By creating a dummy of this target in LLVMConfig.cmake, projects that can build against out-of-tree LLVM can freely depend on the target without needing to have conditionals for if LLVM is in-tree or out-of-tree.
llvm-svn: 309389
LLVM defines `PTHREAD_LIB` which is used by AddLLVM.cmake and various projects
to correctly link the threading library when needed. Unfortunately
`PTHREAD_LIB` is defined by LLVM's `config-ix.cmake` file which isn't installed
and therefore can't be used when configuring out-of-tree builds. This causes
such builds to fail since `pthread` isn't being correctly linked.
This patch attempts to fix that problem by renaming and exporting
`LLVM_PTHREAD_LIB` as part of`LLVMConfig.cmake`. I renamed `PTHREAD_LIB`
because It seemed likely to cause collisions with downstream users of
`LLVMConfig.cmake`.
llvm-svn: 294690
Add an explicit LLVM_ENABLE_DIA_SDK option to control building support
for DIA SDK-based debugging. Control its value to match whether DIA SDK
support was found and expose it in LLVMConfig (alike LLVM_ENABLE_ZLIB).
Its value is needed for LLDB to determine whether to run tests requiring
DIA support. Currently it is obtained from llvm/Config/config.h;
however, this file is not available for standalone builds. Following
this change, LLDB will be modified to use the value from LLVMConfig.
Differential Revision: https://reviews.llvm.org/D26255
llvm-svn: 290818
Previously, gtest/gtest_main were not exported via cmake. The intention here was
to ensure that users whom are linking against the LLVM install tree would not
get the gtest/gtest_main targets. This prevents downstream projects that link
against the LLVM build tree (i.e. Swift) from getting this dependency
information in their cmake builds. Without such dependency information, linker
issues can result on linux due to LLVMSupport being put before gtest on the
linker command line.
This commit preserves behavior that we want for the install tree, while adding
support for the build tree by:
1. The special casing for gtest/gtest_main in the add_llvm_library code is
removed in favor of a flag called "BUILDTREE_ONLY". If this is set, then the
library is communicating that it is only meant to be exported into the build
tree and is not meant to be installed or exported via the install tree. This
part is just a tweak to remove the special case, the underlying code is the
same.
2. The cmake code that exports cmake targets for the build tree has special code
to import an additional targets file called
LLVMBuildTreeOnlyExports.cmake. Additionally the extra targets are added to the
LLVMConfig.cmake's LLVM_EXPORTED_TARGETS variable. In contrast, the
"installation" cmake file uses the normal LLVM_EXPORTS_TARGETS as before and
does not include the extra exports file. This is implemented by
defining/undefining variables when performing a configure of the build/install
tree LLVMConfig.cmake files.
llvm-svn: 281085
This is a partial revert of r280013. Brad King pointed out these variable names are matching CMake conventions, so we should preserve them.
I've also added a direct mapping of the LLVM_*_DIR variables which we need to make projects support building in and out of tree.
llvm-svn: 280380
With the runtimes build we're trying to use LLVMConfig.cmake as a way of providing LLVM_* variables that are needed to behave as if the project is building in tree. To make this work we need to rename two variables by dropping the "S" from the end. This makes the variables match the in-tree names.
This renames:
LLVM_INCLUDE_DIRS -> LLVM_INCLUDE_DIR
LLVM_LIBRARY_DIRS -> LLVM_LIBRARY_DIR
The versions ending in S are not used in-tree anywhere. This also cleans up LLVM_LIBRARY_DIR being set to the same value with and without the "S".
llvm-svn: 280013
Previously out-of-tree passes could detect if LLVM was built with
LLVM_BUILD_32_BITS by looking for -m32 in LLVM_DEFINITIONS, but as of r271871
it no longer appears there. Resolve this by instead emitting LLVM_BUILD_32_BITS
in LLVMConfig so it can be checked for directly.
Differential Revision: http://reviews.llvm.org/D21434
llvm-svn: 274351
This is just a small step in the direction of making LLVMConfig.cmake a complete
replacement for llvm-config.
For those unfamiliar, llvm-config --build-mode prints out CMAKE_BUILD_TYPE. Thus
as one can imagine, LLVM_BUILD_TYPE is @CMAKE_BUILD_TYPE@.
llvm-svn: 273782
LLVMConfig.cmake needs to set LLVM_BINARY_DIR differently based on whether or not it is the build directory or the install directory. The build directory just needs to set the value from the configuration, the install directory needs to set it to the install prefix.
llvm-svn: 273479
This is the more-correct fix to out-of-tree building. AddLLVM.cmake relies on this variable being set, so we should make sure it is set in LLVMConfig.cmake.
llvm-svn: 272279
The problem with plugins on Windows is that when building a plugin DLL it needs
to explicitly link against something (an exe or DLL) if it uses symbols from
that thing, and that thing must explicitly export those symbols. Also there's a
limit of 65535 symbols that can be exported. This means that currently plugins
only work on Windows when using BUILD_SHARED_LIBS, and that doesn't work with
MSVC.
This patch adds an LLVM_EXPORT_SYMBOLS_FOR_PLUGINS option, which when enabled
automatically exports from all LLVM tools the symbols that a plugin could want
to use so that a plugin can link against a tool directly. Plugins can specify
what tool they link against by using PLUGIN_TOOL argument to llvm_add_library.
The option can also be enabled on Linux, though there all it should do is
restrict the set of symbols that are exported as by default all symbols are
exported.
This option is currently OFF by default, as while I've verified that it works
with MSVC, linux gcc, and cygwin gcc, I haven't tried mingw gcc and I have no
idea what will happen on OSX. Also unfortunately we can't turn on
LLVM_ENABLE_PLUGINS when the option is ON as bugpoint-passes needs to be
loaded by both bugpoint.exe and opt.exe which is incompatible with this
approach. Also currently clang plugins don't work with this approach, which
will be fixed in future patches.
Differential Revision: http://reviews.llvm.org/D18826
llvm-svn: 270839
Compiler-RT needs LLVM_LIBRARY_DIR, LLVM_BINARY_DIR.
Setting these in LLVMConfig.cmake will allow Compiler-RT to not need to run llvm-config as long as the LLVMConfig.cmake module is in the CMake module path.
llvm-svn: 269104
When using LLVMConfig.cmake from an installed toolchain in order to build a
loadable pass using add_llvm_loadable_module LLVM_ENABLE_PLUGINS and
LLVM_PLUGIN_EXT must be set. Also make LLVM_DEFINITIONS be set to what it
actually is.
Differential Revision: http://reviews.llvm.org/D13214
llvm-svn: 248884
that is used by other projects to build against LLVM. This will allow
subsequent patches to them to use LLVM_LIBDIR_SUFFIX, both when built as
part of the larger LLVM build an as part of a standalone build against
an installed set of LLVM libraries.
llvm-svn: 224920
The LLVMSupport library implementation consolidates all dependencies on
system libraries. Move the logic gathering system libraries out of
'cmake/modules/LLVM-Config.cmake' and into 'lib/Support/CMakeLists.txt'.
Use the target_link_libraries() command there to tell CMake about the
link dependencies of the LLVMSupport implementation. CMake will
automatically propagate this to all targets that link LLVMSupport
directly or indirectly.
We still need to build knowledge of system library dependencies into
'llvm-config'. Store the list of libraries needed in a property on
LLVMSupport and teach 'tools/llvm-config/CMakeLists.txt' to retrieve it
from there.
Drop all calls to 'link_system_libs' and 'get_system_libs' from our
CMake code. Replace their implementations with a warning that explains
the calls are no longer necessary. Also drop from 'LLVMConfig.cmake'
the HAVE_* and related variables that were published there only to allow
'get_system_libs' to run outside our build process.
Contributed by Brad King.
llvm-svn: 201969
The module still needs to collect the list of all available libraries
in order to satisfy the 'all' component. Provide this in the package
configuration file, 'LLVMConfig.cmake', as a LLVM_AVAILABLE_LIBS
variable. (A variable is scoped better than a global property.)
Since this won't be set for our own build, fall back to looking up the
LLVM_LIBS property to get the value when it is not set.
Contributed by Brad King.
llvm-svn: 201853
Teach each package configuration file to load the LLVMExports file for
its corresponding tree. This will allow application CMake code to use
logical library and executable target names from LLVM as if they were in
our own build process (e.g. LLVMSupport). CMake will have enough
information to propagate LLVM library link dependencies automatically
while configuring applications.
Contributed by Brad King.
llvm-svn: 201051
Create separate package configuration files "LLVMConfig.cmake" for the
LLVM build and install trees so that each can have information specific
to its tree. Configure each with the corresponding include, lib, and
cmake directories. Include the "LLVM-Config" API modules directly from
the configured cmake modules directory.
In the install tree, compute the installation prefix relative to the
file location. In the build tree, provide information specific to the
build tree for use by tools like Clang that can build externally against
the LLVM build tree. Prefix such values in "LLVM_BUILD_" and comment
them as such.
Contributed by Brad King.
llvm-svn: 201048
Do not modify this value on the application's behalf and just ensure API
modules are always available next to the LLVMConfig module. This is
already the case in the install tree so use file(COPY) to make it so in
the build tree. Include the LLVM-Config API module from next to the
LLVMConfig location.
Contributed by Brad King.
llvm-svn: 201047
library for color support detection. This still will use a curses
library if that is all we have available on the system. This change
tries to use a smaller subset of the curses library, specifically the
subset that is on some systems split off into a separate library. For
example, if you install ncurses configured --with-tinfo, a 'libtinfo' is
install that provides just the terminfo querying functionality. That
library is now used instead of curses when it is available.
This happens to fix a build error on systems with that library because
when we tried to link ncurses into the binary, we didn't pull tinfo in
as well. =]
It should also provide an easy path for supporting the NetBSD
libterminfo library, but as I don't have access to a NetBSD system I'm
leaving adding that support to those folks.
llvm-svn: 188160
using it to detect whether or not a terminal supports colors. This
replaces a particularly egregious hack that merely compared the TERM
environment variable to "dumb". That doesn't really translate to
a reasonable experience for users that have actually ensured their
terminal's capabilities are accurately reflected.
This makes testing a terminal for color support somewhat more expensive,
but it is called very rarely anyways. The important fast path when the
output is being piped somewhere is already in place.
The global lock may seem excessive, but the spec for calling into curses
is *terrible*. The whole library is terrible, and I spent quite a bit of
time looking for a better way of doing this before convincing myself
that this was the fundamentally correct way to behave. The damage of the
curses library is very narrowly confined, and we continue to use raw
escape codes for actually manipulating the colors which is a much sane
system than directly using curses here (IMO).
If this causes trouble for folks, please let me know. I've tested it on
Linux and will watch the bots carefully. I've also worked to account for
the variances of curses interfaces that I could finde documentation for,
but that may not have been sufficient.
llvm-svn: 187874
This is useful for clients that want to maintain compatibility
across multiple releases of LLVM. Currently users like Klee and
Mesa all have to roll their own 'parse llvm-config --version
output and generate defines' solution.
Also reuse the new macros so that version information is less
redundant/likely to fall out of sync again in the future.
llvm-svn: 150405
globally scoped constructs. Also, round-trip these dependencies through
the LLVMConfig.cmake.in file thata is used by CMake-based clients of
"installed" (or built) LLVM trees.
llvm-svn: 136543
component names such as "engine" do not expand to "jit" and hence to
the native target libraries for external users.
Thanks to arrowdodger for reporting and diagnosing the problem.
llvm-svn: 129444
