This was storing the hash alongside the key so that the hash
doesn't need to be re-computed every time, but in doing so it
was allocating a structure to keep the key size small in the
DenseMap. This is a noble goal, but it also leads to a pointer
indirection on every probe, and this cost of this pointer
indirection ends up being higher than the cost of having a
slightly larger entry in the hash table. Removing this not only
simplifies the code, but yields a small but noticeable
performance improvement in the type merging algorithm.
llvm-svn: 319493
This class had some code that would automatically remap type
indices before hashing and serializing. The only caller of
this method was the TypeStreamMerger anyway, and the method
doesn't make general sense, and prevents making certain future
improvements to the class. So, factoring this up one level
into the TypeStreamMerger where it belongs.
llvm-svn: 319377
A couple of places in LLD were passing references to
TypeTableCollections around, which makes it hard to change the
implementation at runtime. However, these cases only needed to
iterate over the types in the collection, and TypeCollection
already provides a handy abstract interface for this purpose.
By implementing this interface, we can get rid of the need to
pass TypeTableBuilder references around, which should allow us
to swap the implementation at runtime in subsequent patches.
llvm-svn: 319345
The motivation behind this patch is that future directions require us to
be able to compute the hash value of records independently of actually
using them for de-duplication.
The current structure of TypeSerializer / TypeTableBuilder being a
single entry point that takes an unserialized type record, and then
hashes and de-duplicates it is not flexible enough to allow this.
At the same time, the existing TypeSerializer is already extremely
complex for this very reason -- it tries to be too many things. In
addition to serializing, hashing, and de-duplicating, ti also supports
splitting up field list records and adding continuations. All of this
functionality crammed into this one class makes it very complicated to
work with and hard to maintain.
To solve all of these problems, I've re-written everything from scratch
and split the functionality into separate pieces that can easily be
reused. The end result is that one class TypeSerializer is turned into 3
new classes SimpleTypeSerializer, ContinuationRecordBuilder, and
TypeTableBuilder, each of which in isolation is simple and
straightforward.
A quick summary of these new classes and their responsibilities are:
- SimpleTypeSerializer : Turns a non-FieldList leaf type into a series of
bytes. Does not do any hashing. Every time you call it, it will
re-serialize and return bytes again. The same instance can be re-used
over and over to avoid re-allocations, and in exchange for this
optimization the bytes returned by the serializer only live until the
caller attempts to serialize a new record.
- ContinuationRecordBuilder : Turns a FieldList-like record into a series
of fragments. Does not do any hashing. Like SimpleTypeSerializer,
returns references to privately owned bytes, so the storage is
invalidated as soon as the caller tries to re-use the instance. Works
equally well for LF_FIELDLIST as it does for LF_METHODLIST, solving a
long-standing theoretical limitation of the previous implementation.
- TypeTableBuilder : Accepts sequences of bytes that the user has already
serialized, and inserts them by de-duplicating with a hash table. For
the sake of convenience and efficiency, this class internally stores a
SimpleTypeSerializer so that it can accept unserialized records. The
same is not true of ContinuationRecordBuilder. The user is required to
create their own instance of ContinuationRecordBuilder.
Differential Revision: https://reviews.llvm.org/D40518
llvm-svn: 319198
The previous implementation would only look 1 DW_AT_specification or DW_AT_abstract_origin deep. This means DWARFDie::getName() would fail in certain cases. I ran into such a case while creating a tool that used the LLVM DWARF parser to generate a symbolication format so I have seen this in the wild.
Differential Revision: https://reviews.llvm.org/D40156
llvm-svn: 319104
The existing library assumed that a stream's length would never
change. This makes some things simpler, but it's not flexible
enough for what we need, especially for writable streams where
what you really want is for each call to write to actually append.
llvm-svn: 319070
DWARF4 relative DW_AT_high_pc values are now displayed as absolute
addresses. The relative value is only shown when explicitly dumping the
forms, i.e. in show-form or verbose mode.
```
DW_AT_low_pc (0x0000000000000049)
DW_AT_high_pc (0x00000019)
```
becomes
```
DW_AT_low_pc (0x0000000000000049)
DW_AT_high_pc (0x0000000000000062)
```
Differential revision: https://reviews.llvm.org/D40317
rdar://35416943
llvm-svn: 319044
As a side effect, the .debug_line section will be dumped in physical
order, rather than in the order that compile units refer to their
associated portions of the .debug_line section. These are probably
always the same order anyway, and no tests noticed the difference.
Differential Revision: https://reviews.llvm.org/D39854
llvm-svn: 318839
It turns out this #include isn't used from Host.h anyway,
but by having it it causes circular include dependencies.
This issues only surfaced while I was working on a separate
patch, so I'm submitting this first so that it's independent
of the other, unrelated patch.
llvm-svn: 318489
Initial changes to support debugging PE/COFF files with LLDB on Windows through DIA SDK.
There is another set of changes required on the LLDB side before this does anything.
Differential Revision: https://reviews.llvm.org/D39517
llvm-svn: 318403
Patch improves next things:
* Fixes assert/crash in getOpDesc when giving it a invalid expression op code.
* DWARFExpression::print() called DWARFExpression::Operation::getEndOffset() which
returned and used uninitialized field EndOffset. Patch fixes that.
* Teaches verifier to verify DW_AT_location and error out on broken expressions.
Differential revision: https://reviews.llvm.org/D39294
llvm-svn: 316756
Add the option to lookup an address in the debug information and print
out the file, function, block and line table details.
Differential revision: https://reviews.llvm.org/D38409
llvm-svn: 316619
This fixes possible out of bound access in
DWARFDie::getFirstChild()
which might happen when .debug_info section is corrupted,
like shown in testcase.
Differential revision: https://reviews.llvm.org/D39185
llvm-svn: 316566
The type index is from the TPI stream, not the IPI stream. Fix the
dumper, fix type index discovery, and add a test in LLD.
Also improve the log message we emit when we fail to rewrite type
indices in LLD. That's how I found this bug.
llvm-svn: 316461
This adds type index discovery and dumper support for symbol record kind
0x1168, which is a list of inlined function ids. This symbol kind is
undocumented, but S_INLINEES is consistent with the existing
nomenclature.
Fixes PR34222
llvm-svn: 316398
Currently llvm-dwarfdump runs into llvm_unreachable when
faces DW_CFA_GNU_args_size. Patch implements the support.
Differential revision: https://reviews.llvm.org/D38879
llvm-svn: 315897
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Recommit after being reverted in r315299.
Differential revision: https://reviews.llvm.org/D36993
llvm-svn: 315316
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Differential revision: https://reviews.llvm.org/D36993
llvm-svn: 315297
This patch adds two new verifiers:
- It checks that the root DIE of a CU is actually a valid unit DIE.
(based on its tag)
- For DWARF5 which contains a unit type int he CU header, it checks that
this matches the type of the unit DIE.
Differential revision: https://reviews.llvm.org/D38453
llvm-svn: 315121
The test fails on Linux; see follow-up email on the llvm-commits list.
> Add the option to lookup an address in the debug information and print
> out the file, function, block and line table details.
>
> Differential revision: https://reviews.llvm.org/D38409
This also reverts the follow-up r314818:
> [test] Fix llvm-dwarfdump/cmdline.test
>
> Fixes test/tools/llvm-dwarfdump/cmdline.test
llvm-svn: 314825
The list of register ids was previously written out in a couple of dirrent
places. This puts it in a .def file and also adds a few more registers (e.g.
the x87 regs) which should lead to more readable dumps, but I didn't include
the whole list since that seems unnecessary.
X86_MC::initLLVMToSEHAndCVRegMapping is pretty ugly, but at least it's not
relying on magic constants anymore. The TODO of using tablegen still stands.
Differential revision: https://reviews.llvm.org/D38480
llvm-svn: 314821
Add the option to lookup an address in the debug information and print
out the file, function, block and line table details.
Differential revision: https://reviews.llvm.org/D38409
llvm-svn: 314817
