The computation here didn't really make sense to me, and reported
wildy different results depending on the flat work group size
attribute.
I think this should really report a range derived from the possible
work group size bounds, and only allow an occupancy that is a multiple
of the group size.
Summary:
https://gist.github.com/modocache/ed7c62f6e570766c0f39b35dad675c2f
is an example of a small C++ program that uses C++20 coroutines that
is difficult to debug, due to the loss of debug info for variables that
"spill" across coroutine suspension boundaries. This patch addresses
that issue by inserting 'llvm.dbg.declare' intrinsics that point the
debugger to the variables' location at an offset to the coroutine frame.
With this patch, I confirmed that running the 'frame variable' commands in
https://gist.github.com/modocache/ed7c62f6e570766c0f39b35dad675c2f at
the specified breakpoints results in the correct values being printed
for coroutine frame variables 'i' and 'j' when using an lldb built from
trunk, as well as with gdb 8.3 (lldb 9.0.1, however, could not print the
values). The added test case also verifies this improved behavior.
The existing coro-debug.ll test case is also modified to reflect the
locations at which Clang actually places calls to 'dbg.declare', and
additional checks are added to ensure this patch works as intended in that
example as well.
Reviewers: vsk, jmorse, GorNishanov, lewissbaker, wenlei
Subscribers: EricWF, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75338
Summary: This patch renames the "llvm-gsym" tool directory to "llvm-gsymutil". Dependencies are also reduced to the bare minimum for llvm-gsymutil.
Reviewers: aprantl, thakis
Subscribers: mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75291
Summary:
This change checks for the return type in the frontend and adds a flag
to the DISubroutineType to indicate that the option should be added in
CodeViewDebug.
Previously function types sometimes appeared twice in the PDB: once with
"returns cxx udt" and once without.
See https://bugs.llvm.org/show_bug.cgi?id=44785.
Reviewers: rnk, asmith
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75215
reinterpret_cast'ing the block base address directly to a uint64_t leaves the
high bits in an implementation-defined state, but JITLink expects them to be
zero. Switching to pointerToJITTargetAddress for the cast should fix this.
This should fix the jitlink test failures that we have seen on some of the
32-bit testers.
This fixes a miscompile that happened because a DBG_VALUE interfered
with the MachineOutliner's liveness analysis.
Inserting a DBG_VALUE after a terminator breaks predicates on MBB such
as isReturnBlock(). And the resulting DBG_VALUE cannot be "live".
I plan to introduce a MachineVerifier check for this situation in a
follow up.
rdar://59859175
Testing: check-llvm, LNT build with a stage2 compiler & entry values
enabled
Differential Revision: https://reviews.llvm.org/D75548
uops.info says these should be 15 cycle instructions. Uops.info also shows the 512-bit form uses port 0 and 5 for both register and memory. We had memory using 0 and 1.
Differential Revision: https://reviews.llvm.org/D75549
If we go with D75412, we no longer depend on the scalar type directly. So we don't need to avoid using i64. We already have AVX1 fallback patterns with i32 and i64 scalar types so we don't need to avoid using integer types on AVX1.
Differential Revision: https://reviews.llvm.org/D75413
Also add a DAG combine to combine different sized broadcasts from
constant pool to avoid a regression.
Differential Revision: https://reviews.llvm.org/D75412
Summary: This patch adds an analysis pass to collect loop nests and
summarize properties of the nest (e.g the nest depth, whether the nest
is perfect, what's the innermost loop, etc...).
The motivation for this patch was discussed at the latest meeting of the
LLVM loop group (https://ibm.box.com/v/llvm-loop-nest-analysis) where we
discussed
the unimodular loop transformation framework ( “A Loop Transformation
Theory and an Algorithm to Maximize Parallelism”, Michael E. Wolf and
Monica S. Lam, IEEE TPDS, October 1991). The unimodular framework
provides a convenient way to unify legality checking and code generation
for several loop nest transformations (e.g. loop reversal, loop
interchange, loop skewing) and their compositions. Given that the
unimodular framework is applicable to perfect loop nests this is one
property of interest we expose in this analysis. Several other utility
functions are also provided. In the future other properties of interest
can be added in a centralized place.
Authored By: etiotto
Reviewer: Meinersbur, bmahjour, kbarton, Whitney, dmgreen, fhahn,
reames, hfinkel, jdoerfert, ppc-slack
Reviewed By: Meinersbur
Subscribers: bryanpkc, ppc-slack, mgorny, hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D68789
```
// clang -c -gdwarf-5 a.s -o a.o
.section .init; ret
.text; ret
```
.debug_info contains DW_AT_ranges and llvm-dwarfdump will report
a verification error because .debug_rnglists does not exist (not
implemented).
This patch generates .debug_rnglists for assembly files.
emitListsTableHeaderStart() in DwarfDebug.cpp can be shared with
MCDwarf.cpp. Because CodeGen depends on MC, I move the function to
MCDwarf.cpp
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D75375
Summary:
Follow up from D75377. If the subvector is byte sized and the
index is aligned to the subvector size, we can shrink the load.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: dbabokin, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75434
The build_vector needs to be the only user of the data, but the
chain will likely have another use. So we can't make sure the
build_vector is the only user of the node.
The expected output is erroneous and will be corrected alongside a fix
to ensure stack arguments are widened to register width before writing
to the parameter save area.
On SystemZ there are a set of "access registers" that can be copied in and
out of 32-bit GPRs with special instructions. These instructions can only
perform the copy using low 32-bit parts of the 64-bit GPRs. However, the
default register class for 32-bit integers is GRX32, which also contains the
high 32-bit part registers.
In order to never end up with a case of such a COPY into a high reg, this
patch adds a new simple pre-RA pass that selects such COPYs into target
instructions.
This pass also handles COPYs from CC (Condition Code register), and COPYs to
CC can now also be emitted from a high reg in copyPhysReg().
Fixes: https://bugs.llvm.org/show_bug.cgi?id=44254
Review: Ulrich Weigand.
Differential Revision: https://reviews.llvm.org/D75014
Summary:
The argument that sets the prefetch type of a prefetch intrinsic must
be an immediate value.
Reviewers: andwar, sdesmalen, efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75482
Use MIOperand in collectLocalKilledOperands to make the search
global, as we already have to search for global uses too. This
allows us to delete more dead code when tail predicating.
Differential Revision: https://reviews.llvm.org/D75167
In RDA, check against the already decided dead instructions when
looking at users. This allows an instruction to be removed if it
has multiple users, but they're all dead.
This means that IT instructions can be considered killed once all
the itstate using instructions are dead.
Differential Revision: https://reviews.llvm.org/D75245
SUMMARY:
1.if there is a gap between the end virtual address of one section and the beginning virtual address of the next section, the XCOFFObjectWriter.cpp will hit a assert.
2.as discussed in the patch https://reviews.llvm.org/D66969,
since implemented the function description. We can output the raw object data for function.
we need to create a test for raw text section content and test section header for xcoff object file.
Reviewer: daltenty,hubert.reinterpretcast,jasonliu
Differential Revision: https://reviews.llvm.org/D71845
The incoming back chain slot was implicitly allocated whenever a GPR was
saved in SystemZFrameLowering::getRegSpillOffset(), but in cases where no
GPRs were saved/restored this did not take effect.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D75367
Response files where not being correctly read on Windows, this change
fixes the issue and adds some tests.
Differential Revision: https://reviews.llvm.org/D69665
Forming subtract with overflow is beneficial on SystemZ, just like additions.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D75290
Summary: This patch adds an analysis pass to collect loop nests and
summarize properties of the nest (e.g the nest depth, whether the nest
is perfect, what's the innermost loop, etc...).
The motivation for this patch was discussed at the latest meeting of the
LLVM loop group (https://ibm.box.com/v/llvm-loop-nest-analysis) where we
discussed
the unimodular loop transformation framework ( “A Loop Transformation
Theory and an Algorithm to Maximize Parallelism”, Michael E. Wolf and
Monica S. Lam, IEEE TPDS, October 1991). The unimodular framework
provides a convenient way to unify legality checking and code generation
for several loop nest transformations (e.g. loop reversal, loop
interchange, loop skewing) and their compositions. Given that the
unimodular framework is applicable to perfect loop nests this is one
property of interest we expose in this analysis. Several other utility
functions are also provided. In the future other properties of interest
can be added in a centralized place.
Authored By: etiotto
Reviewer: Meinersbur, bmahjour, kbarton, Whitney, dmgreen, fhahn,
reames, hfinkel, jdoerfert, ppc-slack
Reviewed By: Meinersbur
Subscribers: bryanpkc, ppc-slack, mgorny, hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D68789
Summary: This patch adds a new way to query operand bundles of an llvm.assume that is much better suited to some users like the Attributor that need to do many queries on the operand bundles of llvm.assume. Some modifications of the IR like replaceAllUsesWith can cause information in the map to be outdated, so this API is more suited to analysis passes and passes that don't make modification that could invalidate the map.
Reviewers: jdoerfert, sstefan1, uenoku
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75020
This patch adds a getPlan accessor to VPBlockBase, which finds the entry
block of the plan containing the block and returns the plan set for this
block.
VPBlockBase contains a VPlan pointer, but it should only be set for
the entry block of a plan. This allows moving blocks without updating
the pointer for each moved block and in the future we might introduce a
parent relationship between plans and blocks, similar to the one in LLVM IR.
Reviewers: rengolin, hsaito, fhahn, Ayal, dorit, gilr
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D74445
