Summary:
Once we've done our custom isel for these nodes, I think we should be calling removeDeadNode to prune them out of the DAG. Table driven isel ultimately either calls morphNodeTo which modifies a node and doesn't leave dead nodes. Or it emits new nodes and then calls removeDeadNode as part of Opc_CompleteMatch.
If you run a simple multiply test case like this through llc with -debug you'll see a umul_lohi node get printed as part of the dump for Instruction Selection ends.
```
define i64 @foo(i64 %a, i64 %b) local_unnamed_addr #0 {
entry:
%conv = zext i64 %a to i128
%conv1 = zext i64 %b to i128
%mul = mul nuw nsw i128 %conv1, %conv
%shr = lshr i128 %mul, 64
%conv2 = trunc i128 %shr to i64
ret i64 %conv2
}
```
Reviewers: RKSimon, spatel, zvi, guyblank, niravd
Reviewed By: niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37547
llvm-svn: 312857
- Use range based for
- Variable names should start with upper case
- Add `const`
- Change class name to match filename
- Fix doxygen comments
- Use MCPhysReg instead of unsigned
- Use references instead of pointers where things cannot be nullptr
- Misc coding style improvements
llvm-svn: 312846
The lxv/stxv instructions require an offset that is 0 % 16. Previously we were
selecting lxv/stxv for loads and stores to the stack where the offset from the
slot was a multiple of 16, but the stack slot was not 16 or more byte aligned.
When the frame gets lowered these transform to r(1|31) + slot + offset.
If slot is not aligned, slot + offset may not be 0 % 16.
Now we require 16 byte or more alignment for select lxv/stxv to stack slots.
Includes a testcase that shows both sufficiently and insufficiently aligned
stack slots.
llvm-svn: 312843
In function TargetTransformInfo::getInstructionCost, all enum values in the switch statement has been covered, so the default is unnecessary, and may cause error with option -Werror,-Wcovered-switch-default, so remove it.
llvm-svn: 312834
Fixed an issue in printImm64Operand where if the value is
an expression, print out the expression properly. Currently,
it will print
r1 = <MCOperand Expr:(tx_port)>ll
With the patch, the printout will be
r1 = tx_port
Suggested-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 312833
Current TargetTransformInfo can support throughput cost model and code size model, but sometimes we also need instruction latency cost model in different optimizations. Hal suggested we need a single public interface to query the different cost of an instruction. So I proposed following interface:
enum TargetCostKind {
TCK_RecipThroughput, ///< Reciprocal throughput.
TCK_Latency, ///< The latency of instruction.
TCK_CodeSize ///< Instruction code size.
};
int getInstructionCost(const Instruction *I, enum TargetCostKind kind) const;
All clients should mainly use this function to query the cost of an instruction, parameter <kind> specifies the desired cost model.
This patch also provides a simple default implementation of getInstructionLatency.
The default getInstructionLatency provides latency numbers for only small number of instruction classes, those latency numbers are only reasonable for modern OOO processors. It can be extended in following ways:
Add more detail into this function.
Add getXXXLatency function and call it from here.
Implement target specific getInstructionLatency function.
Differential Revision: https://reviews.llvm.org/D37170
llvm-svn: 312832
The default host target for builtins and runtimes has special behavior
on some platforms, e.g. on Linux both i386 and x86_64 targets are being
built. Specifying "default" as a target name should lead to the same
behavior, which wasn't the case in the past. This patch unifies the
configuration between the non-target and "default" target to produce the
same behavior by moving the default configuration into a function that
can be used from both paths.
Differential Revision: https://reviews.llvm.org/D37450
llvm-svn: 312831
On a Windows bot, I see a FileCheck error where the source being matched
over no longer exists, i.e it seems like it's FileCheck'ing some stale
output:
http://lab.llvm.org:8011/builders/llvm-clang-x86_64-expensive-checks-win/builds/4747
You can see "// CHECK: [[@LINE]]|{{ +}Marker at 19:3 = 1" in the
FileCheck stderr, but that CHECK line doesn't exist.
Remove the input file to FileCheck before running the test, to try and
appease the bot.
llvm-svn: 312825
We have a lot of operand definition work essentially producing
every valid permutation of operands to workaround builiding
operand lists based on the instruction features. Apparently tablegen
already has a mostly undocumented operator to concat dags which
simplies this.
Convert one simple place to use this. The BUF instruction definitions
have much more complicated logic that can be totally rewritten now.
llvm-svn: 312822
The various scalar bit operations set SCC,
so one is erased or moved it needs to be recomputed.
Not sure why the existing tests don't fail on this.
llvm-svn: 312819
A coverage segment contains a starting line and column, an execution
count, and some other metadata. Clients of the coverage library use
segments to prepare line-oriented reports.
Users of the coverage library depend on segments being unique and sorted
in source order. Currently this is not guaranteed (this is why the clang
change which introduced deferred regions was reverted).
This commit documents the "unique and sorted" condition and asserts that
it holds. It also fixes the SegmentBuilder so that it produces correct
output in some edge cases.
Testing: I've added unit tests for some edge cases. I've also checked
that the new SegmentBuilder implementation is fully covered. Apart from
running check-profile and the llvm-cov tests, I've successfully used a
stage1 llvm-cov to prepare a coverage report for an instrumented clang
binary.
Differential Revision: https://reviews.llvm.org/D36813
llvm-svn: 312817
Each source region has a start and end location. Report an error when
the end location does not precede the begin location.
The old lineExecutionCounts.covmapping test actually had a buggy source
region in it. This commit introduces a regenerated copy of the coverage
and moves the old copy to malformedRegions.covmapping, for a test.
Differential Revision: https://reviews.llvm.org/D37387
llvm-svn: 312814
Make sure that the text and html emitters always emit the same set of
region markers, and avoid emitting redundant markers for line segments
which don't end on the line they start on.
This is related to D35925, and depends on D36014
Differential Revision: https://reviews.llvm.org/D36020
llvm-svn: 312813
rL312641 Allowed llvm.memcpy/memset/memmove to be tail calls when parent
function return the intrinsics's first argument. However on arm-none-eabi
platform, llvm.memcpy will be expanded to __aeabi_memcpy which doesn't
have return value. The fix is to check the libcall name after expansion
to match "memcpy/memset/memmove" before allowing those intrinsic to be
tail calls.
llvm-svn: 312799
SLP vectorizer supports horizontal reductions for Add/FAdd binary
operations. Patch adds support for horizontal min/max reductions.
Function getReductionCost() is split to getArithmeticReductionCost() for
binary operation reductions and getMinMaxReductionCost() for min/max
reductions.
Patch fixes PR26956.
Differential revision: https://reviews.llvm.org/D27846
llvm-svn: 312791
This patch adds prologue verification, which is already present in
Apple's dwarfdump. It checks for invalid directory indices and warns
about duplicate file paths.
Differential revision: https://reviews.llvm.org/D37511
llvm-svn: 312782
Summary:
This fixes code-gen for XRay in PPC. The regression wasn't caught by
codegen tests which we add in this change.
What happened was the following:
- For tail exits, we used to unconditionally prepend the returns/exits
with a pseudo-instruction that gets lowered to the instrumentation
sled (and leave the actual return/exit instruction as-is).
- Changes to the XRay instrumentation pass caused the tail exits to
suddenly also emit the tail exit pseudo-instruction, since the check
for whether a return instruction was also a call instruction meant it
was a tail exit instruction.
- None of the tests caught the regression either due to non-existent
tests, or the tests being disabled/removed for continuous breakage.
This change re-introduces some of the basic tests and verifies that
we're back to a state that allows the back-end to generate appropriate
XRay instrumented binaries for PPC in the presence of tail exits.
Reviewers: echristo, timshen
Subscribers: nemanjai, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D37570
llvm-svn: 312772
cover the bitwise operators.
Nothing really exciting here, this just stamps out the rest of the core
operations that can RMW memory and set flags.
Still not implemented here: ADC, SBB. Those will require more
interesting logic to channel the flags *in*, and I'm not currently
planning to try to tackle that. It might be interesting for someone who
wants to improve our code generation for bignum implementations.
Differential Revision: https://reviews.llvm.org/D37141
llvm-svn: 312768
This is required when targeting COFF, as the comdat name must match
one of the names of the symbols in the comdat.
Differential Revision: https://reviews.llvm.org/D37550
llvm-svn: 312767
operands and used flags to support matching immediate operands.
This is a bit trickier than register operands, and we still want to fall
back on a register operands even for things that appear to be
"immediates" when they won't actually select into the operation's
immediate operand. This also requires us to handle things like selecting
`sub` vs. `add` to minimize the number of bits needed to represent the
immediate, and picking the shortest immediate encoding. In order to
that, we in turn need to scan to make sure that CF isn't used as it will
get inverted.
The end result seems very nice though, and we're now generating
optimal instruction sequences for these patterns IMO.
A follow-up patch will further expand this to other operations with RMW
memory operands. But handing `add` and `sub` are useful starting points
to flesh out the machinery and make sure interesting and complex cases
can be handled.
Thanks to Craig Topper who provided a few fixes and improvements to this
patch in addition to the review!
Differential Revision: https://reviews.llvm.org/D37139
llvm-svn: 312764
Most callers were not expecting the exit(0) and trying to exit with a
different value.
This also adds back the call to cl::PrintHelpMessage in llvm-ar.
llvm-svn: 312761
r312318 - Debug info for variables whose type is shrinked to bool
r312325, r312424, r312489 - Test case for r312318
Revision 312318 introduced a null dereference bug.
Details in https://bugs.llvm.org/show_bug.cgi?id=34490
llvm-svn: 312758
As is indexes above SHN_LORESERVE will not be handled correctly because
they'll be treated as indexes of sections rather than special values
that should just be copied. This change adds support to copy them
though.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D37393
llvm-svn: 312756
