This dependency was removed in r357486, which has lead to a stream of difficult to diagnose bugs.
Without this dependency, when building with `LLVM_OPTIMIZED_TABLEGEN=On` the native tablegen executible may not be rebuilt at all, and often won't get rebuilt before targets that use the tablegen headers. In the best case this results in a build-time failure, in the worst case it results in runtime failures.
llvm-svn: 367895
Summary: The minimum compilers support all have alignas, and we don't use LLVM_ALIGNAS anywhere anymore. This also removes an MSVC diagnostic which, according to the comment above, isn't relevant anymore.
Reviewers: rnk
Subscribers: mgorny, jkorous, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65458
llvm-svn: 367383
This is the compantion patch to https://reviews.llvm.org/D64482, needed to ensure
that builds with host compilers that don't yet predefine _FILE_OFFSET_BITS=64 on
Solaris succeed by always making the host and freshly built clang consistent.
Tested on x86_64-pc-solaris2.11.
Differential Revision: https://reviews.llvm.org/D64483
llvm-svn: 367304
Like other ELF targets, shared objects should be linked with -z defs on Solaris.
Tested on x86_64-pc-solaris2.11 and sparcv9-sun-solaris2.11.
Differential Revision: https://reviews.llvm.org/D64484
llvm-svn: 366821
There were two main problems:
* The 'nativecodegen' pseudo-component was unconditionally adding
${native_tgt}CodeGen even though it conditionally added ${native_tgt}Info and
${native_tgt}Desc. This has been fixed by making ${native_tgt}CodeGen
conditional too
* The 'all' pseudo-component was causing library names like LLVMLLVMDemangle as
the expansion was to a library name and not a component. There doesn't seem to
be a list of available components anywhere so this has been fixed by moving the
expansion of 'all' back where it was before. This manifested in different ways
on different builders but it was the same root cause
llvm-svn: 366622
Some targets are missing LLVMDemangle, one is adding the LLVM prefix twice, and two
are hitting the very error this patch fixes for my target. Reverting while I work
through the reports.
llvm-svn: 366615
I believe this to have been a latent bug as the same expansion checks for the
existence of ${native_tgt}Info and ${native_tgt}Desc and only adds them if
they were compiled but unconditionally adds ${native_tgt}CodeGen.
This should fix llvm-clang-x86_64-win-fast which builds ARM only on an X86 host and similar builders.
llvm-svn: 366612
Summary:
If you use pseudo-targets like AllTargetsCodeGens in LLVM_DYLIB_COMPONENTS
then a test will fail because `./bin/llvm-config --shared-mode` can't
handle these targets. We can fix this by expanding them before embedding
the string into llvm-config
Reviewers: bogner
Reviewed By: bogner
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65011
llvm-svn: 366610
lldb recently added a tablegen tool. In order to properly cross compile
lldb standalone there needs to be a mechanism to generate the native
lldb build, analgous to what's done for the NATIVE llvm build. Thus,
we can simply modify this setup to allow for any project to be used.
llvm-svn: 366514
Summary:
Other platforms don't have the capability to perform llvm_codesign
step. If LLVM_CODESIGNING_IDENTITY is set then this chunk of code would
attempt to codesign if the target was Apple. But when cross compiling
to Darwin from Linux, for example, this step would fail. So test if the
host is Apple as well.
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64942
llvm-svn: 366498
Summary:
This is a follow up to D64032. Afterwards if building utils is disabled
and cross compilation is attempted, CMake will complain that adding
`install()` directives to targets with EXCLUDE_FROM_ALL set is "undefined".
Indeed, it appears depending on the CMake version and the selected
Generator, the install rule will error because the underlying target isn't
built. Fix that by not adding the install rule if building utils is not
requested. Note that this doesn't prevent building tblgen as a
dependency in not cross-build, even if building tools is disabled.
Reviewed By: smeenai
Differential Revision: https://reviews.llvm.org/D64225
llvm-svn: 366108
Summary:
This will simplify the macros by allowing us to remove the hard-coded
list of libraries that should be installed when
LLVM_INSTALL_TOOLCHAIN_ONLY is enabled.
Reviewers: beanz, smeenai
Reviewed By: beanz
Subscribers: aheejin, mehdi_amini, mgorny, steven_wu, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64580
llvm-svn: 365902
Summary:
CMake+Xcode doesn't seem to handle targets that only have object
sources. This patch works around that limitation by adding a dummy
soruce file to any library target that is generated by llvm_add_library
when object libraries are generated.
Object libraries are generated whenever llvm_add_library is passed more
than one library type, which is now the default case for clang static
libraries (which generate STATIC and OBJECT libraries).
Reviewers: zturner, compnerd, joanlluch
Reviewed By: joanlluch
Subscribers: joanlluch, xbolva00, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64300
llvm-svn: 365365
Summary:
In cross mode, we build a separate NATIVE tblgen that runs on the
host and is used during the build. Separately, we have a flag that
disables building all executables in utils/. Of course generally,
this doesn't turn off tblgen, since we need that during the build.
In cross mode, however, that tblegen is useless since we never
actually use it. Furthermore, it can be actively problematic if the
cross toolchain doesn't like building executables for whatever reason.
And even if building executables works fine, we can at least save
compile time by omitting it from the target build. There's two changes
needed to make this happen:
- Stop creating a dependency from the native tool to the target tool.
No such dependency is required for a correct build, so I'm not entirely
sure why it was there in the first place.
- If utils were disabled on the CMake command line and we're in cross mode,
respect that by excluding it from the install target (using EXCLUDE_FROM_ALL).
Reviewers: smeenai
Differential Revision: https://reviews.llvm.org/D64032
llvm-svn: 364872
Summary:
With r363420, config.guess can no longer be run with MSYS on Windows and this
patch should be able to fix this particular case.
Reviewers: compnerd
Reviewed By: compnerd
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63834
llvm-svn: 364485
This is a follow up to D56781, D56774 and D35077 to makes the LLVM-C.dll
file and LLVM-C.lib be installed on Windows, just like LTO.dll and
LTO.lib are.
Patch by Jakob Bornecrantz!
Differential revision: https://reviews.llvm.org/D63717
llvm-svn: 364275
Summary:
Specify message levels in CMake. Prefer STATUS (stdout).
As the default message mode (i.e. level) is NOTICE in CMake, more then necessary messages get printed to stderr. Some tools, noticably ccmake treat this as an error and require additional confirmation and re-running CMake's configuration step.
This commit specifies a mode (either STATUS or WARNING or FATAL_ERROR) instead of the default.
* I used `csearch -f 'llvm-project/.+(CMakeLists\.txt|cmake)' -l 'message\("'` to find all locations.
* Reviewers were chosen by the most common authors of specific files. If there are more suitable reviewers for these CMake changes, please let me know.
Patch by: Christoph Siedentop
Reviewers: zturner, beanz, xiaobai, kbobyrev, lebedev.ri, sgraenitz
Reviewed By: sgraenitz
Subscribers: mgorny, lebedev.ri, #sanitizers, lldb-commits, llvm-commits
Tags: #sanitizers, #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D63370
llvm-svn: 363821
This extracts the LLVM distribution target handling into a support module.
Extraction will enable us to restructure the builds to support multiple
distribution configurations (e.g. developer and user) to permit us to build the
development package and the user package at once.
llvm-svn: 363440
When cross-compiling LLVM to android from Windows (for LLVMSupport), we would
attempt to execute `config.guess` to determine the host triple since
`CMAKE_SYSTEM_NAME` is not Windows and `CMAKE_C_COMPILER` will be set to GNU or
Clang. This will fail as `config.guess` is a shell script which cannot be
executed on Windows. Simply log a warning instead. The user can specify the
value for this instead in those cases.
llvm-svn: 363420
Summary:
It is useful to build with _XOPEN_SOURCE defined on AIX, enabling X/Open
and POSIX compatibility mode, to work around stray macros and other
bugs in the headers provided by the system and build compiler.
This patch adds the config to cmake to build with _XOPEN_SOURCE defined
on AIX with a few exceptions. Google Test internals require access to
platform specific thread info constructs on AIX so in that case we build
with _ALL_SOURCE defined instead. Libclang also uses header which needs
_ALL_SOURCE on AIX so we leave that as is as well.
We also add building on AIX with the large file API and doing CMake
header checks with X/OPEN definitions so the results are consistent with
the environment that will be present in the build.
Reviewers: hubert.reinterpretcast, xingxue, andusy
Reviewed By: hubert.reinterpretcast
Subscribers: mgorny, jsji, cfe-commits, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D62533
llvm-svn: 362808
Summary: Useful info for standalone builds of subprojects. If a multi-configuration generator was used for the provided LLVM build-tree, standalone builds should consider actual subdirectories per configuration in `find_program()` (e.g. looking for `llvm-lit` or `llvm-tblgen`).
Reviewers: labath, beanz, mgorny
Subscribers: lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62878
llvm-svn: 362588
Add `nm` and `objcopy` to the default value for the tools that we install now
that they are sufficiently feature complete to replace bintuils' implementation.
Patch by Jiang Yi!
llvm-svn: 362425
Recommit of r361790 that was temporarily reverted in r361793 due to bot breakage.
Summary:
The following changes were required to fix these tests:
1) Change LLVM_ENABLE_PLUGINS to an option and move it to
llvm/CMakeLists.txt with an appropriate default -- which matches
the original default behavior.
2) Move the plugins directory from clang/test/Analysis
clang/lib/Analysis. It's not enough to add an exclude to the
lit.local.cfg file because add_lit_testsuites recurses the tree and
automatically adds the appropriate `check-` targets, which don't
make sense for the plugins because they aren't tests and don't
have `RUN` statements.
Here's a list of the `clang-check-anlysis*` targets with this
change:
```
$ ninja -t targets all| sed -n "s/.*\/\(check[^:]*\):.*/\1/p" | sort -u | grep clang-analysis
check-clang-analysis
check-clang-analysis-checkers
check-clang-analysis-copypaste
check-clang-analysis-diagnostics
check-clang-analysis-engine
check-clang-analysis-exploration_order
check-clang-analysis-html_diagnostics
check-clang-analysis-html_diagnostics-relevant_lines
check-clang-analysis-inlining
check-clang-analysis-objc
check-clang-analysis-unified-sources
check-clang-analysis-z3
```
3) Simplify the logic and only include the subdirectories under
clang/lib/Analysis/plugins if LLVM_ENABLE_PLUGINS is set.
Reviewed By: NoQ
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62445
llvm-svn: 362328
LLVM CMake build already uses libtool instead of ar when building
for Apple platform and we should be using the same when building
runtimes. To do so, this change extracts the logic for finding
libtool into a separate file and then uses it from both the LLVM
build as well as the LLVM runtimes build.
Differential Revision: https://reviews.llvm.org/D62769
llvm-svn: 362313
This feeds the new llvm_codsign BUNDLE_PATH option through from the llvm target wrapper functions, so that you can specify the BUNDLE_PATH on the target's codesign.
llvm-svn: 362248
CMake always uses absolute file paths in the generated compiler
invocation which results in absolute file paths being embedded in debug
info. This is undesirable when building a toolchain e.g. on bots as the
debug info may embed the bot source checkout path which is meaningless
anywhere else.
This change introduces the LLVM_USE_RELATIVE_PATHS_IN_DEBUG_INFO which uses
-fdebug-prefix-map (where supported) options to rewrite paths embedded
into debug info with relative ones. Additionally, LLVM_SOURCE_PREFIX can
be used to override the path to source directory with a different one.
Differential Revision: https://reviews.llvm.org/D62622
llvm-svn: 362185
Summary:
Clangd's framework is assembled by copying binaries from the lib and bin directories into a bundle shape. This results in an invalid bundle code signature because the signature only applies to the binaries not the resources.
This patch adds two new options to `llvm_codesign` to enable re-signing the library and XPC service as bundles.
The `BUNDLE_PATH` option allow specifying an explicit path to codesign, which enables signing bundles which aren't generated using CMake's `FRAMEWORK` or `BUNDLE` target properties.
The `FORCE` option allows re-signing binaries that have already been signed. This is required for how clangd exposes the clangd library and tools as both XPC and non-XPC services using the same binary.
Reviewers: jkorous, bogner
Reviewed By: bogner
Subscribers: mgorny, ilya-biryukov, dexonsmith, arphaman, kadircet, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62693
llvm-svn: 362169
This reverts r361790 (git commit fe5eaab2b5b4523886bd63aebcfea8cfce586fa1)
It's causing buildbot breakage, so reverting while I investigate.
llvm-svn: 361793
Summary:
The following changes were required to fix these tests:
1) Change LLVM_ENABLE_PLUGINS to an option and move it to
llvm/CMakeLists.txt with an appropriate default -- which matches
the original default behavior.
2) Move the plugins directory from clang/test/Analysis
clang/lib/Analysis. It's not enough to add an exclude to the
lit.local.cfg file because add_lit_testsuites recurses the tree and
automatically adds the appropriate `check-` targets, which don't
make sense for the plugins because they aren't tests and don't
have `RUN` statements.
Here's a list of the `clang-check-anlysis*` targets with this
change:
```
$ ninja -t targets all| sed -n "s/.*\/\(check[^:]*\):.*/\1/p" | sort -u | grep clang-analysis
check-clang-analysis
check-clang-analysis-checkers
check-clang-analysis-copypaste
check-clang-analysis-diagnostics
check-clang-analysis-engine
check-clang-analysis-exploration_order
check-clang-analysis-html_diagnostics
check-clang-analysis-html_diagnostics-relevant_lines
check-clang-analysis-inlining
check-clang-analysis-objc
check-clang-analysis-unified-sources
check-clang-analysis-z3
```
3) Simplify the logic and only include the subdirectories under
clang/lib/Analysis/plugins if LLVM_ENABLE_PLUGINS is set.
Reviewed By: NoQ
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62445
llvm-svn: 361790
This reverts commit r361340. The following builder has been broken for
the past few days because of this commit:
http://green.lab.llvm.org/green/job/clang-stage2-cmake-RgSan/
Also revert r361399, which was committed to fix r361340.
llvm-svn: 361685
Summary:
For the most part this consists of replacing ${LLVM_TARGETS_TO_BUILD} with
some combination of AllTargets* so that they depend on specific components
of a target backend rather than all of it. The overall effect of this is
that, for example, tools like opt no longer falsely depend on the
disassembler, while tools like llvm-ar no longer depend on the code
generator.
There's a couple quirks to point out here:
* AllTargetsCodeGens is a bit more prevalent than expected. Tools like dsymutil
seem to need it which I was surprised by.
* llvm-xray linked to all the backends but doesn't seem to need any of them.
It builds and passes the tests so that seems to be correct.
* I left gold out as it's not built when binutils is not available so I'm
unable to test it
Reviewers: bogner, JDevlieghere
Reviewed By: bogner
Subscribers: mehdi_amini, mgorny, steven_wu, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62331
llvm-svn: 361567
which doesn't play well with passing CMAKE_MAKE_PROGRAM from the
commandline without a path.
Fixes a bug introduced in r361280.
Thanks to Mikael Holmén for reporting this!
llvm-svn: 361501
These are needed to avoid undefined symbols which aren't satisfied
by Clang itself.
Differential Revision: https://reviews.llvm.org/D62174
llvm-svn: 361340
Summary:
clang and newer versions of ninja use high-resolutions timestamps, but
older versions of libtool on Darwin don't, so the archive will often
get an older timestamp than the last object that was added or updated.
To fix this, we add a custom command to touch the archive after it's
been built so that ninja won't rebuild it unnecessarily the next time
it's run.
Reviewed By: beanz
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62172
llvm-svn: 361280
This addresses an issue introduced in r360230 which broke existing
use cases of LLVM_DISTRIBUTION_COMPONENTS since ARCHIVE and LIBRARY
target types are no longer handled as components.
Differential Revision: https://reviews.llvm.org/D62176
llvm-svn: 361223
- Just look for "lld-link", not "lld-link.exe".
llvm/cmake/platforms/WinMsvc.cmake for example sets CMAKE_LINKER to
lld-link without .exe
- Stop passing -gwarf to the compiler in sanitizer options when lld is
enabled -- there's no reason to use different debug information keyed
off the linker. (If this was for MinGW, we should check for that
instead.)
Differential Revision: https://reviews.llvm.org/D62111
llvm-svn: 361214
When targeting Windows and building a runtime (subproject) prefer to use
`clang-cl` rather than the `clang` driver. This allows us to cross-compile
runtimes for the Windows environment from Linux.
llvm-svn: 361072
When plugins aren't enabled, don't try to run plugins tests. Don't
enable plugins unconditionally based on the platform, instead check
if LLVM shared library is actually being built which may not be the
case for every host configuration, even if the host itself supports
plugins.
This addresses test failures introduced by r360891/D59464.
Differential Revision: https://reviews.llvm.org/D62050
llvm-svn: 360991
Remove C4800 : ''type' : forcing value to bool 'true' or 'false' (performance warning)' from the list of forced disabled warnings.
I'm not seeing any regressions in VS2017/VS2019 llvm/clang builds from removing this.
Differential Revision: https://reviews.llvm.org/D61730
llvm-svn: 360417
Remove C4355 : ''this' : used in base member initializer list' from the list of forced disabled warnings.
I'm not seeing any regressions in VS2017/VS2019 llvm/clang builds from removing this.
Differential Revision: https://reviews.llvm.org/D61757
llvm-svn: 360413
Simplify the cmake logic to install both runtime and import
libraries (treated as ARCHIVE), as the later are needed to link
against llvm.
Patch by Julien Schueller!
Differential Revision: https://reviews.llvm.org/D61425
llvm-svn: 360230
Summary: This requres exec-ing python, which in a trace I ran of the CMake re-configure time took ~2% of the reconfigure time.
Reviewers: phosek, smeenai, compnerd
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61402
llvm-svn: 360196
Summary: When libc++ is used to build CLANG, its XRay libraries libclang_rt.xray-*.a have dependencies on libc++. Therefore, libc++ is needed to link and run XRay test cases. For Linux -rpath is also needed to specify where to load libc++. This change sets macro LLVM_LIBCXX_USED to 1 if libc++ is actually used in the build. XRay tests then check the flag and add -L<llvm_shlib_dir> -lc++ and -Wl,-rpath=<llvm_shlib_dir> if needed.
Reviewers: hubert.reinterpretcast, amyk, dberris, jasonliu, sfertile, EricWF
Subscribers: dberris, mgorny, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61016
llvm-svn: 360060
The unwind tables (`.eh_frame`, `.arm.extab`) add a significant chunk of data to
the final binaries. These should not be needed normally, particularly when
exceptions are disabled. This enables shrinking `lldb-server` by ~18% (3 MiB)
when built with gold.
llvm-svn: 359819
This is required for using PGO on Windows but isn't in the Windows
release packages. Windows packages are built with
LLVM_INSTALL_TOOLCHAIN_ONLY so only includes llvm "tools" listed here.
Differential Revision: https://reviews.llvm.org/D61317
llvm-svn: 359569
For clang-cl self hosts in VS2015 environment this was reporting: "Host
Clang must have at least -fms-compatibility-version=19.00.24213.1, your
version is 9.0.0".
This check fires as CMake detects the simulated environment as _MSC_VER
1900, which is truncated. This makes it less than the required
19.00.24213.1.
Differential revision: https://reviews.llvm.org/D61188
llvm-svn: 359556
GCC when compiling LLVM for MIPS can introduce a jump to an uninitialized
value when shrink wrapping is enabled. As shrink wrapping is enabled in
GCC at all optimization levels, it must be disabled. This bug exists for
all versions of GCC since 4.9.2.
This partially resolves PR37701 / GCC PR target/86069.
Patch by Simon Dardis.
Differential Revision: https://reviews.llvm.org/D48069
llvm-svn: 359376
Summary:
This value is derived from the host triple, which on the machine
I'm currently using is `ppc64le-linux-redhat`. This change makes
LLVM compile.
Reviewers: nemanjai
Differential Revision: https://reviews.llvm.org/D57118
llvm-svn: 359242
Summary:
The CMake documentation says that the `DEPENDS` field of
add_custom_target is for files and output of custom commands. Adding a
dependency on a target should be done with `add_dependency`.
Differential Revision: https://reviews.llvm.org/D60879
llvm-svn: 359042
This allows the cross compiled build targets to configure the LLVM tools and sub-projects that are part of the main build.
This is needed for generating native non llvm *-tablegen tools when cross compiling clang in the monorepo build environment.
llvm-svn: 358779
Summary:
Extra flexibility for emitting debug info to external files (remains Darwin only for now).
LLDB needs this functionality to emit a LLDB.framework.dSYM instead of LLDB.dSYM when building the framework, because the latter could conflict with the driver's lldb.dSYM when emitted in the same directory on case-insensitive file systems.
Reviewers: friss, bogner, beanz
Subscribers: mgorny, aprantl, llvm-commits, #lldb
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60862
llvm-svn: 358685
Summary:
This code was added in r141266 to make a breaking change to CMake, but
still be compatible with existing cache files. The cache files from
2011 are irrelevant today in 2019.
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60711
llvm-svn: 358482
Summary:
There is a bug in add_tablegen which causes cmake to fail with the following
error message if LLVM_TABLEGEN is set.
CMake Error at cmake/modules/TableGen.cmake:147 (add_dependencies):
The dependency target "LLVM-tablegen-host" of target "CLANG-tablegen-host"
does not exist.
Call Stack (most recent call first):
tools/clang/utils/TableGen/CMakeLists.txt:3 (add_tablegen)
The issue happens because setting LLVM_TABLEGEN causes cmake to skip generating
the LLVM-tablegen-host target. As a result, a non-existent target was added for
CLANG-tablegen-host causing cmake to fail.
In order to fix this issue, this patch adds a guard to check the validity of the
dependency target before adding it as a dependency.
Reviewers: aganea, smeenai
Reviewed By: aganea
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60576
llvm-svn: 358226
Standalone builds of projects other than llvm itself (lldb, libcxx,
etc) include HandleLLVMOptions but not the top level llvm CMakeLists,
so we need to set this variable here to ensure that it always has a
value.
This should fix the build issues some folks have been seeing.
llvm-svn: 357976
Simplify building with particular C++ standards by replacing the
specific "enable standard X" flags with a flag that allows specifying
the standard you want directly.
We preserve compatibility with the existing flags so that anyone with
those flags in existing caches won't break mysteriously.
Differential Revision: https://reviews.llvm.org/D60399
llvm-svn: 357899
Modify the add_header_files_for_glob() function to only add files
that do exist, rather than all matches of the glob. This fixes CMake
error when one of the include directories (which happen to include
/usr/include) contain broken symlinks.
Differential Revision: https://reviews.llvm.org/D59632
llvm-svn: 357701
Instead of duplicating functionality for building native versions of
tblgen and llvm-config, add a function to set up a native tool build.
This will also be used for llvm-nm in a follow-up.
This should be NFC for tblgen, besides the slightly different COMMENT
for the custom command (it'll display the tablegen target name instead
of always saying TableGen). For the native llvm-config, it's a behavior
change in that we'll use llvm_ExternalProject_BuildCmd instead of
constructing the build command manually, always build in Release, and
reference the correct binary path for multi-config generators. I believe
all of these changes to be bug fixes.
Differential Revision: https://reviews.llvm.org/D60024
llvm-svn: 357486
Use $<CONFIG> instead of $<CONFIGURATION>, since the latter has been
deprecated since CMake 3.0, and the former is entirely equivalent.
llvm-svn: 357338
A bunch of macros use the same variable name, and since CMake macros
don't get their own scope, the value persists across macro invocations,
and we can end up exporting targets which shouldn't be exported. Clear
the variable before each use to avoid this.
Converting these macros to functions would also help, since it would
avoid the variable leaking into its parent scope, and that's something I
plan to follow up with. It won't fully address the problem, however,
since functions still inherit variables from their parent scopes, so if
someone in the parent scope just happened to use the same variable name
we'd still have the same issue.
llvm-svn: 357036
Summary:
This wasn't actually printing out a CMake warning, it was prepending
"WARN" to the message.
Reviewers: zturner
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59432
llvm-svn: 356297
Summary:
In support of IBM's efforts to produce a viable C and C++ LLVM compiler for AIX
(ref: RFC at http://lists.llvm.org/pipermail/llvm-dev/2019-February/130175.html),
this patch adds customizations to the CMake files in order to properly
invoke the host toolchain for the build on AIX.
Additional changes to enable a successful build will follow.
Patch by Xing Xue
Reviewers: hubert.reinterpretcast, jasonliu, sfertile
Reviewed by: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D58250
llvm-svn: 356104
Summary:
AIX compilers define macros based on the version of the operating
system.
This patch implements updating of versionless AIX triples to include the
host AIX version. Also, the host triple detection in the build system is
adjusted to strip the AIX version information so that the run-time
detection is preferred.
Reviewers: xingxue, stefanp, nemanjai, jasonliu
Reviewed By: xingxue
Subscribers: mgorny, kristina, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58798
llvm-svn: 355995
When installing runtimes with install-runtimes-stripped, we don't want
to just strip them, we also want to preserve the debugging information
for potential debugging. To make it possible to later find the stripped
debugging information, we want to use the .build-id layout:
https://fedoraproject.org/wiki/RolandMcGrath/BuildID#Find_files_by_build_ID
That is, for libfoo.so with build ID abcdef1234, the debugging information
will be installed into lib/debug/.build-id/ab/cdef1234. llvm-objcopy
already has support for stripping files and linking the debugging
stripped output into the right location. However, CMake doesn't support
customizing strip invocation for the *-stripped targets. So instead, we
replace CMAKE_STRIP with a custom script that invokes llvm-objcopy with
the right command line flags.
Differential Revision: https://reviews.llvm.org/D59127
llvm-svn: 355765
Summary:
The date-based approach to detecting unsupported versions of libstdc++
does not handle bug fix releases of older versions. As an example, the
`__GLIBCXX__` value associated with version 5.1, `20150422`, is less
than the values associated with versions 4.8.5 and 4.9.3.
This patch adds secondary checks based on certain properties in
sufficiently new versions of libstdc++.
Reviewers: jfb, tstellar, rnk, sfertile, nemanjai
Reviewed By: jfb
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58682
llvm-svn: 355638
Part 4 of CSPGO changes:
(1) add support in cmake for cspgo build.
(2) fix an issue in big endian.
(3) test cases.
Differential Revision: https://reviews.llvm.org/D54175
llvm-svn: 355541
Getting rid of the name "optimization remarks" for anything that
involves handling remarks on the client side.
It's safer to do this now, before we get stuck with that name in all the
APIs and public interfaces we decide to export to users in the future.
This renames llvm/tools/opt-remarks to llvm/tools/remarks-shlib, and now
generates `libRemarks.dylib` instead of `libOptRemarks.dylib`.
Differential Revision: https://reviews.llvm.org/D58535
llvm-svn: 355439
When using the umbrella llvm-libraries and clang-libraries targets, we
should export all library targets, otherwise they'll be part of our
distribution but not usable from the CMake package.
Differential Revision: https://reviews.llvm.org/D58862
llvm-svn: 355354
Summary:
Handle the case where LLVM_MAIN_SRC_DIR is not set and also use
LLVM_CMAKE_DIR for locating installed cmake files rather than
LLVM_CMAKE_PATH.
Reviewers: phosek, andrewrk, smeenai
Reviewed By: phosek, andrewrk, smeenai
Subscribers: mgorny, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D58204
llvm-svn: 354417
Compiler-rt doesn't include config-ix which was providing CheckSymbolExists to
the LLVM build. Add it to HandleLLVMOptions to fix this
llvm-svn: 354389
Surprisingly, check_symbol_exists is not sufficient. The macOS linker checks the
called functions against a compatibility list for the given deployment target
and check_symbol_exists doesn't trigger this check as it never calls the
function.
This fixes the GreenDragon bots where the deployment target is 10.9
llvm-svn: 354374
Summary:
Instruments is a useful tool for finding performance issues in LLVM but it can
be difficult to identify regions of interest on the timeline that we can use
to filter the profiler or allocations instrument. Xcode 10 and the latest
macOS/iOS/etc. added support for the os_signpost() API which allows us to
annotate the timeline with information that's meaningful to LLVM.
This patch causes timer start and end events to emit signposts. When used with
-time-passes, this causes the passes to be annotated on the Instruments timeline.
In addition to visually showing the duration of passes on the timeline, it also
allows us to filter the profile and allocations instrument down to an individual
pass allowing us to find the issues within that pass without being drowned out
by the noise from other parts of the compiler.
Using this in conjunction with the Time Profiler (in high frequency mode) and
the Allocations instrument is how I found the SparseBitVector that should have
been a BitVector and the DenseMap that could be replaced by a sorted vector a
couple months ago. I added NamedRegionTimers to TableGen and used the resulting
annotations to identify the slow portions of the Register Info Emitter. Some of
these were placed according to educated guesses while others were placed
according to hot functions from a previous profile. From there I filtered the
profile to a slow portion and the aforementioned issues stood out in the
profile.
To use this feature enable LLVM_SUPPORT_XCODE_SIGNPOSTS in CMake and run the
compiler under Instruments with -time-passes like so:
instruments -t 'Time Profiler' bin/llc -time-passes -o - input.ll'
Then open the resulting trace in Instruments.
There was a talk at WWDC 2018 that explained the feature which can be found at
https://developer.apple.com/videos/play/wwdc2018/405/ if you'd like to know
more about it.
Reviewers: bogner
Reviewed By: bogner
Subscribers: jdoerfert, mgorny, kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D52954
llvm-svn: 354365
Modify LLVMConfig to provide split variables for in-source and generated
include paths. Currently, it uses a single value for both
LLVM_INCLUDE_DIRS and LLVM_INCLUDE_DIR which works for install tree but
fails hard at build tree (where LLVM_INCLUDE_DIR incorrectly contains
multiple values).
Instead, put the generated directory in LLVM_INCLUDE_DIR, and the source
tree in LLVM_MAIN_INCLUDE_DIR which is consistent with in-LLVM builds.
For install tree, both variables will have the same value.
Differential Revision: https://reviews.llvm.org/D58109
llvm-svn: 353924
Find dependent scripts of GenerateVersionFromVCS in current directory
rather than ../../cmake/modules. I do not see any reason why the former
would not work and The latter is incorrect when GenerateVersionFromVCS
is used from install directory (i.e. in stand-alone builds).
Differential Revision: https://reviews.llvm.org/D57996
llvm-svn: 353674
Summary:
The RFC on moving past C++11 got good traction:
http://lists.llvm.org/pipermail/llvm-dev/2019-January/129452.html
This patch therefore bumps the toolchain versions according to our policy:
llvm.org/docs/DeveloperPolicy.html#toolchain
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits, mehdi_amini, jyknight, rsmith, chandlerc, smeenai, hans, reames, lattner, lhames, erichkeane
Differential Revision: https://reviews.llvm.org/D57264
llvm-svn: 353374
As far as I can tell, malloc.h is only being used here to provide
a definition of mallinfo (malloc itself is declared in stdlib.h via
cstdlib). We already have a macro for whether mallinfo is available,
so switch to using that instead.
Differential Revision: https://reviews.llvm.org/D57807
llvm-svn: 353329
Previously, there were two different scripts for generating VCS headers:
one used by LLVM and one used by Clang and lldb. They were both similar,
but different. They were both broken in their own ways, for example the
one used by Clang didn't properly handle monorepo resulting in an
incorrect version information reported by Clang.
This change unifies two the scripts by introducing a new script that's
used from both LLVM, Clang and lldb, ensures that the new script
supports both monorepo and standalone SVN and Git setups, and removes
the old scripts.
Differential Revision: https://reviews.llvm.org/D57063
llvm-svn: 353268
Reverting D57264 again, it looks like we're down to two bots that need fixing:
polly-amd64-linux
polly-arm-linux
They both have old versions of libstdc++ and recent clang.
llvm-svn: 352954
Summary:
The RFC on moving past C++11 got good traction:
http://lists.llvm.org/pipermail/llvm-dev/2019-January/129452.html
This patch therefore bumps the toolchain versions according to our policy:
llvm.org/docs/DeveloperPolicy.html#toolchain
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits, mehdi_amini, jyknight, rsmith, chandlerc, smeenai, hans, reames, lattner, lhames, erichkeane
Differential Revision: https://reviews.llvm.org/D57264
llvm-svn: 352951
Summary: D56606 was only appending target names to the `LLVM_EXPORTS`/`LLVM_EXPORTS_BUILDTREE_ONLY` properties. Targets showed up correctly in the build-tree `LLVMExports.cmake`, but they were missing in the installed one (as we found in https://bugs.llvm.org/show_bug.cgi?id=40443), because install did not register them explicitly.
Reviewers: mgorny, smeenai, beanz, gottesmm, dschuff, tstellar, serge-sans-paille
Reviewed By: smeenai
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D57383
llvm-svn: 352869
Summary:
The RFC on moving past C++11 got good traction:
http://lists.llvm.org/pipermail/llvm-dev/2019-January/129452.html
This patch therefore bumps the toolchain versions according to our policy:
llvm.org/docs/DeveloperPolicy.html#toolchain
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits, mehdi_amini, jyknight, rsmith, chandlerc, smeenai, hans, reames, lattner, lhames, erichkeane
Differential Revision: https://reviews.llvm.org/D57264
llvm-svn: 352834
A handful of bots are still breaking, either because I missed them in my audit,
they were offline, or something else. I'm contacting their authors, but I'll
revert for now and re-commit later.
llvm-svn: 352814
Summary:
The RFC on moving past C++11 got good traction:
http://lists.llvm.org/pipermail/llvm-dev/2019-January/129452.html
This patch therefore bumps the toolchain versions according to our policy:
llvm.org/docs/DeveloperPolicy.html#toolchain
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits, mehdi_amini, jyknight, rsmith, chandlerc, smeenai, hans, reames, lattner, lhames, erichkeane
Differential Revision: https://reviews.llvm.org/D57264
llvm-svn: 352811
CMake 3.6 introduced CMAKE_TRY_COMPILE_PLATFORM_VARIABLES, which solves
precisely the problem that necessitated init_user_prop, so we can switch
over whenever we bump our minimum CMake requirement.
llvm-svn: 352790
Previously, there were two different scripts for generating VCS headers:
one used by LLVM and one used by Clang. They were both similar, but
different. They were both broken in their own ways, for example the one
used by Clang didn't properly handle monorepo resulting in an incorrect
version information reported by Clang.
This change unifies two the scripts by introducing a new script that's
used from both LLVM and Clang, ensures that the new script supports both
monorepo and standalone SVN and Git setups, and removes the old scripts.
Differential Revision: https://reviews.llvm.org/D57063
llvm-svn: 352729
Summary: We added support for code signing entitlements in add_llvm_executable() with D54443. In the future it would be useful to have this functionality available also for libraries.
Reviewers: beanz, bogner
Reviewed By: bogner
Subscribers: mgorny, llvm-commits, lldb-commits, #lldb
Differential Revision: https://reviews.llvm.org/D57334
llvm-svn: 352628
Refactor the get_llvm_lit_path() logic to respect LLVM_EXTERNAL_LIT,
and require the fallback to be defined explicitly
as LLVM_DEFAULT_EXTERNAL_LIT. This fixes building libcxx standalone
after r346888.
The old logic was using LLVM_EXTERNAL_LIT both as user-defined cache
variable and an optional pre-definition of default value from caller
(e.g. libcxx). It included a hack to make this work by assigning
the value back and forth but it was fragile and stopped working
in libcxx.
The new logic is simpler and more transparent. Default value is
provided in a separate variable, and used only when user-specified
variable is empty (i.e. not overriden).
Differential Revision: https://reviews.llvm.org/D57282
llvm-svn: 352374
llvm::is_trivially_copyable portability is verified at compile time using
std::is_trivially_copyable as the reference implementation.
Unfortunately, the latter is not available on all platforms, so introduce
a proper configure check to detect if it is available on the target platform.
In a similar manner, std::is_copy_assignable is not fully supported for gcc4.9.
Provide a portable (?) implementation instead.
Differential Revision: https://reviews.llvm.org/D57018
llvm-svn: 351820
Summary:
Capture the current agreed-upon toolchain update policy based on the following
discussions:
- LLVM dev meeting 2018 BoF "Migrating to C++14, and beyond!"
llvm.org/devmtg/2018-10/talk-abstracts.html#bof3
- A Short Policy Proposal Regarding Host Compilers
lists.llvm.org/pipermail/llvm-dev/2018-May/123238.html
- Using C++14 code in LLVM (2018)
lists.llvm.org/pipermail/llvm-dev/2018-May/123182.html
- Using C++14 code in LLVM (2017)
lists.llvm.org/pipermail/llvm-dev/2017-October/118673.html
- Using C++14 code in LLVM (2016)
lists.llvm.org/pipermail/llvm-dev/2016-October/105483.html
- Document and Enforce new Host Compiler Policy
llvm.org/D47073
- Require GCC 5.1 and LLVM 3.5 at a minimum
llvm.org/D46723
Subscribers: jkorous, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D56819
llvm-svn: 351765
This extends the CMake cross compilation logic so that AVR can be set as
the default target triple, and thus the generic codegen tests can be
run.
This used to be possible on AVR; the CMake configuration files have
since been changed.
With this patch, 'cmake -DLLVM_DEFAULT_TARGET_TRIPLE=avr-unknown-unknown' can
be passed on the command line, making the `-mcpu` argument redundant to
'llc' and friends.
llvm-svn: 351678
Summary: This change factors out compiler checking / warning, and documents LLVM_FORCE_USE_OLD_TOOLCHAIN. It doesn't introduce any functional changes nor policy changes, these will come late.
Subscribers: mgorny, jkorous, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D56799
llvm-svn: 351387
Summary:
Allow external projects to import test-related targets like FileCheck, count, not etc. and query binary paths, properties, etc.
This would be useful for LLDB, because it reduces the difference between in-tree vs. standalone builds and simplifies CMake logic.
Reviewers: chapuni, gottesmm, beanz
Reviewed By: beanz
Subscribers: mgorny, lldb-commits, llvm-commits, #lldb
Differential Revision: https://reviews.llvm.org/D56606
llvm-svn: 350959
Summary: A post-commit comment to D55116 amended that this was the correct way for code signing in Xcode.
Reviewers: beanz
Reviewed By: beanz
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D55816
llvm-svn: 350383
Summary:
This function is very similar to add_llvm_library(), so this patch merges it
into add_llvm_library() and replaces all calls to add_llvm_loadable_module(lib ...)
with add_llvm_library(lib MODULE ...)
Reviewers: philip.pfaffe, beanz, chandlerc
Reviewed By: philip.pfaffe
Subscribers: chapuni, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D51748
llvm-svn: 349839
This relands r330742:
"""
Let TableGen write output only if it changed, instead of doing so in cmake.
Removes one subprocess and one temp file from the build for each tablegen
invocation.
No intended behavior change.
"""
In particular, if you see rebuilds after this change that you didn't see
before this change, that's unintended and it's fine to revert this change
again (but let me know).
r330742 got reverted because some people reported that llvm-tblgen ran on every
build after it. This could happen if the depfile output got deleted without
deleting the main .inc output. To fix, make TableGen always write the depfile,
but keep writing the main .inc output only if it has changed. This matches what
we did in cmake before.
Differential Revision: https://reviews.llvm.org/D55842
llvm-svn: 349624
Previously, when compiling Visual Studio targets, one could see random build errors. This was caused by tablegen projects using the same build folders.
This workaround simply chains tablegen projects.
Differential Revision: https://reviews.llvm.org/D54153
llvm-svn: 349596
Previously, when compiling Visual Studio targets, one could see random build errors. This was caused by tablegen projects using the same build folders.
This workaround simply chains tablegen projects.
Differential Revision: https://reviews.llvm.org/D54153
llvm-svn: 349541
- Disable incremental linking by default. /INCREMENTAL adds extra thunks in the EXE, which makes execution slower.
- Set /MT (static CRT lib) by default instead of CMake's default /MD (dll CRT lib). The previous default /MD makes all DLL functions to be thunked, thus making execution slower (memcmp, memset, etc.)
- Adds LLVM_ENABLE_INCREMENTAL_LINK which is set to OFF by default.
Differential revision: https://reviews.llvm.org/D55056
llvm-svn: 349517
Summary:
When using Xcode to build LLVM with code signing, the post-build rule is executed even if the actual build-step was skipped. This causes double-signing errors. We can currently only avoid it by passing the `--force` flag.
Plus some polishing for my previous patch D54443.
Reviewers: beanz, kubamracek
Reviewed By: kubamracek
Subscribers: #lldb, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D55116
llvm-svn: 349070
Summary:
Allow clients to suppress setup of default RPATHs in designated library targets. This is used in LLDB when emitting liblldb as a framework bundle, which itself doesn't load further RPATH-dependent libraries.
This follows the approach in add_llvm_executable().
Reviewers: aprantl, JDevlieghere, davide, friss
Reviewed By: aprantl
Subscribers: mgorny, lldb-commits, llvm-commits, #lldb
Differential Revision: https://reviews.llvm.org/D55316
llvm-svn: 348573
I found the pattern of setting the project_BUILD variable to OFF after
processing the project to be pretty confusing. Using global properties
to explicitly keep track of whether a project has been processed or not
seems much more straightforward, and it also allows us to convert the
macro into a function (which is required for the early return).
Factor the project+type+name combination out into a variable while I'm
here, since it's used a whole bunch of times.
I don't believe this should result in any functional changes.
Differential Revision: https://reviews.llvm.org/D55104
llvm-svn: 348180
Summary: When using `LLVM_EXTERNALIZE_DEBUGINFO` in LLDB, the default dSYM location for the shared library in LLDB.framework is inside the framework bundle. With `LLVM_EXTERNALIZE_DEBUGINFO_OUTPUT_DIR` we can easily fix that. I consider it a useful feature to be able to set a global output directory for external debug info (rather then having a target-specific one). Only implemented for Darwin so far.
Reviewers: beanz, aprantl
Reviewed By: aprantl
Subscribers: mgorny, aprantl, #lldb, lldb-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D55114
llvm-svn: 348118
The add_llvm_symbol_exports function in AddLLVM.cmake creates command
line link flags with paths containing CMAKE_CURRENT_BINARY_DIR, but that
will break if CMAKE_CURRENT_BINARY_DIR contains whitespace. This patch
adds quotes to those paths.
Fixes PR39843.
Patch by John Garvin.
Differential Revision: https://reviews.llvm.org/D55081
llvm-svn: 347937
Summary:
getLastAccessedTime() and getLastModificationTime() provided times in nanoseconds but with only 1 second resolution, even when the underlying file system could provide more precise times than that.
These changes add sub-second precision for unix platforms that support improved precision.
Also add some comments to make sure people are aware that the resolution of times can vary across different file systems.
Reviewers: labath, zturner, aaron.ballman, kristina
Reviewed By: aaron.ballman, kristina
Subscribers: lebedev.ri, mgorny, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D54826
llvm-svn: 347530
Summary:
It will cause test tools `FileCheck`, `count`, `not` being built blindly, these
dependencies should move back to clang-tools-extra.
Reviewers: mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54797
llvm-svn: 347448
The diagnostic will trigger on code that does not have any comma operator, but instead default-constructs an object with an explicitly defaulted constructor as the array index argument.
llvm-svn: 347345
Summary:
NetBSD ships with native curses(3) and -ltinfo is a part of ncurses.
Set -lterminfo before -ltinfo, as it allows to prioritize native curses
libraries. Mixing curses and ncurses does not work well, especially
in software built on top of llvm.
Original patch by Ryo Onodera (NetBSD) in pkgsrc.
Reviewers: labath, dim, mgorny
Reviewed By: dim, mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54650
llvm-svn: 347156
Summary: Allow code-signing with entitlements. FORCE may be used to avoid an error when replacing existing signatures.
Reviewers: beanz, bogner
Reviewed By: beanz
Subscribers: mgorny, llvm-commits, lldb-commits
Differential Revision: https://reviews.llvm.org/D54443
llvm-svn: 347068
When using multi-stage builds, we would like support cross-compilation.
Example is 2-stage build when the first stage is compiled for host while
the second stage is compiled for the target.
Normally, the second stage would be also used for compiling runtimes,
but that's not possible when cross-compiling, so we use the first stage
compiler instead. However, we still want to use the second stage paths.
To do so, we set the -resource-dir of the first stage compiler to point
to the resource directory of the second stage.
We also need compiler tools that support the target architecture. These
tools are not guaranteed to be present on the host, but in case of
multi-stage build, we can build these tools in the first stage.
Differential Revision: https://reviews.llvm.org/D54461
llvm-svn: 347025
* Create an install target for it
* Add it under tools/opt-remarks
* Add an export file for the dylib
* Install the llvm-c/OptRemarks.h header
* Add an API to query its version
rdar://45458839
llvm-svn: 346127
There are several places where we use CMAKE_CONFIGURATION_TYPES to determine if we are using an IDE generator and in turn decide not to generate some of the convenience targets (like all the install-* and check-llvm-* targets). This decision is made because IDEs don't always deal well with the thousands of targets LLVM can generate.
This approach does not work for Visual Studio 15's new CMake integration. Because VS15 uses a Ninja generator, it isn't a multi-configuration build, and generating all these extra targets mucks up the UI and adds little value.
With this change we still don't generate these targets by default for Visual Studio and Xcode generators, and LLVM_ENABLE_IDE becomes a switch that can be enabled on the VS15 CMake builds, to improve the IDE experience.
This is a re-land of r340435, with a few minor fix-ups. The issues causing the revert were addressed in r344218, r344219, and r344553.
llvm-svn: 344555
There really aren't any generator behaviors that we need to take `CMAKE_EXTRA_GENERATOR` into account for. Where we need to take different behaviors for IDEs is mostly in enabling or disabling certain build system features that are optional but trip up the IDE UIs. Like the generation of lots of utility targets.
By changing the LLVM_ENABLE_IDE default to only being on for multi-configuration generators, we allow gating where it will impact the UI presentation, while also supporting optionally disabling the generation if your tooling workflow encounters problems. Presently being able to manually disable extra target generation is useful for Visual Studio 2017's CMake integration where the IDE has trouble displaying and working with the large number of optional targets.
llvm-svn: 344553
