I don't yet fully understand the meaning of these data strcutures,
but at least it seems that their sizes and types are correct.
With this change, we can read publics streams till end.
Differential Revision: http://reviews.llvm.org/D20343
llvm-svn: 269861
As discovered in PR27758, GDB does not fully support the DWARF 4 format.
This patch ensures we always emit bitfields in the DWARF 2 when tuning for GDB.
llvm-svn: 269827
The DWARF spec states that a member entry may have either a
DW_AT_data_member_location or a DW_AT_data_bit_offset, but not both.
This fixes a bug found in PR 27758.
llvm-svn: 269731
The DWARF spec clearly states that a bit field member should have either a
DW_AT_byte_size or a DW_AT_bit_size, but not both.
Also the DW_AT_byte_size is redundant with the size of the type of the member.
This fixes a bug found in PR 27758.
llvm-svn: 269714
Publics stream seems to contain information as to public symbols.
It actually contains a serialized hash table along with fixed-sized
headers. This patch is not complete. It scans only till the end of
the stream and dump the header information. I'll write code to
de-serialize the hash table later.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20256
llvm-svn: 269484
Summary: This way we can get rid of one of the fields in the .def file.
Reviewers: llvm-commits
Subscribers: zturner
Differential Revision: http://reviews.llvm.org/D20251
llvm-svn: 269461
for the same subprogram.
This fixes a bug where DW_AT_abstract_origin is being emitted twice for
the same subprogram if a function is both inlined and emitted in the same
translation unit, by restoring the pre-r266446 behavior.
http://reviews.llvm.org/D20072
llvm-svn: 269103
This reuses the CVTypeDumper from libcodeview to dump full
information about type records within a PDB file.
Differential Revision: http://reviews.llvm.org/D20022
Reviewed By: rnk
llvm-svn: 268808
Summary:
If a function needs to allocate both callee-save stack memory and local
stack memory, we currently decrement/increment the SP in two steps:
first for the callee-save area, and then for the local stack area. This
changes the code to allocate them both at once at the very beginning/end
of the function. This has two benefits:
1) there is one fewer sub/add micro-op in the prologue/epilogue
2) the stack adjustment instructions act as a scheduling barrier, so
moving them to the very beginning/end of the function increases post-RA
scheduler's ability to move instructions (that only depend on argument
registers) before any of the callee-save stores
This change can cause an increase in instructions if the original local
stack SP decrement could be folded into the first store to the stack.
This occurs when the first local stack store is to stack offset 0. In
this case we are trading off one more sub instruction for one fewer sub
micro-op (along with benefits (2) and (3) above).
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18619
llvm-svn: 268746
When printing raw PDB file fields, streams, and records, use the
ScopedPrinter class so we have consistency with llvm-readobj's output
format.
For the most part this is pretty mechanical, but I had to fix up the test
file to conform to the new YAMLesque output format. i added a few
additional helper functions to the ScopedPrinter such as one to print a
dotted version, etc.
Differential Revision: http://reviews.llvm.org/D19897
Reviewed By: rnk
llvm-svn: 268506
As requested by Rafael Espindola in his post-commit comments on r268036. This
makes the previous behaviour the default while still allowing verification of
IAS.
llvm-svn: 268496
This parses the TPI stream (stream 2) from the PDB file. This stream
contains some header information followed by a series of codeview records.
There is some additional complexity here in that alongside this stream of
codeview records is a serialized hash table in order to efficiently query
the types. We parse the necessary bookkeeping information to allow us to
reconstruct the hash table, but we do not actually construct it yet as
there are still a few things that need to be understood first.
Differential Revision: http://reviews.llvm.org/D19840
Reviewed By: ruiu, rnk
llvm-svn: 268343
Summary:
When SelectionDAG performs CSE it is possible that the context's source
location is different from that of the selected node. This can lead to
incorrect line number records. We update the debug location to the
one that occurs earlier in the instruction sequence.
This fixes PR21006.
Reviewers: echristo, sdmitrouk
Subscribers: jevinskie, asl, llvm-commits
Differential Revision: http://reviews.llvm.org/D12094
llvm-svn: 268323
PDB has a lot of similar data structures. We already have code
for parsing a Name Map, but PDB seems to have a different but
very similar structure that is a hash table. This is the
beginning of code needed in order to parse the name hash table,
but it is not yet complete. It parses the basic metadata of
the hash table, the bucket array, and the names buffer, but
doesn't use any of these fields yet as the data structure
requires a non-trivial amount of work to understand.
llvm-svn: 268268
Summary:
This is the follow-up patch for http://reviews.llvm.org/D19436
* Update the discriminator reading algorithm to match the assignment algorithm.
* Add test to cover the new algorithm.
Reviewers: dnovillo, echristo, dblaikie
Subscribers: danielcdh, dblaikie, echristo, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19522
llvm-svn: 267945
We now read out the rest of the substreams from the DBI streams. One of
these substreams, the FileInfo substream, contains information about which
source files contribute to each module (aka compiland). This patch
additionally parses out the file information from that substream, and
dumps it in llvm-pdbdump.
Differential Revision: http://reviews.llvm.org/D19634
Reviewed by: ruiu
llvm-svn: 267928
The DWARF2 specification of DW_AT_bit_offset is ambiguous for
little-endian machines, but by restoring to the old behavior
we match what debuggers expect and what other popular compilers
generate.
llvm-svn: 267896
The DWARF2 specification of DW_AT_bit_offset was written from the perspective of
a big-endian machine with unclear semantics for other systems. DWARF4
deprecated DW_AT_bit_offset and introduced a new attribute DW_AT_data_bit_offset
that simply counts the number of bits from the beginning of the containing
entity regardless of endianness.
After this patch LLVM emits DW_AT_bit_offset for DWARF 2 or 3 and
DW_AT_data_bit_offset when DWARF 4 or later is requested.
llvm-svn: 267895
This gets more data out of the DBI strema of the PDB. In
particular it extracts the metadata for the list of modules
(compilands) that this PDB contains info about, and adds support
for dumping these fields to llvm-pdbdump.
Differential Revision: http://reviews.llvm.org/D19570
Reviewed By: ruiu
llvm-svn: 267818
The DBI stream contains a lot of bookkeeping information for other
streams. In particular it contains information about section contributions
and linked modules. This patch is a first attempt at parsing some of the
information out of the DBI stream. It currently only parses and dumps the
headers of the DBI stream, so none of the module data or section
contribution data is pulled out.
This is just a proof of concept that we understand the basic properties of
the DBI stream's metadata, and followup patches will try to extract more
detailed information out.
Differential Revision: http://reviews.llvm.org/D19500
Reviewed By: majnemer, ruiu
llvm-svn: 267585
in a debug-info-bearing function has a debug location attached to it. Failure to
do so causes an "!dbg attachment points at wrong subprogram for function"
assertion failure when the inliner sets up inline scope info.
rdar://problem/25878916
This reaplies r267320 without changes after fixing an issue in the OpenMP IR
generator in clang.
llvm-svn: 267370
in a debug-info-bearing function has a debug location attached to it. Failure to
do so causes an "!dbg attachment points at wrong subprogram for function"
assertion failure when the inliner sets up inline scope info.
rdar://problem/25878916
llvm-svn: 267320
Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifier:', and DIBuilder no longer retains all types with an
'identifier:' automatically.
Aside from the bitcode upgrade, this is mainly removing logic to resolve
an MDString-based reference to an actualy DIType. The commits leading
up to this have made the implicit type map in DICompileUnit's
'retainedTypes:' field superfluous.
This does not remove DITypeRef, DIScopeRef, DINodeRef, and
DITypeRefArray, or stop using them in DI-related metadata. Although as
of this commit they aren't serving a useful purpose, there are patchces
under review to reuse them for CodeView support.
The tests in LLVM were updated with deref-typerefs.sh, which is attached
to the thread "[RFC] Lazy-loading of debug info metadata":
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html
llvm-svn: 267296
The dwo_name was added to dwo files to improve diagnostics in dwp, but
it confuses tools that attempt to load any dwo named by a dwo_name, even
ones inside dwos. Avoid this by keeping track of whether a unit is
already a dwo unit, and if so, not loading further dwos.
llvm-svn: 267241
Rather than relying on the gmlt-like data emitted into the .o/executable
which only contains the simple name of any inlined functions, use the
.dwo file if present.
Test symbolication with/without a .dwo, and the old test that was
testing behavior when no gmlt-like data was present. (I haven't included
a test of non-gmlt-like data + no .dwo (that would be akin to
symbolication with no debug info) but we could add one for completeness)
The test was simplified a bit to be a little clearer (unoptimized, force
inline, using a function call as the inlined entity) and regenerated
with ToT clang. For the no-gmlt-like-data case, I modified Clang back to
its old behavior temporarily & the .dwo file is identical so it is
shared between the two executables.
llvm-svn: 267227
r267049 broke multiple buildbots (e.g. clang-cmake-mips, and clang-x86_64-linux-selfhost-modules) which the follow-ups have not yet resolved and this is preventing subsequent committers from being notified about additional failures on the affected buildbots.
llvm-svn: 267148
Before this fix, DILexicalBlockFile entries were skipped only in some cases and were not in other cases.
Differential Revision: http://reviews.llvm.org/D18724
llvm-svn: 267004
With this change, ideally IR pass can always generate llvm.stackguard
call to get the stack guard; but for now there are still IR form stack
guard customizations around (see getIRStackGuard()). Future SSP
customization should go through LOAD_STACK_GUARD.
There is a behavior change: stack guard values are not CSEed anymore,
since we should never reuse the value in case that it has been spilled (and
corrupted). See ssp-guard-spill.ll. This also cause the change of stack
size and codegen in X86 and AArch64 test cases.
Ideally we'd like to know if the guard created in llvm.stackprotector() gets
spilled or not. If the value is spilled, discard the value and reload
stack guard; otherwise reuse the value. This can be done by teaching
register allocator to know how to rematerialize LOAD_STACK_GUARD and
force a rematerialization (which seems hard), or check for spilling in
expandPostRAPseudo. It only makes sense when the stack guard is a global
variable, which requires more instructions to load. Anyway, this seems to go out
of the scope of the current patch.
llvm-svn: 266806
When we suppress linkage names, for a non-inlined subprogram the name
can still be found in the object-file symbol table, because we have
the code address of the subprogram. This is not necessarily the case
for an inlined subprogram, so we still want to emit the linkage name
in the DWARF. Put this on the abstract-origin DIE because it's common
to all inlined instances.
Differential Revision: http://reviews.llvm.org/D18706
llvm-svn: 266692
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
llvm-svn: 266446
We were incorrectly reporting all non-64 bit integers as int64s.
This is most evident when trying to print the "short" type, but
in theory could happen with chars too (although usually chars use
a different builtin type).
Additionally, we were using the wrong check when deciding whether
to print an enum definition as a global enum. We were checking
whether or not the enum was "nested", and if so saving it until
we print the class definition that it was nested in. But this is
not correct in rare situations where the enum is nested, but the
class that it's nested in does not have type information in the PDB.
So instead we check if there is a class definition for the parent
in the PDB. If so we save it for later, otherwise we print it.
llvm-svn: 265993
This change follows up defaults for GCC and Clang, so LLVM does not differ
from them. While number of the test files are touched with this change, they
all keep the old (expected) behaviour with the explicit option:
"-relocation-model=pic"
The tests that have not been touched are insensitive to relocation model.
Differential Revision: http://reviews.llvm.org/D17995
llvm-svn: 265949
This patch drops the debug info for all DISubprograms that are
(a) not attached to an llvm::Function and
(b) not indirectly reachable via inline scopes from any surviving Function and
(c) not reachable from a type (i.e.: member functions).
Background: I'm currently working on a patch to reverse the pointers
between DICompileUnit and DISubprogram (for more info check Duncan's RFC
on lazy-loading of debug info metadata
http://lists.llvm.org/pipermail/llvm-dev/2016-March/097419.html).
The idea is to remove the list of subprograms from DICompileUnit and
instead point to the owning compile unit from each DISubprogram.
After doing this all DISubprograms fulfilling the above criteria will be
implicitly dropped unless we go through an extra effort to preserve them.
http://reviews.llvm.org/D18477
<rdar://problem/25256815>
llvm-svn: 265876
Sample-based profiling and optimization remarks currently remove
DICompileUnits from llvm.dbg.cu to suppress the emission of debug info
from them. This is somewhat of a hack and only borderline legal IR.
This patch uses the recently introduced NoDebug emission kind in
DICompileUnit to achieve the same result without breaking the Verifier.
A nice side-effect of this change is that it is now possible to combine
NoDebug and regular compile units under LTO.
http://reviews.llvm.org/D18808
<rdar://problem/25427165>
llvm-svn: 265861
This patch closes a gap in the DWARF backend that caused LLVM to drop
debug info for floating point variables that were constant for part of
their scope. Floating point constants are emitted as one or more
DW_OP_constu joined via DW_OP_piece.
This fixes a regression caught by the LLDB testsuite that I introduced
in r262247 when we stopped blindly expanding the range of singular
DBG_VALUEs to span the entire scope and started to emit location lists
with accurate ranges instead.
Also deletes a now-impossible testcase (debug-loc-empty-entries).
<rdar://problem/25448338>
llvm-svn: 265760
This mostly cosmetic patch moves the DebugEmissionKind enum from DIBuilder
into DICompileUnit. DIBuilder is not the right place for this enum to live
in — a metadata consumer should not have to include DIBuilder.h.
I also added a Verifier check that checks that the emission kind of a
DICompileUnit is actually legal.
http://reviews.llvm.org/D18612
<rdar://problem/25427165>
llvm-svn: 265077
MachineFunctionProperties represents a set of properties that a MachineFunction
can have at particular points in time. Existing examples of this idea are
MachineRegisterInfo::isSSA() and MachineRegisterInfo::tracksLiveness() which
will eventually be switched to use this mechanism.
This change introduces the AllVRegsAllocated property; i.e. the property that
all virtual registers have been allocated and there are no VReg operands
left.
With this mechanism, passes can declare that they require a particular property
to be set, or that they set or clear properties by implementing e.g.
MachineFunctionPass::getRequiredProperties(). The MachineFunctionPass base class
verifies that the requirements are met, and handles the setting and clearing
based on the delcarations. Passes can also directly query and update the current
properties of the MF if they want to have conditional behavior.
This change annotates the target-independent post-regalloc passes; future
changes will also annotate target-specific ones.
Reviewers: qcolombet, hfinkel
Differential Revision: http://reviews.llvm.org/D18421
llvm-svn: 264593
Now register parameters that aren't saved to the stack or CSRs are
considered dead after the first call. Previously the debugger would show
whatever was in the register.
Fixes PR26589
Reviewers: aprantl
Differential Revision: http://reviews.llvm.org/D17211
llvm-svn: 264429
When multiple DWP files are merged together and duplicate DWO IDs are
found it's currently difficult to give an actionable error message - the
DW_AT_name of the CU could be provided, but might be identical (if the
same source file is built into two different configurations), which
doesn't help the user identify the problem.
When no intermediate DWP files are generated, the path to the two DWO
files could be provided - but is lost once the DWOs are merged into a
DWP.
So, include the name of the DWO (dwo_name) in the split file so that
collissions involving a source CU from a DWP can be better diagnosed.
(improvements to llvm-dwp using this to come shortly)
llvm-svn: 264316
A virtual index of -1u indicates that the subprogram's virtual index is
unrepresentable (for example, when using the relative vtable ABI), so do
not emit a DW_AT_vtable_elem_location attribute for it.
Differential Revision: http://reviews.llvm.org/D18236
llvm-svn: 263765
Removing the assertion is safe to do because any module level inline
assembly is always emitted first via AsmPrinter::doInitialization().
http://reviews.llvm.org/D16101
rdar://22690666
llvm-svn: 263033
Summary:
This change enables frame pointer elimination in non-leaf functions.
The -fomit-frame-pointer option still needs to be used when compiling
via clang (or an equivalent method of not setting the
'no-frame-pointer-elim*' function attributes if generating llvm IR via
some other method) to take advantage of this optimization.
This change should be NFC when compiling via clang without
-fomit-frame-pointer.
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, tberghammer, qcolombet, llvm-commits, danalbert, mcrosier, srhines
Differential Revision: http://reviews.llvm.org/D17730
llvm-svn: 262495
When a variable is described by a single DBG_VALUE instruction we can
often use a more efficient inline DW_AT_location instead of using a
location list.
This commit makes the heuristic that decides when to apply this
optimization stricter by also verifying that the DBG_VALUE is live at the
entry of the function (instead of just checking that it is valid until
the end of the function).
<rdar://problem/24611008>
llvm-svn: 262247
Summary:
Without this, this command
$ llvm-run llc -stop-after machine-cp -o - <( echo '' )
outputs an error, because we close stdout twice -- once when closing the
file opened for "-o", and again when closing outs().
Also clarify in the outs() definition that you can't ever call it if you
want to open your own raw_fd_ostream on stdout.
Reviewers: jroelofs, tstellarAMD
Subscribers: jholewinski, qcolombet, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17422
llvm-svn: 261286
described by an immediate.
Found via http://reviews.llvm.org/D16867
Thanks to Paul Robinson for pointing this out.
<rdar://problem/24456528>
llvm-svn: 261168
This function is used to check whether a dbg.value intrinsic has already
been inserted, but without comparing the DIExpression, it would erroneously
fire on split aggregates and only the first scalar would survive.
Found via http://reviews.llvm.org/D16867.
<rdar://problem/24456528>
llvm-svn: 261145
Summary:
Refactor common value, scope, and label tracking logic out of DwarfDebug
into a common base class called DebugHandlerBase.
Update an old LLVM IR test case to avoid an assertion in LexicalScopes.
Reviewers: dblaikie, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16931
llvm-svn: 260432
Summary:
In r257979, I added code to ensure that we wouldn't merge DebugLocEntries if
the pieces they describe overlap. Unfortunately, I failed to cover the case,
where there may have multiple active Expressions in the entry, in which case we
need to make sure that no two values overlap before we can perform the merge.
This fixed PR26148.
Reviewers: aprantl
Differential Revision: http://reviews.llvm.org/D16742
llvm-svn: 259696
CodeView requires us to accurately describe the extent of the inlined
code. We did this by grabbing the next debug location in source order
and using *that* to denote where we stopped inlining. However, this is
not sufficient or correct in instances where there is no next debug
location or the next debug location belongs to the start of another
function.
To get this correct, use the end symbol of the function to denote the
last possible place the inlining could have stopped at.
llvm-svn: 259548
This directive emits the binary annotations that describe line and code
deltas in inlined call sites. Single-stepping through inlined frames in
windbg now works.
llvm-svn: 259535
Summary:
There are three parts to inlined call frames:
1. The inlinee line subsection
2. The inline site symbol record
3. The function ids referenced by both
This change starts by emitting function ids (3) for all subprograms and
emitting the base inline site symbol record (2). The actual line numbers
in (2) use an encoded format that will come next, along with the inlinee
line subsection.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16333
llvm-svn: 259217
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
llvm-svn: 259126
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
llvm-svn: 259117
There was support for writing the AArch64 big endian data fixup entries in
the .eh_frame section in BE. This is changed to write all such fixup
entries in BE with no restriction on the section. This is similar to
the existing support for fixup entries for ARM.
A test is added to check the length field in the .debug_line section as
this is an example of where such a fixup occurs.
Differential Revision: http://reviews.llvm.org/D16064
llvm-svn: 258320
Summary:
Later in DWARF emission we check that DebugLocEntries have
non-overlapping pieces, so we should create any such entries
by merging here.
Fixes PR26163.
Reviewers: aprantl
Differential Revision: http://reviews.llvm.org/D16249
llvm-svn: 257979
I originally reapplied this in 257550, but had to revert again due to bot
breakage. The only change in this version is to allow either the TypeSize
or the TypeAllocSize of the variable to be the one represented in debug info
(hopefully in the future we can figure out how to encode the difference).
Additionally, several bot failures following r257550, were due to
optimizer bugs now fixed in r257787 and r257795.
r257550 commit message was:
```
The follow extra changes were made to test cases:
Manually making the variable be the actual type instead of a pointer
to avoid pointer-size differences in generic code:
LLVM :: DebugInfo/Generic/2010-03-24-MemberFn.ll
LLVM :: DebugInfo/Generic/2010-04-06-NestedFnDbgInfo.ll
LLVM :: DebugInfo/Generic/2010-05-03-DisableFramePtr.ll
LLVM :: DebugInfo/Generic/varargs.ll
Delete sizing information from debug info for the same reason
(but the presence of the pointer was important to the test case):
LLVM :: DebugInfo/Generic/restrict.ll
LLVM :: DebugInfo/Generic/tu-composite.ll
LLVM :: Linker/type-unique-type-array-a.ll
LLVM :: Linker/type-unique-simple2.ll
Fixing an incorrect DW_OP_deref
LLVM :: DebugInfo/Generic/2010-05-03-OriginDIE.ll
Fixing a missing DW_OP_deref
LLVM :: DebugInfo/Generic/incorrect-variable-debugloc.ll
Additionally, clang should no longer complain during bootstrap should no
longer happen after r257534.
The original commit message was:
``
Summary:
Teach the Verifier to make sure that the storage size given to llvm.dbg.declare
or the value size given to llvm.dbg.value agree with what is declared in
DebugInfo. This is implicitly assumed in a number of passes (e.g. in SROA).
Additionally this catches a number of common mistakes, such as passing a
pointer when a value was intended or vice versa.
One complication comes from stack coloring which modifies the original IR when
it merges allocas in order to make sure that if AA falls back to the IR it gets
the correct result. However, given this new invariant, indiscriminately
replacing one alloca by a different (differently sized one) is no longer valid.
Fix this by just undefing out any use of the alloca in a dbg.declare in this
case.
Additionally, I had to fix a number of test cases. Of particular note:
- I regenerated dbg-changes-codegen-branch-folding.ll from the given source as
it was affected by the bug fixed in r256077
- two-cus-from-same-file.ll was changed to avoid having a variable-typed debug
variable as that would depend on the target, even though this test is
supposed to be generic
- I had to manually declared size/align for reference type. See also the
discussion for D14275/r253186.
- fpstack-debuginstr-kill.ll required changing `double` to `long double`
- most others were just a question of adding OP_deref
``
```
llvm-svn: 257850
Clang generates good display names for codeview since r255744, and the
change to make LLVM use them was accidentally included in r257658.
This change just updates the comments and test case to reflect reality
better.
llvm-svn: 257723
This rewrites and expands the existing codeview dumping functionality in
llvm-readobj using techniques similar to those in lib/Object. This defines a
number of new records and enums useful for reading memory mapped codeview
sections in COFF objects.
The dumper is intended as a testing tool for LLVM as it grows more codeview
output capabilities.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D16104
llvm-svn: 257658
The line tables for CodeView make a distinction between expressions and
statements. As it turns out, MSVC always emits them as statements and
we always emit them as expressions. Let's switch to statements to match
the CodeView that they emit.
llvm-svn: 257553
This change has us print out fields we didn't previously understand. To
improve readability, we now group column information with it's
respective line.
llvm-svn: 257552
The follow extra changes were made to test cases:
Manually making the variable be the actual type instead of a pointer
to avoid pointer-size differences in generic code:
LLVM :: DebugInfo/Generic/2010-03-24-MemberFn.ll
LLVM :: DebugInfo/Generic/2010-04-06-NestedFnDbgInfo.ll
LLVM :: DebugInfo/Generic/2010-05-03-DisableFramePtr.ll
LLVM :: DebugInfo/Generic/varargs.ll
Delete sizing information from debug info for the same reason
(but the presence of the pointer was important to the test case):
LLVM :: DebugInfo/Generic/restrict.ll
LLVM :: DebugInfo/Generic/tu-composite.ll
LLVM :: Linker/type-unique-type-array-a.ll
LLVM :: Linker/type-unique-simple2.ll
Fixing an incorrect DW_OP_deref
LLVM :: DebugInfo/Generic/2010-05-03-OriginDIE.ll
Fixing a missing DW_OP_deref
LLVM :: DebugInfo/Generic/incorrect-variable-debugloc.ll
Additionally, clang should no longer complain during bootstrap should no
longer happen after r257534.
The original commit message was:
```
Summary:
Teach the Verifier to make sure that the storage size given to llvm.dbg.declare
or the value size given to llvm.dbg.value agree with what is declared in
DebugInfo. This is implicitly assumed in a number of passes (e.g. in SROA).
Additionally this catches a number of common mistakes, such as passing a
pointer when a value was intended or vice versa.
One complication comes from stack coloring which modifies the original IR when
it merges allocas in order to make sure that if AA falls back to the IR it gets
the correct result. However, given this new invariant, indiscriminately
replacing one alloca by a different (differently sized one) is no longer valid.
Fix this by just undefing out any use of the alloca in a dbg.declare in this
case.
Additionally, I had to fix a number of test cases. Of particular note:
- I regenerated dbg-changes-codegen-branch-folding.ll from the given source as
it was affected by the bug fixed in r256077
- two-cus-from-same-file.ll was changed to avoid having a variable-typed debug
variable as that would depend on the target, even though this test is
supposed to be generic
- I had to manually declared size/align for reference type. See also the
discussion for D14275/r253186.
- fpstack-debuginstr-kill.ll required changing `double` to `long double`
- most others were just a question of adding OP_deref
```
llvm-svn: 257550
CodeView, unlike DWARF, can associate code with a range of columns.
However, LLVM can only represent a single column position internally.
We used to claim that the end column and start column were the same
which yielded less than satisfactory results: we would stop printing at
the _beginning_ of the source expression! Instead, mark the column-end
as 'zero' to indicate that we don't have one (as per the documentation
for IDiaLineNumber::get_lineNumberEnd).
llvm-svn: 257528
Summary:
Teach the Verifier to make sure that the storage size given to llvm.dbg.declare
or the value size given to llvm.dbg.value agree with what is declared in
DebugInfo. This is implicitly assumed in a number of passes (e.g. in SROA).
Additionally this catches a number of common mistakes, such as passing a
pointer when a value was intended or vice versa.
One complication comes from stack coloring which modifies the original IR when
it merges allocas in order to make sure that if AA falls back to the IR it gets
the correct result. However, given this new invariant, indiscriminately
replacing one alloca by a different (differently sized one) is no longer valid.
Fix this by just undefing out any use of the alloca in a dbg.declare in this
case.
Additionally, I had to fix a number of test cases. Of particular note:
- I regenerated dbg-changes-codegen-branch-folding.ll from the given source as
it was affected by the bug fixed in r256077
- two-cus-from-same-file.ll was changed to avoid having a variable-typed debug
variable as that would depend on the target, even though this test is
supposed to be generic
- I had to manually declared size/align for reference type. See also the
discussion for D14275/r253186.
- fpstack-debuginstr-kill.ll required changing `double` to `long double`
- most others were just a question of adding OP_deref
Reviewers: aprantl
Differential Revision: http://reviews.llvm.org/D14276
llvm-svn: 257105
Summary:
In rL242338, debugger tuning was introduced, and the tuning for FreeBSD
was set to lldb by default. However, for the foreseeable future we
still need to default to gdb tuning, since lldb is not ready for all of
FreeBSD's architectures, and some system tools (like objcopy, etc) have
not yet been adapted to cope with the lldb tuned format, which has
.apple sections.
Therefore, let FreeBSD use gdb by default for now.
Reviewers: emaste, probinson
Subscribers: llvm-commits, emaste
Differential Revision: http://reviews.llvm.org/D15966
llvm-svn: 257103
Summary:
There are a number of files in the tree which have been accidentally checked in with DOS line endings. Convert these to native line endings.
There are also a few files which have DOS line endings on purpose, and I have set the svn:eol-style property to 'CRLF' on those.
Reviewers: joerg, aaron.ballman
Subscribers: aaron.ballman, sanjoy, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15848
llvm-svn: 256707
LLVM's targets need to know if stack pointer adjustments occur after the
prologue. This is needed to correctly determine if the red-zone is
appropriate to use or if a frame pointer is required.
Normally, LLVM can figure this out very precisely by reasoning about the
contents of the MachineFunction. There is an interesting corner case:
inline assembly.
The vast majority of inline assembly which will perform a push or pop is
done so to pair up with pushf or popf as appropriate. Unfortunately,
this inline assembly doesn't mark the stack pointer as clobbered
because, well, it isn't. The stack pointer is decremented and then
immediately incremented. Because of this, LLVM was changed in r256456
to conservatively assume that inline assembly contain a sequence of
stack operations. This is unfortunate because the vast majority of
inline assembly will not end up manipulating the stack pointer in any
way at all.
Instead, let's provide a more principled solution: an intrinsic.
FWIW, other compilers (MSVC and GCC among them) also provide this
functionality as an intrinsic.
llvm-svn: 256685
A frame pointer must be used if stack pointer is modified after the
prologue. LLVM will emit pushf/popf if we need to save/restore the
FLAGS register, requiring us to have a frame pointer for the function.
There is a small twist: this sequence might exist in user code via
inline-assembly. For now, conservatively assume that such functions
require a frame pointer. For real world justification, please see
clang's implementation of __readeflags.
This fixes PR25945.
llvm-svn: 256456
LiveDebugVariables unconditionally propagates all DBG_VALUE down the
dominator tree, which happens to work fine if there already is another
DBG_VALUE or the DBG_VALUE happends to describe a single-assignment vreg
but is otherwise wrong if the DBG_VALUE is coming from only one of the
predecessors.
In r255759 we introduced a proper data flow analysis scheduled after
LiveDebugVariables that correctly propagates DBG_VALUEs across basic block
boundaries. With the new pass in place, the incorrect propagation in
LiveDebugVariables can be retired witout loosing any of the benefits
where LiveDebugVariables happened to do the right thing.
llvm-svn: 256188
Summary:
First up is instcombine, where in the dbg.declare -> dbg.value conversion,
the llvm.dbg.value needs to be called on the actual loaded value, rather
than the address (since the whole point of this transformation is to be
able to get rid of the alloca). Further, now that that's cleaned up, we
can remove a hack in the backend, that would add an implicit OP_deref if
the argument to dbg.value was an alloca. This stems from before the
existence of DIExpression and is no longer necessary since the deref can
be expressed explicitly.
Now, in order to make sure that the tests pass with this change, we need to
correct the printing of DEBUG_VALUE comments to take into account the
expression, which wasn't taken into account before.
Unfortunately, for both these changes, there were a number of incorrect
test cases (mostly the wrong number of DW_OP_derefs, but also a couple
where the test itself was broken more badly). aprantl and I have gone
through and adjusted these test case in order to make them pass with
these fixes and in some cases to make sure they're actually testing
what they are meant to test.
Reviewers: aprantl
Subscribers: dsanders
Differential Revision: http://reviews.llvm.org/D14186
llvm-svn: 256077
SDAG currently can emit debug location for function parameters when
an llvm.dbg.declare points to either a function argument SSA temp,
or to an AllocaInst. This change extends this logic by adding a
fallback case when neither of the above is true.
This is required for SafeStack, which may copy the contents of a
byval function argument into something that is not an alloca, and
then describe the target as the new location of the said argument.
llvm-svn: 254352
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
llvm-svn: 253511
If a section is rw, it is irrelevant if the dynamic linker will write to
it or not.
It looks like llvm implemented this because gcc was doing it. It looks
like gcc implemented this in the hope that it would put all the
relocated items close together and speed up the dynamic linker.
There are two problem with this:
* It doesn't work. Both bfd and gold will map .data.rel to .data and
concatenate the input sections in the order they are seen.
* If we want a feature like that, it can be implemented directly in the
linker since it knowns where the dynamic relocations are.
llvm-svn: 253436
