Right now, it is not possible to run MachineCSE in the middle of the
GlobalISel pipeline. Being able to run generic optimizations between the
core passes of GlobalISel was one of the goals of the new ISel framework.
This is the first attempt to do it.
The problem is that MachineCSE pass assumes all register operands have a
register class, which, in GlobalISel context, won't be true until after the
InstructionSelect pass. The reason for this behaviour is that before
replacing one virtual register with another, MachineCSE pass (and most of
the other optimization machine passes) must check if the virtual registers'
constraints have a (sufficiently large) intersection, and constrain the
resulting register appropriately if such intersection exists.
GlobalISel extends the representation of such constraints from just a
register class to a triple (low-level type, register bank, register
class).
This commit adds MachineRegisterInfo::constrainRegAttrs method that extends
MachineRegisterInfo::constrainRegClass to such a triple.
The idea is that going forward we should use:
- RegisterBankInfo::constrainGenericRegister within GlobalISel's
InstructionSelect pass
- MachineRegisterInfo::constrainRegClass within SelectionDAG ISel
- MachineRegisterInfo::constrainRegAttrs everywhere else regardless
the target and instruction selector it uses.
Patch by Roman Tereshin. Thanks!
llvm-svn: 322805
LLVM Coding Standards:
Function names should be verb phrases (as they represent actions), and
command-like function should be imperative. The name should be camel
case, and start with a lower case letter (e.g. openFile() or isFoo()).
Differential Revision: https://reviews.llvm.org/D40416
llvm-svn: 319168
The instructions addis,addi, bl are used to calculate the address of TLS thread
local variables. These TLS access code sequences are generated repeatedly every
time the thread local variable is accessed. By communicating to Machine CSE that
X2 is guaranteed to have the same value within the same function call (so called
Caller Preserved Physical Register), the redundant TLS access code sequences are
cleaned up.
Differential Revision: https://reviews.llvm.org/D39173
llvm-svn: 318661
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
Summary:
Use use_nodbg_empty() rather than use_empty() in
MachineRegisterInfo::EmitLiveInCopies() when determining if a livein
register has any uses or not. Otherwise a single dbg.value can make us
generate different code, meaning -g would affect code generation.
Found when compiling code for my out-of-tree target. Unfortunately I
haven't been able to reproduce the problem on X86 or any of the other
in-tree targets that I tried, so no test case.
Reviewers: MatzeB
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39044
llvm-svn: 318382
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
A register in CodeGen can be marked as reserved: In that case we
consider the register always live and do not use (or rather ignore)
kill/dead/undef operand flags.
LiveIntervalAnalysis however tracks liveness per register unit (not per
register). We already needed adjustments for this in r292871 to deal
with super/sub registers. However I did not look at aliased register
there. Looking at ARM:
FPSCR (regunits FPSCR, FPSCR~FPSCR_NZCV) aliases with FPSCR_NZCV
(regunits FPSCR_NZCV, FPSCR~FPSCR_NZCV) hence they share a register unit
(FPSCR~FPSCR_NZCV) that represents the aliased parts of the registers.
This shared register unit was previously considered non-reserved,
however given that we uses of the reserved FPSCR potentially violate
some rules (like uses without defs) we should make FPSCR~FPSCR_NZCV
reserved too and stop tracking liveness for it.
This patch:
- Defines a register unit as reserved when: At least for one root
register, the root register and all its super registers are reserved.
- Adjust LiveIntervals::computeRegUnitRange() for new reserved
definition.
- Add MachineRegisterInfo::isReservedRegUnit() to have a canonical way
of testing.
- Stop computing LiveRanges for reserved register units in HMEditor even
with UpdateFlags enabled.
- Skip verification of uses of reserved reg units in the machine
verifier (this usually didn't happen because there would be no cached
liverange but there is no guarantee for that and I would run into this
case before the HMEditor tweak, so may as well fix the verifier too).
Note that this should only affect ARMs FPSCR/FPSCR_NZCV registers today;
aliased registers are rarely used, the only other cases are hexagons
P0-P3/P3_0 and C8/USR pairs which are not mixing reserved/non-reserved
registers in an alias.
Differential Revision: https://reviews.llvm.org/D37356
llvm-svn: 312348
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
The MIR printer dumps a string that describe the register mask of a function.
A static predefined list of register masks matches a static list of strings.
However when the register mask is not from the static predefined list, there is no descriptor string and the printer fails.
This patch adds support to custom register mask printing and dumping.
Also the list of callee saved registers (describing the registers that must be preserved for the caller) might be dynamic.
As such this data needs to be dumped and parsed back to the Machine Register Info.
Differential Revision: https://reviews.llvm.org/D30971
llvm-svn: 298207
Each Calling convention (CC) defines a static list of registers that should be preserved by a callee function. All other registers should be saved by the caller.
Some CCs use additional condition: If the register is used for passing/returning arguments – the caller needs to save it - even if it is part of the Callee Saved Registers (CSR) list.
The current LLVM implementation doesn’t support it. It will save a register if it is part of the static CSR list and will not care if the register is passed/returned by the callee.
The solution is to dynamically allocate the CSR lists (Only for these CCs). The lists will be updated with actual registers that should be saved by the callee.
Since we need the allocated lists to live as long as the function exists, the list should reside inside the Machine Register Info (MRI) which is a property of the Machine Function and managed by it (and has the same life span).
The lists should be saved in the MRI and populated upon LowerCall and LowerFormalArguments.
The patch will also assist to implement future no_caller_saved_regsiters attribute intended for interrupt handler CC.
Differential Revision: https://reviews.llvm.org/D28566
llvm-svn: 297715
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
After instruction selection we perform some checks on each VReg just before
discarding the type information. These checks were assertions before, but that
breaks the fallback path so this patch moves the logic into the main flow and
reports a better error on failure.
llvm-svn: 286289
This changes MachineRegisterInfo to be initializes after parsing all
instructions. This is in preparation for upcoming commits that allow the
register class specification on the operand or deduce them from the
MCInstrDesc.
This commit removes the unused feature of having nonsequential register
numbers. This was confusing anyway as the vreg numbers would be
different after parsing when you had "holes" in your numbering.
This patch also introduces the concept of an incomplete virtual
register. An incomplete virtual register may be used during .mir parsing
to construct MachineOperands without knowing the exact register class
(or register bank) yet.
NFC except for some error messages.
Differential Revision: https://reviews.llvm.org/D22397
llvm-svn: 283848
Summary:
The current implementation of isConstantPhysReg() checks for defs of
physical registers to determine if they are constant. Some
architectures (e.g. AArch64 XZR/WZR) have registers that are constant
and may be used as destinations to indicate the generated value is
discarded, preventing isConstantPhysReg() from returning true. This
change adds a TargetRegisterInfo hook that overrides the no defs check
for cases such as this.
Reviewers: MatzeB, qcolombet, t.p.northover, jmolloy
Subscribers: junbuml, aemerson, mcrosier, rengolin
Differential Revision: https://reviews.llvm.org/D24570
llvm-svn: 282543
It was only really there as a sentinel when instructions had to have precisely
one type. Now that registers are typed, each register really has to have a type
that is sized.
llvm-svn: 281599
Some generic instructions have multiple types. While in theory these always be
discovered by inspecting the single definition of each generic vreg, in
practice those definitions won't always be local and traipsing through a big
function to find them will not be fun.
So this changes MIRPrinter to print out the type of uses as well as defs, if
they're known to be different or not known to be the same.
On the parsing side, we're a little more flexible: provided each register is
given a type in at least one place it's mentioned (and all types are
consistent) we accept the MIR. This doesn't introduce ambiguity but makes
writing tests manually a bit less painful.
llvm-svn: 281204
We want each register to have a canonical type, which means the best place to
store this is in MachineRegisterInfo rather than on every MachineInstr that
happens to use or define that register.
Most changes following from this are pretty simple (you need an MRI anyway if
you're going to be doing any transformations, so just check the type there).
But legalization doesn't really want to check redundant operands (when, for
example, a G_ADD only ever has one type) so I've made use of MCInstrDesc's
operand type field to encode these constraints and limit legalization's work.
As an added bonus, more validation is possible, both in MachineVerifier and
MachineIRBuilder (coming soon).
llvm-svn: 281035
tracksSubRegLiveness only depends on the Subtarget and a cl::opt, there
is not need to change it or save/parse it in a .mir file.
Make the field const and move the initialization LiveIntervalAnalysis to the
MachineRegisterInfo constructor. Also cleanup some code and fix some
instances which better use MachineRegisterInfo::subRegLivenessEnabled() instead
of TargetSubtargetInfo::enableSubRegLiveness().
llvm-svn: 279676
Also verify that we never try to set the size of a vreg associated
to a register class.
Report an error when we encounter that in MIR. Fix a testcase that
hit that error and had a size for no reason.
llvm-svn: 276012
Use the MachineFunctionProperty mechanism to indicate whether the
liveness info is accurate instead of a bool flag on MRI.
Keeps the MRI accessor function for convenience. NFC
Differential Revision: http://reviews.llvm.org/D18767
llvm-svn: 266020
A virtual register may have either a register bank or a register class.
This is represented by a PointerUnion between the related classes.
Typically, a virtual register went through the following states
regarding register class and register bank:
1. Creation: None is set. Virtual registers are fully generic.
2. Register bank assignment: Register bank is set. Virtual registers
live into a register bank, but we do not know the constraints they need
to fulfil.
3. Instruction selection: Register class is set. Virtual registers are
bound by encoding constraints.
To map these states to GlobalISel, the IRTranslator implements #1,
RegBankSelect #2, and Select #3.
llvm-svn: 265696
Use the MachineFunctionProperty mechanism to indicate whether a MachineFunction
is in SSA form instead of a custom method on MachineRegisterInfo. NFC
Differential Revision: http://reviews.llvm.org/D18574
llvm-svn: 265318
For now, generic virtual registers will not have a register class. We may want
to change that. For instance, if we want to use all the methods from
TargetRegisterInfo with generic virtual registers, we need to either have some
sort of generic register classes that do what we want, or teach those methods
how to deal with nullptr register class.
Although the latter seems easy enough to do, we may still want to differenciate
generic register classes from nullptr to catch cases where nullptr gets
introduced by a bug of some sort.
Anyway, I will file a PR to keep track of that.
llvm-svn: 260474
vector.resize() is significantly slower than memset in many STLs
and the cost of initializing these vectors is significant on targets
with many registers. Since we don't need the overhead of a vector,
use a simple unique_ptr instead.
llvm-svn: 254526
This commit zeroes out the virtual register references in the machine
function's liveins in the class 'MachineRegisterInfo' when the virtual
register definitions are cleared.
Reviewers: Matthias Braun
llvm-svn: 243290
We have a detailed def/use lists for every physical register in
MachineRegisterInfo anyway, so there is little use in maintaining an
additional bitset of which ones are used.
Removing it frees us from extra book keeping. This simplifies
VirtRegMap.
Differential Revision: http://reviews.llvm.org/D10911
llvm-svn: 242173
This changes TargetFrameLowering::processFunctionBeforeCalleeSavedScan():
- Rename the function to determineCalleeSaves()
- Pass a bitset of callee saved registers by reference, thus avoiding
the function-global PhysRegUsed bitset in MachineRegisterInfo.
- Without PhysRegUsed the implementation is fine tuned to not save
physcial registers which are only read but never modified.
Related to rdar://21539507
Differential Revision: http://reviews.llvm.org/D10909
llvm-svn: 242165
Add in definedness checks for shift operators, null checks when
pointers are assumed by the code to be non-null, and explicit
unreachables.
llvm-svn: 224255
