In some cases, the max backedge taken count can be more conservative
than the exact backedge taken count (for instance, because
ScalarEvolution::getRange is not control-flow sensitive whereas
computeExitLimitFromICmp can be). In these cases,
computeExitLimitFromCond (specifically the bit that deals with `and` and
`or` instructions) can create an ExitLimit instance with a
`SCEVCouldNotCompute` max backedge count expression, but a computable
exact backedge count expression. This violates an implicit SCEV
assumption: a computable exact BE count should imply a computable max BE
count.
This change
- Makes the above implicit invariant explicit by adding an assert to
ExitLimit's constructor
- Changes `computeExitLimitFromCond` to be more robust around
conservative max backedge counts
llvm-svn: 258184
Summary:
Also add a stricter post-condition for IndVarSimplify.
Fixes PR25578. Test case by Michael Zolotukhin.
Reviewers: hfinkel, atrick, mzolotukhin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15059
llvm-svn: 254977
Summary:
(Note: the problematic invocation of hoistIVInc that caused PR24804 came
from IndVarSimplify, not from SCEVExpander itself)
Fixes PR24804. Test case by David Majnemer.
Reviewers: hfinkel, majnemer, atrick, mzolotukhin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15058
llvm-svn: 254976
The nuw constraint will not be satisfied unless <expr> == 0.
This bug has been around since r102234 (in 2010!), but was uncovered by
r251052, which introduced more aggressive optimization of nuw scev expressions.
Differential Revision: http://reviews.llvm.org/D14850
llvm-svn: 253627
The bug: I missed adding break statements in the switch / case.
Original commit message:
[SCEV] Teach SCEV some axioms about non-wrapping arithmetic
Summary:
- A s< (A + C)<nsw> if C > 0
- A s<= (A + C)<nsw> if C >= 0
- (A + C)<nsw> s< A if C < 0
- (A + C)<nsw> s<= A if C <= 0
Right now `C` needs to be a constant, but we can later generalize it to
be a non-constant if needed.
Reviewers: atrick, hfinkel, reames, nlewycky
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13686
llvm-svn: 252236
Summary:
Since now Scalar Evolution can create non-add rec expressions for PHI
nodes, it can also create SCEVConstant expressions. This will confuse
replaceCongruentPHIs, which previously relied on the fact that SCEV
could not produce constants in this case.
We will now replace the node with a constant in these cases - or avoid
processing the Phi in case of a type mismatch.
Reviewers: sanjoy
Subscribers: llvm-commits, majnemer
Differential Revision: http://reviews.llvm.org/D14230
llvm-svn: 251938
Commit 251839 triggers miscompiles on some bots:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly-fast/builds/13723
(The commit is listed in 13722, but due to an existing failure introduced in
13721 and reverted in 13723 the failure is only visible in 13723)
To verify r251839 is indeed the only change that triggered the buildbot failures
and to ensure the buildbots remain green while investigating I temporarily
revert this commit. At the current state it is unclear if this commit introduced
some miscompile or if it only exposed code to Polly that is subsequently
miscompiled by Polly.
llvm-svn: 251901
Summary:
This patch adds support to check if a loop has loop invariant conditions which lead to loop exits. If so, we know that if the exit path is taken, it is at the first loop iteration. If there is an induction variable used in that exit path whose value has not been updated, it will keep its initial value passing from loop preheader. We can therefore rewrite the exit value with
its initial value. This will help remove phis created by LCSSA and enable other optimizations like loop unswitch.
Reviewers: sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13974
llvm-svn: 251839
Prevent `createNodeFromSelectLikePHI` from creating SCEV expressions
that break LCSSA.
A better fix for the same issue is to teach SCEVExpander to not break
LCSSA by inserting PHI nodes at appropriate places. That's planned for
the future.
Fixes PR25360.
llvm-svn: 251756
Summary:
This patch adds support to check if a loop has loop invariant conditions which lead to loop exits. If so, we know that if the exit path is taken, it is at the first loop iteration. If there is an induction variable used in that exit path whose value has not been updated, it will keep its initial value passing from loop preheader. We can therefore rewrite the exit value with
its initial value. This will help remove phis created by LCSSA and enable other optimizations like loop unswitch.
Reviewers: sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13974
llvm-svn: 251492
The test case wasn't testing what it was commented to be testing; and
when I tried to fix the test I noticed that SCEV does not support the
simplification that the test was supposed to test.
This change removes the test case to avoid confusion.
llvm-svn: 251053
Summary:
An unsigned comparision is equivalent to is corresponding signed version
if both the operands being compared are positive. Teach SCEV to use
this fact when profitable.
Reviewers: atrick, hfinkel, reames, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13687
llvm-svn: 251051
Summary:
- A s< (A + C)<nsw> if C > 0
- A s<= (A + C)<nsw> if C >= 0
- (A + C)<nsw> s< A if C < 0
- (A + C)<nsw> s<= A if C <= 0
Right now `C` needs to be a constant, but we can later generalize it to
be a non-constant if needed.
Reviewers: atrick, hfinkel, reames, nlewycky
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13686
llvm-svn: 251050
Summary:
`cloneArithmeticIVUser` currently trips over expression like `add %iv,
-1` when `%iv` is being zero extended -- it tries to construct the
widened use as `add %iv.zext, zext(-1)` and (correctly) fails to prove
equivalence to `zext(add %iv, -1)` (here the SCEV for `%iv` is
`{1,+,1}`).
This change teaches `IndVars` to try sign extending the non-IV operand
if that makes the newly constructed IV use equivalent to the widened
narrow IV use.
Reviewers: atrick, hfinkel, reames
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13717
llvm-svn: 250483
Summary:
`getConstantEvolutionLoopExitValue` and `ComputeExitCountExhaustively`
assumed all phi nodes in the loop header have the same order of incoming
values. This is not correct, and this commit changes
`getConstantEvolutionLoopExitValue` and `ComputeExitCountExhaustively`
to lookup the backedge value of a phi node using the loop's latch block.
Unfortunately, there is still some code duplication
`getConstantEvolutionLoopExitValue` and `ComputeExitCountExhaustively`.
At some point in the future we should extract out a helper class /
method that can evolve constant evolution phi nodes across iterations.
Fixes 25060. Thanks to Mattias Eriksson for the spot-on analysis!
Depends on D13457.
Reviewers: atrick, hfinkel
Subscribers: materi, llvm-commits
Differential Revision: http://reviews.llvm.org/D13458
llvm-svn: 249712
Summary:
After r249211, SCEV can see through some LCSSA phis. Add a
`replacementPreservesLCSSAForm` check before replacing uses of these phi
nodes with a simplified use of the induction variable to avoid breaking
LCSSA.
Fixes 25047.
Depends on D13460.
Reviewers: atrick, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13461
llvm-svn: 249575
Summary:
After r249211, `getSCEV(X) == getSCEV(Y)` does not guarantee that X and
Y are related in the dominator tree, even if X is an operand to Y (I've
included a toy example in comments, and a real example as a test case).
This commit changes `SimplifyIndVar` to require a `DominatorTree`. I
don't think this is a problem because `ScalarEvolution` requires it
anyway.
Fixes PR25051.
Depends on D13459.
Reviewers: atrick, hfinkel
Subscribers: joker.eph, llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D13460
llvm-svn: 249471
Summary:
This change teaches SCEV that to prove `A u< B` it is sufficient to
prove each of these facts individually:
- B >= 0
- A s< B
- A >= 0
In practice, SCEV sometimes finds it easier to prove these facts
individually than to prove `A u< B` as one atomic step.
Reviewers: reames, atrick, nlewycky, hfinkel
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13042
llvm-svn: 249168
`ScalarEvolution::isImpliedCondOperandsViaNoOverflow` tries to cast the
operand type of the comparison it is given to an `IntegerType`. This is
incorrect because it could actually be simplifying a comparison between
two pointers. Switch it to using `getTypeSizeInBits` instead, which
does the right thing for both pointers and integers.
Fixed PR24956.
llvm-svn: 248743
Before this change `HasSameValue` would return true for distinct
`alloca` instructions if they happened to be allocating the same
type (`alloca` instructions are not specified as reading memory). This
change adds an explicit whitelist of instruction types for which
"identical" instructions compute the same value.
Fixes PR24952.
llvm-svn: 248690
Summary:
If the trip count of a specific backedge is `N`, then we know that
backedge is effectively guarded by the condition `{0,+,1} u< N`. This
change teaches SCEV to use this condition to prove things in
`isLoopBackedgeGuardedByCond`.
Depends on D12948
Depends on D12949
The original checkin, r248608 had to be backed out due to an issue with
a ObjCXX unit test. That issue is now fixed, so re-landing.
Reviewers: atrick, reames, majnemer, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12950
llvm-svn: 248638
Summary:
This change teaches SCEV's `isImpliedCond` two new identities:
A u< B u< -C => (A + C) u< (B + C)
A s< B s< INT_MIN - C => (A + C) s< (B + C)
While these are useful on their own, they're really intended to support
D12950.
The original checkin, r248606 had to be backed out due to an issue with
a ObjCXX unit test. That issue is now fixed, so re-landing.
Reviewers: atrick, reames, majnemer, nlewycky, hfinkel
Subscribers: aadg, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12948
llvm-svn: 248637
Summary:
If the trip count of a specific backedge is `N`, then we know that
backedge is effectively guarded by the condition `{0,+,1} u< N`. This
change teaches SCEV to use this condition to prove things in
`isLoopBackedgeGuardedByCond`.
Depends on D12948
Depends on D12949
Reviewers: atrick, reames, majnemer, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12950
llvm-svn: 248608
Summary:
This change teaches SCEV's `isImpliedCond` two new identities:
A u< B u< -C => (A + C) u< (B + C)
A s< B s< INT_MIN - C => (A + C) s< (B + C)
While these are useful on their own, they're really intended to support
D12950.
Reviewers: atrick, reames, majnemer, nlewycky, hfinkel
Subscribers: aadg, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12948
llvm-svn: 248606
Because -indvars widens induction variables through arithmetic,
`NeverNegative` cannot be a property of the `WidenIV` (a `WidenIV`
manages information for all transitive uses of an IV being widened,
including uses of `-1 * IV`). Instead it must live on `NarrowIVDefUse`
which manages information for a specific def-use edge in the transitive
use list of an induction variable.
This change also adds a test case that demonstrates the problem with
r248045.
llvm-svn: 248107
Summary:
If an induction variable is provably non-negative, its sign extension is
equal to its zero extension. This means narrow uses like
icmp slt iNarrow %indvar, %rhs
can be widened into
icmp slt iWide zext(%indvar), sext(%rhs)
Reviewers: atrick, mcrosier, hfinkel
Subscribers: hfinkel, reames, llvm-commits
Differential Revision: http://reviews.llvm.org/D12745
llvm-svn: 248045
In `IndVarSimplify::ExpandSCEVIfNeeded`,
`SCEVExpander::findExistingExpansion` may return an `llvm::Value` that
differs in type from the SCEV it was asked to find an expansion for (but
computes the same value). In such cases, we fall back on
`expandCodeFor`; and rely on LLVM to CSE the two equivalent
expressions (different only by a no-op cast) into a single computation.
I tried a few other approaches to fixing PR24783, all of which turned
out to be more complex than this current version:
1. Move the `ExpandSCEVIfNeeded` logic into `expandCodeFor`. This got
problematic because currently we do not pass in the `Loop *` into
`expandCodeFor`. Changing the interface to do this is a more
invasive change, and really does not make much semantic sense unless
the SCEV being passed in is an add recurrence.
There is also the problem of `expandCodeFor` being used in places
other than `indvars` -- there may be performance / correctness
issues elsewhere if `expandCodeFor` is moved from always generating
IR from scratch to cache-like model.
2. Have `findExistingExpansion` only return expression with the correct
type. This would make `isHighCostExpansionHelper` and thus
`isHighCostExpansion` more conservative than necessary.
3. Insert casts on the value returned by `findExistingExpansion` if
needed using `InsertNoopCastOfTo`. This is complicated because
`InsertNoopCastOfTo` depends on internal state of its
`SCEVExpander` (specifically `Builder.GetInserPoint()`), and this
may not be set up when `ExpandSCEVIfNeeded` is called.
4. Manually insert casts on the value returned by
`findExistingExpansion` if needed using `InsertNoopCastOfTo` via
`CastInst::Create`. This is probably workable, but figuring out the
location where the cast instruction needs to be inserted has enough
edge cases (arguments, constants, invokes, LCSSA must be preserved)
makes me feel what I have right now is simplest solution.
llvm-svn: 247749
Here we make ScalarEvolution::isKnownPredicate, indirectly, a little smarter.
Given some relational comparison operator OP, and two AddRec SCEVs, {I,+,S} OP
{J,+,T}, we can reduce this to the comparison I OP J when S == T, both AddRecs
are for the same loop, and both are known not to wrap.
As it turns out, because of the way that backedge-guard expressions can be
leveraged when computing known predicates, this allows indvars to simplify the
if-statement comparison in this loop:
void foo (int *a, int *b, int n) {
for (int i = 0; i < n; ++i) {
if (i > n)
a[i] = b[i] + 1;
}
}
which, somewhat surprisingly, we were not previously optimizing away.
llvm-svn: 245400
Summary:
Was D9784: "Remove loop variant range check when induction variable is
strictly increasing"
This change re-implements D9784 with the two differences:
1. It does not use SCEVExpander and does not generate new
instructions. Instead, it does a quick local search for existing
`llvm::Value`s that it needs when modifying the `icmp`
instruction.
2. It is more general -- it deals with both increasing and decreasing
induction variables.
I've added all of the tests included with D9784, and two more.
As an example on what this change does (copied from D9784):
Given C code:
```
for (int i = M; i < N; i++) // i is known not to overflow
if (i < 0) break;
a[i] = 0;
}
```
This transformation produces:
```
for (int i = M; i < N; i++)
if (M < 0) break;
a[i] = 0;
}
```
Which can be unswitched into:
```
if (!(M < 0))
for (int i = M; i < N; i++)
a[i] = 0;
}
```
I went back and forth on whether the top level logic should live in
`SimplifyIndvar::eliminateIVComparison` or be put into its own
routine. Right now I've put it under `eliminateIVComparison` because
even though the `icmp` is not *eliminated*, it no longer is an IV
comparison. I'm open to putting it in its own helper routine if you
think that is better.
Reviewers: reames, nicholas, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11278
llvm-svn: 243331
Summary:
In RewriteLoopExitValues, before expanding out an SCEV expression using
SCEVExpander, try to see if an existing LLVM IR expression already
computes the value we're interested in. If so use that existing
expression.
Apart from reducing IndVars' reliance on the rest of the compilation
pipeline, this also prevents IndVars from concluding some expressions as
"high cost" when they're not. For instance,
`InductiveRangeCheckElimination` often emits code of the following form:
```
len = umin(len_A, len_B)
loop:
...
if (i++ < len)
goto loop
outside_loop:
use(i)
```
`SCEVExpander` refuses to rewrite the use of `i` in `outside_loop`,
since it thinks the value of `i` on loop exit, `len`, is a high cost
expansion since it contains an `umax` in it. With this change,
`IndVars` can see that it can re-use `len` instead of creating a new
expression to compute `umin(len_A, len_B)`.
I considered putting this cleverness in `SCEVExpander`, but I was
worried that it may then have a deterimental effect on other passes
that use it. So I decided it was better to just do this in the one
place where it seems like an obviously good idea, with the intent of
generalizing later if needed.
Reviewers: atrick, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10782
llvm-svn: 241838
The personality routine currently lives in the LandingPadInst.
This isn't desirable because:
- All LandingPadInsts in the same function must have the same
personality routine. This means that each LandingPadInst beyond the
first has an operand which produces no additional information.
- There is ongoing work to introduce EH IR constructs other than
LandingPadInst. Moving the personality routine off of any one
particular Instruction and onto the parent function seems a lot better
than have N different places a personality function can sneak onto an
exceptional function.
Differential Revision: http://reviews.llvm.org/D10429
llvm-svn: 239940
The patch evaluates the expansion cost of exitValue in indVarSimplify pass, and only does the rewriting when the expansion cost is low or loop can be deleted with the rewriting. It provides an option "-replexitval=" to control the default aggressiveness of the exitvalue rewriting. It also fixes some missing cases in SCEVExpander::isHighCostExpansionHelper to enhance the evaluation of SCEV expansion cost.
Differential Revision: http://reviews.llvm.org/D9800
llvm-svn: 238507
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
llvm-svn: 235145
Summary:
Teach `isHighCostExpansion` to consider divisions by power-of-two
constants as cheap and add a test case. This change is needed for a new
user of `isHighCostExpansion` that will be added in a subsequent change.
Depends on D8995.
Reviewers: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8993
llvm-svn: 234845
Change `llc` and `opt` to run `verifyModule()`. This ensures that we
check the full module before `FunctionPass::doInitialization()` ever
gets called (I was getting crashes in `DwarfDebug` instead of verifier
failures when testing a WIP patch that checks operands of compile
units). In `opt`, also move up debug-info-stripping so that it still
runs before verification.
There was a fair bit of broken code that was sitting in tree.
Interestingly, some were cases of a `select` that referred to itself in
`-instcombine` tests (apparently an intermediate result). I split them
off to `*-noverify.ll` tests with RUN lines like this:
opt < %s -S -disable-verify -instcombine | opt -S | FileCheck %s
This avoids verifying the input file (so we can get the broken code into
`-instcombine), but still verifies the output with a second call to
`opt` (to verify that `-instcombine` will clean it up like it should).
llvm-svn: 233432
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
llvm-svn: 232184
Summary:
DataLayout keeps the string used for its creation.
As a side effect it is no longer needed in the Module.
This is "almost" NFC, the string is no longer
canonicalized, you can't rely on two "equals" DataLayout
having the same string returned by getStringRepresentation().
Get rid of DataLayoutPass: the DataLayout is in the Module
The DataLayout is "per-module", let's enforce this by not
duplicating it more than necessary.
One more step toward non-optionality of the DataLayout in the
module.
Make DataLayout Non-Optional in the Module
Module->getDataLayout() will never returns nullptr anymore.
Reviewers: echristo
Subscribers: resistor, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D7992
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231270
This re-lands change r230921. r230921 was reverted because it broke a
clang test; a checkin fixing the clang test will be commited shortly.
Summary:
As far as I can tell, the real bug causing the issue was fixed in
r230533. SCEVExpander should mark an increment operation as nuw or nsw
only if it can *prove* that the operation does not overflow. There
shouldn't be any situation where we have to do something different
because of no-wrap flags generated by SCEVExpander.
Revert "IndVarSimplify: Allow LFTR to fire more often"
This reverts commit 1ade0f0faa98877b688e0b9da58e876052c1e04e (SVN: 222213).
Revert "IndVarSimplify: Don't let LFTR compare against a poison value"
This reverts commit c0f2b8b528d8a37b0a1522aae90af649d6357eb5 (SVN: 217102).
Reviewers: majnemer, atrick, spatel
Differential Revision: http://reviews.llvm.org/D7979
llvm-svn: 231018
Summary:
As far as I can tell, the real bug causing the issue was fixed in
r230533. SCEVExpander should mark an increment operation as nuw or nsw
only if it can *prove* that the operation does not overflow. There
shouldn't be any situation where we have to do something different
because of no-wrap flags generated by SCEVExpander.
Revert "IndVarSimplify: Allow LFTR to fire more often"
This reverts commit 1ade0f0faa98877b688e0b9da58e876052c1e04e (SVN: 222213).
Revert "IndVarSimplify: Don't let LFTR compare against a poison value"
This reverts commit c0f2b8b528d8a37b0a1522aae90af649d6357eb5 (SVN: 217102).
Reviewers: majnemer, atrick, spatel
Differential Revision: http://reviews.llvm.org/D7979
llvm-svn: 230921
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
(The change was landed in r230280 and caused the regression PR22674.
This version contains a fix and a test-case for PR22674).
When emitting the increment operation, SCEVExpander marks the
operation as nuw or nsw based on the flags on the preincrement SCEV.
This is incorrect because, for instance, it is possible that {-6,+,1}
is <nuw> while {-6,+,1}+1 = {-5,+,1} is not.
This change teaches SCEV to mark the increment as nuw/nsw only if it
can explicitly prove that the increment operation won't overflow.
Apart from the attached test case, another (more realistic)
manifestation of the bug can be seen in
Transforms/IndVarSimplify/pr20680.ll.
Differential Revision: http://reviews.llvm.org/D7778
llvm-svn: 230533
