Find dependent scripts of GenerateVersionFromVCS in current directory
rather than ../../cmake/modules. I do not see any reason why the former
would not work and The latter is incorrect when GenerateVersionFromVCS
is used from install directory (i.e. in stand-alone builds).
Differential Revision: https://reviews.llvm.org/D57996
llvm-svn: 353674
Summary:
The RFC on moving past C++11 got good traction:
http://lists.llvm.org/pipermail/llvm-dev/2019-January/129452.html
This patch therefore bumps the toolchain versions according to our policy:
llvm.org/docs/DeveloperPolicy.html#toolchain
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits, mehdi_amini, jyknight, rsmith, chandlerc, smeenai, hans, reames, lattner, lhames, erichkeane
Differential Revision: https://reviews.llvm.org/D57264
llvm-svn: 353374
Previously, there were two different scripts for generating VCS headers:
one used by LLVM and one used by Clang and lldb. They were both similar,
but different. They were both broken in their own ways, for example the
one used by Clang didn't properly handle monorepo resulting in an
incorrect version information reported by Clang.
This change unifies two the scripts by introducing a new script that's
used from both LLVM, Clang and lldb, ensures that the new script
supports both monorepo and standalone SVN and Git setups, and removes
the old scripts.
Differential Revision: https://reviews.llvm.org/D57063
llvm-svn: 353268
Reverting D57264 again, it looks like we're down to two bots that need fixing:
polly-amd64-linux
polly-arm-linux
They both have old versions of libstdc++ and recent clang.
llvm-svn: 352954
Summary:
The RFC on moving past C++11 got good traction:
http://lists.llvm.org/pipermail/llvm-dev/2019-January/129452.html
This patch therefore bumps the toolchain versions according to our policy:
llvm.org/docs/DeveloperPolicy.html#toolchain
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits, mehdi_amini, jyknight, rsmith, chandlerc, smeenai, hans, reames, lattner, lhames, erichkeane
Differential Revision: https://reviews.llvm.org/D57264
llvm-svn: 352951
Summary: D56606 was only appending target names to the `LLVM_EXPORTS`/`LLVM_EXPORTS_BUILDTREE_ONLY` properties. Targets showed up correctly in the build-tree `LLVMExports.cmake`, but they were missing in the installed one (as we found in https://bugs.llvm.org/show_bug.cgi?id=40443), because install did not register them explicitly.
Reviewers: mgorny, smeenai, beanz, gottesmm, dschuff, tstellar, serge-sans-paille
Reviewed By: smeenai
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D57383
llvm-svn: 352869
Summary:
The RFC on moving past C++11 got good traction:
http://lists.llvm.org/pipermail/llvm-dev/2019-January/129452.html
This patch therefore bumps the toolchain versions according to our policy:
llvm.org/docs/DeveloperPolicy.html#toolchain
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits, mehdi_amini, jyknight, rsmith, chandlerc, smeenai, hans, reames, lattner, lhames, erichkeane
Differential Revision: https://reviews.llvm.org/D57264
llvm-svn: 352834
A handful of bots are still breaking, either because I missed them in my audit,
they were offline, or something else. I'm contacting their authors, but I'll
revert for now and re-commit later.
llvm-svn: 352814
Summary:
The RFC on moving past C++11 got good traction:
http://lists.llvm.org/pipermail/llvm-dev/2019-January/129452.html
This patch therefore bumps the toolchain versions according to our policy:
llvm.org/docs/DeveloperPolicy.html#toolchain
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits, mehdi_amini, jyknight, rsmith, chandlerc, smeenai, hans, reames, lattner, lhames, erichkeane
Differential Revision: https://reviews.llvm.org/D57264
llvm-svn: 352811
Previously, there were two different scripts for generating VCS headers:
one used by LLVM and one used by Clang. They were both similar, but
different. They were both broken in their own ways, for example the one
used by Clang didn't properly handle monorepo resulting in an incorrect
version information reported by Clang.
This change unifies two the scripts by introducing a new script that's
used from both LLVM and Clang, ensures that the new script supports both
monorepo and standalone SVN and Git setups, and removes the old scripts.
Differential Revision: https://reviews.llvm.org/D57063
llvm-svn: 352729
Summary: We added support for code signing entitlements in add_llvm_executable() with D54443. In the future it would be useful to have this functionality available also for libraries.
Reviewers: beanz, bogner
Reviewed By: bogner
Subscribers: mgorny, llvm-commits, lldb-commits, #lldb
Differential Revision: https://reviews.llvm.org/D57334
llvm-svn: 352628
Refactor the get_llvm_lit_path() logic to respect LLVM_EXTERNAL_LIT,
and require the fallback to be defined explicitly
as LLVM_DEFAULT_EXTERNAL_LIT. This fixes building libcxx standalone
after r346888.
The old logic was using LLVM_EXTERNAL_LIT both as user-defined cache
variable and an optional pre-definition of default value from caller
(e.g. libcxx). It included a hack to make this work by assigning
the value back and forth but it was fragile and stopped working
in libcxx.
The new logic is simpler and more transparent. Default value is
provided in a separate variable, and used only when user-specified
variable is empty (i.e. not overriden).
Differential Revision: https://reviews.llvm.org/D57282
llvm-svn: 352374
Summary:
Capture the current agreed-upon toolchain update policy based on the following
discussions:
- LLVM dev meeting 2018 BoF "Migrating to C++14, and beyond!"
llvm.org/devmtg/2018-10/talk-abstracts.html#bof3
- A Short Policy Proposal Regarding Host Compilers
lists.llvm.org/pipermail/llvm-dev/2018-May/123238.html
- Using C++14 code in LLVM (2018)
lists.llvm.org/pipermail/llvm-dev/2018-May/123182.html
- Using C++14 code in LLVM (2017)
lists.llvm.org/pipermail/llvm-dev/2017-October/118673.html
- Using C++14 code in LLVM (2016)
lists.llvm.org/pipermail/llvm-dev/2016-October/105483.html
- Document and Enforce new Host Compiler Policy
llvm.org/D47073
- Require GCC 5.1 and LLVM 3.5 at a minimum
llvm.org/D46723
Subscribers: jkorous, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D56819
llvm-svn: 351765
Summary: This change factors out compiler checking / warning, and documents LLVM_FORCE_USE_OLD_TOOLCHAIN. It doesn't introduce any functional changes nor policy changes, these will come late.
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D56799
llvm-svn: 351387
Summary:
Allow external projects to import test-related targets like FileCheck, count, not etc. and query binary paths, properties, etc.
This would be useful for LLDB, because it reduces the difference between in-tree vs. standalone builds and simplifies CMake logic.
Reviewers: chapuni, gottesmm, beanz
Reviewed By: beanz
Subscribers: mgorny, lldb-commits, llvm-commits, #lldb
Differential Revision: https://reviews.llvm.org/D56606
llvm-svn: 350959
Summary: A post-commit comment to D55116 amended that this was the correct way for code signing in Xcode.
Reviewers: beanz
Reviewed By: beanz
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D55816
llvm-svn: 350383
Summary:
This function is very similar to add_llvm_library(), so this patch merges it
into add_llvm_library() and replaces all calls to add_llvm_loadable_module(lib ...)
with add_llvm_library(lib MODULE ...)
Reviewers: philip.pfaffe, beanz, chandlerc
Reviewed By: philip.pfaffe
Subscribers: chapuni, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D51748
llvm-svn: 349839
This relands r330742:
"""
Let TableGen write output only if it changed, instead of doing so in cmake.
Removes one subprocess and one temp file from the build for each tablegen
invocation.
No intended behavior change.
"""
In particular, if you see rebuilds after this change that you didn't see
before this change, that's unintended and it's fine to revert this change
again (but let me know).
r330742 got reverted because some people reported that llvm-tblgen ran on every
build after it. This could happen if the depfile output got deleted without
deleting the main .inc output. To fix, make TableGen always write the depfile,
but keep writing the main .inc output only if it has changed. This matches what
we did in cmake before.
Differential Revision: https://reviews.llvm.org/D55842
llvm-svn: 349624
Previously, when compiling Visual Studio targets, one could see random build errors. This was caused by tablegen projects using the same build folders.
This workaround simply chains tablegen projects.
Differential Revision: https://reviews.llvm.org/D54153
llvm-svn: 349596
Previously, when compiling Visual Studio targets, one could see random build errors. This was caused by tablegen projects using the same build folders.
This workaround simply chains tablegen projects.
Differential Revision: https://reviews.llvm.org/D54153
llvm-svn: 349541
- Disable incremental linking by default. /INCREMENTAL adds extra thunks in the EXE, which makes execution slower.
- Set /MT (static CRT lib) by default instead of CMake's default /MD (dll CRT lib). The previous default /MD makes all DLL functions to be thunked, thus making execution slower (memcmp, memset, etc.)
- Adds LLVM_ENABLE_INCREMENTAL_LINK which is set to OFF by default.
Differential revision: https://reviews.llvm.org/D55056
llvm-svn: 349517
Summary:
When using Xcode to build LLVM with code signing, the post-build rule is executed even if the actual build-step was skipped. This causes double-signing errors. We can currently only avoid it by passing the `--force` flag.
Plus some polishing for my previous patch D54443.
Reviewers: beanz, kubamracek
Reviewed By: kubamracek
Subscribers: #lldb, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D55116
llvm-svn: 349070
Summary:
Allow clients to suppress setup of default RPATHs in designated library targets. This is used in LLDB when emitting liblldb as a framework bundle, which itself doesn't load further RPATH-dependent libraries.
This follows the approach in add_llvm_executable().
Reviewers: aprantl, JDevlieghere, davide, friss
Reviewed By: aprantl
Subscribers: mgorny, lldb-commits, llvm-commits, #lldb
Differential Revision: https://reviews.llvm.org/D55316
llvm-svn: 348573
I found the pattern of setting the project_BUILD variable to OFF after
processing the project to be pretty confusing. Using global properties
to explicitly keep track of whether a project has been processed or not
seems much more straightforward, and it also allows us to convert the
macro into a function (which is required for the early return).
Factor the project+type+name combination out into a variable while I'm
here, since it's used a whole bunch of times.
I don't believe this should result in any functional changes.
Differential Revision: https://reviews.llvm.org/D55104
llvm-svn: 348180
Summary: When using `LLVM_EXTERNALIZE_DEBUGINFO` in LLDB, the default dSYM location for the shared library in LLDB.framework is inside the framework bundle. With `LLVM_EXTERNALIZE_DEBUGINFO_OUTPUT_DIR` we can easily fix that. I consider it a useful feature to be able to set a global output directory for external debug info (rather then having a target-specific one). Only implemented for Darwin so far.
Reviewers: beanz, aprantl
Reviewed By: aprantl
Subscribers: mgorny, aprantl, #lldb, lldb-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D55114
llvm-svn: 348118
The add_llvm_symbol_exports function in AddLLVM.cmake creates command
line link flags with paths containing CMAKE_CURRENT_BINARY_DIR, but that
will break if CMAKE_CURRENT_BINARY_DIR contains whitespace. This patch
adds quotes to those paths.
Fixes PR39843.
Patch by John Garvin.
Differential Revision: https://reviews.llvm.org/D55081
llvm-svn: 347937
Summary:
It will cause test tools `FileCheck`, `count`, `not` being built blindly, these
dependencies should move back to clang-tools-extra.
Reviewers: mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54797
llvm-svn: 347448
The diagnostic will trigger on code that does not have any comma operator, but instead default-constructs an object with an explicitly defaulted constructor as the array index argument.
llvm-svn: 347345
Summary: Allow code-signing with entitlements. FORCE may be used to avoid an error when replacing existing signatures.
Reviewers: beanz, bogner
Reviewed By: beanz
Subscribers: mgorny, llvm-commits, lldb-commits
Differential Revision: https://reviews.llvm.org/D54443
llvm-svn: 347068
When using multi-stage builds, we would like support cross-compilation.
Example is 2-stage build when the first stage is compiled for host while
the second stage is compiled for the target.
Normally, the second stage would be also used for compiling runtimes,
but that's not possible when cross-compiling, so we use the first stage
compiler instead. However, we still want to use the second stage paths.
To do so, we set the -resource-dir of the first stage compiler to point
to the resource directory of the second stage.
We also need compiler tools that support the target architecture. These
tools are not guaranteed to be present on the host, but in case of
multi-stage build, we can build these tools in the first stage.
Differential Revision: https://reviews.llvm.org/D54461
llvm-svn: 347025
* Create an install target for it
* Add it under tools/opt-remarks
* Add an export file for the dylib
* Install the llvm-c/OptRemarks.h header
* Add an API to query its version
rdar://45458839
llvm-svn: 346127
There are several places where we use CMAKE_CONFIGURATION_TYPES to determine if we are using an IDE generator and in turn decide not to generate some of the convenience targets (like all the install-* and check-llvm-* targets). This decision is made because IDEs don't always deal well with the thousands of targets LLVM can generate.
This approach does not work for Visual Studio 15's new CMake integration. Because VS15 uses a Ninja generator, it isn't a multi-configuration build, and generating all these extra targets mucks up the UI and adds little value.
With this change we still don't generate these targets by default for Visual Studio and Xcode generators, and LLVM_ENABLE_IDE becomes a switch that can be enabled on the VS15 CMake builds, to improve the IDE experience.
This is a re-land of r340435, with a few minor fix-ups. The issues causing the revert were addressed in r344218, r344219, and r344553.
llvm-svn: 344555
There really aren't any generator behaviors that we need to take `CMAKE_EXTRA_GENERATOR` into account for. Where we need to take different behaviors for IDEs is mostly in enabling or disabling certain build system features that are optional but trip up the IDE UIs. Like the generation of lots of utility targets.
By changing the LLVM_ENABLE_IDE default to only being on for multi-configuration generators, we allow gating where it will impact the UI presentation, while also supporting optionally disabling the generation if your tooling workflow encounters problems. Presently being able to manually disable extra target generation is useful for Visual Studio 2017's CMake integration where the IDE has trouble displaying and working with the large number of optional targets.
llvm-svn: 344553
All uses of this option have been removed, and the intent is to change the purpose and default value of this option. To prevent it from having impacts on users, this patch temporarily removes the option and purges it from CMake caches. In a few days, once this has propagated to contributors I will re-introduce the option with the new default value.
llvm-svn: 344219
Previously adding header and table gen files was conditional on using an IDE. Since these files have the `HEADER_FILE_ONLY` attribute applied they are ignored as sources by all non-IDE generators, so there is really no reason not to include them.
Additionally having the CMake always include these files allows the CMake-server to include them in the sources list for targets, which is valuable to anyone using CMake-server integrated tools.
llvm-svn: 344218
Summary:
Address fixme in r301762. And would simplify the cmake file in
clang-tools-extra.
Reviewers: sammccall
Subscribers: mgorny, llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D52713
llvm-svn: 343473
If required_libs happens to remain unset, CMake would fail with:
list sub-command REVERSE requires list to be present.
Fix by ensuring we do not attempt to reverse an unset variable.
Reported by Tu Vuong.
Differential Revision: https://reviews.llvm.org/D51799
llvm-svn: 343088
Using llvm::getInputFileDirectory() in unit tests is discouraged, so require an explicit opt-in.
This way, cmake also writes ~60 fewer unused files to disk.
Differential Revision: https://reviews.llvm.org/D52095
llvm-svn: 342248
We can't put the unittest source dir map in the configuration
specific directory because VS doesn't have a configure-specific
directory, instead it only knows this at runtime. So we have
to remove this from the path. This in turn means that the path
will be slightly different in VS configurations vs non vs
configurations. In the former, the source map will be in the
parent directory of the executable, and in the latter it will
be in the same directory as the executable. So check both.
llvm-svn: 341590
Occasionally it is useful to have unittest which take inputs.
While we normally try to have this test be more of a lit test
we occasionally don't have tools that can exercise the code
in the right way to test certain things. LLDB has been using
this style of unit test for a while, particularly with regards
to how it tests core dump and minidump file parsing. Recently
i needed this as well for the case where we want to test that
some of the PDB reading code works correctly. It needs to
exercise the code in a way that is not covered by any dumper
and would be impractical to implement in one of the dumpers,
but requires a valid PDB file. Since this is now needed by
more than one project, it makes sense to have this be a
generally supported thing that unit tests can do, and we just
encourage people to use this sparingly.
Differential Revision: https://reviews.llvm.org/D51561
llvm-svn: 341502
GCC triggers false positives if a nothrow function is called through a template argument. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80985 for details. The LLVM libraries have no stable C++ API, so the warning is not useful.
llvm-svn: 341361
It's always replaced with the same (short) static string, so just put that
there directly.
No intended behavior change.
https://reviews.llvm.org/D51357
llvm-svn: 341135
That resulted in the check-llvm-* targets not being avaliable
in the QtCreator-configured build directories.
Moreover, that was a clearly non-NFC change, and i can't find any review
for it.
This reverts commit rL340435.
llvm-svn: 341045
This patch pulls google/benchmark v1.4.1 into the LLVM tree so that any
project could use it for benchmark generation. A dummy benchmark is
added to `llvm/benchmarks/DummyYAML.cpp` to validate the correctness of
the build process.
The current version does not utilize LLVM LNT and LLVM CMake
infrastructure, but that might be sufficient for most users. Two
introduced CMake variables:
* `LLVM_INCLUDE_BENCHMARKS` (`ON` by default) generates benchmark
targets
* `LLVM_BUILD_BENCHMARKS` (`OFF` by default) adds generated
benchmark targets to the list of default LLVM targets (i.e. if `ON`
benchmarks will be built upon standard build invocation, e.g. `ninja` or
`make` with no specific targets)
List of modifications:
* `BENCHMARK_ENABLE_TESTING` is disabled
* `BENCHMARK_ENABLE_EXCEPTIONS` is disabled
* `BENCHMARK_ENABLE_INSTALL` is disabled
* `BENCHMARK_ENABLE_GTEST_TESTS` is disabled
* `BENCHMARK_DOWNLOAD_DEPENDENCIES` is disabled
Original discussion can be found here:
http://lists.llvm.org/pipermail/llvm-dev/2018-August/125023.html
Reviewed by: dberris, lebedev.ri
Subscribers: ilya-biryukov, ioeric, EricWF, lebedev.ri, srhines,
dschuff, mgorny, krytarowski, fedor.sergeev, mgrang, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50894
llvm-svn: 340809
There are several places where we use CMAKE_CONFIGURATION_TYPES to determine if we are using an IDE generator and in turn decide not to generate some of the convenience targets (like all the install-* and check-llvm-* targets). This decision is made because IDEs don't always deal well with the thousands of targets LLVM can generate.
This approach does not work for Visual Studio 15's new CMake integration. Because VS15 uses a Ninja generator, it isn't a multi-configuration build, and generating all these extra targets mucks up the UI and adds little value.
With this change we still don't generate these targets by default for Visual Studio and Xcode generators, and LLVM_ENABLE_IDE becomes a switch that can be enabled on the VS15 CMake builds, to improve the IDE experience.
llvm-svn: 340435
Extend the fix from D40459 to also apply to modules such as the LLVM
gold plugin. This is needed because current binutils master (and future
binutils 2.32) calls dlclose() on bfd plugins as part of a recent fix
for https://sourceware.org/bugzilla/show_bug.cgi?id=23460.
Patch by Evangelos Foutras!
Differential Revision: https://reviews.llvm.org/D50416
llvm-svn: 339883
llvm-strip doesn't handle -gx spelling, so we need to split these
as two separate flags.
Differential Revision: https://reviews.llvm.org/D50684
llvm-svn: 339639
Changes the default Windows target triple returned by
GetHostTriple.cmake from the old environment names (which we wanted to
move away from) to newer, normalized ones. This also requires updating
all tests to use the new systems names in constraints.
Differential Revision: https://reviews.llvm.org/D47381
llvm-svn: 339307
Append LLVM_VERSION_SUFFIX to SOVERSION. This makes it possible
to use the suffix to differentiate binary-incompatible versions
of LLVM built via BUILD_SHARED_LIBS.
We are planning to use this to temporarily preserve ABI-incompatible
variants of LLVM while switching the system between them, e.g. when
rebuilding the system to use libc++. Normally this would mean that once
LLVM is rebuilt using libc++ all the reverse dependencies become
immediately broken. Using a distinct SOVERSION allows us to preserve
the ABI compatibility before all the packages are rebuilt.
Differential Revision: https://reviews.llvm.org/D39939
llvm-svn: 339286
Store LLVM_VERSION_SUFFIX along with other version components
in LLVMConfig.cmake. This fixes preserving the suffix set while building
LLVM to stand-alone builds of other components, e.g. clang,
and therefore improves uniformity between the two build models.
Given that there is no apparent reason to omit this part of version,
that it is distributed to subprojects when building as part of LLVM
and that it is included in LLVM_PACKAGE_VERSION, I think it was omitted
accidentally rather than done on purpose.
Differential Revision: https://reviews.llvm.org/D43701
llvm-svn: 339285
Summary:
As it was, always exporting LLVM_LINK_LLVM_DYLIB caused out-of-tree
clients to lose the ability to link against the dylib, even if in-tree tools did
not. By only exporting the setting if it is enabled, out-of-tree clients get the
correct default, but may still choose if they can.
Reviewers: mgorny, beanz, labath, bogner, chandlerc
Reviewed By: bogner, chandlerc
Subscribers: bollu, llvm-commits
Differential Revision: https://reviews.llvm.org/D49843
llvm-svn: 338119
It looks like currently the UBSan blacklist is only applied when "Undefined" is selected.
This patch updates the cmake file to apply it whenever Undefined is selected
(e.g. 'Address; Undefined' ). This allows us to use the workaround added in
rL335525 when using AddressSan and UBSan together.
Reviewers: eugenis, vitalybuka
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D49558
llvm-svn: 337539
It fires on things like SmallVector<std::pair<int, int>>, where we
intentionally use memcpy instead of calling the assignment operator.
This warning fires in practically every LLVM TU, so we have to do
something about it, even if we aren't interested in being 100% warning
clean with GCC.
Reported as PR37337
llvm-svn: 337492
Summary:
When building out-of-tree tools, there are several macros available to
automate linking against llvm. An examples is `add_llvm_executable`, or
the clang variant of this.
These macros use the LLVM_LINK_LLVM_DYLIB option to decide whether to
link against libraries defined by setting LLVM_LINK_COMPONENTS or to
link against libLLVM instead. Currently this is problematic in
out-of-tree targets, because they cannot identify whether this option is
required or even available. If the option was enabled in LLVM's own
build, the clang libraries are built against libLLVM, so a client
linking against those must link against it too. On the other hand the
client can't just always link against it, because it might not be
available.
This is related to D44391, but that change assumed the client knew
whether they wanted the dylib or not.
Reviewers: mgorny, beanz, labath
Reviewed By: mgorny
Subscribers: bollu, llvm-commits
Differential Revision: https://reviews.llvm.org/D49193
llvm-svn: 337366
This is necessary to make install-<target>-stripped work for
external projects such as runtimes.
Differential Revision: https://reviews.llvm.org/D49335
llvm-svn: 337115
Automatically codesign all executables and dynamic libraries if a
codesigning identity is given (via LLVM_CODESIGNING_IDENTITY). This
option is darwin only for now.
Also update platforms/iOS.cmake to pick up the right versions of
codesign and codesign_allocate.
llvm-svn: 336708
The test is about what can be run on the host, not the cmake target.
When cross-compiling (compiler-rt at least) on Windows, we end up with
lit being unable to run llvm-lit because it can't find the llvm-lit
module.
llvm-svn: 335961
This allows overriding the strip and dsymutil tools, and updates
iOS.cmake to do so. I've also added libtool to iOS.cmake, but it was
already respecting CMAKE_LIBTOOL if set.
llvm-svn: 335900
LLVM currently assumes that Apple platforms will always use ld64. In the
future, LLD Mach-O might also be supported, so add the beginnings of
linker detection support. ld64 is currently the only detected linker,
since `ld64.lld -v` doesn't yield any useful version output, but we can
add that detection later, and in the meantime it's still useful to have
the ld64 identification.
Switch clang's order file check to use this new detection rather than
just checking for the presence of an ld64 executable.
Differential Revision: https://reviews.llvm.org/D48201
llvm-svn: 334780
This is needed when the external projects try to use other tools
besides just the compiler and the linker.
Differential Revision: https://reviews.llvm.org/D47833
llvm-svn: 334136
Summary:
The macro parses out the USE_SHARED option out of the argument list, but
then ignores it and accesses the variable with the same name instead. It
seems the intention here was to check the argument value.
Technically, this is NFC, because the only in-tree usage
(add_llvm_executable) of USE_SHARED sets both the variable and the
argument when calling llvm_config, but it makes the usage of this macro
for out-of-tree users more sensible.
Reviewers: mgorny, beanz
Reviewed By: mgorny
Subscribers: foutrelis, llvm-commits
Differential Revision: https://reviews.llvm.org/D44420
llvm-svn: 334082
The return value of sys::getDefaultTargetTriple, which is derived from
-DLLVM_DEFAULT_TRIPLE, is used to construct tool names, default target,
and in the future also to control the search path directly; as such it
should be used textually, without interpretation by LLVM.
Normalization of this value may lead to unexpected results, for example
if we configure LLVM with -DLLVM_DEFAULT_TARGET_TRIPLE=x86_64-linux-gnu,
normalization will transform that value to x86_64--linux-gnu. Driver will
use that value to search for tools prefixed with x86_64--linux-gnu- which
may be confusing. This is also inconsistent with the behavior of the
--target flag which is taken as-is without any normalization and overrides
the value of LLVM_DEFAULT_TARGET_TRIPLE.
Users of sys::getDefaultTargetTriple already perform their own
normalization as needed, so this change shouldn't impact existing logic.
Differential Revision: https://reviews.llvm.org/D46910
llvm-svn: 332750
This behavior has been the default for a long time, so the default value is On, however this can make it difficult to debug sanitizer failures, so we should have an option to turn it off.
llvm-svn: 332628
Don't hardcode objcopy and strip names, rather use CMAKE_OBJCOPY and
CMAKE_STRIP variables which allows users to override the tools used
such as using llvm-objcopy and llvm-strip instead of binutils versions.
Differential Revision: https://reviews.llvm.org/D46611
llvm-svn: 331827
This change causes us to re-run tablegen for every single target on
every single build. This is much, much worse than the problem being
fixed AFAICT.
On my system, it makes a clean rebuild of `llc` with nothing changed go
from .5s to over 8s. On systems with less parallelism, slower file
systems, or high process startup overhead this will be even more
extreme.
The only way I see this could be a win is in clean builds where we churn
the filesystem. But I think incremental rebuild is more important, and
so if we want to re-instate this, it needs to be done in a way that
doesn't trigger constant re-runs of tablegen.
llvm-svn: 331702
These are necessary changes to support building LLVM for Fuchsia.
While these are not sufficient to run on Fuchsia, they are still
useful when cross-compiling LLVM libraries and runtimes for Fuchsia.
Differential Revision: https://reviews.llvm.org/D46345
llvm-svn: 331423
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
I replaced all uses of LLVM_ON_WIN32 with _WIN32 in r331127 (llvm),
r331069 (clang), r329697 (lldb), r329696 (lld), r329696 (clang-tools-extra).
If your out-of-tree program used LLVM_ON_WIN32, just use _WIN32 instead, which
is set at exactly the same time to exactly the same value.
https://reviews.llvm.org/D46264
llvm-svn: 331224
LLVM might be compiled using a toolchain file which controls the linker
to use via flags (e.g. `-B` or `-fuse-ld=`). Take these flags into
account for linker detection. We can also correct the detection by
manually passing LLVM_USE_LINKER, of course, but it seems more
convenient to have the detection take flags into account.
Differential Revision: https://reviews.llvm.org/D45464
llvm-svn: 330924
Virtually all other tablegen outputs are called .inc, not .gen, so rename these two too for consistency.
No behavior change.
https://reviews.llvm.org/D46058
llvm-svn: 330843
-stdlib=libc++ is added to both the compilation and the link flags, but
the logic for adding it was only checking if it was supported during
compilation and not linking. This could lead to false positives, for
example when using clang with libstdc++ (where the compiler would
support -stdlib=libc++ but then linking would fail because of libc++
actually being unavailable).
llvm-svn: 330761
Removes one subprocess and one temp file from the build for each tablegen
invocation.
No intended behavior change.
https://reviews.llvm.org/D45899
llvm-svn: 330742
This reverts SVN r330158.
Seems that there was a change to linker flags handling in SVN r316972.
That would alter the behaviour to correct the linker flag handling in
CMake (requiring CMake 3.4.3+). Since that is already the minimum
version required for LLVM, hard coding the knowledge of the linker is
not required, which is a strictly better solution.
llvm-svn: 330161
When building out-of-tree compilers (e.g. swift), the linker check here
may yield incorrect values. Ensure that we are using lld before we
attempt to use `--color-diagnostics` for the linker. Other linkers (i.e
bfd, gold) do not support this flag and the test can pass in some cases
and then fail subsequently when building.
llvm-svn: 330158
Summary:
As we are only doing X.0.Z releases (not using the minor version), there is no need to keep -X.Y in the version.
Like patch https://reviews.llvm.org/D41808, I propose that we rename libLLVM-7.0svn.so to libLLVM-7svn.so
This patch will also rename downstream libraries like liblldb-7.0 to liblldb-7
Reviewers: axw, beanz, dim, hans
Reviewed By: dim, hans
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D41869
llvm-svn: 328768
Cmake function llvm_check_source_file_list currently only accepts paths
relative to current CMAKE_SOURCE_DIR or relative to argument SOURCE_DIR.
Extend it to accept any path, including absolute ones.
Differential revision: https://reviews.llvm.org/D44625
llvm-svn: 327912
Summary:
This is needed so that external projects (e.g. a standalone build of
lldb) can link to the LLVM shared library via the USE_SHARED argument of
llvm_config. Without this, llvm_config would add LLVM to the link list,
but then also add the constituent static libraries, resulting in
multiply defined symbols.
Reviewers: beanz, mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44391
llvm-svn: 327484
Append -Wl,-rpath-link conditionally to whether GNU ld.bfd is used
rather than the Linux+!gold conditionals. Also move it out of 'else'
branch of *BSD handling. This fixes build failures with ld.bfd
on Gentoo/FreeBSD, and should cause no harm on other systems using
ld.bfd.
This patch improves the original logic by reusing results of linker
detection introduced in r307852.
Differential Revision: https://reviews.llvm.org/D43751
llvm-svn: 327007
Summary:
It can be useful for tools to be able to retrieve the values of variables
declared via STATISTIC() directly without having to emit them and parse
them back. Use cases include:
* Needing to report specific statistics to a test harness
* Wanting to post-process statistics. For example, to produce a percentage of
functions that were fully selected by GlobalISel
Make this possible by adding llvm::GetStatistics() which returns an
iterator_range that can be used to inspect the statistics that have been
touched during execution. When statistics are disabled (NDEBUG and not
LLVM_ENABLE_STATISTICS) this method will return an empty range.
This patch doesn't address the effect of multiple compilations within the same
process. In such situations, the statistics will be cumulative for all
compilations up to the GetStatistics() call.
Reviewers: qcolombet, rtereshin, aditya_nandakumar, bogner
Reviewed By: rtereshin, bogner
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D43901
This re-commit fixes a missing include of <vector> which it seems clang didn't
mind but G++ and MSVC objected to. It seems that, clang was ok with std::vector
only being forward declared at the point of use since it was fully defined
eventually but G++/MSVC both rejected it at the point of use.
llvm-svn: 326738
Despite building cleanly on my machine in three separate configs, it's failing on pretty much all bots due to missing includes among other things. Investigating.
llvm-svn: 326726
Summary:
It can be useful for tools to be able to retrieve the values of variables
declared via STATISTIC() directly without having to emit them and parse
them back. Use cases include:
* Needing to report specific statistics to a test harness
* Wanting to post-process statistics. For example, to produce a percentage of
functions that were fully selected by GlobalISel
Make this possible by adding llvm::GetStatistics() which returns an
iterator_range that can be used to inspect the statistics that have been
touched during execution. When statistics are disabled (NDEBUG and not
LLVM_ENABLE_STATISTICS) this method will return an empty range.
This patch doesn't address the effect of multiple compilations within the same
process. In such situations, the statistics will be cumulative for all
compilations up to the GetStatistics() call.
Reviewers: qcolombet, rtereshin, aditya_nandakumar, bogner
Reviewed By: rtereshin, bogner
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D43901
llvm-svn: 326723
Introduce the LLVM_ENABLE_PDB option so that users can request them
explicitly instead.
Add /OPT:REF and /OPT:ICF back, which /DEBUG disables by default.
Differential Revision: https://reviews.llvm.org/D43156
llvm-svn: 325296
This patch enables PDB generation for Release build, which has
slightly different optimize option with RelWithDebInfo on windows.
This helps to know slow part of Release build when profiling.
Patch by Takuto Ikuta
Differential Revision: https://reviews.llvm.org/D42632
llvm-svn: 324504
Summary:
Rename LLVM_CONFIG_EXE to LLVM_CONFIG_PATH, and avoid building it if
passed in by user. This is the same way CLANG_TABLEGEN and
LLVM_TABLEGEN are handled, e.g., when -DLLVM_OPTIMIZED_TABLEGEN=ON is
passed.
Differential Revision: https://reviews.llvm.org/D41806
llvm-svn: 323053
Include the LLVM_LIBXML2_ENABLED cache variable in LLVMConfig.cmake
in order to make it available for other LLVM packages to query. This
is necessary to fix stand-alone testing of LLD.
Differential Revision: https://reviews.llvm.org/D42252
llvm-svn: 322973
Summary:
Currently LLVM has no way to support configuring for IDE's like CLion. Like XCode and MSVC's IDE, CLion needs to see all of the headers and tablegen files in order to properly parse the sources.
This patch adds an `LLVM_ENABLE_IDE` option which can be used to configure for IDE's in general. It is used by `LLVMProcessSources.cmake` to determine if the extra source files should be added to the target.
Unfortunately because of the low level of `LLVMProcessSources.cmake`, I'm not sure where the `LLVM_ENABLE_IDE` option should live. I choose `HandleLLVMOptions.cmake` so that out-of-tree Clang builds would correctly configure the option by default.
Reviewers: beanz, mgorny, lebedev.ri
Reviewed By: beanz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40219
llvm-svn: 322349
When cross-compiling for Windows on Unix, the built toolchain will need
to be transferred to Windows to actually run. My opinion is that the
Unix build should use symlinks, and the transfer to Windows should take
care of making those symlinks usable. E.g., I envision tarballs to be a
common form of transfer from Unix to Windows, in which case the tarball
can be created using --dereference to follow the symlinks.
The motivation here is that, when cross-compiling for Windows on Unix,
the installation will *already* create symlinks. The reason is that the
installation script will be invoked without knowing the host system, so
the `if(UNIX)` check in the installation symlink creation script will
reflect the build system rather than the host system. We could either
make the build and install trees both contain copies or both contain
symlinks, and using symlinks is a significant space saving without (in
my opinion) having any detrimental effect on the usage of the cross-
compiled toolchain on Windows.
A secondary motivation is that Windows 10 version 1703 and later finally
lift the administrator rights requirement for creating symbolic links
(if the system is in Developer Mode), which makes symlinks a lot more
practical even on Windows. Of course Unix and Windows symlinks aren't
interoperable, but symlinks for Windows toolchains is a reasonable
future direction to be going in anyway.
Differential Revision: https://reviews.llvm.org/D41314
llvm-svn: 322061
When cross-compiling, we cannot use the just built toolchain, instead
we need to use the host toolchain which we assume has a support for
targeting the selected target platform. We also need to pass the path
to the native version of llvm-config to external projects.
Differential Revision: https://reviews.llvm.org/D41678
llvm-svn: 322046
If the make program isn't in the path, the native configure will fail.
Pass CMAKE_MAKE_PROGRAM to the native configure explicitly to remedy
this, similar to what's already done for external project configuration.
Explicitly set CMAKE_MAKE_PROGRAM before the user flags so that they can
override it for the native build if they desire (though I can't fathom
why that would be useful).
llvm-svn: 322032
Summary:
Always respect existing CMAKE_REQUIRED_FLAGS when adding
additional ones. This is important when cross compiling where
--sysroot and -target were already added.
In particular, this is needed when cross compiling from Darwin to
Linux, since --sysroot is required to find headers and libraries.
Cmake has a similar bug in check_include_file[_cxx] where
CMAKE_REQUIRED_LIBRARIES isn't passed, which causes
try_compile to fail.
(please see https://gitlab.kitware.com/cmake/cmake/merge_requests/1620)
Reviewers: compnerd, silvas, beanz, brad.king
Reviewed By: compnerd
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D41568
llvm-svn: 321434
CMAKE_CL_64 will never be set when cross-compiling with clang-cl, since
CMake relies on an actual VS environment in order to determine it.
Instead, use the size of a void pointer to determine the bit width of
the host compiler (and therefore the host triple), which works for both
native and cross compilation.
Note that, with the impending advent of Windows on AArch64, assuming
that a 64-bit host == x86_64 isn't correct either, but that's something
to be addressed in a follow-up.
Differential Revision: https://reviews.llvm.org/D41155
llvm-svn: 320615
r320413 triggered cmake configure failures when building with
-DLLVM_OPTIMIZED_TABLEGEN=True and with LLVM_EXPERIMENTAL_TARGETS_TO_BUILD set
(e.g. to RISCV). This is because that patch moved to passing through
LLVM_TARGETS_TO_BUILD, and at that point LLVM_EXPERIMENTAL_TARGETS_TO_BUILD
has been merged in to it. LLVM_EXPERIMENTAL_TARGETS_TO_BUILD must be also be
passed through to avoid errors like below:
-- Constructing LLVMBuild project information
CMake Error at CMakeLists.txt:682 (message):
The target `RISCV' does not exist.
It should be one of
AArch64;AMDGPU;ARM;BPF;Hexagon;Lanai;Mips;MSP430;NVPTX;PowerPC;Sparc;SystemZ;X86;XCore
-- Configuring incomplete, errors occurred!
See the thread
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20171211/509225.html
for discussion of this fix.
llvm-svn: 320556
In r319620, the host build was changed to use Native for
TARGETS_TO_BUILD because passing semicolons through add_custom_command
is surprisingly difficult. However, Native really doesn't make any
sense here, and it only works because we don't technically do any
codegen in the host tools so pretty well anything will "work".
The problem here is that passing something other than the correct
value is very fragile - as evidence note how the llvm-config in the
host tools acts differently than the target one now, and misreports
the targets to build. Similarly, if there is any logic conditional on
the targets in tablegen (now or in the future), it will do the wrong
thing.
To fix this, we need to escape the semicolons in the targets string
and pass it through to the child cmake invocation.
llvm-svn: 320413
In my build environment (cmake 3.6.1 and gcc 4.8.5 on CentOS 7), having
an empty CMAKE_SYSROOT in the cache results in --sysroot="" being passed
to all compile commands, and then the compiler errors out because of the
empty sysroot. Only set CMAKE_SYSROOT if non-empty to avoid this.
Differential Revision: https://reviews.llvm.org/D40934
llvm-svn: 320183
Summary:
r319898 made it possible to override these variables via the
CROSS_TOOLCHAIN_FLAGS setting, but this only worked if one explicitly
specifies these variables there. If, instead, one uses
CROSS_TOOLCHAIN_FLAGS to specify a toolchain file (as our internal
builds do, to point cmake to a checked-in toolchain), the
CMAKE_C(XX)_COMPILER flags would still win over the ones specified by
the toolchain file.
To fix is to make the mere presence of these flags overridable. I do
this by putting them as a default value for the CROSS_TOOLCHAIN_FLAGS
setting, so they can be overridden at cmake configuration time.
Reviewers: hintonda, beanz
Subscribers: bogner, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D40947
llvm-svn: 320138
The header include was required to work around PR19898, as noted in that
comment. That PR has since been marked resolved fixed, and the
configuration check passes without the header inclusion both when
compiling on Windows with cl and when cross-compiling on Linux using
clang-cl.
I noticed this because the inclusion was cased incorrectly (Intrin.h
instead of intrin.h), which when cross-compiling on a case sensitive
file system would cause the intrin.h from the Windows SDK to be included
(which LLVM can't handle) instead of the one from clang's resource
directory, making the check fail. This is the same issue as r309980.
Correcting the case of the inclusion makes the check pass when cross
compiling, but it seems better to get rid of the inclusion entirely,
since it appears to be unnecessary now.
Differential Revision: https://reviews.llvm.org/D40910
llvm-svn: 319917
they can be overridden when cross compiling.
Summary:
Since CROSS_TOOLCHAN_FLAGS can set CMAKE_(C|CXX)_COMPILER
variables, move the compiler variables up front so they can be
overridden.
This is a followup to https://reviews.llvm.org/D40229 committed in rL319620.
Thanks to Pavel Labath for reporting this issue.
Reviewers: labath, beanz
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D40896
llvm-svn: 319898
We currently use target_link_libraries without an explicit scope
specifier (INTERFACE, PRIVATE or PUBLIC) when linking executables.
Dependencies added in this way apply to both the target and its
dependencies, i.e. they become part of the executable's link interface
and are transitive.
Transitive dependencies generally don't make sense for executables,
since you wouldn't normally be linking against an executable. This also
causes issues for generating install export files when using
LLVM_DISTRIBUTION_COMPONENTS. For example, clang has a lot of LLVM
library dependencies, which are currently added as interface
dependencies. If clang is in the distribution components but the LLVM
libraries it depends on aren't (which is a perfectly legitimate use case
if the LLVM libraries are being built static and there are therefore no
run-time dependencies on them), CMake will complain about the LLVM
libraries not being in export set when attempting to generate the
install export file for clang. This is reasonable behavior on CMake's
part, and the right thing is for LLVM's build system to explicitly use
PRIVATE dependencies for executables.
Unfortunately, CMake doesn't allow you to mix and match the keyword and
non-keyword target_link_libraries signatures for a single target; i.e.,
if a single call to target_link_libraries for a particular target uses
one of the INTERFACE, PRIVATE, or PUBLIC keywords, all other calls must
also be updated to use those keywords. This means we must do this change
in a single shot. I also fully expect to have missed some instances; I
tested by enabling all the projects in the monorepo (except dragonegg),
and configuring both with and without shared libraries, on both Darwin
and Linux, but I'm planning to rely on the buildbots for other
configurations (since it should be pretty easy to fix those).
Even after this change, we still have a lot of target_link_libraries
calls that don't specify a scope keyword, mostly for shared libraries.
I'm thinking about addressing those in a follow-up, but that's a
separate change IMO.
Differential Revision: https://reviews.llvm.org/D40823
llvm-svn: 319840
The "x${...}" form was a workaround for CMake versions prior to 3.1,
where the if command would interpret arguments as variables even when
quoted [1]. We can drop the workaround now that our minimum CMake
version is 3.4.
[1] https://cmake.org/cmake/help/v3.1/policy/CMP0054.html
Differential Revision: https://reviews.llvm.org/D40744
llvm-svn: 319723
Using comma can break in cases when we're passing flags that already
use comma as a separator.
Fixes PR35504.
Differential Revision: https://reviews.llvm.org/D40761
llvm-svn: 319719
Also pass CMAKE_(C|CXX)_COMPILER to add_custom_command.
Summary:
Remove the redundant, config-time call to cmake when
building host tools for cross compiles or optimized tablegen..
The config-time call to cmake is redundant because it will always get
called again when the CONFIGURE_LLVM_${target_name} target fires at
build-time. This speeds up initial configuration, but has no affect
on build behavior.
Differential Revision: https://reviews.llvm.org/D40229
llvm-svn: 319620
Only pass Native to LLVM_TARGETS_TO_BUILD.
Summary:
Remove the redundant, config-time call to cmake when
building host tools for cross compiles or optimized tablegen..
The config-time call to cmake is redundant because it will always get
called again when the CONFIGURE_LLVM_${target_name} target fires at
build-time. This speeds up initial configuration, but has no affect
on build behavior.
Differential Revision: https://reviews.llvm.org/D40229
llvm-svn: 319574
CMake's generated installation scripts support `CMAKE_INSTALL_DO_STRIP`
to enable stripping the installed binaries. LLVM's build system doesn't
expose this option to the `install-` targets, but it's useful in
conjunction with `install-distribution`.
Add a new function to create the install targets, which creates both the
regular install target and a second install target that strips during
installation. Change the creation of all installation targets to use
this new function. Stripping doesn't make a whole lot of sense for some
installation targets (e.g. the LLVM headers), but consistency doesn't
hurt.
I'll make other repositories (e.g. clang, compiler-rt) use this in a
follow-up, and then add an `install-distribution-stripped` target to
actually accomplish the end goal of creating a stripped distribution. I
don't want to do that step yet because the creation of that target would
depend on the presence of the `install-*-stripped` target for each
distribution component, and the distribution components from other
repositories will be missing that target right now.
Differential Revision: https://reviews.llvm.org/D40620
llvm-svn: 319480
Modify add_sphinx_target() to include the project name alongside builder
in Sphinx doctree directory. This aims to avoid crashes due to race
conditions between multiple Sphinx instances running in parallel that
attempt to create or read that directory simultaneously.
This problem has originally been addressed in r283188. However, that
commit presumed that there will be only one target per builder being
run. However, r314863 introduced a second manpage target, reintroducing
the race condition.
Differential Revision: https://reviews.llvm.org/D40656
llvm-svn: 319461
Instead, reuse the code-path for cl.exe that adds /W4 , which for clang-cl
aliases clang's "-Wall -Wextra" which matches what clang-cl's /Wall
previously aliased.
This should restore the verbosity of a Windows selfhost build back to
its previous levels.
Differential Revision: https://reviews.llvm.org/D40603
llvm-svn: 319330
Summary:
Remove the redundant, config-time call to cmake when
building host tools for cross compiles or optimized tablegen..
The config-time call to cmake is redundant because it will always get
called again when the CONFIGURE_LLVM_${target_name} target fires at
build-time. This speeds up initial configuration, but has no affect
on build behavior.
Reviewers: beanz
Reviewed By: beanz
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D40229
llvm-svn: 319176
LLVM runtimes rely on LLVM_HOST_TRIPLE being set in their builds
and tests so make sure it's being passed down.
Differential Revision: https://reviews.llvm.org/D40515
llvm-svn: 319109
Prevent unloading shared libraries on Linux when dlclose() is called.
This is necessary since command-line option parsing API relies on
registering the global option instances in the option parser instance
which can be loaded in a different shared library.
Given that we can't reliably remove those options when a library is
unloaded, the parser ends up containing dangling references. Since glibc
has relatively complex library unloading rules, some of the LLVM
libraries can be unloaded while others (including the Support library)
stay loaded causing quite a mayhem. To reliably prevent that, just
forbid unloading all libraries -- it's a very bad idea anyway.
While the issue arguably happens only with BUILD_SHARED_LIBS, it may
affect any library reusing llvm::cl interface.
Based on patch provided Ross Hayward on https://bugs.gentoo.org/617154.
Previously hit by Fedora back in Feb 2016:
https://lists.freedesktop.org/archives/mesa-dev/2016-February/107242.html
Differential Revision: https://reviews.llvm.org/D40459
llvm-svn: 319105
Escaping ; in list arguments passed to ExternalProject_Add doesn't seem
to be working in newer versions of CMake (see
https://public.kitware.com/Bug/view.php?id=16137 for more details). Use
a custom LIST_SEPARATOR instead which is the officially supported way.
Differential Revision: https://reviews.llvm.org/D40232
llvm-svn: 319089
Prevent unloading shared libraries on Linux when dlclose() is called.
This is necessary since command-line option parsing API relies on
registering the global option instances in the option parser instance
which can be loaded in a different shared library.
Given that we can't reliably remove those options when a library is
unloaded, the parser ends up containing dangling references. Since glibc
has relatively complex library unloading rules, some of the LLVM
libraries can be unloaded while others (including the Support library)
stay loaded causing quite a mayhem. To reliably prevent that, just
forbid unloading all libraries -- it's a very bad idea anyway.
While the issue arguably happens only with BUILD_SHARED_LIBS, it may
affect any library reusing llvm::cl interface.
Based on patch provided Ross Hayward on https://bugs.gentoo.org/617154.
Previously hit by Fedora back in Feb 2016:
https://lists.freedesktop.org/archives/mesa-dev/2016-February/107242.html
Differential Revision: https://reviews.llvm.org/D40459
llvm-svn: 319069
In recent versions of Solaris 11.4 (previously 12), ld -V output went to
stdout instead of stderr. Since AddLLVM.cmake only expects it on stderr,
Solaris ld wasn't properly detected and options not understood by it are
passed during the build.
The following patch fixes this, allowing for both variants.
Tested on i386-pc-solaris2.11.4 (on top of D35755 which is needed for
proper Solaris support).
Patch by Rainer Orth.
Differential Revision: https://reviews.llvm.org/D39601
llvm-svn: 318532
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
