The idea of deferred spilling is to delay the insertion of spill code until the
very end of the allocation. A "candidate" to spill variable might not required
to be spilled because of other evictions that happened after this decision was
taken. The spirit is similar to the optimistic coloring strategy implemented in
Preston and Briggs graph coloring algorithm.
For now, this feature is highly experimental. Although correct, it would require
much more modification to properly model the effect of spilling.
Anyway, this early patch helps prototyping this feature.
Note: The test case cannot unfortunately be reduced and is probably fragile.
llvm-svn: 242585
This commit modifies the machine instruction lexer so that it now accepts the
'$' characters in identifier tokens.
This change makes the syntax for unquoted global value tokens consistent with
the syntax for the global idenfitier tokens in the LLVM's assembly language.
llvm-svn: 242584
This is mainly for the benefit of GlobalMerge, so that an alias into a
MergedGlobals variable has the same size as the original non-merged
variable.
Differential Revision: http://reviews.llvm.org/D10837
llvm-svn: 242520
llvm.eh.sjlj.setjmp was used as part of the SjLj exception handling
style but is also used in clang to implement __builtin_setjmp. The ARM
backend needs to output additional dispatch tables for the SjLj
exception handling style, these tables however can't be emitted if
llvm.eh.sjlj.setjmp is simply used for __builtin_setjmp and no actual
landing pad blocks exist.
To solve this issue a new llvm.eh.sjlj.setup_dispatch intrinsic is
introduced which is used instead of llvm.eh.sjlj.setjmp in the SjLj
exception handling lowering, so we can differentiate between the case
where we actually need to setup a dispatch table and the case where we
just need the __builtin_setjmp semantic.
Differential Revision: http://reviews.llvm.org/D9313
llvm-svn: 242481
Empty subranges are not allowed in a LiveInterval and must be removed
instead: Check this in the verifiers, put a reminder for this in the
comment of the shrinkToUses variant for a single lane and make it
automatic for the shrinkToUses variant for a LiveInterval.
llvm-svn: 242431
The benefit of turning the parameter of LoopInfo::analyze() to const& is that it now can accept a rvalue.
http://reviews.llvm.org/D11250
llvm-svn: 242426
This adds new intrinsics "*absdiff" for absolute difference ops to facilitate efficient code generation for "sum of absolute differences" operation.
The patch also contains the introduction of corresponding SDNodes and basic legalization support.Sanity of the generated code is tested on X86.
This is 1st of the three patches.
Patch by Shahid Asghar-ahmad!
llvm-svn: 242409
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
This patch is quite boring overall, except for some uglyness in
ASMPrinter which has a getDataLayout function but has some clients
that use it without a Module (llmv-dsymutil, llvm-dwarfdump), so
some methods are taking a DataLayout as parameter.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11090
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 242386
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11079
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 242385
Summary:
Because llvm-dsymutil is using ASMPrinter without any MachineFunction
of Module available.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11078
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 242384
The jump table info is serialized using a YAML mapping that contains its kind
and a YAML sequence of jump table entries. A jump table entry is a YAML mapping
that has an ID and an inline YAML sequence of machine basic block references.
The testcase 'CodeGen/MIR/X86/jump-table-info.mir' doesn't have any instructions
because one of them contains a jump table index operand. The jump table index
operands will be serialized in a follow up patch, and the appropriate
instructions will be added to this testcase.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 242357
This new wrapper pass is useful when we want to do branch probability analysis conditionally (e.g. only in PGO mode) but don't want to add one more pass dependence.
http://reviews.llvm.org/D11241
llvm-svn: 242349
Pass a const reference to LiveRegMatrix to getRegAllocationHints()
because some targets can prodive better hints if they can test whether a
physreg has been used for register allocation yet.
llvm-svn: 242340
This commit serializes the references to the named LLVM alloca instructions from
the stack objects in the machine frame info. This commit adds a field 'Name' to
the struct 'yaml::MachineStackObject'. This new field is used to store the name
of the alloca instruction when the alloca is present and when it has a name.
llvm-svn: 242339
emit debug info, according to the preferences of the different
debuggers used on various targets.
Darwin and FreeBSD default to tuning for LLDB; PS4 defaults to tuning for
the SCE (Sony Computer Entertainment) debugger. All others default to GDB.
Differential Revision: http://reviews.llvm.org/D8506
llvm-svn: 242338
This is a necessary prerequisite for bootstrapping the emission
of debug info inside modules.
- Adds a FlagExternalTypeRef to DICompositeType.
External types must have a unique identifier.
- External type references are emitted using a forward declaration
with a DW_AT_signature([DW_FORM_ref_sig8]) based on the UID.
http://reviews.llvm.org/D9612
llvm-svn: 242302
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
llvm-svn: 242295
- Create a new CopyRewriter for Uncoalescable copy-like instructions
- Change the ValueTracker to return a ValueTrackerResult
This makes optimizeUncoalescable looks more like optimizeCoalescable and
use the CopyRewritter infrastructure.
This is also the preparation for looking up into PHI nodes in the
ValueTracker.
Differential Revision: http://reviews.llvm.org/D11195
llvm-svn: 242294
Current implementation handles unordered comparison poorly in soft-float mode.
Consider (a ULE b) which is a <= b. It is lowered to (ledf2(a, b) <= 0 || unorddf2(a, b) != 0) (in general). We can do better job by lowering it to (__gtdf2(a, b) <= 0).
Such replacement is true for other CMP's (ult, ugt, uge). In general, we just call same function as for ordered case but negate comparison against zero.
Differential Revision: http://reviews.llvm.org/D10804
llvm-svn: 242280
MachineCombiner predicated its use of scheduling-based metrics on
hasInstrSchedModel(), but useful conclusions can be drawn from pipeline
itineraries as well. Almost all of the logic (except for resource tracking in
preservesResourceLen) can be used if we have an itinerary, so enable it in that
case as well.
This will be used by the PowerPC backend in an upcoming commit.
llvm-svn: 242277
The unsigned opcode argument here was the result of BinaryOperator->getOpcode().
That returns a BinaryOps enum which is more accurate than passing around an
unsigned.
llvm-svn: 242265
This code was checking if we are an ICmpInst or FCmpInst then throwing
unreachable if we are neither. We must be one or the other, so use a
cast on the FCmpInst case to ensure that we are that case. Then we can
avoid having an unreachable but still catch an error if we ever had another
subclass of CmpInst.
llvm-svn: 242264
The calls here were both to getStoreSizeInBits() which multiplies by 8.
We then immediately divided by 8. Calling getStoreSize() returns the
values we need without the extra arithmetic.
llvm-svn: 242254
SelectionDAG already had begin/end methods for iterating over all
the nodes, but didn't define an iterator_range for us in foreach
loops.
This adds such a method and uses it in some of the eligible places
throughout the backends.
llvm-svn: 242212
The simplify_type specialisation allows us to cast directly from
SDValue to an SDNode* subclass so we don't need to pass a SDNode*
to cast<>.
llvm-svn: 242209
This commit moves the function 'printReg' towards the start of the file so that
it can be used by the conversion methods in MIRPrinter and not just the printing
methods in MIPrinter.
llvm-svn: 242203
Summary:
Before this change, personality directives were not emitted
if there was no invoke left in the function (of course until
recently this also meant that we couldn't know what
the personality actually was). This patch forces personality directives
to still be emitted, unless it is known to be a noop in the absence of
invokes, or the user explicitly specified `nounwind` (and not
`uwtable`) on the function.
Reviewers: majnemer, rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D10884
llvm-svn: 242185
We have a detailed def/use lists for every physical register in
MachineRegisterInfo anyway, so there is little use in maintaining an
additional bitset of which ones are used.
Removing it frees us from extra book keeping. This simplifies
VirtRegMap.
Differential Revision: http://reviews.llvm.org/D10911
llvm-svn: 242173
Do not use MachineRegisterInfo::setPhysRegUsed()/isPhysRegUsed()
anymore. This bitset changes function-global state and is set by the
VirtRegRewriter anyway.
Simply use a bitvector private to RAGreedy.
Differential Revision: http://reviews.llvm.org/D10910
llvm-svn: 242169
This changes TargetFrameLowering::processFunctionBeforeCalleeSavedScan():
- Rename the function to determineCalleeSaves()
- Pass a bitset of callee saved registers by reference, thus avoiding
the function-global PhysRegUsed bitset in MachineRegisterInfo.
- Without PhysRegUsed the implementation is fine tuned to not save
physcial registers which are only read but never modified.
Related to rdar://21539507
Differential Revision: http://reviews.llvm.org/D10909
llvm-svn: 242165
- Factor out code to query and modify the sign bit of a floatingpoint
value as an integer. This also works if none of the targets integer
types is big enough to hold all bits of the floatingpoint value.
- Legalize FABS(x) as FCOPYSIGN(x, 0.0) if FCOPYSIGN is available,
otherwise perform bit manipulation on the sign bit. The previous code
used "x >u 0 ? x : -x" which is incorrect for x being -0.0! It also
takes 34 instructions on ARM Cortex-M4. With this patch we only
require 5:
vldr d0, LCPI0_0
vmov r2, r3, d0
lsrs r2, r3, #31
bfi r1, r2, #31, #1
bx lr
(This could be further improved if the compiler would recognize that
r2, r3 is zero).
- Only lower FCOPYSIGN(x, y) = sign(x) ? -FABS(x) : FABS(x) if FABS is
available otherwise perform bit manipulation on the sign bit.
- Perform the sign(x) test by masking out the sign bit and comparing
with 0 rather than shifting the sign bit to the highest position and
testing for "<s 0". For x86 copysignl (on 80bit values) this gets us:
testl $32768, %eax
rather than:
shlq $48, %rax
sets %al
testb %al, %al
llvm-svn: 242107
