The legacy pass name is "loop-fusion".
Fixes most tests under Transforms/LoopFusion under NPM.
Reviewed By: Whitney
Differential Revision: https://reviews.llvm.org/D83066
The legacy pass was called "loop-reduce".
This lowers the number of check-llvm failures under NPM by 83.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D82925
Summary:
Old PM runs SpeculativeExecutionPass for targets that have divergent branches.
It uses `createSpeculativeExecutionIfHasBranchDivergencePass` that creates
the pass with `OnlyIfDivergentTarget=true`, whereas new PM just created the
pass with default `OnlyIfDivergentTarget=fase` so it unexpectedly runs and
causes buildbot test fails.
Reviewers: chandlerc, arsenm
Reviewed By: arsenm
Subscribers: wdng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82735
Is teaching the LoopFullUnrollPass to preserve MemorySSA very hard or
just impossible?
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D82618
The legacy pass is called "loop-unroll", but in the new PM it's called "unroll".
Also applied to unroll-and-jam and unroll-full.
Fixes various check-llvm tests when NPM is turned on.
Reviewed By: Whitney, dmgreen
Differential Revision: https://reviews.llvm.org/D82590
Summary:
This somewhat matches the --aa-pipeline option, which separates out any
AA analyses to make sure they run before other passes.
Makes check-llvm failures under new PM go from 2356 -> 2303.
AA passes are not handled by PassBuilder::parsePassPipeline() but rather
PassBuilder::parseAAPipeline(), which is why this fixes some failures.
Reviewers: asbirlea, hans, ychen, leonardchan
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82488
The dependency was introduced in
5134020ea62d1e1e125fdac48d251a26b80e9781. The only functional change
from this removal would be the new PM interface for the two codegen
passes. This is not necessary since we don't have codegen pipeline using
new PM yet. This removal is to break the potential circular dependency between
Passes and CodeGen once the codegen begins to gain new PM support.
This class allows to see the inliner's decisions for better
optimization verifications and tests. To use, use flag
"-passes="print<inline-cost>"".
This is the second attempt to integrate the patch.
The problem from the first try has been discussed and
fixed in D82205.
Reviewers: apilipenko, mtrofin, davidxl, fedor.sergeev
Reviewed By: mtrofin
Differential revision: https://reviews.llvm.org/D81743
Summary:
Seems to just be missing from PassRegistry.def.
Makes the number of check-llvm failures under new PM go from 2619 to 2581.
Reviewers: hans, ychen, asbirlea, leonardchan
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82422
Summary:
-simplifycfg is the legacy pass name for SimplifyCFGPass.
There is already -simplify-cfg in FUNCTION_PASS_WITH_PARAMS which
handles options for SimplifyCFGPass. Maybe that should be renamed to
-simplifycfg as well?
This reduces the number of check-llvm failures under NewPM from 2619 to 2392.
Reviewers: hans, leonardchan, asbirlea, ychen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82421
Summary:
Extend StackLifetime with option to calculate liveliness
where alloca is only considered alive on basic block entry
if all non-dead predecessors had it alive at terminators.
Depends on D82043.
Reviewers: eugenis
Reviewed By: eugenis
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82124
This class allows to see the inliner's decisions for better
optimization verifications and tests. To use, use flag
"-passes="print<inline-cost>"".
Reviewers: apilipenko, mtrofin, davidxl, fedor.sergeev
Reviewed By: mtrofin
Differential revision: https://reviews.llvm.org/D81743
The initial intent was to organize ML stuff in its own directory, but
it turns out that conflicts with llvm component layering policies: it
is not a component, because subsequent changes want to rely on other
analyses, which would create a cycle; and we don't have a reliable,
cross-platform mechanism to compile files in a subdirectory, and fit in
the existing LLVM build structure.
This change moves the files into Analysis, and subsequent changes will
leverage conditional compilation for those that have optional
dependencies.
Summary:
Currently, add_llvm_library would create an OBJECT library alongside
of a STATIC / SHARED library, but losing the link interface (its
elements would become dependencies instead). To support scenarios
where linking an object library also brings in its usage
requirements, this patch adds support for 'stand-alone' OBJECT
libraries - i.e. without an accompanying SHARED/STATIC library, and
maintaining the link interface defined by the user.
The support is via a new option, OBJECT_ONLY, to avoid breaking changes
- since just specifying "OBJECT" would currently imply also STATIC or
SHARED, depending on BUILD_SHARED_LIBS.
This is useful for cases where, for example, we want to build a part
of a component separately. Using a STATIC target would incur the risk
that symbols not referenced in the consumer would be dropped (which may
be undesirable).
The current application is the ML part of Analysis. It should be part
of the Analysis component, so it may reference other analyses; and (in
upcoming changes) it has dependencies on optional libraries.
Reviewers: karies, davidxl
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81447
Summary:
Experiments show that inline deferral past pre-inlining slightly
pessimizes the performance.
This patch introduces an option to control inline deferral during PGO.
The option defaults to true for now (that is, NFC).
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: eraman, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80776
This lets us to remove !stack-safe metadata and
better controll when to perform StackSafety
analysis.
Reviewers: eugenis
Subscribers: hiraditya, steven_wu, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80771
Last we looked at this and couldn't come up with a reason to change
it, but with a pragma for full loop unrolling we bypass every other
loop unroll and then fail to fully unroll a loop when the pragma is set.
Move the OnlyWhenForced out of the check and into the initialization
of the full unroll pass in the new pass manager. This doesn't show up
with the old pass manager.
Add a new option to opt so that we can turn off loop unrolling
manually since this is a difference between clang and opt.
Tested with check-clang and check-llvm.
Summary:
This was attempted once before in https://reviews.llvm.org/D79698, but
was reverted due to the coverage pass running in the wrong part of the
pipeline. This commit puts it in the same place as the other sanitizers.
This changes PassBuilder.OptimizerLastEPCallbacks to work on a
ModulePassManager instead of a FunctionPassManager. That is because
SanitizerCoverage cannot (easily) be split into a module pass and a
function pass like some of the other sanitizers since in its current
implementation it conditionally inserts module constructors based on
whether or not it successfully modified functions.
This fixes compiler-rt/test/msan/coverage-levels.cpp under the new pass
manager (last check-msan test).
Currently sanitizers + LTO don't work together under the new pass
manager, so I removed tests that checked that this combination works for
sancov.
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80692
Summary:
This was attempted once before in https://reviews.llvm.org/D79698, but
was reverted due to the coverage pass running in the wrong part of the
pipeline. This commit puts it in the same place as the other sanitizers.
This changes PassBuilder.OptimizerLastEPCallbacks to work on a
ModulePassManager instead of a FunctionPassManager. That is because
SanitizerCoverage cannot (easily) be split into a module pass and a
function pass like some of the other sanitizers since in its current
implementation it conditionally inserts module constructors based on
whether or not it successfully modified functions.
This fixes compiler-rt/test/msan/coverage-levels.cpp under the new pass
manager (last check-msan test).
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80692
EarlyCSE was added with D75145, but the motivating test is
not regressed by removing the extra pass now. That might be
because VectorCombine altered the way it processes instructions,
or it might be from (re)moving VectorCombine in the pipeline.
The extra round of EarlyCSE appears to cost approximately
0.26% in compile-time as discussed in D80236, so we need some
evidence to justify its inclusion here, but we do not have
that (yet).
I suspect that between SLP and VectorCombine, we are creating
patterns that InstCombine and/or codegen are not prepared for,
but we will need to reduce those examples and include them as
PhaseOrdering and/or test-suite benchmarks.
There are 2 known problem patterns shown in the test diffs here:
vector horizontal ops (an x86 specialization) and vector reductions.
SLP has greater ability to match and fold those than vector-combine,
so let SLP have first chance at that.
This is a quick fix while we continue to improve vector-combine and
possibly canonicalize to reduction intrinsics.
In the longer term, we should improve matching of these patterns
because if they were created in the "bad" forms shown here, then we
would miss optimizing them.
I'm not sure what is happening with alias analysis on the addsub test.
The old pass manager now shows an extra line for that, and we see an
improvement that comes from SLP vectorizing a store. I don't know
what's missing with the new pass manager to make that happen.
Strangely, I can't reproduce the behavior if I compile from C++ with
clang and invoke the new PM with "-fexperimental-new-pass-manager".
Differential Revision: https://reviews.llvm.org/D80236
Summary:
If an induction variable is frozen and used, SCEV yields imprecise result
because it doesn't say anything about frozen variables.
Due to this reason, performance degradation happened after
https://reviews.llvm.org/D76483 is merged, causing
SCEV yield imprecise result and preventing LSR to optimize a loop.
The suggested solution here is to add a pass which canonicalizes frozen variables
inside a loop. To be specific, it pushes freezes out of the loop by freezing
the initial value and step values instead & dropping nsw/nuw flags from instructions used by freeze.
This solution was also mentioned at https://reviews.llvm.org/D70623 .
Reviewers: spatel, efriedma, lebedev.ri, fhahn, jdoerfert
Reviewed By: fhahn
Subscribers: nikic, mgorny, hiraditya, javed.absar, llvm-commits, sanwou01, nlopes
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77523
Summary:
This change introduces InliningAdvisor (and related APIs), the interface
that abstracts decision making away from the inlining pass. We will use
this interface to delegate decision making to a trained ML model,
subsequently (see referenced RFC).
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-April/140763.html
Reviewers: davidxl, eraman, dblaikie
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79042
Summary:
As commented in the code, ProfileSummaryAnalysis is required for inliner
pass to query, so this patch moved
RequireAnalysisPass<ProfileSummaryAnalysis> in the recently created
buildInlinerPipeline.
Reviewer: mtrofin, davidxl, tejohnson, dblaikie, jdoerfert, sstefan1
Reviewed By: mtrofin, davidxl, jdoerfert
Subscribers: hiraditya, steven_wu, dexonsmith, wuzish, llvm-commits,
jsji
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D79696
don't span their entire scope.
The previous commit (6d1c40c171e) is an older version of the test.
Reviewed By: aprantl, vsk
Differential Revision: https://reviews.llvm.org/D79573
Summary:
This simplifies testing in scenarios where we want to set up module-wide
analyses for inlining. The patch enables treating inlining and its
function cleanups, as a module pass. The alternative would be for tests
to describe the pipeline, which is tedious and adds maintenance
overhead.
Reviewers: davidxl, dblaikie, jdoerfert, sstefan1
Subscribers: hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78512
The old command line option `-attributor-disable` was too coarse grained
as we want to measure the effects of the module or cgscc pass without
the other as well.
Since `none` is the default there is no real functional change.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D78571
Summary:
Currently, the internal options -vectorize-loops, -vectorize-slp, and
-interleave-loops do not have much practical effect. This is because
they are used to initialize the corresponding flags in the pass
managers, and those flags are then unconditionally overwritten when
compiling via clang or via LTO from the linkers. The only exception was
-vectorize-loops via opt because of some special hackery there.
While vectorization could still be disabled when compiling via clang,
using -fno-[slp-]vectorize, this meant that there was no way to disable
it when compiling in LTO mode via the linkers. This only affected
ThinLTO, since for regular LTO vectorization is done during the compile
step for scalability reasons. For ThinLTO it is invoked in the LTO
backends. See also the discussion on PR45434.
This patch makes it so the internal options can actually be used to
disable these optimizations. Ultimately, the best long term solution is
to mark the loops with metadata (similar to the approach used to fix
-fno-unroll-loops in D77058), but this enables a shorter term
workaround, and actually makes these internal options useful.
I constant propagated the initial values of these internal flags into
the pass manager flags (for some reasons vectorize-loops and
interleave-loops were initialized to true, while vectorize-slp was
initialized to false). As mentioned above, they are overwritten
unconditionally so this doesn't have any real impact, and these initial
values aren't particularly meaningful.
I then changed the passes to check the internl values and return without
performing the associated optimization when false (I changed the default
of -vectorize-slp to true so the options behave similarly). I was able
to remove the hackery in opt used to get -vectorize-loops=false to work,
as well as a special option there used to disable SLP vectorization.
Finally, I changed thinlto-slp-vectorize-pm.c to:
a) Only test SLP (moved the loop vectorization checking to a new test).
b) Use code that is slp vectorized when it is enabled, and check that
instead of whether the pass is enabled.
c) Test the new behavior of -vectorize-slp.
d) Test both pass managers.
The loop vectorization (and associated interleaving) testing I moved to
a new thinlto-loop-vectorize-pm.c test, with several changes:
a) Changed the flags on the interleaving testing so that it will
actually interleave, and check that.
b) Test the new behavior of -vectorize-loops and -interleave-loops.
c) Test both pass managers.
Reviewers: fhahn, wmi
Subscribers: hiraditya, steven_wu, dexonsmith, cfe-commits, davezarzycki, llvm-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77989
ModuleSummaryAnalysis is the only file in libAnalysis that brings a
dependency on the CodeGen layer from libAnalysis, moving it breaks this
dependency.
Differential Revision: https://reviews.llvm.org/D77994
This pass is created in d6de5f12d485a85504bc99d384a85634574a27e2 and tested
for new and legacy pass manager but never added to new pass manager pipeline.
I am adding it to new pass manager pipeline.
This pass is get used in Vector Function Database (VFDatabase) and without
this pass in new pass manager pipeline, none of the vector libraries are work
ing with new pass manager.
Related passes:
66c120f02560ef528a60924104ead66f330190f1
https://reviews.llvm.org/D74944
Differential revision: https://reviews.llvm.org/D75354
The new and old pass managers (PassManagerBuilder.cpp and
PassBuilder.cpp) are exposed to an `extern` declaration of
`attributor-disable` option which will guard the addition of the
attributor passes to the pass pipelines.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D76871
Summary:
Splitting Knowledge retention into Queries in Analysis and Builder into Transform/Utils
allows Queries and Transform/Utils to use Analysis.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77171
Summary:
CGProfilePass is run by default in certain new pass manager optimization pipeline. Assemblers other than llvm as (such as gnu as) cannot recognize the .cgprofile entries generated and emitted from this pass, causing build time error.
This patch adds new options in clang CodeGenOpts and PassBuilder options so that we can turn cgprofile off when not using integrated assembler.
Reviewers: Bigcheese, xur, george.burgess.iv, chandlerc, manojgupta
Reviewed By: manojgupta
Subscribers: manojgupta, void, hiraditya, dexonsmith, llvm-commits, tcwang, llozano
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D62627
Summary:
Run StackSafetyAnalysis at the end of the IR pipeline and annotate
proven safe allocas with !stack-safe metadata. Do not instrument such
allocas in the AArch64StackTagging pass.
Reviewers: pcc, vitalybuka, ostannard
Reviewed By: vitalybuka
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, gilang, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73513
Summary:
Assume bundles need to be usable by Analysis and Transforms/Utils isn't.
so this commit moves utilities to deal with asusme bundles to IR.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75618
The initial placement of vector-combine in the opt pipeline revealed phase ordering bugs:
https://bugs.llvm.org/show_bug.cgi?id=45015https://bugs.llvm.org/show_bug.cgi?id=42022
This patch contains a few independent changes:
1. Move the pass up in the pipeline, so it happens just after loop-vectorization.
This is only to keep vectorization passes together in the pipeline at the moment.
I don't have evidence of interaction between these yet.
2. Add an -early-cse pass after -vector-combine to clean up redundant ops. This was
partly proposed as far back as rL219644 (which is why it's effectively being moved
in the old PM code). This is important because the subsequent -instcombine doesn't
work as well without EarlyCSE. With the CSE, -instcombine is able to squash
shuffles together in 1 of the tests (because those are simple "select" shuffles).
3. Remove the -vector-combine pass that was running after SLP. We may want to do that
eventually, but I don't have a test case to support it yet.
Differential Revision: https://reviews.llvm.org/D75145
