operator* on the by-operand iterators to return a MachineOperand& rather than
a MachineInstr&. At this point they almost behave like normal iterators!
Again, this requires making some existing loops more verbose, but should pave
the way for the big range-based for-loop cleanups in the future.
llvm-svn: 203865
When initializing an iterator, we may have to step forward to find the first
operand that passes the current filter set. When doing that stepping, we should
always step one operand at a time, even if this is by-instr or by-bundle iterator,
as we're stepping between invalid values, so the stride doesn't make sense there.
Fixes a miscompilation of YASM on Win32 reported by Hans Wennborg. I have not
yet figured out how to reduce it to something testcase-able, because it's sensitive
to the details of how the registers get spilled.
llvm-svn: 203852
This patch fixes the bug in peephole optimization that folds a load which defines one vreg into the one and only use of that vreg. With debug info, a DBG_VALUE that referenced the vreg considered to be a use, preventing the optimization. The fix is to ignore DBG_VALUE's during the optimization, and undef a DBG_VALUE that references a vreg that gets removed.
Patch by Trevor Smigiel!
llvm-svn: 203829
for use with C++11 range-based for-loops.
The gist of phase 1 is to remove the skipInstruction() and skipBundle()
methods from these iterators, instead splitting each iterator into a version
that walks operands, a version that walks instructions, and a version that
walks bundles. This has the result of making some "clever" loops in lib/CodeGen
more verbose, but also makes their iterator invalidation characteristics much
more obvious to the casual reader. (Making them concise again in the future is a
good motivating case for a pre-incrementing range adapter!)
Phase 2 of this undertaking with consist of removing the getOperand() method,
and changing operator*() of the operand-walker to return a MachineOperand&. At
that point, it should be possible to add range views for them that work as one
might expect.
llvm-svn: 203757
The syntax for "cmpxchg" should now look something like:
cmpxchg i32* %addr, i32 42, i32 3 acquire monotonic
where the second ordering argument gives the required semantics in the case
that no exchange takes place. It should be no stronger than the first ordering
constraint and cannot be either "release" or "acq_rel" (since no store will
have taken place).
rdar://problem/15996804
llvm-svn: 203559
First: refactor out the emission of entries into the .debug_loc section
into its own routine.
Second: add a new class ByteStreamer that can be used to either emit
using an AsmPrinter or hash using DIEHash the series of bytes that
would be emitted. Use this in all of the location emission routines
for the .debug_loc section.
No functional change intended outside of a few additional comments
in verbose assembly.
llvm-svn: 203304
The old system was fairly convoluted:
* A temporary label was created.
* A single PROLOG_LABEL was created with it.
* A few MCCFIInstructions were created with the same label.
The semantics were that the cfi instructions were mapped to the PROLOG_LABEL
via the temporary label. The output position was that of the PROLOG_LABEL.
The temporary label itself was used only for doing the mapping.
The new CFI_INSTRUCTION has a 1:1 mapping to MCCFIInstructions and points to
one by holding an index into the CFI instructions of this function.
I did consider removing MMI.getFrameInstructions completelly and having
CFI_INSTRUCTION own a MCCFIInstruction, but MCCFIInstructions have non
trivial constructors and destructors and are somewhat big, so the this setup
is probably better.
The net result is that we don't create temporary labels that are never used.
llvm-svn: 203204
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
llvm-svn: 203083
already lived there and it is where it belongs -- this is the in-memory
debug location representation.
This is just cleanup -- Modules can actually cope with this, but that
doesn't make it right. After chatting with folks that have out-of-tree
stuff, going ahead and moving the rest of the headers seems preferable.
llvm-svn: 202960
selection dag (PR19012)
In X86SelectionDagInfo::EmitTargetCodeForMemcpy we check with MachineFrameInfo
to make sure that ESI isn't used as a base pointer register before we choose to
emit rep movs (which clobbers esi).
The problem is that MachineFrameInfo wouldn't know about dynamic allocas or
inline asm that clobbers the stack pointer until SelectionDAGBuilder has
encountered them.
This patch fixes the problem by checking for such things when building the
FunctionLoweringInfo.
Differential Revision: http://llvm-reviews.chandlerc.com/D2954
llvm-svn: 202930
directly care about the Value class (it is templated so that the key can
be any arbitrary Value subclass), it is in fact concretely tied to the
Value class through the ValueHandle's CallbackVH interface which relies
on the key type being some Value subclass to establish the value handle
chain.
Ironically, the unittest is already in the right library.
llvm-svn: 202824
Move the test for this class into the IR unittests as well.
This uncovers that ValueMap too is in the IR library. Ironically, the
unittest for ValueMap is useless in the Support library (honestly, so
was the ValueHandle test) and so it already lives in the IR unittests.
Mmmm, tasty layering.
llvm-svn: 202821
The previous PBQP solver was very robust but consumed a lot of memory,
performed a lot of redundant computation, and contained some unnecessarily tight
coupling that prevented experimentation with novel solution techniques. This new
solver is an attempt to address these shortcomings.
Important/interesting changes:
1) The domain-independent PBQP solver class, HeuristicSolverImpl, is gone.
It is replaced by a register allocation specific solver, PBQP::RegAlloc::Solver
(see RegAllocSolver.h).
The optimal reduction rules and the backpropagation algorithm have been extracted
into stand-alone functions (see ReductionRules.h), which can be used to build
domain specific PBQP solvers. This provides many more opportunities for
domain-specific knowledge to inform the PBQP solvers' decisions. In theory this
should allow us to generate better solutions. In practice, we can at least test
out ideas now.
As a side benefit, I believe the new solver is more readable than the old one.
2) The solver type is now a template parameter of the PBQP graph.
This allows the graph to notify the solver of any modifications made (e.g. by
domain independent rules) without the overhead of a virtual call. It also allows
the solver to supply policy information to the graph (see below).
3) Significantly reduced memory overhead.
Memory management policy is now an explicit property of the PBQP graph (via
the CostAllocator typedef on the graph's solver template argument). Because PBQP
graphs for register allocation tend to contain many redundant instances of
single values (E.g. the value representing an interference constraint between
GPRs), the new RASolver class uses a uniquing scheme. This massively reduces
memory consumption for large register allocation problems. For example, looking
at the largest interference graph in each of the SPEC2006 benchmarks (the
largest graph will always set the memory consumption high-water mark for PBQP),
the average memory reduction for the PBQP costs was 400x. That's times, not
percent. The highest was 1400x. Yikes. So - this is fixed.
"PBQP: No longer feasting upon every last byte of your RAM".
Minor details:
- Fully C++11'd. Never copy-construct another vector/matrix!
- Cute tricks with cost metadata: Metadata that is derived solely from cost
matrices/vectors is attached directly to the cost instances themselves. That way
if you unique the costs you never have to recompute the metadata. 400x less
memory means 400x less cost metadata (re)computation.
Special thanks to Arnaud de Grandmaison, who has been the source of much
encouragement, and of many very useful test cases.
This new solver forms the basis for future work, of which there's plenty to do.
I will be adding TODO notes shortly.
- Lang.
llvm-svn: 202551
CodeGenPrepare uses extensively TargetLowering which is part of libLLVMCodeGen.
This is a layer violation which would introduce eventually a dependence on
CodeGen in ScalarOpts.
Move CodeGenPrepare into libLLVMCodeGen to avoid that.
Follow-up of <rdar://problem/15519855>
llvm-svn: 201912
r201608 made llvm corretly handle private globals with MachO. r201622 fixed
a bug in it and r201624 and r201625 were changes for using private linkage,
assuming that llvm would do the right thing.
They all got reverted because r201608 introduced a crash in LTO. This patch
includes a fix for that. The issue was that TargetLoweringObjectFile now has
to be initialized before we can mangle names of private globals. This is
trivially true during the normal codegen pipeline (the asm printer does it),
but LTO has to do it manually.
llvm-svn: 201700
The same code (~20 lines) for initializing a TargetOptions object from CodeGen
cmdline flags is duplicated 4 times in 4 different tools. This patch moves it
into a utility function.
Since the CodeGen/CommandFlags.h file defines cl::opt flags in a header, it's
a bit of a touchy situation because we should only link them into tools. So this
patch puts the init function in the header.
llvm-svn: 201699
The IR
@foo = private constant i32 42
is valid, but before this patch we would produce an invalid MachO from it. It
was invalid because it would use an L label in a section where the liker needs
the labels in order to atomize it.
One way of fixing it would be to just reject this IR in the backend, but that
would not be very front end friendly.
What this patch does is use an 'l' prefix in sections that we know the linker
requires symbols for atomizing them. This allows frontends to just use
private and not worry about which sections they go to or how the linker handles
them.
One small issue with this strategy is that now a symbol name depends on the
section, which is not available before codegen. This is not a problem in
practice. The reason is that it only happens with private linkage, which will
be ignored by the non codegen users (llvm-nm and llvm-ar).
llvm-svn: 201608
