With fix of uninitialized variable.
Original commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses with use of llvm::LoadedObjectInfo
interface. We assigned file offsets as addressed. Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well. That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 304078
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses with use of llvm::LoadedObjectInfo
interface. We assigned file offsets as addressed. Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well. That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 304002
With fix of test compilation.
Initial commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 303983
Merging two type streams is one of the most time consuming
parts of generating a PDB, and as such it needs to be as
fast as possible. The visitor abstractions used for interoperating
nicely with many different types of inputs and outputs have
been used widely and help greatly for testability and implementing
tools, but the abstractions build up and get in the way of
performance.
This patch removes all of the visitation stuff from the type
stream merger, essentially re-inventing the leaf / member switch
and loop, but at a very low level. This allows us many other
optimizations, such as not actually deserializing *any* records
(even member records which don't describe their own length), as
the operation of "figure out how long this record is" is somewhat
faster than "figure out how long this record *and* get all its
fields out". Furthermore, whereas before we had to deserialize,
re-write type indices, then re-serialize, now we don't have to
do any of those 3 steps. We just find out where the type indices
are and pull them directly out of the byte stream and re-write
them.
This is worth a 50-60% performance increase. On top of all other
optimizations that have been applied this week, I now get the
following numbers when linking lld.exe and lld.pdb
MSVC: 25.67s
Before This Patch: 18.59s
After This Patch: 8.92s
So this is a huge performance win.
Differential Revision: https://reviews.llvm.org/D33564
llvm-svn: 303935
It was using the number of blocks of the entire PDB file as the number
of blocks of each stream that was created. This was only an issue in
the readLongestContiguousChunk function, which was never called prior.
This bug surfaced when I updated an algorithm to use this function and
the algorithm broke.
llvm-svn: 303916
This was originally reverted because it was a breaking a bunch
of bots and the breakage was not surfacing on Windows. After much
head-scratching this was ultimately traced back to a bug in the
lit test runner related to its pipe handling. Now that the bug
in lit is fixed, Windows correctly reports these test failures,
and as such I have finally (hopefully) fixed all of them in this
patch.
llvm-svn: 303446
This is a squash of ~5 reverts of, well, pretty much everything
I did today. Something is seriously broken with lit on Windows
right now, and as a result assertions that fire in tests are
triggering failures. I've been breaking non-Windows bots all
day which has seriously confused me because all my tests have
been passing, and after running lit with -a to view the output
even on successful runs, I find out that the tool is crashing
and yet lit is still reporting it as a success!
At this point I don't even know where to start, so rather than
leave the tree broken for who knows how long, I will get this
back to green, and then once lit is fixed on Windows, hopefully
hopefully fix the remaining set of problems for real.
llvm-svn: 303409
Right now we have multiple notions of things that represent collections of
types. Most commonly used are TypeDatabase, which is supposed to keep
mappings from TypeIndex to type name when reading a type stream, which
happens when reading PDBs. And also TypeTableBuilder, which is used to
build up a collection of types dynamically which we will later serialize
(i.e. when writing PDBs).
But often you just want to do some operation on a collection of types, and
you may want to do the same operation on any kind of collection. For
example, you might want to merge two TypeTableBuilders or you might want
to merge two type streams that you loaded from various files.
This dichotomy between reading and writing is responsible for a lot of the
existing code duplication and overlapping responsibilities in the existing
CodeView library classes. For example, after building up a
TypeTableBuilder with a bunch of type records, if we want to dump it we
have to re-invent a bunch of extra glue because our dumper takes a
TypeDatabase or a CVTypeArray, which are both incompatible with
TypeTableBuilder.
This patch introduces an abstract base class called TypeCollection which
is shared between the various type collection like things. Wherever we
previously stored a TypeDatabase& in some common class, we now store a
TypeCollection&.
The advantage of this is that all the details of how the collection are
implemented, such as lazy deserialization of partial type streams, is
completely transparent and you can just treat any collection of types the
same regardless of where it came from.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303388
There is often a lot of boilerplate code required to visit a type
record or type stream. The #1 use case is that you have a sequence
of bytes that represent one or more records, and you want to
deserialize each one, switch on it, and call a callback with the
deserialized record that the user can examine. Currently this
requires at least 6 lines of code:
codeview::TypeVisitorCallbackPipeline Pipeline;
Pipeline.addCallbackToPipeline(Deserializer);
Pipeline.addCallbackToPipeline(MyCallbacks);
codeview::CVTypeVisitor Visitor(Pipeline);
consumeError(Visitor.visitTypeRecord(Record));
With this patch, it becomes one line of code:
consumeError(codeview::visitTypeRecord(Record, MyCallbacks));
This is done by having the deserialization happen internally inside
of the visitTypeRecord function. Since this is occasionally not
desirable, the function provides a 3rd parameter that can be used
to change this behavior.
Hopefully this can significantly reduce the barrier to entry
to using the visitation infrastructure.
Differential Revision: https://reviews.llvm.org/D33245
llvm-svn: 303271
This adds a visitor that is capable of accessing type
records randomly and caching intermediate results that it
learns about during partial linear scans. This yields
amortized O(1) access to a type stream even though type
streams cannot normally be indexed.
Differential Revision: https://reviews.llvm.org/D33009
llvm-svn: 302936
llvm-readobj hand rolls some CodeView parsing code for string
tables, so this patch updates it to re-use some of the newly
introduced parsing code in LLVMDebugInfoCodeView.
Differential Revision: https://reviews.llvm.org/D32772
llvm-svn: 302052
This was reverted due to a "missing" file, but in reality
what happened was that I renamed a file, and then due to
a merge conflict both the old file and the new file got
added to the repository. This led to an unused cpp file
being in the repo and not referenced by any CMakeLists.txt
but #including a .h file that wasn't in the repo. In an
even more unfortunate coincidence, CMake didn't report the
unused cpp file because it was in a subdirectory of the
folder with the CMakeLists.txt, and not in the same directory
as any CMakeLists.txt.
The presence of the unused file was then breaking certain
tools that determine file lists by globbing rather than
by what's specified in CMakeLists.txt
In any case, the fix is to just remove the unused file from
the patch set.
llvm-svn: 302042
Check to make sure no compile units have the same DW_AT_stmt_list values. Report a verification error if they do.
Differential Revision: https://reviews.llvm.org/D32771
llvm-svn: 302039
The patch is failing to add StringTableStreamBuilder.h, but that isn't
even discovered because the corresponding StringTableStreamBuilder.cpp
isn't added to any CMakeLists.txt file and thus never built. I think
this patch is just incomplete.
llvm-svn: 302002
Previously we had knowledge of how to serialize and deserialize
a string table inside of DebugInfo/PDB, but the string table
that it serializes contains a piece that is actually considered
CodeView and can appear outside of a PDB. We already have logic
in llvm-readobj and MCCodeView to read and write this format,
so it doesn't make sense to duplicate the logic in DebugInfoPDB
as well.
This patch makes codeview::StringTable (for writing) and
codeview::StringTableRef (for reading), updates DebugInfoPDB
to use these classes for its own writing, and updates llvm-readobj
to additionally use StringTableRef for reading.
It's a bit more difficult to get MCCodeView to use this for
writing, but it's a logical next step.
llvm-svn: 301986
This patch verifies the .debug_line:
- verify all addresses in a line table sequence have ascending addresses
- verify that all line table file indexes are valid
Unit tests added for both cases.
Differential Revision: https://reviews.llvm.org/D32765
llvm-svn: 301984
LTO and other fancy linking previously led to DWARF that contained invalid references. We already validate that CU relative references fall into the CU, and the DW_FORM_ref_addr references fall inside the .debug_info section, but we didn't validate that the references pointed to correct DIE offsets. This new verification will ensure that all references refer to actual DIEs and not an offset in between.
This caught a bug in DWARFUnit::getDIEForOffset() where if you gave it any offset, it would match the DIE that mathes the offset _or_ the next DIE. This has been fixed.
Differential Revision: https://reviews.llvm.org/D32722
llvm-svn: 301971
With the forthcoming codeview::StringTable which a pdb::StringTable
would hold an instance of as one member, this ambiguity becomes
confusing. Rename to PDBStringTable to avoid this.
llvm-svn: 301948
lldb-dwarfdump gets a new "--verify" option that will verify a single file's DWARF debug info and will print out any errors that it finds. It will return an non-zero exit status if verification fails, and a zero exit status if verification succeeds. Adding the --quiet option will suppress any output the STDOUT or STDERR.
The first part of the verify does the following:
- verifies that all CU relative references (DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref8, DW_FORM_ref_udata) have valid CU offsets
- verifies that all DW_FORM_ref_addr references have valid .debug_info offsets
- verifies that all DW_AT_ranges attributes have valid .debug_ranges offsets
- verifies that all DW_AT_stmt_list attributes have valid .debug_line offsets
- verifies that all DW_FORM_strp attributes have valid .debug_str offsets
Unit tests were added for each of the above cases.
Differential Revision: https://reviews.llvm.org/D32707
llvm-svn: 301844
Associate the version-when-defined with definitions of standard DWARF
constants. Identify the "vendor" for DWARF extensions.
Use this information to verify FORMs in .debug_abbrev are defined as
of the DWARF version specified in the associated unit.
Removed two tests that had specified DWARF v1 (which essentially does
not exist).
Differential Revision: http://reviews.llvm.org/D30785
llvm-svn: 300875
Previously the dumping of class definitions was very primitive,
and it made it hard to do more than the most trivial of output
formats when dumping. As such, we would only dump one line for
each field, and then dump non-layout items like nested types
and enums.
With this patch, we do a complete analysis of the object
hierarchy including aggregate types, bases, virtual bases,
vftable analysis, etc. The only immediately visible effects
of this are that a) we can now dump a line for the vfptr where
before we would treat that as padding, and b) we now don't
treat virtual bases that come at the end of a class as padding
since we have a more detailed analysis of the class's storage
usage.
In subsequent patches, we should be able to use this analysis
to display a complete graphical view of a class's layout including
recursing arbitrarily deep into an object's base class / aggregate
member hierarchy.
llvm-svn: 300133
David Blaikie pointed out that the `setForceChildren` API is no longer needed and should be removed from the DWARF Generator APIs.
Also the DWARFDebugInfoTest file had some copy pasted comments that are not relevant. I've removed them.
llvm-svn: 297056
In the DWARF 4 Spec section 7.2.2, data in many DWARF sections, and some DWARF structures start with "Initial Length Values", which are a 32-bit length, and an optional 64-bit length if the 32 bit value == UINT32_MAX.
This patch abstracts the Initial Length type in YAML, and extends its use to all the DWARF structures that are supported in the DWARFYAML code that have Initial Length values.
llvm-svn: 296911
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
Take DW_FORM_implicit_const attribute value into account when profiling
DIEAbbrevData.
Currently if we have two similar types with implicit_const attributes and
different values we end up with only one abbrev in .debug_abbrev section.
For example consider two structures: S1 with implicit_const attribute ATTR
and value VAL1 and S2 with implicit_const ATTR and value VAL2.
The .debug_abbrev section will contain only 1 related record:
[N] DW_TAG_structure_type DW_CHILDREN_yes
DW_AT_ATTR DW_FORM_implicit_const VAL1
// ....
This is incorrect as struct S2 (with VAL2) will use abbrev record with VAL1.
With this patch we will have two different abbreviations here:
[N] DW_TAG_structure_type DW_CHILDREN_yes
DW_AT_ATTR DW_FORM_implicit_const VAL1
// ....
[M] DW_TAG_structure_type DW_CHILDREN_yes
DW_AT_ATTR DW_FORM_implicit_const VAL2
// ....
llvm-svn: 296691
This was due to the test stream choosing an arbitrary partition
index for introducing the discontinuity rather than choosing
an index that would be correctly aligned for the type of data.
Also added an assertion into FixedStreamArray so that this will
be caught on all bots in the future, and not just the UBSan bot.
llvm-svn: 296661
This re-adds all the binary stream tests. This was reverted due
to some misaligned reads. For now the offending test is
disabled while I investigate.
llvm-svn: 296643
I already created a BinaryStreamError class for this purpose,
so update the code to use that on the remaining occurrences
of errc values.
This should also address the issue which led to r296583.
llvm-svn: 296640
Unfortunately, mingw's libstdc++ doesn't provide winsock2 errors.
That said, we should avoid raising OS-oriented error code in our code.
For now, I suggest to define custom error from std::error_category.
See also; https://reviews.llvm.org/D20592
llvm-svn: 296583
Unfortunately, mingw's libstdc++ doesn't provide winsock2 errors.
That said, we should avoid raising OS-oriented error code in our code.
For now, I suggest to define custom error from std::error_category.
See also; https://reviews.llvm.org/D20592
llvm-svn: 296581
A bug was uncovered where if you have a StreamRef whose ViewOffset
is > 0, then when you call readLongestContiguousChunk it will
succeed even when it shouldn't, and it always return you a
buffer that was taken as if the ViewOffset was 0.
Fixed this bug and added a test for it.
llvm-svn: 296556
Requesting DWARF v5 will now get you the new compile-unit and
type-unit headers. llvm-dwarfdump will also recognize them.
Differential Revision: http://reviews.llvm.org/D30206
llvm-svn: 296514
Before the endianness was specified on each call to read
or write of the StreamReader / StreamWriter, but in practice
it's extremely rare for streams to have data encoded in
multiple different endiannesses, so we should optimize for the
99% use case.
This makes the code cleaner and more general, but otherwise
has NFC.
llvm-svn: 296415
This was reverted because it was breaking some builds, and
because of incorrect error code usage. Since the CL was
large and contained many different things, I'm resubmitting
it in pieces.
This portion is NFC, and consists of:
1) Renaming classes to follow a consistent naming convention.
2) Fixing the const-ness of the interface methods.
3) Adding detailed doxygen comments.
4) Fixing a few instances of passing `const BinaryStream& X`. These
are now passed as `BinaryStreamRef X`.
llvm-svn: 296394
