This change lets us bootstrap LLVM/Clang under ASan and MSan. It contains
fixes for 2 issues:
- X86JIT reads return address from stack, which MSan does not know is
initialized.
- bugpoint tests run binaries with RLIMIT_AS. This does not work with certain
Sanitizers.
We are no longer including config.h in Compiler.h with this change.
llvm-svn: 174306
This patch adds support for AArch64 (ARM's 64-bit architecture) to
LLVM in the "experimental" category. Currently, it won't be built
unless requested explicitly.
This initial commit should have support for:
+ Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions
(except the late addition CRC instructions).
+ CodeGen features required for C++03 and C99.
+ Compilation for the "small" memory model: code+static data <
4GB.
+ Absolute and position-independent code.
+ GNU-style (i.e. "__thread") TLS.
+ Debugging information.
The principal omission, currently, is performance tuning.
This patch excludes the NEON support also reviewed due to an outbreak of
batshit insanity in our legal department. That will be committed soon bringing
the changes to precisely what has been approved.
Further reviews would be gratefully received.
llvm-svn: 174054
Remove the use of the 't' length modifier to avoid a gcc warning. Based
on usage, 32 bits of precision is good enough for printing a stack
offset for a stack trace.
't' length modifier isn't in C++03 but it *is* in C++11. Added a FIXME
to reintroduce once LLVM makes the switch to C++11.
Reviewer: gribozavr
llvm-svn: 173711
Add the x32 environment kind to the triple, and separate the concept of
pointer size and callee save stack slot size, since they're not equal
on x32.
llvm-svn: 173175
Previously we tried to infer it from the bit width size, with an added
IsIEEE argument for the PPC/IEEE 128-bit case, which had a default
value. This default value allowed bugs to creep in, where it was
inappropriate.
llvm-svn: 173138
In r143502, we renamed getHostTriple() to getDefaultTargetTriple()
as part of work to allow the user to supply a different default
target triple at configure time. This change also affected the JIT.
However, it is inappropriate to use the default target triple in the
JIT in most circumstances because this will not necessarily match
the current architecture used by the process, leading to illegal
instruction and other such errors at run time.
Introduce the getProcessTriple() function for use in the JIT and
its clients, and cause the JIT to use it. On architectures with a
single bitness, the host and process triples are identical. On other
architectures, the host triple represents the architecture of the
host CPU, while the process triple represents the architecture used
by the host CPU to interpret machine code within the current process.
For example, when executing 32-bit code on a 64-bit Linux machine,
the host triple may be 'x86_64-unknown-linux-gnu', while the process
triple may be 'i386-unknown-linux-gnu'.
This fixes JIT for the 32-on-64-bit (and vice versa) build on non-Apple
platforms.
Differential Revision: http://llvm-reviews.chandlerc.com/D254
llvm-svn: 172627
Right now, only OS X has a way to determine the column width of a string
(PR14910). Until we have a good way to deal with this, we just won't
print carets, source ranges, or fixits for SMDiagnostic if the source line
has multibyte characters in it.
llvm-svn: 172164
Like Clang's FixItHint, SMFixIt represents an insertion, replacement, or
removal of source text. One or more fix-its can be emitted as part of
a diagnostic, and will be printed below the source range line to show the
user how they can fix their code.
Currently, the only client of SMFixIt is clang-tblgen; thus, the tests for
this behavior live in clang/test/TableGen/tg-fixits.td. If/when SMFixIt is
adopted within LLVM itself, those tests should be moved to the LLVM suite.
llvm-svn: 172086
This is necessary not only for representing empty ranges, but for handling
multibyte characters in the input. (If the end pointer in a range refers to
a multibyte character, should it point to the beginning or the end of the
character in a char array?) Some of the code in the asm parsers was already
assuming this anyway.
llvm-svn: 171765
leaving this undefined, and despite the sentence in the standard that
seems to require it, I'll cede the point and assume its a bug in the
wording. Other parts of POSIX regularly allow for things to be -1
instead of undefined, this should too. Makes things more consistent too.
This should have to real impact for folks though.
llvm-svn: 171574
defines _POSIX_CPUTIME but doesn't support the clock_* functions.
I don't test the value of _POSIX_CPUTIME because the spec merely says
that if it is defined, the CPU-specific timers are available, whereas it
says that _POSIX_TIMERS must be defined and defined to a value greater
than zero. However, this may not work, as the POSIX spec clearly states:
"If the symbolic constant _POSIX_CPUTIME is defined, then the symbolic
constant _POSIX_TIMERS shall also be defined by the implementation to
have the value 200112L."
If this doesn't work, I'll add more hacks for Darwin.
llvm-svn: 171565
wall time, user time, and system time since a process started.
For walltime, we currently use TimeValue's interface and a global
initializer to compute a close approximation of total process runtime.
For user time, this adds support for an somewhat more precise timing
mechanism -- clock_gettime with the CLOCK_PROCESS_CPUTIME_ID clock
selected.
For system time, we have to do a full getrusage call to extract the
system time from the OS. This is expensive but unavoidable.
In passing, clean up the implementation of the old APIs and fix some
latent bugs in the Windows code. This might have manifested on Windows
ARM systems or other systems with strange 64-bit integer behavior.
The old API for this both user time and system time simultaneously from
a single getrusage call. While this results in fewer system calls, it
also results in a lower precision user time and if only user time is
desired, it introduces a higher overhead. It may be worthwhile to switch
some of the pass timers to not track system time and directly track user
and wall time. The old API also tracked walltime in a confusing way --
it just set it to the current walltime rather than providing any measure
of wall time since the process started the way buth user and system time
are tracked. The new API is more consistent here.
The plan is to eventually implement these methods for a *child* process
by using the wait3(2) system call to populate an rusage struct
representing the whole subprocess execution. That way, after waiting on
a child process its stats will become accurate and cheap to query.
llvm-svn: 171551
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
llvm-svn: 171366
utils/sort_includes.py script.
Most of these are updating the new R600 target and fixing up a few
regressions that have creeped in since the last time I sorted the
includes.
llvm-svn: 171362
Implement the old API in terms of the new one. This simplifies the
implementation on Windows which can now re-use the self_process's once
initialization.
llvm-svn: 171330
Fix a truly odd namespace qualifier that was flat out wrong in the
process. The fully qualified namespace would have been
llvm::sys::TimeValue, llvm::TimeValue makes no sense.
llvm-svn: 171292
The coding style used here is not LLVM's style because this is modeled
after a Boost interface and thus done in the style of a candidate C++
standard library interface. I'll probably end up proposing it as
a standard C++ library if it proves to be reasonably portable and
useful.
This is just the most basic parts of the interface -- getting the
process ID out of it. However, it helps sketch out some of the boiler
plate such as the base class, derived class, shared code, and static
factory function. It also introduces a unittest so that I can
incrementally ensure this stuff works.
However, I've not even compiled this code for Windows yet. I'll try to
fix any Windows fallout from the bots, and if I can't fix it I'll revert
and get someone on Windows to help out. There isn't a lot more that is
mandatory, so soon I'll switch to just stubbing out the Windows side and
get Michael Spencer to help with implementation as he can test it
directly.
llvm-svn: 171289
structures to and from YAML using traits. The first client will
be the test suite of lld. The documentation will show up at:
http://llvm.org/docs/YamlIO.html
llvm-svn: 170019
textually as NativeClient. Also added a link to the native client project for
readers unfamiliar with it.
A Clang patch will follow shortly.
llvm-svn: 169291
