This commit adds debugging support for set types defined in languages
such as Pascal and Modula-2.
Patch by Peter McKinna!
Differential Revision: https://reviews.llvm.org/D76115
I think byval/sret and the others are close to being able to rip out
the code to support the missing type case. A lot of this code is
shared with inalloca, so catch this up to the others so that can
happen.
This patch adds a new llvm.experimental.stepvector intrinsic,
which takes no arguments and returns a linear integer sequence of
values of the form <0, 1, ...>. It is primarily intended for
scalable vectors, although it will work for fixed width vectors
too. It is intended that later patches will make use of this
new intrinsic when vectorising induction variables, currently only
supported for fixed width. I've added a new CreateStepVector
method to the IRBuilder, which will generate a call to this
intrinsic for scalable vectors and fall back on creating a
ConstantVector for fixed width.
For scalable vectors this intrinsic is lowered to a new ISD node
called STEP_VECTOR, which takes a single constant integer argument
as the step. During lowering this argument is set to a value of 1.
The reason for this additional argument at the codegen level is
because in future patches we will introduce various generic DAG
combines such as
mul step_vector(1), 2 -> step_vector(2)
add step_vector(1), step_vector(1) -> step_vector(2)
shl step_vector(1), 1 -> step_vector(2)
etc.
that encourage a canonical format for all targets. This hopefully
means all other targets supporting scalable vectors can benefit
from this too.
I've added cost model tests for both fixed width and scalable
vectors:
llvm/test/Analysis/CostModel/AArch64/neon-stepvector.ll
llvm/test/Analysis/CostModel/AArch64/sve-stepvector.ll
as well as codegen lowering tests for fixed width and scalable
vectors:
llvm/test/CodeGen/AArch64/neon-stepvector.ll
llvm/test/CodeGen/AArch64/sve-stepvector.ll
See this thread for discussion of the intrinsic:
https://lists.llvm.org/pipermail/llvm-dev/2021-January/147943.html
Count iterations of zero-trip loops and assert the count is zero,
rather than asserting inside the loop.
Unreachable functions should use llvm_unreachable.
Remove tautological 'if' statements, even when they're following a
pattern of checks.
Found by the Rotten Green Tests project.
Fixed section of code that iterated through a SmallDenseMap and added
instructions in each iteration, causing non-deterministic code; replaced
SmallDenseMap with MapVector to prevent non-determinism.
This reverts commit 01ac6d1587e8613ba4278786e8341f8b492ac941.
This caused non-deterministic compiler output; see comment on the
code review.
> This patch updates the various IR passes to correctly handle dbg.values with a
> DIArgList location. This patch does not actually allow DIArgLists to be produced
> by salvageDebugInfo, and it does not affect any pass after codegen-prepare.
> Other than that, it should cover every IR pass.
>
> Most of the changes simply extend code that operated on a single debug value to
> operate on the list of debug values in the style of any_of, all_of, for_each,
> etc. Instances of setOperand(0, ...) have been replaced with with
> replaceVariableLocationOp, which takes the value that is being replaced as an
> additional argument. In places where this value isn't readily available, we have
> to track the old value through to the point where it gets replaced.
>
> Differential Revision: https://reviews.llvm.org/D88232
This reverts commit df69c69427dea7f5b3b3a4d4564bc77b0926ec88.
This parallels ConstantDataArray::getRaw() and can be used with ConstantDataSequential::getRawDataValues() in the base class for both types.
Update BuildConstantData{Array,Vector} tests to test the getRaw API. Also removes its unused Module.
In passing, update some comments to include the support for half and bfloat. Update tests to include testing for bfloat.
Differential Revision: https://reviews.llvm.org/D98302
The LiveDebugValues and LiveDebugVariables implementations for handling
DBG_VALUE_LIST instructions can be simplified significantly if they do not have
to deal with any duplicated operands, such as a DBG_VALUE_LIST that uses the
same register multiple times in its expression. This patch adds a function,
replaceArg, that can be used to simplify a DIExpression in the case of
duplicated operands.
Differential Revision: https://reviews.llvm.org/D83896
This patch updates the various IR passes to correctly handle dbg.values with a
DIArgList location. This patch does not actually allow DIArgLists to be produced
by salvageDebugInfo, and it does not affect any pass after codegen-prepare.
Other than that, it should cover every IR pass.
Most of the changes simply extend code that operated on a single debug value to
operate on the list of debug values in the style of any_of, all_of, for_each,
etc. Instances of setOperand(0, ...) have been replaced with with
replaceVariableLocationOp, which takes the value that is being replaced as an
additional argument. In places where this value isn't readily available, we have
to track the old value through to the point where it gets replaced.
Differential Revision: https://reviews.llvm.org/D88232
This patch adds a new metadata node, DIArgList, which contains a list of SSA
values. This node is in many ways similar in function to the existing
ValueAsMetadata node, with the difference being that it tracks a list instead of
a single value. Internally, it uses ValueAsMetadata to track the individual
values, but there is also a reasonable amount of DIArgList-specific
value-tracking logic on top of that. Similar to ValueAsMetadata, it is a special
case in parsing and printing due to the fact that it requires a function state
(as it may reference function-local values).
This patch should not result in any immediate functional change; it allows for
DIArgLists to be parsed and printed, but debug variable intrinsics do not yet
recognize them as a valid argument (outside of parsing).
Differential Revision: https://reviews.llvm.org/D88175
When one of the inputs is a wrapping range, intersect with the
union of the two inputs. The union of the two inputs corresponds
to the result we would get if we treated the min/max as a simple
select.
This fixes PR48643.
We don't need any special handling for wrapping ranges (or empty
ranges for that matter). The sub() call will already compute a
correct and precise range.
We only need to adjust the test expectation: We're now computing
an optimal result, rather than an unsigned envelope.
When the optimality check fails, print the inputs, the computed
range and the better range that was found. This makes it much
simpler to identify the cause of the failure.
Make sure that full ranges (which, unlikely all the other cases,
have multiple ways to construct them that all result in the same
range) only print one message by handling them separately.
The current infrastructure for exhaustive ConstantRange testing is
somewhat confusing in what exactly it tests and currently cannot even
be used for operations that produce smallest-size results, rather than
signed/unsigned envelopes.
This patch makes the testing more principled by collecting the exact
set of results of an operation into a bit set and then comparing it
against the range approximation by:
* Checking conservative correctness: All elements in the set must be
in the range.
* Checking optimality under a given preference function: None of the
(slack-free) ranges that can be constructed from the set are
preferred over the computed range.
Implemented preference functions are:
* PreferSmallest: Smallest range regardless of signed/unsigned wrapping
behavior. Probably what we would call "optimal" without further
qualification.
* PreferSmallestUnsigned/Signed: Smallest range that has no
unsigned/signed wrapping. We use this if our calculation is precise
only up to signed/unsigned envelope.
* PreferSmallestNonFullUnsigned/Signed: Smallest range that has no
unsigned/signed wrapping -- but preferring a smaller wrapping range
over a (non-wrapping) full range. We use this if we have a fully
precise calculation but apply a sign preference to the result
(union/intersection). Even with a sign preference, returning a
wrapping range is still "strictly better" than returning a full one.
This also addresses PR49273 by replacing the fragile manual range
construction logic in testBinarySetOperationExhaustive() with generic
code that isn't specialized to the particular form of ranges that set
operations can produces.
Differential Revision: https://reviews.llvm.org/D88356
To set non-default rounding mode user usually calls function 'fesetround'
from standard C library. This way has some disadvantages.
* It creates unnecessary dependency on libc. On the other hand, setting
rounding mode requires few instructions and could be made by compiler.
Sometimes standard C library even is not available, like in the case of
GPU or AI cores that execute small kernels.
* Compiler could generate more effective code if it knows that a particular
call just sets rounding mode.
This change introduces new IR intrinsic, namely 'llvm.set.rounding', which
sets current rounding mode, similar to 'fesetround'. It however differs
from the latter, because it is a lower level facility:
* 'llvm.set.rounding' does not return any value, whereas 'fesetround'
returns non-zero value in the case of failure. In glibc 'fesetround'
reports failure if its argument is invalid or unsupported or if floating
point operations are unavailable on the hardware. Compiler usually knows
what core it generates code for and it can validate arguments in many
cases.
* Rounding mode is specified in 'fesetround' using constants like
'FE_TONEAREST', which are target dependent. It is inconvenient to work
with such constants at IR level.
C standard provides a target-independent way to specify rounding mode, it
is used in FLT_ROUNDS, however it does not define standard way to set
rounding mode using this encoding.
This change implements only IR intrinsic. Lowering it to machine code is
target-specific and will be implemented latter. Mapping of 'fesetround'
to 'llvm.set.rounding' is also not implemented here.
Differential Revision: https://reviews.llvm.org/D74729
This patch
- Adds containsPoisonElement that checks existence of poison in constant vector elements,
- Renames containsUndefElement to containsUndefOrPoisonElement to clarify its behavior & updates its uses properly
With this patch, isGuaranteedNotToBeUndefOrPoison's tests w.r.t constant vectors are added because its analysis is improved.
Thanks!
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D94053
As mentioned in D93793, there are quite a few places where unary `IRBuilder::CreateShuffleVector(X, Mask)` can be used
instead of `IRBuilder::CreateShuffleVector(X, Undef, Mask)`.
Let's update them.
Actually, it would have been more natural if the patches were made in this order:
(1) let them use unary CreateShuffleVector first
(2) update IRBuilder::CreateShuffleVector to use poison as a placeholder value (D93793)
The order is swapped, but in terms of correctness it is still fine.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D93923
The main change is to add a 'IsDecl' field to DIModule so
that when IsDecl is set to true, the debug info entry generated
for the module would be marked as a declaration. That way, the debugger
would look up the definition of the module in the gloabl scope.
Please see the comments in llvm/test/DebugInfo/X86/dimodule.ll
for what the debug info entries would look like.
Differential Revision: https://reviews.llvm.org/D93462
Per http://llvm.org/OpenProjects.html#llvm_loopnest, the goal of this
patch (and other following patches) is to create facilities that allow
implementing loop nest passes that run on top-level loop nests for the
New Pass Manager.
This patch extends the functionality of LoopPassManager to handle
loop-nest passes by specializing the definition of LoopPassManager that
accepts both kinds of passes in addPass.
Only loop passes are executed if L is not a top-level one, and both
kinds of passes are executed if L is top-level. Currently, loop nest
passes should have the following run method:
PreservedAnalyses run(LoopNest &, LoopAnalysisManager &,
LoopStandardAnalysisResults &, LPMUpdater &);
Reviewed By: Whitney, ychen
Differential Revision: https://reviews.llvm.org/D87045
This makes it slightly easier to deal with custom attributes and
CallBase already provides hasFnAttr versions that support both AttrKind
and StringRef arguments in a similar fashion.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D92567
phi-empty.ll does not pass under the new PM because the NPM runs
-loop-simplify. Running -loop-simplify ends up not reproing
https://llvm.org/PR48296.
Verified that this test fails when 9eb2c011 is reverted.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D92807
It was removed back in 2013 (f63dfbb) by Matt Arsenault but then
reverted since DragonEgg used it, but that project is no longer
maintained.
Reviewed By: ldionne, dexonsmith
Differential Revision: https://reviews.llvm.org/D92571
Shuffle mask for concat can't be expressed for scalable vectors, so we
should bail out. A test has been added that previously crashed, also
tested isIdentityWithPadding and isIdentityWithExtract where we already
bail out.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D92475
Since the length of the llvm::SmallVector shufflemask is related to the
minimum number of elements in a scalable vector, it is fine to just get
the Min field of the ElementCount. This is already done for the similar
function changesLength, tests have been added for both.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D92472
It's not possible to express an extract subvector shuffle mask for
a scalable vector.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D92312
Revert "Delete llvm::is_trivially_copyable and CMake variable HAVE_STD_IS_TRIVIALLY_COPYABLE"
This reverts commit 4d4bd40b578d77b8c5bc349ded405fb58c333c78.
This reverts commit 557b00e0afb2dc1776f50948094ca8cc62d97be4.
Typically branch_weights are i32, not i64.
This fixes entry_counts_cold.ll under NPM.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D90539
This is similar to the existing alloca and program address spaces (D37052)
and should be used when creating/accessing global variables.
We need this in our CHERI fork of LLVM to place all globals in address space 200.
This ensures that values are accessed using CHERI load/store instructions
instead of the normal MIPS/RISC-V ones.
The problem this is trying to fix is that most of the time the type of
globals is created using a simple PointerType::getUnqual() (or ::get() with
the default address-space value of 0). This does not work for us and we get
assertion/compilation/instruction selection failures whenever a new call
is added that uses the default value of zero.
In our fork we have removed the default parameter value of zero for most
address space arguments and use DL.getProgramAddressSpace() or
DL.getGlobalsAddressSpace() whenever possible. If this change is accepted,
I will upstream follow-up patches to use DL.getGlobalsAddressSpace() instead
of relying on the default value of 0 for PointerType::get(), etc.
This patch and the follow-up changes will not have any functional changes
for existing backends with the default globals address space of zero.
A follow-up commit will change the default globals address space for
AMDGPU to 1.
Reviewed By: dylanmckay
Differential Revision: https://reviews.llvm.org/D70947
The design of the PreservedCFG Checker (landed with the commit
28012e00d80b9) has a fundamental flaw which makes it incorrect.
The checker is based on the PreservedAnalyses result returned
by functional passes: if CFGAnalyses is in the returned
PreservedAnalyses set, then the checker asserts that the CFG
snapshot saved before the pass is equal to the CFG snapshot
taken after the the pass. The problem is in passes that change
CFG and invalidate CFGAnalyses on their own. Such passes do not
return CFGanalyses in the returned PreservedAnalyses. So the
checker mistakenly expects CFG unchanged. As an example see the
class TestSimplifyCFGInvalidatingAnalysisPass in the new tests.
It is interesting that the bug was not found in LLVM. That is
because the CFG checker ran only if CFGAnalyses was checked
incorrectly:
if (!PassPA.allAnalysesInSetPreserved<CFGAnalyses>())
return;
but must be checked as follows:
auto PAC = PA.getChecker<PreservedCFGCheckerAnalysis>();
if (!(PAC.preserved() ||
PAC.preservedSet<AllAnalysesOn<Function>>() ||
PAC.preservedSet<CFGAnalyses>())
return;
A fully redesigned checker will be sent as a separate follow-up
patch.
Reviewed By: Serguei Katkov, Jakub Kuderski
Differential Revision: https://reviews.llvm.org/D91324
This patch adds a new matcher for single index InsertValue instructions,
similar to the existing matcher for ExtractValue.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D91352
