This is a temporary workaround for native arm linux builds:
PR18996: Changing regalloc order breaks "lencod" on native arm linux builds.
llvm-svn: 202433
For A- and R-class processors, r12 is not normally callee-saved, but is for
interrupt handlers. See AAPCS, 5.3.1.1, "Use of IP by the linker".
llvm-svn: 201089
Previously, we clobbered callee-saved registers when folding an "add
sp, #N" into a "pop {rD, ...}" instruction. This change checks whether
a register we're going to add to the "pop" could actually be live
outside the function before doing so and should fix the issue.
This should fix PR18081.
llvm-svn: 196046
(Currently, ARM 'this'-returns are handled in the standard calling convention case by treating R0 as preserved and doing some extra magic in LowerCallResult; this may not apply to calling conventions added in the future so this patch provides and documents an interface for indicating such)
llvm-svn: 185024
to TargetFrameLowering, where it belongs. Incidentally, this allows us
to delete some duplicated (and slightly different!) code in TRI.
There are potentially other layering problems that can be cleaned up
as a result, or in a similar manner.
The refactoring was OK'd by Anton Korobeynikov on llvmdev.
Note: this touches the target interfaces, so out-of-tree targets may
be affected.
llvm-svn: 175788
This provides the same functionality as getRawAllocationOrder() for the
even/odd hints, but without the many constant register arrays.
llvm-svn: 169169
registers. Previously, the register we being marked as implicitly defined, but
not killed. In some cases this would cause the register scavenger to spill a
dead register.
Also, use an empty register mask to simplify the logic and to reduce the memory
footprint.
rdar://12592448
llvm-svn: 167499
The getPointerRegClass() hook can return register classes that depend on
the calling convention of the current function (ptr_rc_tailcall).
So far, we have been able to infer the calling convention from the
subtarget alone, but as we add support for multiple calling conventions
per target, that no longer works.
Patch by Yiannis Tsiouris!
llvm-svn: 156328
on X86 Atom. Some of our tests failed because the tail merging part of
the BranchFolding pass was creating new basic blocks which did not
contain live-in information. When the anti-dependency code in the Post-RA
scheduler ran, it would sometimes rename the register containing
the function return value because the fact that the return value was
live-in to the subsequent block had been lost. To fix this, it is necessary
to run the RegisterScavenging code in the BranchFolding pass.
This patch makes sure that the register scavenging code is invoked
in the X86 subtarget only when post-RA scheduling is being done.
Post RA scheduling in the X86 subtarget is only done for Atom.
This patch adds a new function to the TargetRegisterClass to control
whether or not live-ins should be preserved during branch folding.
This is necessary in order for the anti-dependency optimizations done
during the PostRASchedulerList pass to work properly when doing
Post-RA scheduling for the X86 in general and for the Intel Atom in particular.
The patch adds and invokes the new function trackLivenessAfterRegAlloc()
instead of using the existing requiresRegisterScavenging().
It changes BranchFolding.cpp to call trackLivenessAfterRegAlloc() instead of
requiresRegisterScavenging(). It changes the all the targets that
implemented requiresRegisterScavenging() to also implement
trackLivenessAfterRegAlloc().
It adds an assertion in the Post RA scheduler to make sure that post RA
liveness information is available when it is needed.
It changes the X86 break-anti-dependencies test to use –mcpu=atom, in order
to avoid running into the added assertion.
Finally, this patch restores the use of anti-dependency checking
(which was turned off temporarily for the 3.1 release) for
Intel Atom in the Post RA scheduler.
Patch by Andy Zhang!
Thanks to Jakob and Anton for their reviews.
llvm-svn: 155395
Use information computed while inferring new register classes to emit
accurate, table-driven implementations of getMatchingSuperRegClass().
Delete the old manual, error-prone implementations in the targets.
llvm-svn: 146873
register dependency (rather than glue them together). This is general
goodness as it gives scheduler more freedom. However it is motivated by
a nasty bug in isel.
When a i64 sub is expanded to subc + sube.
libcall #1
\
\ subc
\ / \
\ / \
\ / libcall #2
sube
If the libcalls are not serialized (i.e. both have chains which are dag
entry), legalizer can serialize them in arbitrary orders. If it's
unlucky, it can force libcall #2 before libcall #1 in the above case.
subc
|
libcall #2
|
libcall #1
|
sube
However since subc and sube are "glued" together, this ends up being a
cycle when the scheduler combine subc and sube as a single scheduling
unit.
The right solution is to fix LegalizeType too chains the libcalls together.
However, LegalizeType is not processing nodes in order so that's harder than
it should be. For now, the move to physical register dependency will do.
rdar://10019576
llvm-svn: 138791
to MCRegisterInfo. Also initialize the mapping at construction time.
This patch eliminate TargetRegisterInfo from TargetAsmInfo. It's another step
towards fixing the layering violation.
llvm-svn: 135424
Also switch the return type to ArrayRef<unsigned> which works out nicely
for ARM's implementation of this function because of the clever ArrayRef
constructors.
The name change indicates that the returned allocation order may contain
reserved registers as has been the case for a while.
llvm-svn: 133216
The hook will be used by the register allocator when recomputing register
classes after removing constraints.
Thumb1 code doesn't allow anything larger than tGPR, and x86 needs to ensure
that the spill size doesn't change.
llvm-svn: 130228
Add a avoidWriteAfterWrite() target hook to identify register classes that
suffer from write-after-write hazards. For those register classes, try to avoid
writing the same register in two consecutive instructions.
This is currently disabled by default. We should not spill to avoid hazards!
The command line flag -avoid-waw-hazard can be used to enable waw avoidance.
llvm-svn: 129772
may be called. If the entry block is empty, the insertion point iterator will be
the "end()" value. Calling ->getParent() on it (among others) causes problems.
Modify materializeFrameBaseRegister to take the machine basic block and insert
the frame base register at the beginning of that block. (It's very similar to
what the code does all ready. The only difference is that it will always insert
at the beginning of the entry block instead of after a previous materialization
of the frame base register. I doubt that that matters here.)
<rdar://problem/8782198>
llvm-svn: 122104
Remove movePastCSLoadStoreOps and associated code for simple pointer
increments. Update routines that depended upon other opcodes for save/restore.
Adjust all testcases accordingly.
llvm-svn: 119725
functions in ARMBaseInfo.h so it can be used in the MC library as well.
For anything bigger than this, we may want a means to have a small support
library for shared helper functions like this. Cross that bridge when we
come to it.
llvm-svn: 114016
"For ARM stack frames that utilize variable sized objects and have either
large local stack areas or require dynamic stack realignment, allocate a
base register via which to access the local frame. This allows efficient
access to frame indices not accessible via the FP (either due to being out
of range or due to dynamic realignment) or the SP (due to variable sized
object allocation). In particular, this greatly improves efficiency of access
to spill slots in Thumb functions which contain VLAs."
r112986 fixed a latent bug exposed by the above.
llvm-svn: 112989
large local stack areas or require dynamic stack realignment, allocate a
base register via which to access the local frame. This allows efficient
access to frame indices not accessible via the FP (either due to being out
of range or due to dynamic realignment) or the SP (due to variable sized
object allocation). In particular, this greatly improves efficiency of access
to spill slots in Thumb functions which contain VLAs.
rdar://7352504
rdar://8374540
rdar://8355680
llvm-svn: 112883
