Check that Machine CSE correctly handles during the transformation, the
debug location information for local variables.
Differential Revision: https://reviews.llvm.org/D50887
llvm-svn: 341025
If an ABI-like value is used in a different block,
the type split used is not necessarily the same as
the call's ABI. The value is used through an intermediate
copy virtual registers from the other block. This
resulted in copies with inconsistent sizes later.
Fixes regressions since r338197 when AMDGPU started
splitting vector types for calls.
llvm-svn: 341018
Summary:
Global variables that are external and zero initialized are
supposed to be merged with global variables in the bss section
rather than the data section.
Reviewers: efriedma, rengolin, t.p.northover, javed.absar, asl, john.brawn, pcc
Reviewed By: efriedma
Subscribers: dmgreen, llvm-commits
Differential Revision: https://reviews.llvm.org/D51379
llvm-svn: 341008
This should more accurately reflect what the AsmPrinter will actually
do.
This is NFC, as far as I can tell; all the places that might be affected
already have an extra check to avoid using the result of
getPreferredAlignment in this situation.
Differential Revision: https://reviews.llvm.org/D51377
llvm-svn: 340999
On AMDGPU we have 70 register classes, so iterating over all 70
each time and exiting is costly on the CPU, this flips the loop
around so that it loops over the 70 register classes first,
and exits without doing the inner loop if needed.
On my test just starting radv this takes
RegUsageInfoCollector::runOnMachineFunction
from 6.0% of total time to 2.7% of total time,
and reduces the startup from 2.24s to 2.19s
Patch by David Airlie!
Differential Revision: https://reviews.llvm.org/D48582
llvm-svn: 340993
Variables declared with the dllimport attribute are accessed via a
stub variable named __imp_<var>. In MinGW configurations, variables that
aren't declared with a dllimport attribute might still end up imported
from another DLL with runtime pseudo relocs.
For x86_64, this avoids the risk that the target is out of range
for a 32 bit PC relative reference, in case the target DLL is loaded
further than 4 GB from the reference. It also avoids having to make the
text section writable at runtime when doing the runtime fixups, which
makes it worthwhile to do for i386 as well.
Add stub variables for all dso local data references where a definition
of the variable isn't visible within the module, since the DLL data
autoimporting might make them imported even though they are marked as
dso local within LLVM.
Don't do this for variables that actually are defined within the same
module, since we then know for sure that it actually is dso local.
Don't do this for references to functions, since there's no need for
runtime pseudo relocations for autoimporting them; if a function from
a different DLL is called without the appropriate dllimport attribute,
the call just gets routed via a thunk instead.
GCC does something similar since 4.9 (when compiling with -mcmodel=medium
or large; from that version, medium is the default code model for x86_64
mingw), but only for x86_64.
Differential Revision: https://reviews.llvm.org/D51288
llvm-svn: 340942
I am experimenting with a single split dwarf (.dwo sections in .o files).
I want to make linker to ignore .dwo sections in .o, for that I am trying to add
SHF_EXCLUDE flag ("E") for them in my asm sample.
I found that currently, it is impossible to add any flag for debug sections using llvm-mc.
That happens because we have a set of predefined unique sections created early with default flags:
https://github.com/llvm-mirror/llvm/blob/master/lib/MC/MCObjectFileInfo.cpp#L391
This patch allows a user to add any flags he wants.
I had to edit TargetLoweringObjectFileImpl.cpp to set MetaData type for debug sections.
Their kind was Data by default (so they were allocatable) and so after changes introduced by
this patch the SHF_ALLOC flag was applied for them, what does not make sense for debug sections.
One of OrcJITTests tests failed because of that.
Differential revision: https://reviews.llvm.org/D51361
llvm-svn: 340904
Summary: This is split out from D41062 to cover the code in LegalVectorTypes.cpp
Reviewers: RKSimon, spatel, efriedma
Reviewed By: efriedma
Subscribers: sdardis, jvesely, nhaehnle, jrtc27, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D51337
llvm-svn: 340891
https://reviews.llvm.org/D51197
Currently, IRTranslator (and GISel) seems to be arbitrarily picking
which overflow intrinsics get mapped into opcodes which either have a
carry as an input or not.
For intrinsics such as Intrinsic::uadd_with_overflow, translate it to an
opcode (G_UADDO) which doesn't have any carry inputs (similar to LLVM
IR).
This patch adds 4 missing opcodes for completeness - G_UADDO, G_USUBO,
G_SSUBE and G_SADDE.
llvm-svn: 340865
Summary:
I'm not sure if this patch is correct or if it needs more qualifying somehow. Bitcast shouldn't change the size of the load so it should be ok? We already do something similar for stores. We'll change the type of a volatile store if the resulting store is Legal or Custom. I'm not sure we should be allowing Custom there...
I was playing around with converting X86 atomic loads/stores(except seq_cst) into regular volatile loads and stores during lowering. This would allow some special RMW isel patterns in X86InstrCompiler.td to be removed. But there's some floating point patterns in there that didn't work because we don't fold (f64 (bitconvert (i64 volatile load))) or (f32 (bitconvert (i32 volatile load))).
Reviewers: efriedma, atanasyan, arsenm
Reviewed By: efriedma
Subscribers: jvesely, arsenm, sdardis, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, arichardson, jrtc27, atanasyan, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50491
llvm-svn: 340797
This causes crashes due to the interleaved dbg.value intrinsics being
left at the end of basic blocks, causing the actual terminators (br,
etc) to be not where they should be (not at the end of the block),
leading to later crashes.
Further discussion on the original commit thread.
This reverts commit r340368.
llvm-svn: 340794
The code that generates the loop definition operand for phis
in the epilog and kernel is incorrect in some cases.
In the kernel, when a phi refers to another phi, the code that
updates PhiOp2 needs to include the stage difference between
the two phis.
In the epilog, the check for using the loop definition instead
of the phi definition uses the StageDiffAdj value (the difference
between the phi stage and the loop definition stage), but the
adjustment is not needed to determine if the current stage
contains an iteration with the loop definition.
Differential Revision: https://reviews.llvm.org/D51167
llvm-svn: 340782
If the liveness of a physical register was invalid, this
was attempting to iterate the subregisters of all register
uses of the instruction, which would assert when it
encountered an implicit virtual register operand.
llvm-svn: 340763
I noticed this along with the patterns in D51125, but when the index is variable,
we don't convert insertelement into a build_vector.
For x86, that means these get expanded at legalization time into the loading/spilling
code that we see in the tests. I think it's always better to avoid going to memory on
these, and we get the optimal 'broadcast' if it's available.
I suspect other targets may want to look at enabling the hook. AArch64 and AMDGPU have
regression tests that would be affected (although I did not check what would happen in
those cases). In the most basic cases shown here, AArch64 would probably do much
better with a splat.
Differential Revision: https://reviews.llvm.org/D51186
llvm-svn: 340705
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
llvm-svn: 340698
Summary:
Previously the value being stored is the last operand in SDNode. This causes the type legalizer to visit the mask operand before the value operand. The type legalizer was more complicated because of this since we want the type of the value to drive the decisions.
This patch moves the value to be the first operand so we visit it first during type legalization. It also simplifies the type legalization code accordingly.
X86 is currently the only in tree target that uses this SDNode. Not sure if there are any users out of tree.
Reviewers: RKSimon, delena, hfinkel, eli.friedman
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50402
llvm-svn: 340689
Summary:
If any of the bundled instructions are marked as FrameSetup
or FrameDestroy, then that property is set on the BUNDLE
instruction as well.
As long as the scheduler/packetizer aren't mixing
prologue/epilogue instructions (i.e. all the bundled
instructions have the same property) then this simply gives
the bundle the correct property (so when using a bundle
iterator in late passes a bundle will be correctly identified
as FrameSetup/FrameDestroy).
When for example bundling a mix of FrameSetup instructions
with non-FrameSetup instructions it could be discussed if
the bundle should have the property or not. The choice here
has been to set these properties on the BUNDLE instruction if
any of the bundled instructions have the property set.
Reviewers: #debug-info, kparzysz
Reviewed By: kparzysz
Subscribers: vsk, thegameg, llvm-commits
Differential Revision: https://reviews.llvm.org/D50637
llvm-svn: 340680
Summary:
When computeIntervals is looking through COPY instruction to
extend the location mapping for a debug variable it did not
handle subregisters correctly.
For example
DBG_VALUE debug-use %0.sub_8bit_hi, ...
%1:gr16 = COPY %0
was transformed into
DBG_VALUE debug-use %0.sub_8bit_hi, ...
%1:gr16 = COPY %0
DBG_VALUE debug-use %1, ...
So the subregister index was missing in the added DBG_VALUE.
As long as the subreg refered to the least significant bits
of the superreg, then I guess we could get the correct
result in a debugger even when referring to the superreg.
But as in the example above when the subreg refers to other
parts of the superreg, then debuginfo would be incorrect.
I'm not sure exactly how to fix this properly, so this patch
just avoids looking through the COPY when there is a subreg
involved (for more info, see the FIXME added in the code).
Reviewers: rnk, aprantl
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D50788
llvm-svn: 340679
Otherwise, the debug info is incorrect. On its own, this is mostly
harmless, but the safe-stack also later inlines the call to
__safestack_pointer_address, which leads to debug info with the wrong
scope, which eventually causes an assertion failure (and incorrect debug
info in release mode).
Differential Revision: https://reviews.llvm.org/D51075
llvm-svn: 340651
Firstly, require the symbol to be used within the module. If a
symbol is unused within a module, then by definition it cannot be
address-significant within that module. This condition is useful on all
platforms because it could make symbol tables smaller -- without this
change, emitting an address-significance table could cause otherwise
unused undefined symbols to be added to the object file.
But this change is necessary with COFF specifically in order to
preserve the property that an unreferenced undefined symbol in an IR
module does not result in a link failure. This is already the case for
ELF because ELF linkers only reject links with unresolved symbols if
there is a relocation to that symbol, but COFF linkers require all
undefined symbols to be resolved regardless of relocations. So if
a module contains an unreferenced undefined symbol, we need to make
sure not to add it to the address-significance table (and thus the
symbol table) in case it doesn't end up resolved at link time.
Secondly, do not add dllimport symbols to the table. These symbols
won't be able to be resolved because their definitions live in another
module and are accessed via the IAT, and the address-significance
table has no effect on other modules anyway. It wouldn't make sense
to add the IAT entry symbol to the address-significance table either
because the IAT entry isn't address-significant -- the generated code
never takes its address.
Differential Revision: https://reviews.llvm.org/D51199
llvm-svn: 340648
My previoust test case had skipped CUs from one TU out of a two-TU LTO
scenario, which meant the CU index wasn't needed (as it was unambiguous
which CU a table entry applied to) - expanding the test to use 3 TUs,
skipping one (so long as it's not the last one) shows the indexes are
miscomputed. Fix that with a little indirection for the index.
llvm-svn: 340646
Previously we allowed the store to be Custom. But without knowing for sure that the Custom handling won't split the store, we shouldn't convert a volatile store. We also probably shouldn't be creating a store the requires custom handling after LegalizeOps. This could lead to an infinite loop if the custom handling was to insert a bitcast. Though I guess isStoreBitCastBeneficial could be used to block such a loop.
The test changes here are due to the volatile part of this. The stores in the test are all volatile and i32 stores are marked custom, So we are no longer converting them
This is related to D50491 where I was trying to allow some bitcasting of volatile loads
Differential Revision: https://reviews.llvm.org/D50578
llvm-svn: 340626
Having the KnownBits as an output parameter is kind of awkward to use
and a holdover from when it was two separate APInts. Instead, just
return a KnownBits object.
I'm leaving the existing interface in place for now, since updating
the callers all at once would be thousands of lines of diff.
llvm-svn: 340594
Summary:
I got "Use not jointly dominated by defs" when removePartialRedundancy
attempted to prune then re-extend a subrange whose only liveness was a
dead def at the copy being removed.
V2: Removed junk from test. Improved comment.
V3: Addressed minor review comments.
Subscribers: MatzeB, qcolombet, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D50914
Change-Id: I6f894e9f517f71e921e0c6d81d28c5f344db8dad
llvm-svn: 340549
This patch's test case relies on debug prints which isn't generally an
OK way to test stuff in LLVM and fails whenever asserts aren't enabled.
I've send a heads-up to the commit and detailed comments on the review.
llvm-svn: 340513
In lib/CodeGen/LiveDebugVariables.cpp, it uses std::prev(MBBI) to
get DebugValue's SlotIndex. However, the previous instruction may be
also a debug instruction. It could not use a debug instruction to query
SlotIndex in mi2iMap.
Scan all debug instructions and use the first debug instruction to query
SlotIndex for following debug instructions. Only handle DBG_VALUE in
handleDebugValue().
Differential Revision: https://reviews.llvm.org/D50621
llvm-svn: 340508
This solves the motivating case from:
https://bugs.llvm.org/show_bug.cgi?id=38527
If we are legalizing an FP vector op that maps to 1 of the LLVM intrinsics that mimic libm calls,
but we're going to end up with scalar libcalls for that vector type anyway, then we should unroll
the vector op into scalars before widening. This avoids libcalls because we've lost the knowledge
that some of the scalar elements are undef.
Differential Revision: https://reviews.llvm.org/D50791
llvm-svn: 340469
The inline sequence is very long (about 70 bytes on Thumb1), so it's
not really a good idea to inline it, especially when optimizing for
size.
Differential Revision: https://reviews.llvm.org/D47917
llvm-svn: 340458
Instead of asserting that the function doesn't have any unreachable
code, just ignore it for the purpose of computing liveness.
Differential Revision: https://reviews.llvm.org/D51070
llvm-svn: 340456
CodeGenPrepare has a strategy for moving dbg.values so that a value's
definition always dominates its debug users. This cleanup was happening
too early (before certain CGP transforms were run), resulting in some
dbg.value use-before-def errors.
Perform this cleanup as late as possible to avoid use-before-def.
llvm-svn: 340370
In optimizeSelectInst, when scanning for candidate selects to rewrite
into branches, scan past debug intrinsics. This makes the debug-enabled
and non-debug paths through optimizeSelectInst more congruent.
NFC because every select is eventually visited either way.
llvm-svn: 340368
Summary:
Computing the remaining latency can be very expensive especially
on graphs of N nodes where the number of edges approaches N^2.
This reduces the compile time of a pathological case with the
AMDGPU backend from ~7.5 seconds to ~3 seconds. This test case has
a basic block with 2655 stores, each with somewhere between 500
and 1500 successors and predecessors.
Reviewers: atrick, MatzeB, airlied, mareko
Reviewed By: mareko
Subscribers: tpr, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D50486
llvm-svn: 340346
Summary:
Catchpads and cleanuppads are not funclet entries; they are only EH
scope entries. We already dont't set `isEHFuncletEntry` for catchpads.
This patch does the same thing for cleanuppads.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50654
llvm-svn: 340330
Summary:
When RegisterCoalescer::reMaterializeTrivialDef is substituting
a register use in a DBG_VALUE instruction, and the old register
is a subreg, and the new register is a physical register,
then we need to use substPhysReg in order to extract the correct
subreg.
Reviewers: wmi, aprantl
Reviewed By: wmi
Subscribers: hiraditya, MatzeB, qcolombet, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D50844
llvm-svn: 340326
Summary:
So far, `isReturn` property is used to mean both a return instruction
from a functon and the end of an EH scope, a scope that starts with a EH
scope entry BB and ends with a catchret or a cleanupret instruction.
Because WinEH uses funclets, all EH-scope-ending instructions are also
real return instruction from a function. But for wasm, they only serve
as the end marker of an EH scope but not a return instruction that
exits a function. This mismatch caused incorrect prolog and epilog
generation in wasm EH scopes. This patch fixes this.
This patch is in the same vein with rL333045, which splits
`MachineBasicBlock::isEHFuncletEntry` into `isEHFuncletEntry` and
`isEHScopeEntry`.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50653
llvm-svn: 340325
