Summary:
In the DAG pattern backend, `SimplifyTree` simplifies a pattern by
removing bitconverts between two identical types. But that function is
also run on the fragments list in instances of `PatFrags`, in which
the types haven't been specified yet. So the input and output of the
bitconvert always evaluate to the empty set of types, which makes them
compare equal. So the test always passes, and bitconverts are
unconditionally removed from the PatFrag RHS.
Fixed by spotting the empty type set and using it to inhibit the
optimization.
Reviewers: nhaehnle, hfinkel
Reviewed By: nhaehnle
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74627
This reverts commit 80a34ae31125aa46dcad47162ba45b152aed968d with fixes.
Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.
This reverts commit 80a34ae31125aa46dcad47162ba45b152aed968d with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
Tablegen's DAGISelMatcher emits integers in a VBR format,
so if an integer is below 128 it can fit into a single
byte, otherwise high bit is set, next byte is used etc.
MatcherTable is essentially an unsigned char table. When
SelectionDAGISel parses the table it does a reverse translation.
In a situation when numeric value of an integer to emit is
unknown it can be emitted not as OPC_EmitInteger but as
OPC_EmitStringInteger using a symbolic name of the value.
In this situation the value should not exceed 127.
One of the situations when OPC_EmitStringInteger is used is
if we need to emit a subreg into a matcher table. However,
number of subregs can exceed 127. Currently last defined subreg
for AMDGPU is 192. That results in a silent bug in the ISel
with matcher reading from an invalid offset.
Fixed this bug to emit actual VBR encoded value for a subregs
which value exceeds 127.
Differential Revision: https://reviews.llvm.org/D74368
This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.
There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.
Summary:
There are a few field init values that are concrete but not complete/foldable (e.g. `?`). This allows for using those values as initializers without erroring out.
Example:
```
class A {
string value = ?;
}
class B<A impl> : A {
let value = impl.value; // This currently emits an error.
let value = ?; // This doesn't emit an error.
}
```
Differential Revision: https://reviews.llvm.org/D74360
Summary:
The following example gives the error message "expected value of type
'bits<32>', got 'bit'" on the assignment.
class Instruction { bits<32> encoding; }
def foo: Instruction { let encoding{10} = !eq(0, 1); }
But there's nothing wrong with this code: 'bit' is a perfectly good
type for the RHS of an assignment to a //single bit// of an
instruction encoding.
The problem is that `ParseBodyItem` is accidentally type-checking the
RHS against the full type of the `encoding` field, without adjusting
it in the case where we're only assigning to a subset of the bits. The
fix is trivial.
Reviewers: nhaehnle, hfinkel
Reviewed By: hfinkel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74220
This previously only handled EXTRACT_SUBREGs from leafs, such as
operands directly in the original output. Handle extracting from a
result instruction.
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
Summary:
This allows you to make some of the defs in a multiclass or `foreach`
conditional on an expression computed from the parameters or iteration
variables.
It was already possible to simulate an if statement using a `foreach`
with a dummy iteration variable and a list constructed using `!if` so
that it had length 0 or 1 depending on the condition, e.g.
foreach unusedIterationVar = !if(condition, [1], []<int>) in { ... }
But this syntax is nicer to read, and also more convenient because it
allows an else clause.
To avoid upheaval in the implementation, I've implemented `if` as pure
syntactic sugar on the `foreach` implementation: internally, `ParseIf`
actually does construct exactly the kind of foreach shown above (and
another reversed one for the else clause if present).
Reviewers: nhaehnle, hfinkel
Reviewed By: hfinkel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71474
Summary:
This allows you to define a global or local variable to an arbitrary
value, and refer to it in subsequent definitions.
The main use I anticipate for this is if you have to compute some
difficult function of the parameters of a multiclass, and then use it
many times. For example:
multiclass Foo<int i, string s> {
defvar op = !cast<BaseClass>("whatnot_" # s # "_" # i);
def myRecord {
dag a = (op this, (op that, the other), (op x, y, z));
int b = op.subfield;
}
def myOtherRecord<"template params including", op>;
}
There are a couple of ways to do this already, but they're not really
satisfactory. You can replace `defvar x = y` with a loop over a
singleton list, `foreach x = [y] in { ... }` - but that's unintuitive
to someone who hasn't seen that workaround idiom before, and requires
an extra pair of braces that you often didn't really want. Or you can
define a nested pair of multiclasses, with the inner one taking `x` as
a template parameter, and the outer one instantiating it just once
with the desired value of `x` computed from its other parameters - but
that makes it awkward to sequentially compute each value based on the
previous ones. I think `defvar` makes things considerably easier.
You can also use `defvar` at the top level, where it inserts globals
into the same map used by `defset`. That allows you to define global
constants without having to make a dummy record for them to live in:
defvar MAX_BUFSIZE = 512;
// previously:
// def Dummy { int MAX_BUFSIZE = 512; }
// and then refer to Dummy.MAX_BUFSIZE everywhere
Reviewers: nhaehnle, hfinkel
Reviewed By: hfinkel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71407
For arguments that are not expected to be materialized with
G_CONSTANT, this was emitting predicates which could never match. It
was first adding a meaningless LLT check, which would always fail due
to the operand not being a register.
Infer the cases where a literal should check for an immediate operand,
instead of a register This avoids needing to invent a special way of
representing timm literal values.
Also handle immediate arguments in GIM_CheckLiteralInt. The comments
stated it handled isImm() and isCImm(), but that wasn't really true.
This unblocks work on the selection of all of the complicated AMDGPU
intrinsics in future commits.
The current implementation assumes there is an instruction associated
with the transform, but this is not the case for
timm/TargetConstant/immarg values. These transforms should directly
operate on a specific MachineOperand in the source
instruction. TableGen would assert if you attempted to define an
equivalent GISDNodeXFormEquiv using timm when it failed to find the
instruction matcher.
Specially recognize SDNodeXForms on timm, and pass the operand index
to the render function.
Ideally this would be a separate render function type that looks like
void renderFoo(MachineInstrBuilder, const MachineOperand&), but this
proved to be somewhat mechanically painful. Add an optional operand
index which will only be passed if the transform should only look at
the one source operand.
Theoretically it would also be possible to only ever pass the
MachineOperand, and the existing renderers would check the parent. I
think that would be somewhat ugly for the standard usage which may
want to inspect other operands, and I also think MachineOperand should
eventually not carry a pointer to the parent instruction.
Use it in one sample pattern. This isn't a great example, since the
transform exists to satisfy DAG type constraints. This could also be
avoided by just changing the MachineInstr's arbitrary choice of
operand type from i16 to i32. Other patterns have nontrivial uses, but
this serves as the simplest example.
One flaw this still has is if you try to use an SDNodeXForm defined
for imm, but the source pattern uses timm, you still see the "Failed
to lookup instruction" assert. However, there is now a way to avoid
it.
Summary:
GIMatchTree's job is to build a decision tree by zipping all the
GIMatchDag's together.
Each DAG is added to the tree builder as a leaf and partitioners are used
to subdivide each node until there are no more partitioners to apply. At
this point, the code generator is responsible for testing any untested
predicates and following any unvisited traversals (there shouldn't be any
of the latter as the getVRegDef partitioner handles them all).
Note that the leaves don't always fit into partitions cleanly and the
partitions may overlap as a result. This is resolved by cloning the leaf
into every partition it belongs to. One example of this is a rule that can
match one of N opcodes. The leaf for this rule would end up in N partitions
when processed by the opcode partitioner. A similar example is the
getVRegDef partitioner where having rules (add $a, $b), and (add ($a, $b), $c)
will result in the former being in the partition for successfully
following the vreg-def and failing to do so as it doesn't care which
happens.
Depends on D69151
Fixed the issues with the windows bots which were caused by stdout/stderr
interleaving.
Reviewers: bogner, volkan
Reviewed By: volkan
Subscribers: lkail, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69152
Copy the logic from the existing handling in the DAG matcher emittter.
This will enable some AMDGPU pattern cleanups without breaking
GlobalISel tests, and eventually handle importing more patterns.
The test is a bit annoying since the sections seem to randomly sort
themselves if anything else is added in the future.
All the windows bots are failing match-tree.td and there's no obvious cause that
I can see. It's not just the %p formatting problem. My best guess is that
there's an ordering issue too but I'll need further information to figure that
out. Revert while I'm investigating.
This reverts commit 64f1bb5cd2c6d69af7c74ec68840029603560238 and 77d4b5f5feff663e70b347516cc4c77fa5cd2a20
Summary:
GIMatchTree's job is to build a decision tree by zipping all the
GIMatchDag's together.
Each DAG is added to the tree builder as a leaf and partitioners are used
to subdivide each node until there are no more partitioners to apply. At
this point, the code generator is responsible for testing any untested
predicates and following any unvisited traversals (there shouldn't be any
of the latter as the getVRegDef partitioner handles them all).
Note that the leaves don't always fit into partitions cleanly and the
partitions may overlap as a result. This is resolved by cloning the leaf
into every partition it belongs to. One example of this is a rule that can
match one of N opcodes. The leaf for this rule would end up in N partitions
when processed by the opcode partitioner. A similar example is the
getVRegDef partitioner where having rules (add $a, $b), and (add ($a, $b), $c)
will result in the former being in the partition for successfully
following the vreg-def and failing to do so as it doesn't care which
happens.
Depends on D69151
Reviewers: bogner, volkan
Reviewed By: volkan
Subscribers: lkail, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69152
This assumed a single pattern if there was a predicate. Relax this a
bit, and allow multiple patterns as long as they have the same class.
This was only broken for the DAG path. GlobalISel seems to have
handled this correctly already.
This reverts commit e62e760f29567fe0841af870c65a4f8ef685d217.
The issue @uweigand raised should have been fixed by iterating over the
vector that owns the operand list data instead of the FoldingSet.
The MSVC issue raised by @thakis should have been fixed by relaxing the
regexes a little. I don't have a Windows machine available to test that so
I tested it by using `perl -p -e 's/0x([0-9a-f]+)/\U\1\E/g' to convert the
output of %p to the windows style.
I've guessed at the issue @phosek raised as there wasn't enough information
to investigate it. What I think is happening on that bot is the -debug
option isn't available because the second stage build is a release build.
I'm not sure why other release-mode bots didn't report it though.
and follow-on patches.
This is breaking a few build bots and local builds with follow-up already
on the patch thread.
This reverts commits 390c8baa5440dda8907688d9ef860f6982bd925f and
520e3d66e7257c77f1226185504bbe1cb90afcfa.
Summary:
When we build the walk across these DAG's we need to be able to reach every node
from the roots. Flip and traversal edges (so that use->def becomes def->uses)
that make nodes unreachable. Note that early on we'll just error out on these
flipped edges as def->uses edges are more complicated to match due to their
one->many nature.
Depends on D69077
Reviewers: volkan, bogner
Subscribers: llvm-commits
Summary:
The MatchDag structure is a representation of the checks that need to be
performed and the dependencies that limit when they can happen.
There are two kinds of node in the MatchDag:
* Instrs - Represent a MachineInstr
* Predicates - Represent a check that needs to be performed (i.e. opcode, is register, same machine operand, etc.)
and two kinds of edges:
* (Traversal) Edges - Represent a register that can be traversed to find one instr from another
* Predicate Dependency Edges - Indicate that a predicate requires a piece of information to be tested.
For example, the matcher:
(match (MOV $t, $s),
(MOV $d, $t))
with MOV declared as an instruction of the form:
%dst = MOV %src1
becomes the following MatchDag with the following instruction nodes:
__anon0_0 // $t=getOperand(0), $s=getOperand(1)
__anon0_1 // $d=getOperand(0), $t=getOperand(1)
traversal edges:
__anon0_1[src1] --[t]--> __anon0_0[dst]
predicate nodes:
<<$mi.getOpcode() == MOV>>:$__anonpred0_2
<<$mi.getOpcode() == MOV>>:$__anonpred0_3
and predicate dependencies:
__anon0_0 ==> __anonpred0_2[mi]
__anon0_0 ==> __anonpred0_3[mi]
The result of this parse is currently unused but can be tested
using -gicombiner-stop-after-parse as done in parse-match-pattern.td. The
dump for testing includes a graphviz format dump to allow the rule to be
viewed visually.
Later on, these MatchDag's will be used to generate code and to build an
efficient decision tree.
Reviewers: volkan, bogner
Reviewed By: volkan
Subscribers: arsenm, mgorny, mgrang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69077
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
Summary:
These allow you to get and set the operator of a dag node, without
affecting its list of arguments.
`!getop` is slightly fiddly because in many contexts you need its
return value to have a static type more specific than 'any record'. It
works to say `!cast<BaseClass>(!getop(...))`, but it's cumbersome, so
I made `!getop` take an optional type suffix itself, so that can be
written as the shorter `!getop<BaseClass>(...)`.
Reviewers: hfinkel, nhaehnle
Reviewed By: nhaehnle
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71191
This is not a new semantic feature. The syntax `(? 1, 2, 3)` was
disallowed by the parser in a dag //expression//, but there were
already ways to sneak a `?` into the operator field of a dag
//value//, e.g. by initializing it from a class template parameter
which is then set to `?` by the instantiating `def`.
This patch makes `?` in the operator slot syntactically legal, so it's
now easy to construct dags with an unset operator. Also, the semantics
of `!con` are relaxed so that it will allow a combination of set and
unset operator fields in the dag nodes it's concatenating, with the
restriction that all the operators that are //not// unset still have
to agree with each other.
Reviewers: hfinkel, nhaehnle
Reviewed By: hfinkel, nhaehnle
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71195
This error was originally added a while(7 years) ago when
including multiple files was basically always an error. Tablegen
now has preprocessor support, which allows for building nice
c/c++ style include guards. With the current error being
reported, we unfortunately need to double guard when including
files:
* In user of MyFile.td
#ifndef MYFILE_TD
include MyFile.td
#endif
* In MyFile.td
#ifndef MYFILE_TD
#define MYFILE_TD
...
#endif
Differential Revision: https://reviews.llvm.org/D70410
If there is a dag node with a variable number of operands that has at
least N operands (for some non-negative N), and multiple patterns with
that node with different number of operands, we would drop the number of
operands check in patterns with N operands, presumably because it's
guaranteed in such case that none of the per-operand checks will access
the operand list out-of-bounds.
Except semantically the check is about having exactly N operands, not at
least N operands, and a backend might rely on it to disambiguate
different patterns.
In this patch we change the condition on emitting the number of operands
check from "the instruction is not guaranteed to have at least as many
operands as are checked by the pattern being matched" to "the
instruction is not guaranteed to have a specific number of operands".
We're relying (still) on the rest of the CodeGenPatterns mechanics to
validate that the pattern itself doesn't try to access more operands
than there is in the instruction in cases when the instruction does have
fixed number of operands, and on the machine verifier to validate at
runtime that particular MIs like that satisfy the constraint as well.
Reviewers: dsanders, qcolombet
Reviewed By: qcolombet
Subscribers: arsenm, rovka, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69653
Assume that, ModelA has scheduling resource for InstA and ModelB has scheduling resource for InstB. This is what the llvm::MCSchedClassDesc looks like:
llvm::MCSchedClassDesc ModelASchedClasses[] = {
...
InstA, 0, ...
InstB, -1,...
};
llvm::MCSchedClassDesc ModelBSchedClasses[] = {
...
InstA, -1,...
InstB, 0,...
};
The -1 means invalid num of macro ops, while it is valid if it is >=0. This is what we look like now:
llvm::MCSchedClassDesc ModelASchedClasses[] = {
...
InstA, 0, ...
InstB, 0,...
};
llvm::MCSchedClassDesc ModelBSchedClasses[] = {
...
InstA, 0,...
InstB, 0,...
};
And compiler hit the assertion here because the SCDesc is valid now for both InstA and InstB.
Differential Revision: https://reviews.llvm.org/D67950
llvm-svn: 374524
When an instruction has an encoding definition for only a subset of
the available HwModes, ensure we just avoid generating an encoding
rather than crash.
llvm-svn: 374150
https://reviews.llvm.org/D66773
The OpTypes::OperandType was creating an enum for all records that
inherit from Operand, but in reality there are operands for instructions
that inherit from other types too. In particular, RegisterOperand and
RegisterClass. This commit adds those types to the list of operand types
that are tracked by the OperandType enum.
Patch by: nlguillemot
llvm-svn: 372641
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
Much like ValueTypeByHwMode/RegInfoByHwMode, this patch allows targets
to modify an instruction's encoding based on HwMode. When the
EncodingInfos field is non-empty the Inst and Size fields of the Instruction
are ignored and taken from EncodingInfos instead.
As part of this promote getHwMode() from TargetSubtargetInfo to MCSubtargetInfo.
This is NFC for all existing targets - new code is generated only if targets
use EncodingByHwMode.
llvm-svn: 372320
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
Encode them directly as an imm argument to G_INTRINSIC*.
Since now intrinsics can now define what parameters are required to be
immediates, avoid using registers for them. Intrinsics could
potentially want a constant that isn't a legal register type. Also,
since G_CONSTANT is subject to CSE and legalization, transforms could
potentially obscure the value (and create extra work for the
selector). The register bank of a G_CONSTANT is also meaningful, so
this could throw off future folding and legalization logic for AMDGPU.
This will be much more convenient to work with than needing to call
getConstantVRegVal and checking if it may have failed for every
constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
immarg operands, many of which need inspection during lowering. Having
to find the value in a register is going to add a lot of boilerplate
and waste compile time.
SelectionDAG has always provided TargetConstant for constants which
should not be legalized or materialized in a register. The distinction
between Constant and TargetConstant was somewhat fuzzy, and there was
no automatic way to force usage of TargetConstant for certain
intrinsic parameters. They were both ultimately ConstantSDNode, and it
was inconsistently used. It was quite easy to mis-select an
instruction requiring an immediate. For SelectionDAG, start emitting
TargetConstant for these arguments, and using timm to match them.
Most of the work here is to cleanup target handling of constants. Some
targets process intrinsics through intermediate custom nodes, which
need to preserve TargetConstant usage to match the intrinsic
expectation. Pattern inputs now need to distinguish whether a constant
is merely compatible with an operand or whether it is mandatory.
The GlobalISelEmitter needs to treat timm as a special case of a leaf
node, simlar to MachineBasicBlock operands. This should also enable
handling of patterns for some G_* instructions with immediates, like
G_FENCE or G_EXTRACT.
This does include a workaround for a crash in GlobalISelEmitter when
ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372285
Summary:
Also fixup rL371928 for cases that occur on our out-of-tree backend
There were still quite a few intermediate APInts and this caused the
compile time of MCCodeEmitter for our target to jump from 16s up to
~5m40s. This patch, brings it back down to ~17s by eliminating pretty
much all of them using two new APInt functions (extractBitsAsZExtValue(),
insertBits() but with a uint64_t). The exact conditions for eliminating
them is that the field extracted/inserted must be <=64-bit which is
almost always true.
Note: The two new APInt API's assume that APInt::WordSize is at least
64-bit because that means they touch at most 2 APInt words. They
statically assert that's true. It seems very unlikely that someone
is patching it to be smaller so this should be fine.
Reviewers: jmolloy
Reviewed By: jmolloy
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67686
llvm-svn: 372243
Some VLIW instruction sets are Very Long Indeed. Using uint64_t constricts the Inst encoding to 64 bits (naturally).
This change switches CodeEmitter to a mode that uses APInts when Inst's bitwidth is > 64 bits (NFC for existing targets).
When Inst.BitWidth > 64 the prototype changes to:
void TargetMCCodeEmitter::getBinaryCodeForInstr(const MCInst &MI,
SmallVectorImpl<MCFixup> &Fixups,
APInt &Inst,
APInt &Scratch,
const MCSubtargetInfo &STI);
The Inst parameter returns the encoded instruction, the Scratch parameter is used internally for manipulating operands and is exposed so that the underlying storage can be reused between calls to getBinaryCodeForInstr. The goal is to elide any APInt constructions that we can.
Similarly the operand encoding prototype changes to:
getMachineOpValue(const MCInst &MI, const MCOperand &MO, APInt &op, SmallVectorImpl<MCFixup> &Fixups, const MCSubtargetInfo &STI);
That is, the operand is passed by reference as APInt rather than returned as uint64_t.
To reiterate, this APInt mode is enabled only when Inst.BitWidth > 64, so this change is NFC for existing targets.
llvm-svn: 371928
The scalar f64 patterns don't work yet because they fail on multiple
results from the unused implicit def of scc in the result bit
operation.
llvm-svn: 371542
