In MLIR, it is common for automatically generated headers to be included
in many places. To avoid tracking these dependencies explicitly in
cmake, they are treated as part of a library which 'owns' the generated
header. Users of the generated header link against the owning library.
However, object libraries don't actually 'link', so this dependence gets
lost. This patch adds an explicit dependence for these generated headers
when creating object library targets to ensure that generated headers
are appropriately generated
Differential Revision: https://reviews.llvm.org/D79241
Summary:
Remove invalid usage of VectorType::getNumElements in
ShuffleVectorInst::isValidOperands identified by test case
llvm::Analysis/ConstantFolding/vscale-shufflevector.ll. The tested
conditions hold for both fixed width and scalable vectors; use
getElementCount().
Reviewers: efriedma, sdesmalen, c-rhodes, spatel
Reviewed By: sdesmalen
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79212
We allocated a suitably aligned frame index so we know that all the values
have ABI alignment.
For MIPS this avoids using pair of lwl + lwr instructions instead of a
single lw. I found this when compiling CHERI pure capability code where
we can't use the lwl/lwr unaligned loads/stores and and were to falling
back to a byte load + shift + or sequence.
This should save a few instructions for MIPS and possibly other backends
that don't have fast unaligned loads/stores.
It also improves code generation for CodeGen/X86/pr34653.ll and
CodeGen/WebAssembly/offset.ll since they can now use aligned loads.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D78999
SelectionDAGBuilder currently doesn't propagate the known alignment of
the sret parameter. This is inefficient for MIPS and highly inefficient for
our out-of-tree CHERI-extended MIPS since we don't have lwl/lwr so fall back
to byte loads for align == 1.
Summary: This change enables all kind of carry out ISD opcodes to be selected according to the node divergence.
Reviewers: rampitec, arsenm, vpykhtin
Reviewed By: rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78091
Summary:
This patch adds AArch64ISD nodes for [S|U]MIN_PRED
and [S|U]MAX_PRED, and lowers both SVE intrinsics and
IR operations for min and max to these nodes.
There are two forms of these instructions for SVE: a predicated
form and an immediate (unpredicated) form. The patterns
which existed for the latter have been updated to match a
predicated node with an immediate and map this
to the immediate instruction.
Reviewers: sdesmalen, efriedma, dancgr, rengolin
Reviewed By: efriedma
Subscribers: huihuiz, tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79087
optimizePow does not create any new calls to pow, so it should work
regardless of whether the pow library function is available. This allows
it to optimize the llvm.pow intrinsic on targets with no math library.
Based on a patch by Tim Renouf.
Differential Revision: https://reviews.llvm.org/D68231
This addresses:
-Clean up the source code
-Refactor the JSON fields
-Fix the test cases
-Improve the docs for the stats output
Differential Revision: https://reviews.llvm.org/D77789
We haven't promoted AND/OR/XOR to vXi64 types for a while. So
there's no reason to use isOperationLegalOrPromote. So we can
just use isOperationLegal by merging with ADD handling.
Default legalization will create two v8i64 truncs to v8i32, concat
them to v16i32, and then truncate the rest of the way to v16i8.
Instead we can truncate directly from v8i64 to v8i8 in the lower
half of an xmm. Then concat the two halves to use vpunpcklqdq.
This is the same number of uops, but the dependency chain through
the uops is better since the halves are merged at the end.
I had to had SimplifyDemandedBits support for VTRUNC to prevent
a regression on vector-trunc-math.ll. combineTruncatedArithmetic
no longer gets a chance to shrink vXi64 mul so we were producing
the v8i64 multiply sequence using multiple PMULUDQs. With the
demanded bits fix we are able to prune out the extra ops leaving
just two PMULUDQs, one for each v8i64 half. This is twice the
width of the 2 v8i32 PMULLDs we had before, but PMULUDQ is 1
uop and PMULLD is 2. We also save some truncates. It's probably
worth using PMULUDQ even when PMULLQ is available since the latter
is 3 uops, but that will require a different change.
Differential Revision: https://reviews.llvm.org/D79231
To avoid undefined behavior caught by -fsanitize=undefined on binary-paddr.test
void SectionWriter::visit(const Section &Sec) {
if (Sec.Type != SHT_NOBITS)
// Sec.Contents is empty while Sec.Offset may be out of bound
llvm::copy(Sec.Contents, Out.getBufferStart() + Sec.Offset);
}
Before we eagerly put dependences into the QueryMap as soon as we
encountered them (via `Attributor::getAAFor<>` or
`Attributor::recordDependence`). Now we will wait to see if the
dependence is useful, that is if the target is not already in a fixpoint
state at the end of the update. If so, there is no need to record the
dependence at all.
Due to the abstraction via `Attributor::updateAA` we will now also treat
the very first update (during attribute creation) as we do subsequent
updates.
Finally this resolves the problematic usage of QueriedNonFixAA.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 554675 (389245/s)
temporary memory allocations: 101574 (71280/s)
peak heap memory consumption: 28.46MB
peak RSS (including heaptrack overhead): 116.26MB
total memory leaked: 269.10KB
```
After:
```
calls to allocation functions: 512465 (345559/s)
temporary memory allocations: 98832 (66643/s)
peak heap memory consumption: 22.54MB
peak RSS (including heaptrack overhead): 106.58MB
total memory leaked: 269.10KB
```
Difference:
```
calls to allocation functions: -42210 (-727758/s)
temporary memory allocations: -2742 (-47275/s)
peak heap memory consumption: -5.92MB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
```
Attributes that only depend on the value (=bit pattern) can be
initialized from uses in the must-be-executed-context (MBEC). We did use
`AAComposeTwoGenericDeduction` and `AAFromMustBeExecutedContext` before
to do this for some positions of these attributes but not for all. This
was fairly complicated and also problematic as we did run it in every
`updateImpl` call even though we only use known information. The new
implementation removes `AAComposeTwoGenericDeduction`* and
`AAFromMustBeExecutedContext` in favor of a simple interface
`AddInformation::fromMBEContext(...)` which we call from the
`initialize` methods of the "value attribute" `Impl` classes, e.g.
`AANonNullImpl:initialize`.
There can be two types of test changes:
1) Artifacts were we miss some information that was known before a
global fixpoint was reached and therefore available in an update
but not at the beginning.
2) Deduction for values we did not derive via the MBEC before or which
were not found as the `AAFromMustBeExecutedContext::updateImpl` was
never invoked.
* An improved version of AAComposeTwoGenericDeduction can be found in
D78718. Once we find a new use case that implementation will be able
to handle "generic" AAs better.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 468428 (328952/s)
temporary memory allocations: 77480 (54410/s)
peak heap memory consumption: 32.71MB
peak RSS (including heaptrack overhead): 122.46MB
total memory leaked: 269.10KB
```
After:
```
calls to allocation functions: 554720 (351310/s)
temporary memory allocations: 101650 (64376/s)
peak heap memory consumption: 28.46MB
peak RSS (including heaptrack overhead): 116.75MB
total memory leaked: 269.10KB
```
Difference:
```
calls to allocation functions: 86292 (556722/s)
temporary memory allocations: 24170 (155935/s)
peak heap memory consumption: -4.25MB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
```
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D78719
If SimplifyInstruction() does not succeed in simplifying the
instruction, it will compute the known bits of the instruction
in the hope that all bits are known and the instruction can be
folded to a constant. I have removed a similar optimization
from InstCombine in D75801, and would like to drop this one as well.
On average, we spend ~1% of total compile-time performing this
known bits calculation. However, if we introduce some additional
statistics for known bits computations and how many of them succeed
in simplifying the instruction we get (on test-suite):
instsimplify.NumKnownBits: 216
instsimplify.NumKnownBitsComputed: 13828375
valuetracking.NumKnownBitsComputed: 45860806
Out of ~14M known bits calculations (accounting for approximately
one third of all known bits calculations), only 0.0015% succeed in
producing a constant. Those cases where we do succeed to compute
all known bits will get folded by other passes like InstCombine
later. On test-suite, only lencod.test and GCC-C-execute-pr44858.test
show a hash difference after this change. On lencod we see an
improvement (a loop phi is optimized away), on the GCC torture
test a regression (a function return value is determined only
after IPSCCP, preventing propagation from a noinline function.)
There are various regressions in InstSimplify tests. However, all
of these cases are already handled by InstCombine, and corresponding
tests have already been added there.
Differential Revision: https://reviews.llvm.org/D79294
Summary:
This factors cost and reporting out of the inlining workflow, thus
making it easier to reuse when driving inlining from the upcoming
InliningAdvisor.
Depends on: D79215
Reviewers: davidxl, echristo
Subscribers: eraman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79275
Since every AbstractAttribute so far, and for the foreseeable future,
corresponds to a single IRPosition we can simplify the class structure.
We already did this for IRAttribute but there is no reason to stop
there.
This reverts commit 53913a65b408ade2956061b4c0aaed6bba907403.
Breaks VFSFromYAMLTest.DirectoryIterationSameDirMultipleEntries
in SupportTests on non-Windows.
LLD calls this on every source file string in every object file when
writing PDBs, so it is somewhat hot.
Avoid rewriting paths that do not contain path traversal components
(./..). Use find_first_not_of(separators) directly instead of using the
path iterators. The path component iterators appear to be slow, and
directly searching for slashes makes it easier to find double separators
that need to be canonicalized.
I discovered that the VFS relies on remote_dots to not canonicalize
early slashes (/foo or C:/foo) on Windows, so I had to leave that
behavior behind with unit tests for it. This is undesirable, but I claim
that my change is NFC.
Summary:
Current implementation of DWARFDie::getName(DINameKind Kind) could
lead to double call to DWARFDie::find(DW_AT_name) in following
scenario:
getName(LinkageName);
getName(ShortName);
getName(LinkageName) calls find(DW_AT_name) if linkage name is not
found. Then, it is called again in getName(ShortName). This patch
alows to request LinkageName and ShortName separately
to avoid extra call to find(DW_AT_name).
It helps D74169 to parse clang debuginfo faster(~1%).
Reviewers: clayborg, dblaikie
Differential Revision: https://reviews.llvm.org/D79173
The splitVector helper uses extractSubVector which splits build vectors like we do here, so avoid reimplementing it.
splitVector could easily be extended to peek through bitcasts as well but I'd prefer to keep this commit NFC.
The number of public symbols is very large, and each deserialization
does a few heap allocations. The public symbols are serialized by the
linker, so we can assume they have the expected layout and use it
directly.
Saves O(#publics) temporary heap allocations and shrinks some data
structures.
Don't use $noreg for instructions that take register inputs.
Only allow $noreg for parts of memory operands.
Don't use index register with $rip base.
Use RETQ instead of the RET pseudo. This pass is after the
ExpandPseudo pass that converts RET to RETQ.
