* Make runtimes and projects build with the new front-end by not relying on
'llvm-gcc -c' to build a .bc file. Instead, use llvm-gcc -S -emit-llvm,
then an explicit invocation of gccas. Also, don't use llvm-gcc to link
.bc files together, use gccld directly.
llvm-svn: 25707
1. When srcdir == objdir have "spotless" say that it isn't supported in
that mode rather than just let make say "no such target"
2. Minor doc cleanups
3. Fix the double rebuild problem with yacc files. A missing dependency
caused parallel builds to skip building the .cpp file after the .cpp
file was regenerated by bison.
llvm-svn: 24924
* Add --enable-debug-runtime option, defaults to disabled
* Pass the new config var, DEBUG_RUNTIME, to Makefiles
* Don't use -Wa,-strip-debug if debug-runtime is enabled
llvm-svn: 24891
into the LLVMAnalysis library.
This allows LLVMTranform and LLVMTransformUtils to be archives and linked
with LLVMAnalysis.a, which provides any missing definitions.
llvm-svn: 24036
SparcV9 JIT.
2. Make LLVMTransformUtils a relinked object file and always link it before
LLVMAnalysis.a. These two libraries have circular dependencies on each
other which creates problem when building the SparcV9 JIT. This change
fixes the dependency on all platforms problems with a minimum of fuss.
llvm-svn: 24023
pointer marking the end of the list, the zero *must* be cast to the pointer
type. An un-cast zero is a 32-bit int, and at least on x86_64, gcc will
not extend the zero to 64 bits, thus allowing the upper 32 bits to be
random junk.
The new END_WITH_NULL macro may be used to annotate a such a function
so that GCC (version 4 or newer) will detect the use of un-casted zero
at compile time.
llvm-svn: 23888
These changes modify the makefiles so that the output of flex and bison are
placed in the SRC directory, not the OBJ directory. It is intended that they
be checked in as any other LLVM source so that platforms without convenient
access to flex/bison can be compiled. From now on, if you change a .y or
.l file you *must* also commit the generated .cpp and .h files.
llvm-svn: 23115
Move the implementation of the fix from Makefile.rules to Makefile. This
ensures that it is only checked on a top-level rebuild, and not in every
single subdirectory. This removes some annoying messages from the build and
numerous executions of config.status if the .in file changes but not
substantively enough to cause the .h file to be modified by config.status.
llvm-svn: 23039
Make any header files that are automatically generated be preconditions of
the compilation. This ensures that if a *.h.in file is changed then its
corresponding *.h file gets updated on the next rebuild. Note that this can
lead to confusing (but correct) results if the *.h.in file changed
unsubstantially so that autoheader doesn't update the *.h file. In that case,
manually touch the *.h file in question to restore order. Moral of the story,
if you're going to "touch" a *.in file then modify it substantially.
llvm-svn: 23006
1. Allow DIST_CHECK_CONFIG_OPTION to specify a set of options to be passed
to the configure script during the dist-check target. This allows things
to be passed down on a project basis so the configure doesn't fail.
2. Use the tar | (cd ; tar ) idiom to copy files which is more flexible
than using the cp command. THis allows us to exclude CVS .svn
directories at source rather than stripping them out of the tar ball.
llvm-svn: 22166
llvm archive or re-linked libraries:
1. Permit the "JIT" special keyword on LLVMLIBS to be recognized when
building a library, not just for building tools
2. If LINK_LIBS_IN_SHARED is set, the LLVMLIBS and USEDLIBS can be specified
when linking a shared library and the libraries listed will be
incorported into the shared library. THis is only used when the
SHARED_LIBRARY variable is set.
llvm-svn: 22127
* Consolidate all "install" usage to the install program/script found by
autoconf which includes the autoconf/install-sh script if necessary
* Change Makefile.rules to not use the -D flag to install but use the
MKDIR command as necessary.
* Change Makefile.rules to differentiate between installation of executable
files and regular data files to get the permission modes correct.
llvm-svn: 20294
* Make it possible to have the Install program run in verbose mode when
the TOOL_VERBOSE=1 option is set
* Ensure non-executable installed files do not install with execute perms.
llvm-svn: 20214
When llvm-gcc is not available, bypass rules for Modules and Bytecode
Libraries that require llvm-gcc and emit instead a warning that llvm-gcc
is not available. This permits "make LLVMGCC=" to build LLVM completely
without error and provides warnings about the modules and bc libs that
could not be constructed.
llvm-svn: 20185
passes the -module option on the libtool command line to ensure that the
shared library being built can be dlopened and dlsym can work on that
module. LOADABLE_MODULE should be sent only in conjunction with the
SHARED_LIBRARY directive. It should generally be used for any module that
is intended to be the target of an LLVM -load option. Note that loadable
modules will not have the lib prefix but otherwise look like shared
libraries. This is per the libtool recommendations and prevents these
special shared libraries from being linked in via -l option to the linker.
llvm-svn: 19454
Reverting the quote patch. For some reason, this breaks the building of
llvm/runtime (the shell doesn't like it for some reason). I might play
with it to see if I can get the quotes done in such a way that the shell
like it, but no promises.
llvm-svn: 19275
exceptions to abort() in cases where it should not.
Many thanks to Duraid Madina for doing the heavy lifting on the analysis
of this problem.
llvm-svn: 19256
* When reconfiguring, make sure the config.cache file is blown away so that
its (old) values don't short-circuit doing the tests. When a reconfigure
is done, it should be done from scratch, without the cache.
* For dist-check, don't pass --with-llvmgccdir any more because configure
doesn't have this option any more.
llvm-svn: 19126
* Cleanup LLVMGCXX and LLVMGCC by providing LLVMGXXWITHPATH and LLVMGCCWITHPATH
variables that add the $(LLVMToolDir) to the path so the CFE tools can find
the right LLVM tools they depend on.
* Standardize the name of a variable: cferuntime_libdir -> CFERuntimeLibDir
llvm-svn: 19095
* Convert "cmp" usage to $(CMP)
* Convert "cp" usage to $(CP)
* Fix some build messages to reflect what's actually going on
* Add a "reconfigure" target for forcing a reconfigure. Helps with testing
things like Chris's recent changes.
llvm-svn: 18991
files that USE the .inc file unless the contents of the .inc file changes.
This should fix the problem where reconfiguring causes all targets to be
completely rebuilt (because config.h is usually modified, causing libsystem
to be rebuilt, causing tblgen to be rebuilt, causing .inc files to be
rebuilt, causing .o files to be rebuilt).
This patch also checks in a gross hack where .o files now explicitly depend
on $(BUILT_SOURCES), to avoid problems where the .inc files are not completely
generated before the .o files start to compile.
llvm-svn: 18986
to BUILD_OBJ_SRC. This will save the config.status and mklib files, then
wipe out the BUILD_OBJ_ROOT, copy back config.status and mklib, and then
run config.status to regenerate the makefiles. This target gives you a
completely clean/fresh BUILD_OBJ_ROOT.
llvm-svn: 18981
specify where the bytecode library is to be installed. This allows the
default location ($prefix/lib) to be overridden, for special case runtime
libraries like the cfe runtime libs.
llvm-svn: 18879
present in a directory that LLVM normally builds, it will skip building
the directory entirely. This is useful for allowing a bunch of projects to
live in the source tree but not be compiled from time to time.
llvm-svn: 18671
* Implement the FAKE_SOURCES feature for GCCLibraries/crtend \
* Search for distribution files >first< in srcdir and >second< in objdir \
* Make dist-hook only run in top level directory. \
* Make dist-check run correctly in parallel builds \
* Wrap lines to 80 cols \
* Standardize variable names
llvm-svn: 18504
Change construction of bytecode libraries from producing a single bytecode
file to producing a library containing bytecode files. This gets around the
problem of multiple symbol definitions in the linker if something like
-lc -lc is attempted on the command line. Previously this happened because
the linker would find libc.bc as a "library". It will now find libc.a which
it can simply search for missing symbols instead of linking in wholesale.
llvm-svn: 18425
