizer
output.
llvm-svn: 170551
- An MVT can become an EVT when being split (e.g. v2i8 -> v1i8, the latter doesn't exist)
- Return the scalar value when an MVT is scalarized (v1i64 -> i64)
Fixes PR14639ff.
llvm-svn: 170546
This changes adds shadow and origin propagation for unknown intrinsics
by examining the arguments and ModRef behaviour. For now, only 3 classes
of intrinsics are handled:
- those that look like simple SIMD store
- those that look like simple SIMD load
- those that don't have memory effects and look like arithmetic/logic/whatever
operation on simple types.
llvm-svn: 170530
bitwidth op back to the original size. If we reduce ANDs then this can cause
an endless loop. This patch changes the ZEXT to ANY_EXTEND if the demanded bits
are equal or smaller than the size of the reduced operation.
llvm-svn: 170505
To not over constrain the scheduler for ARM in thumb mode, some optimizations for code size reduction, specific to ARM thumb, are blocked when they add a dependency (like write after read dependency).
Disables this check when code size is the priority, i.e., code is compiled with -Oz.
llvm-svn: 170462
A register can be associated with several distinct register classes.
For example, on PPC, the floating point registers are each associated with
both F4RC (which holds f32) and F8RC (which holds f64). As a result, this code
would fail when provided with a floating point register and an f64 operand
because it would happen to find the register in the F4RC class first and
return that. From the F4RC class, SDAG would extract f32 as the register
type and then assert because of the invalid implied conversion between
the f64 value and the f32 register.
Instead, search all register classes. If a register class containing the
the requested register has the requested type, then return that register
class. Otherwise, as before, return the first register class found that
contains the requested register.
llvm-svn: 170436
compilation directory.
This defaults to the current working directory, just as it always has,
but now an assembler can choose to override it with a custom directory.
I've taught llvm-mc about this option and added a test case.
llvm-svn: 170371
This was a silly oversight, we weren't pruning allocas which were used
by variable-length memory intrinsics from the set that could be widened
and promoted as integers. Fix that.
llvm-svn: 170353
This also cleans up a bit of the memcpy call rewriting by sinking some
irrelevant code further down and making the call-emitting code a bit
more concrete.
Previously, memcpy of a subvector would actually miscompile (!!!) the
copy into a single vector element copy. I have no idea how this ever
worked. =/ This is the memcpy half of PR14478 which we probably weren't
noticing previously because it didn't actually assert.
The rewrite relies on the newly refactored insert- and extractVector
functions to do the heavy lifting, and those are the same as used for
loads and stores which makes the test coverage a bit more meaningful
here.
llvm-svn: 170338
The first half of fixing this bug was actually in r170328, but was
entirely coincidental. It did however get me to realize the nature of
the bug, and adapt the test case to test more interesting behavior. In
turn, that uncovered the rest of the bug which I've fixed here.
This should fix two new asserts that showed up in the vectorize nightly
tester.
llvm-svn: 170333
PR14478 highlights a serious problem in SROA that simply wasn't being
exercised due to a lack of vector input code mixed with C-library
function calls. Part of SROA was written carefully to handle subvector
accesses via memset and memcpy, but the rewriter never grew support for
this. Fixing it required refactoring the subvector access code in other
parts of SROA so it could be shared, and then fixing the splat formation
logic and using subvector insertion (this patch).
The PR isn't quite fixed yet, as memcpy is still broken in the same way.
I'm starting on that series of patches now.
Hopefully this will be enough to bring the bullet benchmark back to life
with the bb-vectorizer enabled, but that may require fixing memcpy as
well.
llvm-svn: 170301
Mips16 is really a processor decoding mode (ala thumb 1) and in the same
program, mips16 and mips32 functions can exist and can call each other.
If a jal type instruction encounters an address with the lower bit set, then
the processor switches to mips16 mode (if it is not already in it). If the
lower bit is not set, then it switches to mips32 mode.
The linker knows which functions are mips16 and which are mips32.
When relocation is performed on code labels, this lower order bit is
set if the code label is a mips16 code label.
In general this works just fine, however when creating exception handling
tables and dwarf, there are cases where you don't want this lower order
bit added in.
This has been traditionally distinguished in gas assembly source by using a
different syntax for the label.
lab1: ; this will cause the lower order bit to be added
lab2=. ; this will not cause the lower order bit to be added
In some cases, it does not matter because in dwarf and debug tables
the difference of two labels is used and in that case the lower order
bits subtract each other out.
To fix this, I have added to mcstreamer the notion of a debuglabel.
The default is for label and debug label to be the same. So calling
EmitLabel and EmitDebugLabel produce the same result.
For various reasons, there is only one set of labels that needs to be
modified for the mips exceptions to work. These are the "$eh_func_beginXXX"
labels.
Mips overrides the debug label suffix from ":" to "=." .
This initial patch fixes exceptions. More changes most likely
will be needed to DwarfCFException to make all of this work
for actual debugging. These changes will be to emit debug labels in some
places where a simple label is emitted now.
Some historical discussion on this from gcc can be found at:
http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.htmlhttp://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html
llvm-svn: 170279
We match the pattern "x >= y ? x-y : 0" into "subus x, y" and two special cases
if y is a constant. DAGCombiner canonicalizes those so we first have to undo the
canonicalization for those cases. The pattern occurs in gzip when the loop
vectorizer is enabled. Part of PR14613.
llvm-svn: 170273
In this case, essentially it is soft float with different library routines.
The next step will be to make this fully interoperational with mips32 floating
point and that requires creating stubs for functions with signatures that
contain floating point types.
I have a more sophisticated design for mips16 hardfloat which I hope to
implement at a later time that directly does floating point without the need
for function calls.
The mips16 encoding has no floating point instructions so one needs to
switch to mips32 mode to execute floating point instructions.
llvm-svn: 170259
immediate generates the narrow version. Needed when doing round-trip
assemble/disassemble testing using the alternate syntax that specifies
'pc' directly.
llvm-svn: 170255
for TLS dynamic models on 64-bit PowerPC ELF. The default sort routine
for relocations only sorts on the r_offset field; but with TLS, there
can be two relocations with the same r_offset. For PowerPC, this patch
sorts secondarily on descending r_type, which matches the behavior
expected by the linker.
llvm-svn: 170237
for a wider range of GOT entries that can hold thread-relative offsets.
This matches the behavior of GCC, which was not documented in the PPC64 TLS
ABI. The ABI will be updated with the new code sequence.
Former sequence:
ld 9,x@got@tprel(2)
add 9,9,x@tls
New sequence:
addis 9,2,x@got@tprel@ha
ld 9,x@got@tprel@l(9)
add 9,9,x@tls
Note that a linker optimization exists to transform the new sequence into
the shorter sequence when appropriate, by replacing the addis with a nop
and modifying the base register and relocation type of the ld.
llvm-svn: 170209
