This adds all the feature bits libgcc has. They will soon be added to compiler-rt as well. This adds a second 32 bit feature variable to hold the bits that are needed by getHostCPUName that are not in libgcc. libgcc had already used 31 of the 32 bits in the existing variable and we needed 3 bits so at minimum 2 bits would spill over. I chose to move all 3.
llvm-svn: 307758
Summary:
A space was added between '-' and 'help' when emitting help output.
See https://reviews.llvm.org/D22621 for details.
Reviewers: MaggieYi, vsk
Reviewed By: vsk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35283
llvm-svn: 307745
Summary:
Patch by Klaus Kretzschmar
We would like to introduce a new type of llvm error handler for handling
bad alloc fault situations. LLVM already provides a fatal error handler
for serious non-recoverable error situations which by default writes
some error information to stderr and calls exit(1) at the end (functions
are marked as 'noreturn').
For long running processes (e.g. a server application), exiting the
process is not an acceptable option, especially not when the system is
in a temporary resource bottleneck with a good chance to recover from
this fault situation. In such a situation you would rather throw an
exception to stop the current compilation and try to overcome the
resource bottleneck. The user should be aware of the problem of throwing
an exception in bad alloc situations, e.g. you must not do any
allocations in the unwind chain. This is especially true when adding
exceptions in existing unfamiliar code (as already stated in the comment
of the current fatal error handler)
So the new handler can also be used to distinguish from general fatal
error situations where recovering is no option. It should be used in
cases where a clean unwind after the allocation is guaranteed.
This patch contains:
- A report_bad_alloc function which calls a user defined bad alloc
error handler. If no user handler is registered the
report_fatal_error function is called. This function is not marked as
'noreturn'.
- A install/restore_bad_alloc_error_handler to install/restore the bad
alloc handler.
- An example (in Mutex.cpp) where the report_bad_alloc function is
called in case of a malloc returns a nullptr.
If this patch gets accepted we would create similar patches to fix
corresponding malloc/calloc usages in the llvm code.
Reviewers: chandlerc, greened, baldrick, rnk
Reviewed By: rnk
Subscribers: llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D34753
llvm-svn: 307673
These asserts could only occur if we fail to properly detect the compiler, but an assert is not a good way to do that because it doesn't work in release builds.
I wonder if we could use #error?
llvm-svn: 307520
Users of getHostCPUName should also use getHostCPUFeatures which will take care of making sure avx512 is disabled if the CPU doesn't support it. This is consistent with what we do for other CPUs.
llvm-svn: 307495
Summary:
(re)definition of _RESTRICT_KYWD rightfully causes a warning message during the Solaris build.
This hack is not needed if build compiler is properly configured (.e.g /usr/bin/gcc) so just remove it.
Reviewers: ro, mgorny, krytarowski, joerg
Reviewed By: joerg
Subscribers: quenelle, llvm-commits
Patch by Fedor Sergeev (Oracle).
Differential Revision: https://reviews.llvm.org/D35054
llvm-svn: 307469
The CPU name is really just used for scheduler and other microarchitectural optimizations. The feature flags should be determined by getHostCPUFeatures which should always be used with getHostCPUName. Trying to alter CPU name strings to control features just isn't practical.
Most of these types of things were removed from Intel CPUs a while ago.
This is part of my plan to bring compiler-rt's cpu_model.c file up to date with the equivalent functionality in libgcc. A lot of the code in that file is copied from Host.cpp and we want to keep them reasonably in sync.
llvm-svn: 307467
the system's version of macOS
sys::getProcessTriple returns LLVM_HOST_TRIPLE, whose system version might not
be the actual version of the system on which the compiler running. This commit
ensures that, for macOS, sys::getProcessTriple returns a triple with the
system's macOS version.
rdar://33177551
Differential Revision: https://reviews.llvm.org/D34446
llvm-svn: 307372
This is a short-term fix for PR33650 aimed to get the modules build bots green again.
Remove all the places where we use the LLVM_YAML_IS_(FLOW_)?SEQUENCE_VECTOR
macros to try to locally specialize a global template for a global type. That's
not how C++ works.
Instead, we now centrally define how to format vectors of fundamental types and
of string (std::string and StringRef). We use flow formatting for the former
cases, since that's the obvious right thing to do; in the latter case, it's
less clear what the right choice is, but flow formatting is really bad for some
cases (due to very long strings), so we pick block formatting. (Many of the
cases that were using flow formatting for strings are improved by this change.)
Other than the flow -> block formatting change for some vectors of strings,
this should result in no functionality change.
Differential Revision: https://reviews.llvm.org/D34907
Corresponding updates to clang, clang-tools-extra, and lld to follow.
llvm-svn: 306878
The difference from the previous version is the use of decltype, as the
implementation of std::result_of in libc++ did not work correctly for
variadic function like open(2).
Original summary:
This function retries an operation if it was interrupted by a signal
(failed with EINTR). It's inspired by the TEMP_FAILURE_RETRY macro in
glibc, but I've turned that into a template function. I've also added a
fail-value argument, to enable the function to be used with e.g.
fopen(3), which is documented to fail for any reason that open(2) can
fail (which includes EINTR).
The main user of this function will be lldb, but there were also a
couple of uses within llvm that I could simplify using this function.
Reviewers: zturner, silvas, joerg
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D33895
llvm-svn: 306671
Ananas is a home-brew operating system, mainly for amd64 machines. After
using GCC for quite some time, it has switched to clang and never looked
back - yet, having to manually patch things is annoying, so it'd be much
nicer if this was in the official tree.
More information:
https://github.com/zhmu/ananas/https://rink.nu/projects/ananas.html
Submitted by: Rink Springer
Differential Revision: https://reviews.llvm.org/D32937
llvm-svn: 306237
This is useful when an upper limit on the cache size needs to be
controlled independently of the amount of the amount of free space.
One use case is a machine with a large number of cache directories
(e.g. a buildbot slave hosting a large number of independent build
jobs). By imposing an upper size limit on each cache directory,
users can more easily estimate the server's capacity.
Differential Revision: https://reviews.llvm.org/D34547
llvm-svn: 306126
This is essentially just a BinaryStreamRef packaged with an
offset and the logic for reading one is no different than the
logic for reading a BinaryStreamRef, except that we save the
current offset.
llvm-svn: 306122
Summary:
The function matches the interface of llvm::to_integer, but as we are
calling out to a C library function, I let it take a Twine argument, so
we can avoid a string copy at least in some cases.
I add a test and replace a couple of existing uses of strtod with this
function.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34518
llvm-svn: 306096
The fix in r306003 uncovered a pretty fundamental problem that libc++
implementation of std::result_of does not handle the prototype of
open(2) correctly (presumably because it contains ...). This makes the
whole function unusable in its current form, so I am also reverting the
original commit (r305892), which introduced the function, at least until
I figure out a way to solve the libc++ issue.
llvm-svn: 306005
Summary:
This function retries an operation if it was interrupted by a signal
(failed with EINTR). It's inspired by the TEMP_FAILURE_RETRY macro in
glibc, but I've turned that into a template function. I've also added a
fail-value argument, to enable the function to be used with e.g.
fopen(3), which is documented to fail for any reason that open(2) can
fail (which includes EINTR).
The main user of this function will be lldb, but there were also a
couple of uses within llvm that I could simplify using this function.
Reviewers: zturner, silvas, joerg
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D33895
llvm-svn: 305892
This is a workaround for large file writes. It has been witnessed that
write(2) failing with EINVAL (22) due to a large value (>2G). Thanks to
James Knight for the help with coming up with a sane test case.
llvm-svn: 305846
No behavior is changed if LLVM_TARGET_TRIPLE_ENV is blank or undefined.
If LLVM_TARGET_TRIPLE_ENV is "TEST_TARGET_TRIPLE" and $TEST_TARGET_TRIPLE is not blank,
llvm::sys::getDefaultTargetTriple() returns $TEST_TARGET_TRIPLE.
Lit resets config.target_triple and config.environment[LLVM_TARGET_TRIPLE_ENV] to change the default target.
Without changing LLVM_DEFAULT_TARGET_TRIPLE nor rebuilding, lit can be run;
TEST_TARGET_TRIPLE=i686-pc-win32 bin/llvm-lit -sv path/to/test/
TEST_TARGET_TRIPLE=i686-pc-win32 ninja check-clang-tools
Differential Revision: https://reviews.llvm.org/D33662
llvm-svn: 305632
This patch should fix sanitizer-x86_64-linux-fast bot.
The problem was that the contents of this stream are aligned to 4 byte,
and the paddings were created just by incrementing `Offset`, so paddings
had undefined values. When the entire stream is written to an output,
it triggered msan.
llvm-svn: 305541
It doesn't seem relevant to set an address space limit - this isn't
important in any sense that I'm aware & it gets in the way of things
that use a lot of address space, like llvm-symbolizer.
This came up when I realized that bugpoint regression tests were much
slower with -gsplit-dwarf than plain -g. Turned out that bugpoint
subprocesses (opt, etc) were crashing and doing symbolization - but
bugpoint runs those subprocesses with a 400MB memory limit. So with
plain -g, mmaping the opt binary would exceed the memory limit, fail,
and thus be really fast - no symbolization occurred. Whereas with
-gsplit-dwarf, comically, having less to map in, it would succeed and
then spend lots of time symbolizing.
I've fixed at least the critical part of bugpoint's perf problem there
by adding an option to allow bugpoint to disable symbolization. Thus
improving the perfromance for -gsplit-dwarf and making the -g-esque
speed available without this quirk/accidental benefit.
llvm-svn: 305242
This is a precursor to another change (coming soon) that aims to make
FoldingSet's API more type-safe. Without this, the type-safety change
would just duplicate 4 more public methods between the already very
similar classes.
This renames FoldingSetImpl to FoldingSetBase so it's consistent with
the FooBase -> FooImpl<T> -> Foo<T> convention we seem to have with
other containers.
llvm-svn: 305231
Initial implementation - needs similar work/testing for other tools
bugpoint invokes (llc, lli I think, maybe more).
Alternatively (as suggested by chandlerc@) an environment variable could
be used. This would allow the option to pass transparently through user
scripts, pass to compilers if they happened to be LLVM-ish, etc.
I worry a bit about using cl::opt in the crash handling code - LLVM
might crash early, perhaps before the cl::opt is properly initialized?
Or at least before arguments have been parsed?
- should be OK since it defaults to "pretty", so if the crash is very
early in opt parsing, etc, then crash reports will still be symbolized.
I shyed away from doing this with an environment variable when I
realized that would require copying the existing environment and
appending the env variable of interest. But it seems there's no existing
LLVM API for accessing the environment (even the Support tests for
process launching have their own ifdefs for getting the environment). It
could be added, but seemed like a higher bar/untested codepath to
actually add environment variables.
Most importantly, this reduces the runtime of test/BugPoint/metadata.ll
in a split-dwarf Debug build from 1m34s to 6.5s by avoiding a lot of
symbolication. (this wasn't a problem for non-split-dwarf builds only
because the executable was too large to map into memory (due to bugpoint
setting a 400MB memory (including address space - not sure why? Going to
remove that) limit on the child process) so symbolication would fail
fast & wouldn't spend all that time parsing DWARF, etc)
Reviewers: chandlerc, dannyb
Differential Revision: https://reviews.llvm.org/D33804
llvm-svn: 305056
Summary:
This patch updates Triple::isCompatibleWith to make armxx and thumbxx
triples compatible, as long as the subarch, vendor, os, envorionment and
object format match. Thumb/ARM code generation should be controlled
using the thumb-mode per-function target feature rather than by the
triple to allow mixing Thumb and ARM functions.
D33448 updates Clang's codegen to add thumb-mode for all functions with
armxx or thumbxx triples.
Reviewers: echristo, t.p.northover, rafael, kristof.beyls, rengolin, tejohnson
Reviewed By: tejohnson
Subscribers: rinon, eugenis, pcc, srhines, aemerson, mehdi_amini, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33287
llvm-svn: 304884
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
Summary:
I would like to add printing of registered targets to clang's version
information. For this to work correctly, the VersionPrinter logic in
CommandLine.cpp should support printing to arbitrary raw_ostreams,
instead of always defaulting to outs().
Add a raw_ostream& parameter to the function pointer type used for
VersionPrinter, and while doing so, introduce a typedef for convenience.
Note that VersionPrinter::print() will still default to using outs(),
the clang part will necessarily go into a separate review.
Reviewers: beanz, chandlerc, dberris, mehdi_amini, zturner
Reviewed By: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33899
llvm-svn: 304835
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
