The tool reports verbose output for the DWARF debug location coverage.
The llvm-locstats for each variable or formal parameter DIE computes what
percentage from the code section bytes, where it is in scope, it has
location description. The line 0 shows the number (and the percentage) of
DIEs with no location information, but the line 100 shows the number (and
the percentage) of DIEs where there is location information in all code
section bytes (where the variable or parameter is in the scope). The line
50..59 shows the number (and the percentage) of DIEs where the location
information is in between 50 and 59 percentage of its scope covered.
Differential Revision: https://reviews.llvm.org/D66526
llvm-svn: 373317
The tool reports verbose output for the DWARF debug location coverage.
The llvm-locstats for each variable or formal parameter DIE computes what
percentage from the code section bytes, where it is in scope, it has
location description. The line 0 shows the number (and the percentage) of
DIEs with no location information, but the line 100 shows the number (and
the percentage) of DIEs where there is location information in all code
section bytes (where the variable or parameter is in the scope). The line
50..59 shows the number (and the percentage) of DIEs where the location
information is in between 50 and 59 percentage of its scope covered.
Differential Revision: https://reviews.llvm.org/D66526
llvm-svn: 373183
The tool reports verbose output for the DWARF debug location coverage.
The llvm-locstats for each variable or formal parameter DIE computes what
percentage from the code section bytes, where it is in scope, it has
location description. The line 0 shows the number (and the percentage) of
DIEs with no location information, but the line 100 shows the number (and
the percentage) of DIEs where there is location information in all code
section bytes (where the variable or parameter is in the scope). The line
50..59 shows the number (and the percentage) of DIEs where the location
information is in between 50 and 59 percentage of its scope covered.
Differential Revision: https://reviews.llvm.org/D66526
llvm-svn: 372554
Fixes quoting of profile arguments to work on Windows
Suppresses adding profile arguments to linker flags when using lld-link
Avoids -fprofile-instr-use being added to rc.exe flags
Removes duplicated adding of -fprofile-instr-use to linker flags (since
r355541)
Move handling LLVM_PROFDATA_FILE to HandleLLVMOptions.cmake
Differential Revision: https://reviews.llvm.org/D62063
llvm-svn: 372209
The tool reports verbose output for the DWARF debug location coverage.
The llvm-locstats for each variable or formal parameter DIE computes what
percentage from the code section bytes, where it is in scope, it has
location description. The line 0 shows the number (and the percentage) of
DIEs with no location information, but the line 100 shows the number (and
the percentage) of DIEs where there is location information in all code
section bytes (where the variable or parameter is in the scope). The line
50..59 shows the number (and the percentage) of DIEs where the location
information is in between 50 and 59 percentage of its scope covered.
The tool will be very useful for tracking improvements regarding the
"debugging optimized code" support with LLVM ecosystem.
Differential Revision: https://reviews.llvm.org/D66526
llvm-svn: 371520
This reverts r369486 (git commit 8d18384809957cc923752e10a86adab129e3df48)
The opt-viewer tests don't pass after this change, and fixing them isn't
trivial. opt-viewer.py imports optmap, which requires adjusting
pythonpath, which is more work than I'm willing to do to fix forward.
llvm-svn: 370095
Summary:
Since these files depend on the built python modules, they need to use
the right python binary to run them. So use configure_file
to set the right shebang line.
Patch By: cbiesinger (Christian Biesinger)
Reviewers: chandlerc, beanz, anemet
Reviewed By: anemet
Subscribers: compnerd, JDevlieghere, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65983
llvm-svn: 369486
It is sometimes useful to have the C++ standard library linked into the
assembly when compiling clang, particularly when distributing a compiler
onto systems that don't have a copy of stdlibc++ or libc++ installed.
This functionality should work with either GCC or Clang as the host
compiler, though statically linking libc++ (as may be required for
licensing purposes) is only possible if the host compiler is Clang with
a copy of libc++ available.
Differential Revision: https://reviews.llvm.org/D65603
llvm-svn: 368907
Add user enabled option to create lipo with symlink to llvm-lipo
Used rL326381 for reference.
Differential Revision: https://reviews.llvm.org/D65477
llvm-svn: 367444
This is the compantion patch to https://reviews.llvm.org/D64482, needed to ensure
that builds with host compilers that don't yet predefine _FILE_OFFSET_BITS=64 on
Solaris succeed by always making the host and freshly built clang consistent.
Tested on x86_64-pc-solaris2.11.
Differential Revision: https://reviews.llvm.org/D64483
llvm-svn: 367304
lldb recently added a tablegen tool. In order to properly cross compile
lldb standalone there needs to be a mechanism to generate the native
lldb build, analgous to what's done for the NATIVE llvm build. Thus,
we can simply modify this setup to allow for any project to be used.
llvm-svn: 366514
Until recently, Python_ADDITIONAL_VERSIONS was used to limit LLVM's
Python support to 2.7. Now that both LLVM and LLDB both support Python
3, there's no longer a need to put an arbitrary limit on this.
However, instead of removing the variable, r365692 expanded the list,
which has the (presumably unintentional) side-effect of expression
preference for Python 3.
Instead, as Michal proposed in the original code review, we should just
not set the list at all, and let CMake pick whatever Python interpreter
you have in your path.
This patch removes the Python_ADDITIONAL_VERSIONS variable in llvm,
clang and lld. I've also updated the docs with the default behavior and
how to force a different Python version to be used.
Differential revision: https://reviews.llvm.org/D64894
llvm-svn: 366447
This follows the RFC <http://lists.llvm.org/pipermail/llvm-dev/2019-July/133724.html>.
Follow-on commits will add appropriate release notes changes etc.
Pushing this now and in a minimal form so there is reasonable time before 9.0
branches to resolve any issues arising from e.g. the backend being exposed on
different sanitizer setups.
The current builder for RISC-V is on the staging build-bot
<http://lab.llvm.org:8014/builders/llvm-riscv-linux>, however with the RISCV
backend being built by default it won't provide any real additional coverage.
We will shortly set up a builder that runs the test-suite in qemu-user.
llvm-svn: 366331
Summary:
CMake+Xcode doesn't seem to handle targets that only have object
sources. This patch works around that limitation by adding a dummy
soruce file to any library target that is generated by llvm_add_library
when object libraries are generated.
Object libraries are generated whenever llvm_add_library is passed more
than one library type, which is now the default case for clang static
libraries (which generate STATIC and OBJECT libraries).
Reviewers: zturner, compnerd, joanlluch
Reviewed By: joanlluch
Subscribers: joanlluch, xbolva00, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64300
llvm-svn: 365365
This extracts the LLVM distribution target handling into a support module.
Extraction will enable us to restructure the builds to support multiple
distribution configurations (e.g. developer and user) to permit us to build the
development package and the user package at once.
llvm-svn: 363440
Summary:
It is useful to build with _XOPEN_SOURCE defined on AIX, enabling X/Open
and POSIX compatibility mode, to work around stray macros and other
bugs in the headers provided by the system and build compiler.
This patch adds the config to cmake to build with _XOPEN_SOURCE defined
on AIX with a few exceptions. Google Test internals require access to
platform specific thread info constructs on AIX so in that case we build
with _ALL_SOURCE defined instead. Libclang also uses header which needs
_ALL_SOURCE on AIX so we leave that as is as well.
We also add building on AIX with the large file API and doing CMake
header checks with X/OPEN definitions so the results are consistent with
the environment that will be present in the build.
Reviewers: hubert.reinterpretcast, xingxue, andusy
Reviewed By: hubert.reinterpretcast
Subscribers: mgorny, jsji, cfe-commits, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D62533
llvm-svn: 362808
Recommit of r361790 that was temporarily reverted in r361793 due to bot breakage.
Summary:
The following changes were required to fix these tests:
1) Change LLVM_ENABLE_PLUGINS to an option and move it to
llvm/CMakeLists.txt with an appropriate default -- which matches
the original default behavior.
2) Move the plugins directory from clang/test/Analysis
clang/lib/Analysis. It's not enough to add an exclude to the
lit.local.cfg file because add_lit_testsuites recurses the tree and
automatically adds the appropriate `check-` targets, which don't
make sense for the plugins because they aren't tests and don't
have `RUN` statements.
Here's a list of the `clang-check-anlysis*` targets with this
change:
```
$ ninja -t targets all| sed -n "s/.*\/\(check[^:]*\):.*/\1/p" | sort -u | grep clang-analysis
check-clang-analysis
check-clang-analysis-checkers
check-clang-analysis-copypaste
check-clang-analysis-diagnostics
check-clang-analysis-engine
check-clang-analysis-exploration_order
check-clang-analysis-html_diagnostics
check-clang-analysis-html_diagnostics-relevant_lines
check-clang-analysis-inlining
check-clang-analysis-objc
check-clang-analysis-unified-sources
check-clang-analysis-z3
```
3) Simplify the logic and only include the subdirectories under
clang/lib/Analysis/plugins if LLVM_ENABLE_PLUGINS is set.
Reviewed By: NoQ
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62445
llvm-svn: 362328
LLVM CMake build already uses libtool instead of ar when building
for Apple platform and we should be using the same when building
runtimes. To do so, this change extracts the logic for finding
libtool into a separate file and then uses it from both the LLVM
build as well as the LLVM runtimes build.
Differential Revision: https://reviews.llvm.org/D62769
llvm-svn: 362313
This reverts r361790 (git commit fe5eaab2b5b4523886bd63aebcfea8cfce586fa1)
It's causing buildbot breakage, so reverting while I investigate.
llvm-svn: 361793
Summary:
The following changes were required to fix these tests:
1) Change LLVM_ENABLE_PLUGINS to an option and move it to
llvm/CMakeLists.txt with an appropriate default -- which matches
the original default behavior.
2) Move the plugins directory from clang/test/Analysis
clang/lib/Analysis. It's not enough to add an exclude to the
lit.local.cfg file because add_lit_testsuites recurses the tree and
automatically adds the appropriate `check-` targets, which don't
make sense for the plugins because they aren't tests and don't
have `RUN` statements.
Here's a list of the `clang-check-anlysis*` targets with this
change:
```
$ ninja -t targets all| sed -n "s/.*\/\(check[^:]*\):.*/\1/p" | sort -u | grep clang-analysis
check-clang-analysis
check-clang-analysis-checkers
check-clang-analysis-copypaste
check-clang-analysis-diagnostics
check-clang-analysis-engine
check-clang-analysis-exploration_order
check-clang-analysis-html_diagnostics
check-clang-analysis-html_diagnostics-relevant_lines
check-clang-analysis-inlining
check-clang-analysis-objc
check-clang-analysis-unified-sources
check-clang-analysis-z3
```
3) Simplify the logic and only include the subdirectories under
clang/lib/Analysis/plugins if LLVM_ENABLE_PLUGINS is set.
Reviewed By: NoQ
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62445
llvm-svn: 361790
The current code iterates over the combination of LLVM_EXTERNAL_PROJECTS
and LLVM_ENABLE_PROJECTS, but then disables projects that are only in
the former. If a project is in LLVM_EXTERNAL_PROJECTS, it should be
enabled.
See also llvm-commits thread on r354060.
Differential revision: https://reviews.llvm.org/D62289
llvm-svn: 361751
Enable CMake policy 77. This alters the behavior of option. The old behavior
would remove the value of the option from the cache and create a new one. The
new behavior does not create the variable if it is defined already. This ensures
that subsequent reconfigures will behave identically. This seems better than the
setting of OLD - the desire is to ensure that it is set to OLD or NEW.
llvm-svn: 361307
The unwind tables (`.eh_frame`, `.arm.extab`) add a significant chunk of data to
the final binaries. These should not be needed normally, particularly when
exceptions are disabled. This enables shrinking `lldb-server` by ~18% (3 MiB)
when built with gold.
llvm-svn: 359819
Standalone builds of projects other than llvm itself (lldb, libcxx,
etc) include HandleLLVMOptions but not the top level llvm CMakeLists,
so we need to set this variable here to ensure that it always has a
value.
This should fix the build issues some folks have been seeing.
llvm-svn: 357976
Simplify building with particular C++ standards by replacing the
specific "enable standard X" flags with a flag that allows specifying
the standard you want directly.
We preserve compatibility with the existing flags so that anyone with
those flags in existing caches won't break mysteriously.
Differential Revision: https://reviews.llvm.org/D60399
llvm-svn: 357899
As discovered in D56774 the command line gets to long, so use a response file
to give the script the libs. This change has been tested and is confirmed
working for me.
Commited on behalf of Jakob Bornecrantz.
Differential Revision: https://reviews.llvm.org/D56781
llvm-svn: 356443
LLVM is always built; including it in LLVM_ENABLE_PROJECTS has no
effect, but since it's in LLVM_ALL_PROJECTS, we produce a confusing
message about it being disabled. Drop it from LLVM_ALL_PROJECTS to avoid
this. Pointed out by David Greene on the mailing list [1].
[1] http://lists.llvm.org/pipermail/llvm-dev/2019-March/130854.html
llvm-svn: 355735
Part 4 of CSPGO changes:
(1) add support in cmake for cspgo build.
(2) fix an issue in big endian.
(3) test cases.
Differential Revision: https://reviews.llvm.org/D54175
llvm-svn: 355541
When LLVM_ENABLE_PROJECTS is set, CMake assumes the project
directories are all side-by-side. This is not always the case and
there's no reason to expect it if LLVM_EXTERNAL_<proj>_SOURCE_DIR is
set. Honor that setting if it exists and allow the build configuration
to continue.
Differential Revision: https://reviews.llvm.org/D49672
llvm-svn: 354693
LLVM r353148, changed the circumstances in which the project source directory variables are created to only create them for LLVM projects. This patch initializes the directory variables for projects specified in `LLVM_EXTERNAL_PROJECTS` as well.
llvm-svn: 354060
If you want to build clang-tools-extra with monorepo, just add it to
LLVM_ENABLE_PROJECTS like with other projects.
See also "Separating clang-tools-extra from clang in LLVM_ENABLE_PROJECTS"
on cfe-dev.
Differential Revision: https://reviews.llvm.org/D58157
llvm-svn: 354057
Summary:
The RFC on moving past C++11 got good traction:
http://lists.llvm.org/pipermail/llvm-dev/2019-January/129452.html
This patch therefore bumps the toolchain versions according to our policy:
llvm.org/docs/DeveloperPolicy.html#toolchain
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits, mehdi_amini, jyknight, rsmith, chandlerc, smeenai, hans, reames, lattner, lhames, erichkeane
Differential Revision: https://reviews.llvm.org/D57264
llvm-svn: 353374
We iterate over the list and only enable projects from that list that
are present in LLVM_ENABLE_PROJECTS and disable all other projects. Most
users will only specify clang in LLVM_ENABLE_PROJECTS and expect
clang-tools-extra to be implicitly enabled, so remove clang-tools-extra
from LLVM_ALL_PROJECTS so that it doesn't get disabled instead.
llvm-svn: 353354
Make LLVM_ALL_PROJECTS reflect all top-level directories in the monorepo
rather than an arbitrary subset. clang-tools-extra is technically
unnecessary since it gets enabled by clang, but having it there for
consistency shouldn't hurt either.
Differential Revision: https://reviews.llvm.org/D57843
llvm-svn: 353346
Previously, there were two different scripts for generating VCS headers:
one used by LLVM and one used by Clang and lldb. They were both similar,
but different. They were both broken in their own ways, for example the
one used by Clang didn't properly handle monorepo resulting in an
incorrect version information reported by Clang.
This change unifies two the scripts by introducing a new script that's
used from both LLVM, Clang and lldb, ensures that the new script
supports both monorepo and standalone SVN and Git setups, and removes
the old scripts.
Differential Revision: https://reviews.llvm.org/D57063
llvm-svn: 353268
LLVM_ENABLED_PROJECT and reconfigured it had no effect on what
projects were actually built. This was very confusing behaviour. The
reason for this is that the value of the `LLVM_TOOL_<PROJECT>_BUILD`
variables are already set.
The problem here is that we have two sources of truth:
* The projects listed in LLVM_ENABLE_PROJECTS.
* The projects enabled/disabled with LLVM_TOOL_<PROJECT>_BUILD.
At configure time we have no real way of knowing which source of truth
the user wants so we apply the following heuristic:
If the user ever sets `LLVM_ENABLE_PROJECTS` in the CMakeCache then that
is used as the single source of truth and we force the
`LLVM_TOOL_<PROJECT>_BUILD` CMake cache variables to have the
appropriate values that match the contents of the
`LLVM_ENABLE_PROJECTS`. If the user never sets `LLVM_ENABLE_PROJECTS`
then they can continue to use and set the `LLVM_TOOL_<PROJECT>_BUILD`
variables as the "source of truth".
The problem with this approach is that if the user ever tries to use
both `LLVM_ENABLE_PROJECTS` and `LLVM_TOOL_<PROJECT>_BUILD` for the same
build directory then any user set value for `LLVM_TOOL_<PROJECT>_BUILD`
variables will get overwriten, likely without the user noticing.
Hopefully the above shouldn't matter in practice because the
LLVM_TOOL_<PROJECT>_BUILD variables are not documented, but
LLVM_ENABLE_PROJECTS is.
We should probably deprecate the `LLVM_TOOL_<PROJECT>_BUILD`
variables at some point by turning them into to regular CMake
variables that don't live in the CMake cache.
Differential Revision: https://reviews.llvm.org/D57535
llvm-svn: 353148
Reverting D57264 again, it looks like we're down to two bots that need fixing:
polly-amd64-linux
polly-arm-linux
They both have old versions of libstdc++ and recent clang.
llvm-svn: 352954
Summary:
The RFC on moving past C++11 got good traction:
http://lists.llvm.org/pipermail/llvm-dev/2019-January/129452.html
This patch therefore bumps the toolchain versions according to our policy:
llvm.org/docs/DeveloperPolicy.html#toolchain
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits, mehdi_amini, jyknight, rsmith, chandlerc, smeenai, hans, reames, lattner, lhames, erichkeane
Differential Revision: https://reviews.llvm.org/D57264
llvm-svn: 352951
Summary:
The RFC on moving past C++11 got good traction:
http://lists.llvm.org/pipermail/llvm-dev/2019-January/129452.html
This patch therefore bumps the toolchain versions according to our policy:
llvm.org/docs/DeveloperPolicy.html#toolchain
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits, mehdi_amini, jyknight, rsmith, chandlerc, smeenai, hans, reames, lattner, lhames, erichkeane
Differential Revision: https://reviews.llvm.org/D57264
llvm-svn: 352834
A handful of bots are still breaking, either because I missed them in my audit,
they were offline, or something else. I'm contacting their authors, but I'll
revert for now and re-commit later.
llvm-svn: 352814
Summary:
The RFC on moving past C++11 got good traction:
http://lists.llvm.org/pipermail/llvm-dev/2019-January/129452.html
This patch therefore bumps the toolchain versions according to our policy:
llvm.org/docs/DeveloperPolicy.html#toolchain
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits, mehdi_amini, jyknight, rsmith, chandlerc, smeenai, hans, reames, lattner, lhames, erichkeane
Differential Revision: https://reviews.llvm.org/D57264
llvm-svn: 352811
Previously, there were two different scripts for generating VCS headers:
one used by LLVM and one used by Clang. They were both similar, but
different. They were both broken in their own ways, for example the one
used by Clang didn't properly handle monorepo resulting in an incorrect
version information reported by Clang.
This change unifies two the scripts by introducing a new script that's
used from both LLVM and Clang, ensures that the new script supports both
monorepo and standalone SVN and Git setups, and removes the old scripts.
Differential Revision: https://reviews.llvm.org/D57063
llvm-svn: 352729
They were breaking the Windows build when using MSBuild, see the
discussion on D56781.
r351833: "Use response file when generating LLVM-C.dll"
> Use response file when generating LLVM-C.dll
>
> As discovered in D56774 the command line gets to long, so use a response file to give the script the libs. This change has been tested and is confirmed working for me.
>
> Commited on behalf of Jakob Bornecrantz
>
> Differential Revision: https://reviews.llvm.org/D56781
r352250: "Build LLVM-C.dll by default on windows and enable in release package"
> Build LLVM-C.dll by default on windows and enable in release package
>
> With the fixes to the building of LLVM-C.dll in D56781 this should now
> be safe to land. This will greatly simplify dealing with LLVM for people
> that just want to use the C API on windows. This is a follow up from
> D35077.
>
> Patch by Jakob Bornecrantz!
>
> Differential revision: https://reviews.llvm.org/D56774
llvm-svn: 352492
With the fixes to the building of LLVM-C.dll in D56781 this should now
be safe to land. This will greatly simplify dealing with LLVM for people
that just want to use the C API on windows. This is a follow up from
D35077.
Patch by Jakob Bornecrantz!
Differential revision: https://reviews.llvm.org/D56774
llvm-svn: 352250
This broke the build, ending up with too long command-lines when invoking gen-mscv-exports.py.
> As it says in the subject, should have gone long enough now that this
> should be safe. This will greatly simplify dealing with LLVM for people
> that just want to use the C API on windows. This is a follow up from
> D35077.
>
> Patch by Jakob Bornecrantz!
>
> Differential revision: https://reviews.llvm.org/D56774
llvm-svn: 351329
As it says in the subject, should have gone long enough now that this
should be safe. This will greatly simplify dealing with LLVM for people
that just want to use the C API on windows. This is a follow up from
D35077.
Patch by Jakob Bornecrantz!
Differential revision: https://reviews.llvm.org/D56774
llvm-svn: 351324
- Disable incremental linking by default. /INCREMENTAL adds extra thunks in the EXE, which makes execution slower.
- Set /MT (static CRT lib) by default instead of CMake's default /MD (dll CRT lib). The previous default /MD makes all DLL functions to be thunked, thus making execution slower (memcmp, memset, etc.)
- Adds LLVM_ENABLE_INCREMENTAL_LINK which is set to OFF by default.
Differential revision: https://reviews.llvm.org/D55056
llvm-svn: 349517
Summary:
Currently we can't install the modulemaps provided by LLVM, since they are not structured to support headers generated as part of the build (ex. `llvm/IR/Attributes.gen`).
This patch restructures the module maps in order to support installation.
Modules containing generated headers are defined in the new `module.extern.modulemap` file, and are referenced from the main `module.modulemap` using `extern module`. There are two versions of the `module.extern.modulemap` file; one used when building and another, `module.install.modulemap`, which is re-named during installation.
Users can opt-into module map installation using `-DLLVM_INSTALL_MODULEMAPS=ON`. The default value is `OFF` due to llvm.org/PR31905.
Reviewers: rsmith, mehdi_amini, bruno, EricWF
Reviewed By: EricWF
Subscribers: tschuett, chapuni, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D53510
llvm-svn: 347420
Summary: Allow code-signing with entitlements. FORCE may be used to avoid an error when replacing existing signatures.
Reviewers: beanz, bogner
Reviewed By: beanz
Subscribers: mgorny, llvm-commits, lldb-commits
Differential Revision: https://reviews.llvm.org/D54443
llvm-svn: 347068
Make the check_include_file* macros honor CMAKE_REQUIRED_LIBRARIES. This
shouldn't cause any of the configuration checks to give different
results (and I did clean configures before and after this change and
confirmed that the resulting CMake caches were identical, though of
course that's just one machine). This suppresses a warning when building
with CMake 3.12 or later.
This doesn't suppress the warning in clang, because clang does its own
cmake_minimum_required call even when being built in-tree, and that
resets all policy settings. I'll address that separately.
Differential Revision: https://reviews.llvm.org/D54236
llvm-svn: 346377
Summary:
Code in config-ix tries to call `PYTHON_EXECUTABLE` to search for some
python modules but that variable isn't set until the moved chunk of
code that finds Python is called.
Reorder it so CMake can use PYTHON_EXECUTABLE
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D52763
llvm-svn: 346367
There are several places where we use CMAKE_CONFIGURATION_TYPES to determine if we are using an IDE generator and in turn decide not to generate some of the convenience targets (like all the install-* and check-llvm-* targets). This decision is made because IDEs don't always deal well with the thousands of targets LLVM can generate.
This approach does not work for Visual Studio 15's new CMake integration. Because VS15 uses a Ninja generator, it isn't a multi-configuration build, and generating all these extra targets mucks up the UI and adds little value.
With this change we still don't generate these targets by default for Visual Studio and Xcode generators, and LLVM_ENABLE_IDE becomes a switch that can be enabled on the VS15 CMake builds, to improve the IDE experience.
This is a re-land of r340435, with a few minor fix-ups. The issues causing the revert were addressed in r344218, r344219, and r344553.
llvm-svn: 344555
Summary:
After fixing memory leaks in rL343362 and rL343733 the sanitizer builds are
clean and we should be good to build by default again.
Differential Revision: https://reviews.llvm.org/D52850
llvm-svn: 343746
There is a memory leak which is detected in some of the sanitizer builds.
MCSymbolWasm contains SmallVectors for holding signature information,
however MCContext doesn't run destructors for MCSymbols, so in cases
where the SmallVectors heap-allocate, the memory is leaked.
llvm-svn: 342707
This makes WebAssembly build by default, rather than requiring
LLVM_EXPERIMENTAL_TARGETS_TO_BUILD!
Differential Revision: https://reviews.llvm.org/D43211
llvm-svn: 342701
The assertion in MCCodeView.cpp was resolved in r340878.
This reverts both r340905 and r340836, making benchmarks build by
default everywhere.
llvm-svn: 341716
This simplifies installing all LLVM libraries when doing component
build; now you can include llvm-libraries in distribution components.
Differential Revision: https://reviews.llvm.org/D51603
llvm-svn: 341395
That resulted in the check-llvm-* targets not being avaliable
in the QtCreator-configured build directories.
Moreover, that was a clearly non-NFC change, and i can't find any review
for it.
This reverts commit rL340435.
llvm-svn: 341045
The problems with benchmark build should be fixed now, but Windows
buildbots still run into errors seemingly because of the bug in
clang-cl. Because of that, benchmark shouldn't be built on Windows at
this point.
llvm-svn: 340905
This is cleanup after newly introduced google/benchmark library
(rL340809). Many buildbots fail to identify regex engine support, so
this should presumably fix the issue.
llvm-svn: 340827
This patch pulls google/benchmark v1.4.1 into the LLVM tree so that any
project could use it for benchmark generation. A dummy benchmark is
added to `llvm/benchmarks/DummyYAML.cpp` to validate the correctness of
the build process.
The current version does not utilize LLVM LNT and LLVM CMake
infrastructure, but that might be sufficient for most users. Two
introduced CMake variables:
* `LLVM_INCLUDE_BENCHMARKS` (`ON` by default) generates benchmark
targets
* `LLVM_BUILD_BENCHMARKS` (`OFF` by default) adds generated
benchmark targets to the list of default LLVM targets (i.e. if `ON`
benchmarks will be built upon standard build invocation, e.g. `ninja` or
`make` with no specific targets)
List of modifications:
* `BENCHMARK_ENABLE_TESTING` is disabled
* `BENCHMARK_ENABLE_EXCEPTIONS` is disabled
* `BENCHMARK_ENABLE_INSTALL` is disabled
* `BENCHMARK_ENABLE_GTEST_TESTS` is disabled
* `BENCHMARK_DOWNLOAD_DEPENDENCIES` is disabled
Original discussion can be found here:
http://lists.llvm.org/pipermail/llvm-dev/2018-August/125023.html
Reviewed by: dberris, lebedev.ri
Subscribers: ilya-biryukov, ioeric, EricWF, lebedev.ri, srhines,
dschuff, mgorny, krytarowski, fedor.sergeev, mgrang, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50894
llvm-svn: 340809
This was needed way back because we didn't properly handle that the SOURCES property of a target could have things that weren't source files to compile. Almost 2 years ago Takumi fixed that, and now CMake is throwing warnings that we should get off the old behavior.
llvm-svn: 340436
There are several places where we use CMAKE_CONFIGURATION_TYPES to determine if we are using an IDE generator and in turn decide not to generate some of the convenience targets (like all the install-* and check-llvm-* targets). This decision is made because IDEs don't always deal well with the thousands of targets LLVM can generate.
This approach does not work for Visual Studio 15's new CMake integration. Because VS15 uses a Ninja generator, it isn't a multi-configuration build, and generating all these extra targets mucks up the UI and adds little value.
With this change we still don't generate these targets by default for Visual Studio and Xcode generators, and LLVM_ENABLE_IDE becomes a switch that can be enabled on the VS15 CMake builds, to improve the IDE experience.
llvm-svn: 340435
Since crash dumping landed in r268519, May 2016, I have not once seen
anyone use an uploaded minidump to debug a compiler crash. Therefore,
I'm turning this off by default. The dumps clutter up user and buildbot
temp directories. Each file is only about 56KB, but it adds up.
In the context of clang, the extra line about the minidump confuses
users, when what we really want from them is the pre-processed source
code.
llvm-svn: 340185
Summary:
Hello!
This commit adds a LLVM-C target that is always built on MSVC. A big fat warning, this is my first cmake code ever so there is a fair bit of I-have-no-idea-what-I'm-doing going on here. Which is also why I placed it outside of llvm-shlib as I was afraid of breaking things of other people. Secondly llvm-shlib builds a LLVM.so which exports all symbols and then does a thin library that points to it, but on Windows we do not build a LLVM.dll so that would have complicated the code more.
The patch includes a python script that calls dumpbin.exe to get all of the symbols from the built libraries. It then grabs all the symbols starting with LLVM and generates the export file from those. The export file is then used to create the library just like the LLVM-C that is built on darwin.
Improvements that I need help with, to follow up this review.
- Get cmake to make sure that dumpbin.exe is on the path and wire the full path to the script.
- Use LLVM-C.dll when building llvm-c-test so we can verify that the symbols are exported.
- Bundle the LLVM-C.dll with the windows installer.
Why do this? I'm building a language frontend which is self-hosting, and on windows because of various tooling issues we have a problem of consuming the LLVM*.lib directly on windows. Me and the users of my projects using LLVM would be greatly helped by having LLVM-C.dll built and shipped by the Windows installer. Not only does LLVM takes forever to build, you have to run a extra python script in order to get the final DLL.
Any comments, thoughts or help is greatly appreciated.
Cheers, Jakob.
Patch by: Wallbraker (Jakob Bornecrantz)
Reviewers: compnerd, beanz, hans, smeenai
Reviewed By: beanz
Subscribers: xbolva00, bhelyer, Memnarch, rnk, fedor.sergeev, chapuni, smeenai, john.brawn, deadalnix, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D35077
llvm-svn: 339151
Summary:
This option is no longer needed since r300496 added symbol
versioning by default
Reviewers: sylvestre.ledru, beanz, mgorny
Reviewed By: mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49835
llvm-svn: 338751
This new JIT event listener supports generating profiling data for
the linux 'perf' profiling tool, allowing it to generate function and
instruction level profiles.
Currently this functionality is not enabled by default, but must be
enabled with LLVM_USE_PERF=yes. Given that the listener has no
dependencies, it might be sensible to enable by default once the
initial issues have been shaken out.
I followed existing precedent in registering the listener by default
in lli. Should there be a decision to enable this by default on linux,
that should probably be changed.
Please note that until https://reviews.llvm.org/D47343 is resolved,
using this functionality with mcjit rather than orcjit will not
reliably work.
Disregarding the previous comment, here's an example:
$ cat /tmp/expensive_loop.c
bool stupid_isprime(uint64_t num)
{
if (num == 2)
return true;
if (num < 1 || num % 2 == 0)
return false;
for(uint64_t i = 3; i < num / 2; i+= 2) {
if (num % i == 0)
return false;
}
return true;
}
int main(int argc, char **argv)
{
int numprimes = 0;
for (uint64_t num = argc; num < 100000; num++)
{
if (stupid_isprime(num))
numprimes++;
}
return numprimes;
}
$ clang -ggdb -S -c -emit-llvm /tmp/expensive_loop.c -o
/tmp/expensive_loop.ll
$ perf record -o perf.data -g -k 1 ./bin/lli -jit-kind=mcjit /tmp/expensive_loop.ll 1
$ perf inject --jit -i perf.data -o perf.jit.data
$ perf report -i perf.jit.data
- 92.59% lli jitted-5881-2.so [.] stupid_isprime
stupid_isprime
main
llvm::MCJIT::runFunction
llvm::ExecutionEngine::runFunctionAsMain
main
__libc_start_main
0x4bf6258d4c544155
+ 0.85% lli ld-2.27.so [.] do_lookup_x
And line-level annotations also work:
│ for(uint64_t i = 3; i < num / 2; i+= 2) {
│1 30: movq $0x3,-0x18(%rbp)
0.03 │1 38: mov -0x18(%rbp),%rax
0.03 │ mov -0x10(%rbp),%rcx
│ shr $0x1,%rcx
3.63 │ ┌──cmp %rcx,%rax
│ ├──jae 6f
│ │ if (num % i == 0)
0.03 │ │ mov -0x10(%rbp),%rax
│ │ xor %edx,%edx
89.00 │ │ divq -0x18(%rbp)
│ │ cmp $0x0,%rdx
0.22 │ │↓ jne 5f
│ │ return false;
│ │ movb $0x0,-0x1(%rbp)
│ │↓ jmp 73
│ │ }
3.22 │1 5f:│↓ jmp 61
│ │ for(uint64_t i = 3; i < num / 2; i+= 2) {
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D44892
llvm-svn: 337789
This is a new modernized VS integration installer. It adds a
Visual Studio .sln file which, when built, outputs a VSIX that can
be used to install ourselves as a "real" Visual Studio Extension.
We can even upload this extension to the visual studio marketplace.
This fixes a longstanding problem where we didn't support installing
into VS 2017 and higher. In addition to supporting VS 2017, due
to the way this is written we now longer need to do anything special
to support future versions of VS as well. Everything should
"just work". This also fixes several bugs with our old integration,
such as MSBuild triggering full rebuilds when /Zi was used.
Finally, we add a new UI page called "LLVM" which becomes visible
when the LLVM toolchain is selected. For now this only contains
one option which is the path to clang-cl.exe, but in the future
we can add more things here.
Differential Revision: https://reviews.llvm.org/D42762
llvm-svn: 337572
Automatically codesign all executables and dynamic libraries if a
codesigning identity is given (via LLVM_CODESIGNING_IDENTITY). This
option is darwin only for now.
Also update platforms/iOS.cmake to pick up the right versions of
codesign and codesign_allocate.
llvm-svn: 336708
This change adds a support for multiarch style runtimes layout, so in
addition to the existing layout where runtimes get installed to:
lib/clang/$version/lib/$os
Clang now allows runtimes to be installed to:
lib/clang/$version/$target/lib
This also includes libc++, libc++abi and libunwind; today those are
assumed to be in Clang library directory built for host, with the
new layout it is possible to install libc++, libc++abi and libunwind
into the runtime directory built for different targets.
The use of new layout is enabled by setting the
LLVM_ENABLE_RUNTIME_TARGET_DIR CMake variable and is supported by both
projects and runtimes layouts. The runtimes CMake build has been further
modified to use the new layout when building runtimes for multiple
targets.
Differential Revision: https://reviews.llvm.org/D45604
llvm-svn: 335809
This reverts commit r334543.
My understanding is, that commit is intended to make the llvm-build
invocation have a correct "--enable-optional-components" value, but:
- it already has a value: it's quoted in the command line a few lines
below, and, if I hack llvm-build to print sys.argv, it does look correct:
-- llvm-build output: ['.../utils/llvm-build/llvm-build',
'--native-target', 'X86', '--enable-targets', 'X86;ARM;AArch64',
'--enable-optional-components', '',
'--write-library-table',
'.../build/tools/llvm-config/LibraryDependencies.inc',
'--write-cmake-fragment', '.../build/LLVMBuild.cmake']
- the " " string seems to evaluate to TRUE in CMake (*sigh*), so this
basically force-enables LLVM_USE_INTEL_JITEVENTS, regardless of the
value of the option.
On Darwin, JITEvents is not supported, so this bypasses that OS check
but is guaranteed to fail later.
llvm-svn: 334566
Patch by Force.Charlie-I
If LLVM_USE_INTEL_JITEVENTS and LLVM_USE_OPROFILE not set,
"${LLVMOPTIONALCOMPONENTS}" is empty, but
**--enable-optional-components** need arg, Cause
**--write-library-table** to be skipped parsed.
Differential Revision: https://reviews.llvm.org/D47982
llvm-svn: 334543
This dependency was accidentally dropped in r319480, causing
install-distribution and install-llvm-headers to install an incomplete
set of headers (the generated Intrinsics and Attributes would be
missing).
llvm-svn: 334452
Summary:
This patch adds a new internal variable
LLVM_RUNTIME_DISTRIBUTION_COMPONENTS which specifies distribution
components that are part of runtime projects, and thus should be exposed
from runtime configuraitons up into the top-level CMake configurations.
This is required for allowing runtime components to be included in
LLVM_DISTRIBUTION_COMPONENTS because we verify that the build and
install targets exist for every component specified for the
distribution.
Without this patch runtimes and builtins can only be included in
distributions in whole, not by component.
Reviewers: phosek
Reviewed By: phosek
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D46705
llvm-svn: 332631
This behavior has been the default for a long time, so the default value is On, however this can make it difficult to debug sanitizer failures, so we should have an option to turn it off.
llvm-svn: 332628
It used to symlink dsymutil to llvm-dsymutil, but after r327790 llvm's dsymutil
binary is now called dsymutil without prefix.
r327792 then reversed the direction of the symlink if
LLVM_INSTALL_CCTOOLS_SYMLINKS was set, but that looks like a buildfix and not
like something anyone should need.
https://reviews.llvm.org/D45966
llvm-svn: 330727
These should exist in all toolchains LLVM supports nowadays.
Enables making DataTypes.h a regular header instead of a .h.cmake file and
allows deleting a bunch of cmake goop (which should also speed up cmake
configure time a bit).
All the code this removes is 9+ years old.
https://reviews.llvm.org/D45155
llvm-svn: 328970
Compiler.h is used by Demangle (which Support depends on) - so sink it
into Demangle to avoid a circular dependency
DataTypes.h is used by llvm-c (which Support depends on) - so sink it
into llvm-c.
DataTypes.h could probably be fixed the other way - making llvm-c depend
on Support instead of Support depending on llvm-c - if anyone feels
that's the better option, happy to work with them on that.
I /think/ this'll address the layering issues that previous attempts to
commit this have triggered in the Modules buildbot, but I haven't been
able to reproduce that build so can't say for sure. If anyone's having
trouble with this - it might be worth taking a look to see if there's a
quick fix/something small I missed rather than revert, but no worries.
llvm-svn: 328123
Support depends on llvm-c (a few typedefs, macros, etc - Types.h,
Disassembler.h, and TargetMachine.h.
This could be done the other way - those macros/typedefs/etc could be
moved into Support and used from llvm-c instead. If someone feels that's
a better direction to go, happy to discuss it/try it out/etc.
llvm-svn: 328065
Add a `LLVM_INSTALL_CCTOOLS_SYMLINKS` to mirror
`LLVM_INSTALL_BINUTILS_SYMLINKS`. For now, this allows us to create
symlinks for `dsymutil` to `llvm-dsymutil`. This option is off by
default, but the user can enable it.
llvm-svn: 326381
It looks like this hasn't been updated since bugzilla moved.
Patch by Colden Cullen.
Differential Revision: https://reviews.llvm.org/D42496
llvm-svn: 323457
Set cmake policy CMP0068=NEW, if available, and set
"CMAKE_BUILD_WITH_INSTALL_NAME_DIR=On" globally to
maintain current behavior.
This is needed to suppress warnings on OSX starting with cmake version
3.9.6.
Differential Revision: https://reviews.llvm.org/D42463
llvm-svn: 323404
Summary:
Update this error message indicate this test only ensures experimental
targets were passed via LLVM_EXPERIMENTAL_TARGETS_TO_BUILD.
Originally, this test validated all targets, but in r184923, it was moved
after the LLVMBUILDTOOL test, which also validates all targets, making
that part of the test redundant.
Differential Revision: https://reviews.llvm.org/D41273
llvm-svn: 321012
Newer versions of CMake (I'm on 3.10, but I believe 3.9 behaves the same
way) attempt to query the system for information about the VS 2017
install. Unfortunately, this query fails on non-Windows systems:
cmake_host_system_information does not recognize <key> VS_15_DIR
CMake isn't going to find these system libraries on non-Windows anyway
(and we were previously silencing the resultant warnings in our
cross-compilation toolchain), so it makes sense to just omit the
attempted installation entirely on non-Windows.
Differential Revision: https://reviews.llvm.org/D41220
llvm-svn: 320724
This is identical to the install-distribution target, except that it
strips the installed binaries.
Differential Revision: https://reviews.llvm.org/D40689
llvm-svn: 320184
Summary: Make LLVM_ENABLE_DUMP independent LLVM_ENABLE_ASSERTIONS,
move it to llvm-config.h, and update description.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 320111
CMake's generated installation scripts support `CMAKE_INSTALL_DO_STRIP`
to enable stripping the installed binaries. LLVM's build system doesn't
expose this option to the `install-` targets, but it's useful in
conjunction with `install-distribution`.
Add a new function to create the install targets, which creates both the
regular install target and a second install target that strips during
installation. Change the creation of all installation targets to use
this new function. Stripping doesn't make a whole lot of sense for some
installation targets (e.g. the LLVM headers), but consistency doesn't
hurt.
I'll make other repositories (e.g. clang, compiler-rt) use this in a
follow-up, and then add an `install-distribution-stripped` target to
actually accomplish the end goal of creating a stripped distribution. I
don't want to do that step yet because the creation of that target would
depend on the presence of the `install-*-stripped` target for each
distribution component, and the distribution components from other
repositories will be missing that target right now.
Differential Revision: https://reviews.llvm.org/D40620
llvm-svn: 319480
This is still breaking greendragon.
At this point I give up until someone can fix the greendragon
bots, and I will probably abandon this effort in favor of using
a private github repository.
llvm-svn: 318722
This was reverted due to the tests being run twice on some
build bots. Each run had a slightly different configuration
due to the way in which it was being invoked. This fixes
the problem (albeit in a somewhat hacky way). Hopefully in
the future we can get rid of the workflow of running
debuginfo-tests as part of clang, and then this hack can
go away.
llvm-svn: 318697
This is still broken because it causes certain tests to be
run twice with slightly different configurations, which is
wrong in some cases.
You can observe this by running:
ninja -nv check-all | grep debuginfo-tests
And seeing that it passes clang/test and clang/test/debuginfo-tests
to lit, which causes it to run debuginfo-tests twice. The fix is
going to involve either:
a) figuring out that we're running in this "deprecated" configuration,
and then deleting the clang/test/debuginfo-tests path, which should
cause it to behave identically to before, or:
b) make lit smart enough that it doesn't descend into a sub-suite if
that sub-suite already has a lit.cfg file.
llvm-svn: 318486
This was reverted due to some failures on specific darwin buildbots,
the issue being that the new lit configuration was not setting the
SDKROOT environment variable. We've tested a fix locally and confirmed
that it works, so this patch resubmits everything with the fix
applied.
llvm-svn: 318435
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
In addition to the current ON and OFF options, this adds the FORCE_ON
option, which causes a configuration error if libxml2 cannot be used.
Differential revision: https://reviews.llvm.org/D40050
llvm-svn: 318209
This reverts the aforementioned patch and 2 subsequent follow-ups,
as some buildbots are still failing 2 tests because of it.
Investigation is ongoing into the cause of the failures.
llvm-svn: 318112
Previously, debuginfo-tests was expected to be checked out into
clang/test and then the tests would automatically run as part of
check-clang. This is not a standard workflow for handling
external projects, and it brings with it some serious drawbacks
such as the inability to depend on things other than clang, which
we will need going forward.
The goal of this patch is to migrate towards a more standard
workflow. To ease the transition for build bot maintainers,
this patch tries not to break the existing workflow, but instead
simply deprecate it to give maintainers a chance to update
the build infrastructure.
Differential Revision: https://reviews.llvm.org/D39605
llvm-svn: 317925
The LLVM tools can be used as a replacement for binutils, in which case
it's convenient to create symlinks with the binutils names. Add support
for these symlinks in the build system. As with any other llvm tool
symlinks, the user can limit the installed symlinks by only adding the
desired ones to `LLVM_TOOLCHAIN_TOOLS`.
Differential Revision: https://reviews.llvm.org/D39530
llvm-svn: 317272
LLVM now requires a minimum of cmake 3.4.3, and all the policies
currently being set are present in that cmake version, so the
conditionals will always be true and are therefore unnecessary. The
movation is that the conditionals can give the false impression that the
policy settings are optional, whereas for example it's necessary to set
CMP0056 in order for `check_linker_flags` to operate correctly after
r316972. Inline the project version and language setting in the process.
Differential Revision: https://reviews.llvm.org/D39442
llvm-svn: 317264
It's possible for multiple distribution components to have missing
targets, and it's a lot more convenient to get all those errors in one
shot rather than having to fix them individually.
llvm-svn: 317148
`check_linker_flags` currently sets the *compiler* flags (via
`CMAKE_REQUIRED_FLAGS`), and thus implicitly relies on cmake's default
behavior of passing the compiler flags to the linker. This breaks when
cmake's build rules have been altered to not pollute the link line with
compiler flags (which can be desirable for build cleanliness). Instead,
set `CMAKE_EXE_LINKER_FLAGS` explicitly and use `CMP0056` to ensure the
linker flags are passed along. Additionally, since we're inside a
function, we can just alter the variable directly (as the alteration
will be limited to the scope of the function) rather than saving and
restoring the old value.
Differential Revision: https://reviews.llvm.org/D39431
llvm-svn: 316972
LLVM checks if it is performing an in-source build and then stop the
build. However, this check is also triggered if LLVM is being build as
part of a parent project, which prevents the parent project itself from
using in-source builds. For example, CMake allows a parent project to
specify the output of its subproject:
add_subdirectory(llvm llvm_build)
This tells CMake to conduct an out-tree build of LLVM, which without
this patch will still fails because what is being tested is the parent
project, not LLVM. This is fixed by using the "CURRENT" variable, which
is only concerned by the CMakeLists that is actually bein processed at
the moment.
Tests:
Ran `make check-llvm`.
Patch by Henrique Jung <henriquenj_AT_gmail_DOT_com>
llvm-svn: 316142
We add /usr/local/include to the include directory list for some BSD
systems. We should mark this as a system directory to avoid files from
/usr/local/include getting picked over files shipping with llvm.
This typically manifested as gtest headers installed with the system
getting picked over the ones shipping with llvm.
Patch by Petr Penzin <penzin.dev@gmail.com>
Differential Revision: https://reviews.llvm.org/D37415
llvm-svn: 315952
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
