It's never null - the reason it's modeled as a pointer is because the
pass can't init it in its ctor. Passing by ref simplifies the code, too,
as the null checks were unnecessary complexity.
Differential Revision: https://reviews.llvm.org/D89171
If the metadata is valid yaml, we can print it, even if it failed
validation. That makes it easier to debug any wrong metadata.
Differential Revision: https://reviews.llvm.org/D89243
60b852092c98dbdc6248d60109d90ae6f8ad841c introduced SCEV verification to
deleteDeadLoop, but it appears this check is currently a bit over-eager
and some users of deleteDeadLoop appear to only patch up SE after
calling it (e.g. PR47753).
Remove the extra check for now. We can consider adding it back after we
tracked down the source of the inconsistency for PR47753.
Extend loadSRsrcFromVGPR to allow moving a range of instructions into
the loop. The call instruction is surrounded by copies into physical
registers which should be part of the waterfall loop.
Differential Revision: https://reviews.llvm.org/D88291
If value tracking can confirm that a shift value is less than the type bitwidth then we can more confidently fold general or(shl(a,x),lshr(b,sub(bw,x))) patterns to a funnel/rotate intrinsic pattern without causing bad codegen regressions in the backend (see D89139).
Reapplied after the shift canonicalization in rG02295e6d1a15 which removed the need to flip the shift values.
Differential Revision: https://reviews.llvm.org/D88783
After rG02295e6d1a15 we no longer need to invert the shift values for fshr - this is just hidden at the moment as funnel shifts only ever match for constant values so never use the fshr "Sub on SHL" path.
Based on a discussion on D88783, if we're promoting a funnel shift to a width at least twice the size as the original type, then we can use the 'double shift' patterns (shifting the concatenated sources).
Differential Revision: https://reviews.llvm.org/D89139
VE doesn't have instruction for copysign, so expand it. Add a
regression test also.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D89228
Currently the idiom for mapping optional fields is:
ObjectMapper O(Val, P);
if (!O.map("required1", Out.R1) || !O.map("required2", Out.R2))
return false;
O.map("optional1", Out.O1); // ignore result
return true;
If `optional1` is present but malformed, then we won't detect/report
that error. We may even leave `Out` in an incomplete state while returning true.
Instead, we'd often prefer to ignore `optional1` if it is absent, but otherwise
behave just like map().
Differential Revision: https://reviews.llvm.org/D89128
VE doesn't have fneg or frem instruction, so change them to expand. Add
regression tests also.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D89205
VE doesn't have BRCOND instruction, so need to expand it. Also add
a regression test.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D89173
Summary: Since willreturn will soon be added as default attribute, we can end up with both noreturn and willreturn on the same intrinsic. This was exposed by llvm.wasm.throw which has IntrNoReturn.
Reviewers: jdoerfert, arsenm
Differential Revision: https://reviews.llvm.org/D88644
Specification for `SHT_HASH` table says (https://refspecs.linuxbase.org/elf/gabi4+/ch5.dynamic.html#hash)
that it contains `Elf32_Word` entries for both `32/64` bit objects.
But there is a problem with `EM_S390` and `ELF::EM_ALPHA` platforms: they use 8-bytes entries.
(see the issue reported: https://bugs.llvm.org/show_bug.cgi?id=47681).
Currently we might infer the size of the dynamic symbols table from hash table,
but because of the issue mentioned, the calculation is wrong. And also we don't dump the hash table
properly.
I am not sure if we want to support 8-bytes entries as they violates specification and also the
`.hash` table is kind of deprecated by itself (the `.gnu.hash` table is used nowadays).
So, the solution this patch suggests is to ban using of the hash table on `EM_S390/EM_ALPHA` platforms.
Differential revision: https://reviews.llvm.org/D88817
While we indeed can't treat them as no-ops, i believe we can/should
do better than just modelling them as `unknown`. `inttoptr` story
is complicated, but for `ptrtoint`, it seems straight-forward
to model it just as a zext-or-trunc of unknown.
This may be important now that we track towards
making inttoptr/ptrtoint casts not no-op,
and towards preventing folding them into loads/etc
(see D88979/D88789/D88788)
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D88806
I have introduced a new template PolySize class, where the template
parameter determines the type of quantity, i.e. for an element
count this is just an unsigned value. The ElementCount class is
now just a simple derivation of PolySize<unsigned>, whereas TypeSize
is more complicated because it still needs to contain the uint64_t
cast operator, since there are still many places in the code that
rely upon this implicit cast. As such the class also still needs
some of it's own operators.
I've tried to minimise the amount of code in the base PolySize
class, which led to a couple of changes:
1. In some places we were relying on '==' operator comparisons
between ElementCounts and the scalar value 1. I didn't put this
operator in the new PolySize class, and thought it was actually
clearer to use the isScalar() function instead.
2. I removed the isByteSized function and replaced it with calls
to isKnownMultipleOf(8).
I've also renamed NextPowerOf2 to be coefficientNextPowerOf2 so
that it's more consistent with coefficientDivideBy.
Differential Revision: https://reviews.llvm.org/D88409
And another step towards transforms not introducing inttoptr and/or
ptrtoint casts that weren't there already.
As we've been establishing (see D88788/D88789), if there is a int<->ptr cast,
it basically must stay as-is, we can't do much with it.
I've looked, and the most source of new such casts being introduces,
as far as i can tell, is this transform, which, ironically,
tries to reduce count of casts..
On vanilla llvm test-suite + RawSpeed, @ `-O3`, this results in
-33.58% less `IntToPtr`s (19014 -> 12629)
and +76.20% more `PtrToInt`s (18589 -> 32753),
which is an increase of +20.69% in total.
However just on RawSpeed, where i know there are basically
none `IntToPtr` in the original source code,
this results in -99.27% less `IntToPtr`s (2724 -> 20)
and +82.92% more `PtrToInt`s (4513 -> 8255).
which is again an increase of 14.34% in total.
To me this does seem like the step in the right direction,
we end up with strictly less `IntToPtr`, but strictly more `PtrToInt`,
which seems like a reasonable trade-off.
See https://reviews.llvm.org/D88860 / https://reviews.llvm.org/D88995
for some more discussion on the subject.
(Eventually, `CastInst::isNoopCast()`/`CastInst::isEliminableCastPair`
should be taught about this, yes)
Reviewed By: nlopes, nikic
Differential Revision: https://reviews.llvm.org/D88979
This expands upon the inloop reductions added in e9761688e41cb9e976,
allowing them to be inserted into tail folded loops. Reductions are
generates with the form:
x = select(mask, vecop, zero)
v = vecreduce.add(x)
c = add chain, v
Where zero here is chosen as the identity value for add reductions. The
backend is then expected to fold the select and the vecreduce into a
single predicated instruction.
Most of the code is fairly straight forward, except for the creation of
blockmasks which need to ensure they are created in dominance order. The
order they are added is altered to be after any phis, keeping the
requirements for the underlying IR.
Differential Revision: https://reviews.llvm.org/D84451
As shown in the affected test, we could increase instruction
count without this limitation. There's another test with extra
use that shows we still convert directly to a real "sext" if
possible.
This is my first LLVM patch, so please tell me if there are any process issues.
The main observation for this patch is that we can lower UMIN/UMAX with v8i16 by using unsigned saturated subtractions in a clever way. Previously this operation was lowered by turning the signbit of both inputs and the output which turns the unsigned minimum/maximum into a signed one.
We could use this trick in reverse for lowering SMIN/SMAX with v16i8 instead. In terms of latency/throughput this is the needs one large move instruction. It's just that the sign bit turning has an increased chance of being optimized further. This is particularly apparent in the "reduce" test cases. However due to the slight regression in the single use case, this patch no longer proposes this.
Unfortunately this argument also applies in reverse to the new lowering of UMIN/UMAX with v8i16 which regresses the "horizontal-reduce-umax", "horizontal-reduce-umin", "vector-reduce-umin" and "vector-reduce-umax" test cases a bit with this patch. Maybe some extra casework would be possible to avoid this. However independent of that I believe that the benefits in the common case of just 1 to 3 chained min/max instructions outweighs the downsides in that specific case.
Patch By: @TomHender (Tom Hender) ActuallyaDeviloper
Differential Revision: https://reviews.llvm.org/D87236
If value tracking can confirm that a shift value is less than the type bitwidth then we can more confidently fold general or(shl(a,x),lshr(b,sub(bw,x))) patterns to a funnel/rotate intrinsic pattern without causing bad codegen regressions in the backend (see D89139).
Differential Revision: https://reviews.llvm.org/D88783
This exposes the helper for other power-of-2 instcombine folds that I'm intending to add vector support to.
The helper only operated on power-of-2 constants so getExactLogBase2 is a more accurate name.
This patch is a refactoring of how we process spills and allocas during CoroSplit.
In the previous implementation, everything that needs to go to the heap is put into Spills, including all the values defined by allocas.
And the way to identify a Spill, is to check whether there exists a use-def relationship that crosses suspension points.
This approach is fundamentally confusing, and unfortunately, incorrect.
First of all, allocas are always process differently than spills, hence it's quite confusing to put them together. It's a much cleaner to separate them and process them separately.
Doing so simplify lots of code and makes the logic more clear and easier to reason about.
Secondly, use-def relationship is insufficient to decide whether a value defined by AllocaInst needs to go to the heap.
There are many cases where a value defined by AllocaInst can implicitly be used across suspension points without a direct use-def relationship.
For example, you can store the address of an alloca into the heap, and load that address after suspension. Or you can escape the address into an object through a function call.
Or you can have a PHINode that takes two allocas, and this PHINode is used across suspension point (when this happens, the existing implementation will spill the PHINode, a.k.a a stack adddress to the heap!).
All these issues suggest that we need to separate spill and alloca in order to properly implement this.
This patch does not yet fix these bugs, however it sets up the code in a better shape so that we can start fixing them in the next patch.
The core idea of this patch is to add a new struct called FrameDataInfo, which contains all Spills, all Allocas, and a map from each definition to its layout index in the frame (FieldIndexMap).
Spills and Allocas are identified, stored and processed independently. When they are initially added to the frame, we record their field index through FieldIndexMap. When the frame layout is finalized, we update each index into their final layout index.
In doing so, I also cleaned up a few things and also discovered a few other bugs.
Cleanups:
1. Found out that PromiseFieldId is not used, delete it.
2. Previously, SpillInfo is a vector, which is strange because every def can have multiple users. This patch cleans it up by turning it into a map from def to users.
3. Previously, a frame Field struct contains a list of Spills that field corresponds to. This isn't necessary since we only need the layout index for each given definition. This patch removes that list. Instead, we connect each field and definition using the FieldIndexMap.
4. All the loops that process Spills are simplified now because we use a map instead of a vector.
Bugs:
It seems that we are only keeping llvm.dbg.declare intrinsics in the .resume part of the function. The ramp function will no longer has it. This means we are dropping some debug information in the ramp function.
The next step is to start fixing the bugs where the implementation fails to identify some allocas that should live on the frame.
Differential Revision: https://reviews.llvm.org/D88872
The bextri intrinsic has a ImmArg attribute which will be converted
in SelectionDAG using TargetConstant. We previously converted this
to a plain Constant to allow X86ISD::BEXTR to call SimplifyDemandedBits
on it.
But while trying to decide if D89178 was safe, I realized that
this conversion of TargetConstant to Constant would be one case
where that would break.
So this patch adds a new opcode specifically for the immediate case.
And then teaches computeKnownBits and SimplifyDemandedBits to also
handle it, but not try to SimplifyDemandedBits on it. To make up
for that, I immediately masked the constant to 16 bits when
converting from the intrinsic node to the X86ISD node.
