switch to using one indirect stub manager per logical dylib rather than one per
input module.
LogicalDylib is a helper class used by the CompileOnDemandLayer to manage
symbol resolution between modules during lazy compilation. In particular, it
ensures that internal symbols resolve correctly even in the case where multiple
input modules contain the same internal symbol name (which must to be promoted
to external hidden linkage so that functions in any given module can be split
out by lazy compilation). LogicalDylib's resolution scheme (before this commit)
required one stub-manager per input module. This made recompilation of functions
(by adding a module containing a new definition) difficult, as the stub manager
for any given symbol was bound to the module that supplied the original
definition. By using one stubs manager for the whole logical dylib symbols can
be more easily replaced, although support for doing this is not included in this
patch (it will be implemented in a follow up).
llvm-svn: 279952
It breaks ExecutionEngine/OrcLazy/weak-function.ll on most bots.
Script:
--
...
--
Exit Code: 1
Command Output (stderr):
--
Could not find main function.
llvm-svn: 277907
This adds partial support for weak functions to the CompileOnDemandLayer by
modifying the addLogicalModule method to check for existing stub definitions
before building a new stub for a weak function. This scheme is sufficient to
support ODR definitions, but fails for general weak definitions if strong
definition is encountered after the first weak definition. (A more extensive
refactor will be required to fully support weak symbols).
This patch does *not* add weak symbol support to RuntimeDyld: I hope to add
that in the near future.
llvm-svn: 277896
LLI already supported passing multiple input modules to MCJIT via the
-extra-module option. This patch adds the plumbing to pass these modules to
the OrcLazy JIT too.
This functionality will be used in an upcoming test case for weak symbol
handling.
llvm-svn: 277521
This patch replaces RuntimeDyld::SymbolInfo with JITSymbol: A symbol class
that is capable of lazy materialization (i.e. the symbol definition needn't be
emitted until the address is requested). This can be used to support common
and weak symbols in the JIT (though this is not implemented in this patch).
For consistency, RuntimeDyld::SymbolResolver is renamed to JITSymbolResolver.
For space efficiency a new class, JITEvaluatedSymbol, is introduced that
behaves like the old RuntimeDyld::SymbolInfo - i.e. it is just a pair of an
address and symbol flags. Instances of JITEvaluatedSymbol can be used in
symbol-tables to avoid paying the space cost of the materializer.
llvm-svn: 277386
We are currently using add_llvm_utility for executable targets that:
1. Are built by default.
2. Used for testing.
3. Are not installed by default.
Originally, lli-child-target used add_llvm_tool instead of add_llvm_executable
directly. This was changed so that lli-child-target would not be installed. This
was good since this is only used for testing and should never be installed for
users. This also had the unfortunate side effect that one can never turn off the
building of lli-child-target by default, a regression for projects that by
default do not want to compile any LLVM tools beyond tablegen/llvm-config.
This patch changes lli-child-target to use add_llvm_utility. This makes sense
since:
1. lli-child-target matches the semantics of executables created with
add_llvm_utility.
2. We fix the regression since now one can use the flag LLVM_BUILD_UTILS to
eliminate default compilation.
llvm-svn: 275008
looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
llvm-svn: 272232
As suggested by clang-tidy's performance-unnecessary-copy-initialization.
This can easily hit lifetime issues, so I audited every change and ran the
tests under asan, which came back clean.
llvm-svn: 272126
This tidies up some code that was manually constructing RuntimeDyld::SymbolInfo
instances from JITSymbols. It will save more mess in the future when
JITSymbol::getAddress is extended to return an Expected<TargetAddress> rather
than just a TargetAddress, since we'll be able to embed the error checking in
the conversion.
llvm-svn: 271350
searching for external symbols, and fall back to the SymbolResolver::findSymbol
method if the former returns null.
This makes RuntimeDyld behave more like a static linker: Symbol definitions
from within the current module's "logical dylib" will be preferred to
external definitions. We can build on this behavior in the future to properly
support weak symbol handling.
Custom symbol resolvers that override the findSymbolInLogicalDylib method may
notice changes due to this patch. Clients who have not overridden this method
should generally be unaffected, however users of the OrcMCJITReplacement class
may notice changes.
llvm-svn: 270716
Having an enum member named Default is quite confusing: Is it distinct
from the others?
This patch removes that member and instead uses Optional<Reloc> in
places where we have a user input that still hasn't been maped to the
default value, which is now clear has no be one of the remaining 3
options.
llvm-svn: 269988
This replaces use of std::error_code and ErrorOr in the ORC RPC support library
with Error and Expected. This required updating the OrcRemoteTarget API, Client,
and server code, as well as updating the Orc C API.
This patch also fixes several instances where Errors were dropped.
llvm-svn: 267457
Three problems:
1. <future> can't be easily used. If you must use it, see
include/Support/ThreadPool.h for how.
2. constexpr problems, even after 266588.
3. Move assignment operators can't be defaulted in MSVC2013.
llvm-svn: 266615
asynchronous call/handle. Also updates the ORC remote JIT API to use the new
scheme.
The previous version of the RPC tools only supported void functions, and
required the user to manually call a paired function to return results. This
patch replaces the Procedure typedef (which only supported void functions) with
the Function typedef which supports return values, e.g.:
Function<FooId, int32_t(std::string)> Foo;
The RPC primitives and channel operations are also expanded. RPC channels must
support four new operations: startSendMessage, endSendMessage,
startRecieveMessage and endRecieveMessage, to handle channel locking. In
addition, serialization support for tuples to RPCChannels is added to enable
multiple return values.
The RPC primitives are expanded from callAppend, call, expect and handle, to:
appendCallAsync - Make an asynchronous call to the given function.
callAsync - The same as appendCallAsync, but calls send on the channel when
done.
callSTHandling - Blocking call for single-threaded code. Wraps a call to
callAsync then waits on the result, using a user-supplied
handler to handle any callbacks from the remote.
callST - The same as callSTHandling, except that it doesn't handle
callbacks - it expects the result to be the first return.
expect and handle - as before.
handleResponse - Handle a response from the remote.
waitForResult - Wait for the response with the given sequence number to arrive.
llvm-svn: 266581
At the same time, fixes InstructionsTest::CastInst unittest: yes
you can leave the IR in an invalid state and exit when you don't
destroy the context (like the global one), no longer now.
This is the first part of http://reviews.llvm.org/D19094
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266379
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
llvm-svn: 265606
This patch adds a new class, OrcI386, which contains the hooks needed to
support lazy-JITing on i386 (currently only for Pentium 2 or above, as the JIT
re-entry code uses the FXSAVE/FXRSTOR instructions).
Support for i386 is enabled in the LLI lazy JIT and the Orc C API, and
regression and unit tests are enabled for this architecture.
llvm-svn: 260338
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
classes.
OrcRemoteTargetClient::RCMemoryManager will now register EH frames with the
server automatically. This allows remote-execution of code that uses exceptions.
llvm-svn: 257816
The new ORC remote-JITing support provides a superset of the old code's
functionality, so we can replace the old stuff. As a bonus, a couple of
previously XFAILed tests have started passing.
llvm-svn: 257343
This inlines materializeAll into the only caller
(materializeAllPermanently) and renames materializeAllPermanently to
just materializeAll.
llvm-svn: 256024
This class is turning into a useful interface, rather than an implementation
detail, so I'm dropping the 'Base' suffix.
No functional change.
llvm-svn: 254693
Bypassing LLVM for this has a number of benefits:
1) Laziness support becomes asm-syntax agnostic (previously lazy jitting didn't
work on Windows as the resolver block was in Darwin asm).
2) For cross-process JITs, it allows resolver blocks and trampolines to be
emitted directly in the target process, reducing cross process traffic.
3) It should be marginally faster.
llvm-svn: 251933
memory, rather than representing the stubs in IR. Update the CompileOnDemand
layer to use this functionality.
Directly emitting stubs is much cheaper than building them in IR and codegen'ing
them (see below). It also plays well with remote JITing - stubs can be emitted
directly in the target process, rather than having to send them over the wire.
The downsides are:
(1) Care must be taken when resolving symbols, as stub symbols are held in a
separate symbol table. This is only a problem for layer writers and other
people using this API directly. The CompileOnDemand layer hides this detail.
(2) Aliases of function stubs can't be symbolic any more (since there's no
symbol definition in IR), but must be converted into a constant pointer
expression. This means that modules containing aliases of stubs cannot be
cached. In practice this is unlikely to be a problem: There's no benefit to
caching such a module anyway.
On balance I think the extra performance is more than worth the trade-offs: In a
simple stress test with 10000 dummy functions requiring stubs and a single
executed "hello world" main function, directly emitting stubs reduced user time
for JITing / executing by over 90% (1.5s for IR stubs vs 0.1s for direct
emission).
llvm-svn: 250712
Previously the CompileOnDemand layer always created single-function partitions.
In theory this new API allows for more interesting partitions, though this has
not been well tested yet.
llvm-svn: 249623
Summary:
Replace getDataLayout() with a createDataLayout() method to make
explicit that it is intended to create a DataLayout only and not
accessing it for other purpose.
This change is the last of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned
by the module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11103
(cherry picked from commit 5609fc56bca971e5a7efeaa6ca4676638eaec5ea)
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 243114
This reverts commit 0f720d984f419c747709462f7476dff962c0bc41.
It breaks clang too badly, I need to prepare a proper patch for clang
first.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 243089
Summary:
Replace getDataLayout() with a createDataLayout() method to make
explicit that it is intended to create a DataLayout only and not
accessing it for other purpose.
This change is the last of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned
by the module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11103
(cherry picked from commit 5609fc56bca971e5a7efeaa6ca4676638eaec5ea)
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 243083
Summary:
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10381
llvm-svn: 239815
into partitions. Also, add an option to clone stub definitions (not just decls)
into partitions: these definitions could be inlined in some places to avoid the
overhead of calling via the stub.
Found by inspection - no test case yet, although I plan to add a unit test for
this once the CompileOnDemand layer refactoring settles down.
llvm-svn: 239640
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238602
to use the information in the module rather than TargetOptions.
We've had and clang has used the use-soft-float attribute for some
time now so have the backends set a subtarget feature based on
a particular function now that subtargets are created based on
functions and function attributes.
For the one middle end soft float check go ahead and create
an overloadable TargetLowering::useSoftFloat function that
just checks the TargetSubtargetInfo in all cases.
Also remove the command line option that hard codes whether or
not soft-float is set by using the attribute for all of the
target specific test cases - for the generic just go ahead and
add the attribute in the one case that showed up.
llvm-svn: 237079
and avoid cloning unused decls into every partition.
Module partitioning showed up as a source of significant overhead when I
profiled some trivial test cases. Avoiding the overhead of partitionging
for uncalled functions helps to mitigate this.
This change also means that it is no longer necessary to have a
LazyEmittingLayer underneath the CompileOnDemand layer, since the
CompileOnDemandLayer will not extract or emit function bodies until they are
called.
llvm-svn: 236465
signature match the other layers.
This makes it possible to compose other layers (e.g. IRTransformLayer) on top
of CompileOnDemandLayer.
llvm-svn: 235029
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
llvm-svn: 234679
use these to add support for C++ static ctors/dtors to the Orc-lazy JIT in LLI.
Replace the trivial_retval_1 regression test - the new 'hello' test is covering
strictly more code.
llvm-svn: 233885
MCJIT.
This patch decouples the two responsibilities of the RTDyldMemoryManager class,
memory management and symbol resolution, into two new classes:
RuntimeDyld::MemoryManager and RuntimeDyld::SymbolResolver.
The symbol resolution interface is modified slightly, from:
uint64_t getSymbolAddress(const std::string &Name);
to:
RuntimeDyld::SymbolInfo findSymbol(const std::string &Name);
The latter passes symbol flags along with symbol addresses, allowing RuntimeDyld
and others to reason about non-strong/non-exported symbols.
The memory management interface removes the following method:
void notifyObjectLoaded(ExecutionEngine *EE,
const object::ObjectFile &) {}
as it is not related to memory management. (Note: Backwards compatibility *is*
maintained for this method in MCJIT and OrcMCJITReplacement, see below).
The RTDyldMemoryManager class remains in-tree for backwards compatibility.
It inherits directly from RuntimeDyld::SymbolResolver, and indirectly from
RuntimeDyld::MemoryManager via the new MCJITMemoryManager class, which
just subclasses RuntimeDyld::MemoryManager and reintroduces the
notifyObjectLoaded method for backwards compatibility).
The EngineBuilder class retains the existing method:
EngineBuilder&
setMCJITMemoryManager(std::unique_ptr<RTDyldMemoryManager> mcjmm);
and includes two new methods:
EngineBuilder&
setMemoryManager(std::unique_ptr<MCJITMemoryManager> MM);
EngineBuilder&
setSymbolResolver(std::unique_ptr<RuntimeDyld::SymbolResolver> SR);
Clients should use EITHER:
A single call to setMCJITMemoryManager with an RTDyldMemoryManager.
OR (exclusive)
One call each to each of setMemoryManager and setSymbolResolver.
This patch should be fully compatible with existing uses of RTDyldMemoryManager.
If it is not it should be considered a bug, and the patch either fixed or
reverted.
If clients find the new API to be an improvement the goal will be to deprecate
and eventually remove the RTDyldMemoryManager class in favor of the new classes.
llvm-svn: 233509
This ensures that we're building and testing the CompileOnDemand layer, at least
in a basic way.
Currently x86-64 only, and with limited to no library calls enabled (depending
on host platform). Patches welcome. ;)
To enable access to the lazy JIT, this patch replaces the '-use-orcmcjit' lli
option with a new option:
'-jit-kind={ mcjit | orc-mcjit | orc-lazy }'.
All regression tests are updated to use the new option, and one trivial test of
the new lazy JIT is added.
llvm-svn: 233182
The MSVC linker won't produce a .lib file for an executable that doesn't
export anything, and LLVM doesn't maintain dllexport annotations or .def
files listing all C++ symbols. It also doesn't support exporting all
symbols, like binutils ld.
CMake 3.2 changed the Ninja generator to list both the .exe and .lib
files as outputs of executable build targets. Ninja would always re-link
executables with ENABLE_EXPORTS because the .lib output file was not
present, and therefore the target was out of date.
llvm-svn: 232662
In preparation for adding PDB support to LLVM, this moves the
DWARF parsing code to its own subdirectory under DebugInfo, and
renames LLVMDebugInfo to LLVMDebugInfoDWARF.
This is purely a mechanical / build system change.
Differential Revision: http://reviews.llvm.org/D7269
Reviewed by: Eric Christopher
llvm-svn: 227586
This patch adds a new set of JIT APIs to LLVM. The aim of these new APIs is to
cleanly support a wider range of JIT use cases in LLVM, and encourage the
development and contribution of re-usable infrastructure for LLVM JIT use-cases.
These APIs are intended to live alongside the MCJIT APIs, and should not affect
existing clients.
Included in this patch:
1) New headers in include/llvm/ExecutionEngine/Orc that provide a set of
components for building JIT infrastructure.
Implementation code for these headers lives in lib/ExecutionEngine/Orc.
2) A prototype re-implementation of MCJIT (OrcMCJITReplacement) built out of the
new components.
3) Minor changes to RTDyldMemoryManager needed to support the new components.
These changes should not impact existing clients.
4) A new flag for lli, -use-orcmcjit, which will cause lli to use the
OrcMCJITReplacement class as its underlying execution engine, rather than
MCJIT itself.
Tests to follow shortly.
Special thanks to Michael Ilseman, Pete Cooper, David Blaikie, Eric Christopher,
Justin Bogner, and Jim Grosbach for extensive feedback and discussion.
llvm-svn: 226940
Summary:
The default copy and assignment operators for these objects probably don't actually do what the clients intend, so they should be deleted.
Places using the assignment operator to set the value of an option should cast to the option's data type first to call into the override for operator=. Places using the copy constructor just need to be changed to not copy (i.e. passing by const reference instead of value).
Reviewers: dexonsmith, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7114
llvm-svn: 226762
In release builds this is actually possible as without asserts there is
no testing of the actual read bytes and the variables could be partially
uninitialized.
llvm-svn: 224114
Previously, when loading an object file, RuntimeDyld (1) took ownership of the
ObjectFile instance (and associated MemoryBuffer), (2) potentially modified the
object in-place, and (3) returned an ObjectImage that managed ownership of the
now-modified object and provided some convenience methods. This scheme accreted
over several years as features were tacked on to RuntimeDyld, and was both
unintuitive and unsafe (See e.g. http://llvm.org/PR20722).
This patch fixes the issue by removing all ownership and in-place modification
of object files from RuntimeDyld. Existing behavior, including debugger
registration, is preserved.
Noteworthy changes include:
(1) ObjectFile instances are now passed to RuntimeDyld by const-ref.
(2) The ObjectImage and ObjectBuffer classes have been removed entirely, they
existed to model ownership within RuntimeDyld, and so are no longer needed.
(3) RuntimeDyld::loadObject now returns an instance of a new class,
RuntimeDyld::LoadedObjectInfo, which can be used to construct a modified
object suitable for registration with the debugger, following the existing
debugger registration scheme.
(4) The JITRegistrar class has been removed, and the GDBRegistrar class has been
re-written as a JITEventListener.
This should fix http://llvm.org/PR20722 .
llvm-svn: 222810
