In an example like "clang -fxray-instrument .." the .. could be confused
with a literal .. (parent directory), which is used in commands like
"cmake -GNinja .."
llvm-svn: 327000
llvm-mca is an LLVM based performance analysis tool that can be used to
statically measure the performance of code, and to help triage potential
problems with target scheduling models.
llvm-mca uses information which is already available in LLVM (e.g. scheduling
models) to statically measure the performance of machine code in a specific cpu.
Performance is measured in terms of throughput as well as processor resource
consumption. The tool currently works for processors with an out-of-order
backend, for which there is a scheduling model available in LLVM.
The main goal of this tool is not just to predict the performance of the code
when run on the target, but also help with diagnosing potential performance
issues.
Given an assembly code sequence, llvm-mca estimates the IPC (instructions per
cycle), as well as hardware resources pressure. The analysis and reporting style
were mostly inspired by the IACA tool from Intel.
This patch is related to the RFC on llvm-dev visible at this link:
http://lists.llvm.org/pipermail/llvm-dev/2018-March/121490.html
Differential Revision: https://reviews.llvm.org/D43951
llvm-svn: 326998
- Improve description of XNACK ELF flag.
- Rename all uses of wave to wavefront to be consistent.
Differential Revision: https://reviews.llvm.org/D43983
llvm-svn: 326989
Summary:
Distinguish two relationships between types: is-a and convertible-to.
For example, a bit is not an int or vice versa, but they can be
converted into each other (with range checks that you can think of
as "dynamic": unlike other type checks, those range checks do not
happen during parsing, but only once the final values have been
established).
Actually converting initializers between types is subtle: even
when values of type A can be converted to type B (e.g. int into
string), it may not be possible to do so with a concrete initializer
(e.g., a VarInit that refers to a variable of type int cannot
be immediately converted to a string).
For this reason, distinguish between getCastTo and convertInitializerTo:
the latter implements the actual conversion when appropriate, while
the former will first try to do the actual conversion and fall back
to introducing a !cast operation so that the conversion will be
delayed until variable references have been resolved.
To make the approach of adding !cast operations to work, !cast needs
to fallback to convertInitializerTo when the special string <-> record
logic does not apply.
This enables casting records to a subclass, although that new
functionality is only truly useful together with !isa, which will be
added in a later change.
The test is removed because it uses !srl on a bit sequence,
which cannot really be supported consistently, but luckily
isn't used anywhere either.
Change-Id: I98168bf52649176654ed2ec61a29bdb29970cfe7
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43753
llvm-svn: 326785
Summary:
This changes the syntax of !foreach so that the first "parameter" is
a new syntactic variable: !foreach(x, lst, expr) will define the
variable x within the scope of expr, and evaluation of the !foreach
will substitute elements of the given list (or dag) for x in expr.
Aside from leading to a nicer syntax, this allows more complex
expressions where x is deeply nested, or even constant expressions
in which x does not occur at all.
!foreach is currently not actually used anywhere in trunk, but I
plan to use it in the AMDGPU backend. If out-of-tree targets are
using it, they can adjust to the new syntax very easily.
Change-Id: Ib966694d8ab6542279d6bc358b6f4d767945a805
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits, tpr
Differential Revision: https://reviews.llvm.org/D43651
llvm-svn: 326705
Adrian Sampson's blog post provides a good and relatively up-do-date
introduction to LLVM. I think this post could be helpful for people wanting
to get started with LLVM.
Reviewers: asb, tonic, silvas, probinson, kristof.beyls, rengolin
Reviewed By: rengolin
Differential Revision: https://reviews.llvm.org/D42904
llvm-svn: 326576
Add a `LLVM_INSTALL_CCTOOLS_SYMLINKS` to mirror
`LLVM_INSTALL_BINUTILS_SYMLINKS`. For now, this allows us to create
symlinks for `dsymutil` to `llvm-dsymutil`. This option is off by
default, but the user can enable it.
llvm-svn: 326381
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
Summary:
Returns the size of a list. I have found this to be rather useful in some
development for the AMDGPU backend where we could simplify our .td files
by concatenating list<LLVMType> for complex intrinsics. Doing so requires
us to compute the position argument for LLVMMatchType.
Basically, the usage is in a pattern that looks somewhat like this:
list<LLVMType> argtypes =
!listconcat(base,
[llvm_any_ty, LLVMMatchType<!size(base)>]);
Change-Id: I360a0b000fd488d18bea412228230fd93722bd2c
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits, tpr
Differential Revision: https://reviews.llvm.org/D43553
llvm-svn: 325883
Summary:
This adds initial support for letting targets specify which address
spaces their functions should reside in by default.
If a function is created by a frontend, it will get the default address space specified in the DataLayout, unless the frontend explicitly uses a more general `llvm::Function` constructor. Function address spaces will become a part of the bitcode and textual IR forms, as we do not have access to a data layout whilst parsing LL.
It will be possible to write IR that explicitly has `addrspace(n)` on a function. In this case, the function will reside in the specified space, ignoring the default in the DL.
This is the first step towards placing functions into the correct
address space for Harvard architectures.
Full patchset
* Add program address space to data layout D37052
* Require address space to be specified when creating functions D37054
* [clang] Require address space to be specified when creating functions D37057
Reviewers: pcc, arsenm, kparzysz, hfinkel, theraven
Reviewed By: theraven
Subscribers: arichardson, simoncook, rengolin, wdng, uabelho, bjope, asb, llvm-commits
Differential Revision: https://reviews.llvm.org/D37052
llvm-svn: 325479
Summary:
In LLVM, 't' selects a floating-point/SIMD register and only supports
32-bit values. This is appropriately documented in the LLVM Language
Reference Manual. However, this behaviour diverges from that of GCC, where
't' selects the s0-s31 registers and its qX and dX variants depending on
additional operand modifiers (q/P).
For example, the following C code:
#include <arm_neon.h>
float32x4_t a, b, x;
asm("vadd.f32 %0, %1, %2" : "=t" (x) : "t" (a), "t" (b))
results in the following assembly if compiled with GCC:
vadd.f32 s0, s0, s1
whereas LLVM will show "error: couldn't allocate output register for
constraint 't'", since a, b, x are 128-bit variables, not 32-bit.
This patch extends the use of 't' to mean that of GCC, thus allowing
selection of the lower Q vector regs and their D/S variants. For example,
the earlier code will now compile as:
vadd.f32 q0, q0, q1
This behaviour still differs from that of GCC but I think it is actually
more correct, since LLVM picks up the right register type based on the
datatype of x, while GCC would need an extra operand modifier to achieve
the same result, as follows:
asm("vadd.f32 %q0, %q1, %q2" : "=t" (x) : "t" (a), "t" (b))
Since this is only an extension of functionality, existing code should not
be affected by this change. Note that operand modifiers q/P are already
supported by LLVM, so this patch should suffice to support inline
assembly with constraint 't' originally built for GCC.
Reviewers: grosbach, rengolin
Reviewed By: rengolin
Subscribers: rogfer01, efriedma, olista01, aemerson, javed.absar, eraman, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42962
llvm-svn: 325244
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
llvm-svn: 325102
This commit attempts to re-land the r324480 which was reverted in
r324493 because it broke the Windows bots. For now I disabled the two
update tests on Windows until I'm able to debug this.
Differential revision: https://reviews.llvm.org/D42880
llvm-svn: 324592
Note: This is a candidate for LLVM 6.0, because it was planned to be
in that release but was delayed due to a long review period.
Merge conflict in release_60 - resolution:
Add "-p6:32:32" into the second (non-amdgiz) string.
Only scalar loads support 32-bit pointers. An address in a VGPR will
fail to compile. That's OK because the results of loads will only be used
in places where VGPRs are forbidden.
Updated AMDGPUAliasAnalysis and used SReg_64_XEXEC.
The tests cover all uses cases we need for Mesa.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D41651
llvm-svn: 324487
Now that dsymutil can generate accelerator tables, we can upstream the
update logic that, as the name implies, updates the accelerator tables
in an existing dSYM bundle. In combination with `-minimize` this can be
used to remove redundant .debug_(inlines|pubtypes|pubnames).
Differential revision: https://reviews.llvm.org/D42880
llvm-svn: 324480
Summary:
The signatures for the builtins @llvm.memcpy, @llvm.memmove, and @llvm.memset
where changed in rL322965. The number of arguments has decreased from five to
four with the removal of the alignment argument. Alignment is now conveyed
by supplying the align parameter attribute on the destination and/or source of
the cpy/move/set.
llvm-svn: 324265
(I suppose these two pieces could be separated - but seemed related
enough)
As discussed on llvm-dev, this documents the general expectation of how
library layering should be handled. There are a few existing cases where
these constraints are not met, but as with most style guide things -
this is forward looking and provides guidance when cleaning up existing
code, it doesn't immediately require that all previous code be cleaned
up to match. (see: naming conventions, etc)
Differential Revision: https://reviews.llvm.org/D42771
llvm-svn: 324004
"path" is too generic name for -L or --library-path because a lot of
linker options take paths as arguments. This change renames the option
to avoid confusion.
Differential Revision: https://reviews.llvm.org/D42705
llvm-svn: 323833
- If ReqdWorkGroupSize is present it must have all elements >=1.
- If MaxFlatWorkGroupSize must be consistent with ReqdWorkGroupSize.
- Remove FixedWorkGroupSize as now equivalent to ReqdWorkGroupSize.
llvm-svn: 323829
Passing -minimize to dsymutil prevents the emission of .debug_inlines,
.debug_pubnames, and .debug_pubtypes in favor of the Apple accelerator
tables.
The actual check in the DWARF linker was added in r323655. This patch
simply enables it.
Differential revision: https://reviews.llvm.org/D42688
llvm-svn: 323812
Introduce an extension to support passing linker options to the linker.
These would be ignored by older linkers, but newer linkers which support
this feature would be able to process the linker.
Emit a special discarded section `.linker-option`. The content of this
section is a pair of strings (key, value). The key is a type identifier for
the parameter. This allows for an argument free parameter that will be
processed by the linker with the value being the parameter. As an example,
`lib` identifies a library to be linked against, traditionally the `-l`
argument for Unix-based linkers with the parameter being the library name.
Thanks to James Henderson, Cary Coutant, Rafael Espinolda, Sean Silva
for the valuable discussion on the design of this feature.
llvm-svn: 323783
Summary: This is a simple change to test commit access with.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42586
llvm-svn: 323544
Combine expression patterns to form expressions with fewer, simple instructions.
This pass does not modify the CFG.
For example, this pass reduce width of expressions post-dominated by TruncInst
into smaller width when applicable.
It differs from instcombine pass in that it contains pattern optimization that
requires higher complexity than the O(1), thus, it should run fewer times than
instcombine pass.
Differential Revision: https://reviews.llvm.org/D38313
llvm-svn: 323321
Summary:
This patch extends the DISubrange 'count' field to take either a
(signed) constant integer value or a reference to a DILocalVariable
or DIGlobalVariable.
This is patch [1/3] in a series to extend LLVM's DISubrange Metadata
node to support debugging of C99 variable length arrays and vectors with
runtime length like the Scalable Vector Extension for AArch64. It is
also a first step towards representing more complex cases like arrays
in Fortran.
Reviewers: echristo, pcc, aprantl, dexonsmith, clayborg, kristof.beyls, dblaikie
Reviewed By: aprantl
Subscribers: rnk, probinson, fhahn, aemerson, rengolin, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D41695
llvm-svn: 323313
Summary:
This is the first attempt to write down a guideline on adding exception handling support for a target. The content basically bases on the discussion on [1]. If you guys know who is exception handling expert, please add him as the reviewer. Thanks.
[1] http://lists.llvm.org/pipermail/llvm-dev/2018-January/120405.html
Reviewers: t.p.northover, theraven, nemanjai
Reviewed By: theraven
Subscribers: sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D42178
llvm-svn: 323311
