Shadow stack solution introduces a new stack for return addresses only.
The HW has a Shadow Stack Pointer (SSP) that points to the next return address.
If we return to a different address, an exception is triggered.
The shadow stack is managed using a series of intrinsics that are introduced in this patch as well as the new register (SSP).
The intrinsics are mapped to new instruction set that implements CET mechanism.
The patch also includes initial infrastructure support for IBT.
For more information, please see the following:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
Differential Revision: https://reviews.llvm.org/D40223
Change-Id: I4daa1f27e88176be79a4ac3b4cd26a459e88fed4
llvm-svn: 318996
As a side effect, the .debug_line section will be dumped in physical
order, rather than in the order that compile units refer to their
associated portions of the .debug_line section. These are probably
always the same order anyway, and no tests noticed the difference.
Differential Revision: https://reviews.llvm.org/D39854
llvm-svn: 318839
In 2010 a commit with no testcase and no further explanation
explicitly disabled the handling of inlined variables in
EmitFuncArgumentDbgValue(). I don't think there is a good reason for
this any more and re-enabling this adds debug locations for variables
associated with an LLVM function argument in functions that are
inlined into the first basic block. The only downside of doing this is
that we may insert a DBG_VALUE before the inlined scope, but (1) this
could be filtered out later, and (2) LiveDebugValues will not
propagate it into subsequent basic blocks if they don't dominate the
variable's lexical scope, so this seems like a small price to pay.
rdar://problem/26228128
llvm-svn: 317702
Similar to how llvm::salvagDebugInfo hooks into InstCombine, this adds
a hook that can be invoked before an SDNode that is associated with an
SDDbgValue is erased to capture the effect of the deleted node in a
DIExpression.
The motivating example is an SDDebugValue attached to an ADD operation
that gets folded into a LOAD+OFFSET operation.
rdar://problem/32121503
llvm-svn: 316525
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Recommit after being reverted in r315299.
Differential revision: https://reviews.llvm.org/D36993
llvm-svn: 315316
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Differential revision: https://reviews.llvm.org/D36993
llvm-svn: 315297
Summary:
When reinserting debug values after register allocation, make sure to
insert debug values after each redefinition of debug value register in
the slot index range. The reason for this is that DwarfDebug will end
the range of a debug variable when the physical reg is defined. For
instructions with e.g. tied operands this result in prematurely ended
debug range.
This resolves pr34545
Patch by Karl-Johan Karlsson and Bjorn Pettersson
Reviewers: rnk, aprantl
Reviewed By: rnk
Subscribers: bjope, llvm-commits
Differential Revision: https://reviews.llvm.org/D38229
llvm-svn: 314974
Summary:
This should fix a regression introduced by r313786, which switched from
MachineInstr::isIndirectDebugValue() to checking if operand 1 is an
immediate. I didn't have a test case for it until now.
A single UserValue, which approximates a user variable, may have many
DBG_VALUE instructions that disagree about whether the variable is in
memory or in a virtual register. This will become much more common once
we have llvm.dbg.addr, but you can construct such a test case manually
today with llvm.dbg.value.
Before this change, we would get two UserValues: one for direct and one
for indirect DBG_VALUE instructions describing the same variable. If we
build separate interval maps for direct and indirect locations, we will
end up accidentally coalescing identical DBG_VALUE intervals that need
to remain separate because they are broken up by intervals of the
opposite direct-ness.
Reviewers: aprantl
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37932
llvm-svn: 314819
Issues addressed since original review:
- Avoid bug in regalloc greedy/machine verifier when forwarding to use
in an instruction that re-defines the same virtual register.
- Fixed bug when forwarding to use in EarlyClobber instruction slot.
- Fixed incorrect forwarding to register definitions that showed up in
explicit_uses() iterator (e.g. in INLINEASM).
- Moved removal of dead instructions found by
LiveIntervals::shrinkToUses() outside of loop iterating over
instructions to avoid instructions being deleted while pointed to by
iterator.
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
doing so can break code that implicitly relies on the physical
register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
can break the machine verifier by creating LiveRanges that don't
end on a use (since the undef operand is not considered a use).
[MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
llvm-svn: 314729
Summary:
This code iterates the 'Orders' vector in parallel with the DbgValue
list, emitting all DBG_VALUEs that occurred between the last IR order
insertion point and the next insertion point. This assumes the
SDDbgValue list is sorted in IR order, which it usually is. However, it
is not sorted when a node with a debug value is replaced with another
one. When this happens, TransferDbgValues is called, and the new value
is added to the end of the list.
The problem can be solved by stably sorting the list by IR order.
Reviewers: aprantl, Ka-Ka
Reviewed By: aprantl
Subscribers: MatzeB, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D38197
llvm-svn: 314114
The fix is to avoid invalidating our insertion point in
replaceDbgDeclare:
Builder.insertDeclare(NewAddress, DIVar, DIExpr, Loc, InsertBefore);
+ if (DII == InsertBefore)
+ InsertBefore = &*std::next(InsertBefore->getIterator());
DII->eraseFromParent();
I had to write a unit tests for this instead of a lit test because the
use list order matters in order to trigger the bug.
The reduced C test case for this was:
void useit(int*);
static inline void inlineme() {
int x[2];
useit(x);
}
void f() {
inlineme();
inlineme();
}
llvm-svn: 313905
.. as well as the two subsequent changes r313826 and r313875.
This leads to segfaults in combination with ASAN. Will forward repro
instructions to the original author (rnk).
llvm-svn: 313876
Summary:
There already was code that tried to remove the dbg.declare, but that code
was placed after we had called
I->replaceAllUsesWith(UndefValue::get(I->getType()));
on the alloca, so when we searched for the relevant dbg.declare, we
couldn't find it.
Now we do the search before we call RAUW so there is a chance to find it.
An existing testcase needed update due to this. Two dbg.declare with undef
were removed and then suddenly one of the two CHECKS failed.
Before this patch we got
call void @llvm.dbg.declare(metadata i24* undef, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 32, 24)), !dbg !15
call void @llvm.dbg.declare(metadata %struct.prog_src_register* undef, metadata !14, metadata !DIExpression()), !dbg !15
call void @llvm.dbg.value(metadata i32 0, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 0, 32)), !dbg !15
call void @llvm.dbg.value(metadata i32 0, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 32, 24)), !dbg !15
and with it we get
call void @llvm.dbg.value(metadata i32 0, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 0, 32)), !dbg !15
call void @llvm.dbg.value(metadata i32 0, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 32, 24)), !dbg !15
However, the CHECKs in the testcase checked things in a silly order, so
they only passed since they found things in the first dbg.declare. Now
we changed the order of the checks and the test passes.
Reviewers: rnk
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37900
llvm-svn: 313875
Summary:
This implements the design discussed on llvm-dev for better tracking of
variables that live in memory through optimizations:
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117222.html
This is tracked as PR34136
llvm.dbg.addr is intended to be produced and used in almost precisely
the same way as llvm.dbg.declare is today, with the exception that it is
control-dependent. That means that dbg.addr should always have a
position in the instruction stream, and it will allow passes that
optimize memory operations on local variables to insert llvm.dbg.value
calls to reflect deleted stores. See SourceLevelDebugging.rst for more
details.
The main drawback to generating DBG_VALUE machine instrs is that they
usually cause LLVM to emit a location list for DW_AT_location. The next
step will be to teach DwarfDebug.cpp how to recognize more DBG_VALUE
ranges as not needing a location list, and possibly start setting
DW_AT_start_offset for variables whose lifetimes begin mid-scope.
Reviewers: aprantl, dblaikie, probinson
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37768
llvm-svn: 313825
After r313775, it's easier to maintain a parallel BitVector of spilled
locations indexed by location number.
I wasn't able to build a good reduced test case for this iteration of
the bug, but I added a more direct assertion that spilled values must
use frame index locations. If this bug reappears, it won't only fire on
the NEON vector code that we detected it on, but on medium-sized
integer-only programs as well.
llvm-svn: 313786
This reverts r313640, originally r313400, one more time for essentially
the same issue. My BitVector of spilled location numbers isn't working
because we coalesce identical DBG_VALUE locations as we rewrite them,
invalidating the location numbers used to index the BitVector.
llvm-svn: 313679
I forgot to zero out the BitVector when reusing it between UserValues.
Later uses of the same location number for a different UserValue would
falsely indicate that they were spilled. Usually this would lead to
incorrect debug info, but in some cases they would indicate something
nonsensical like a memory location based on a vector register (Q8 on
ARM).
llvm-svn: 313640
This caused asserts in Chromium. See http://crbug.com/766261
> Summary:
> This comes up in optimized debug info for C++ programs that pass and
> return objects indirectly by address. In these programs,
> llvm.dbg.declare survives optimization, which causes us to emit indirect
> DBG_VALUE instructions. The fast register allocator knows to insert
> DW_OP_deref when spilling indirect DBG_VALUE instructions, but the
> LiveDebugVariables did not until this change.
>
> This fixes part of PR34513. I need to look into why this doesn't work at
> -O0 and I'll send follow up patches to handle that.
>
> Reviewers: aprantl, dblaikie, probinson
>
> Subscribers: qcolombet, hiraditya, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D37911
llvm-svn: 313589
Summary:
This comes up in optimized debug info for C++ programs that pass and
return objects indirectly by address. In these programs,
llvm.dbg.declare survives optimization, which causes us to emit indirect
DBG_VALUE instructions. The fast register allocator knows to insert
DW_OP_deref when spilling indirect DBG_VALUE instructions, but the
LiveDebugVariables did not until this change.
This fixes part of PR34513. I need to look into why this doesn't work at
-O0 and I'll send follow up patches to handle that.
Reviewers: aprantl, dblaikie, probinson
Subscribers: qcolombet, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37911
llvm-svn: 313400
Summary:
Fixes PR34513.
Indirect DBG_VALUEs typically come from dbg.declares of non-trivially
copyable C++ objects that must be passed by address. We were already
handling the case where the virtual register gets allocated to a
physical register and is later spilled. That's what usually happens for
normal parameters that aren't NRVO variables: they usually appear in
physical register parameters, and are spilled later in the function,
which would correctly add deref.
NRVO variables are different because the dbg.declare can come much later
after earlier instructions cause the incoming virtual register to be
spilled.
Also, clean up this code. We only need to look at the first operand of a
DBG_VALUE, which eliminates the operand loop.
Reviewers: aprantl, dblaikie, probinson
Subscribers: MatzeB, qcolombet, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37929
llvm-svn: 313399
This breaks bootstrap builds, and is actually unnecessary. Tested
locally and it seems we can remove -debug-comile just fine.
Follow-up to D37791.
llvm-svn: 313238
Summary:
XRay had been assuming that the previous section is the "text" section
of the function when lowering the instrumentation map. Unfortunately
this is not a safe assumption, because we may be coming from lowering
debug type information for the function being lowered.
This fixes an issue with combining -gsplit-dwarf, -generate-type-units,
-debug-compile and -fxray-instrument for sole member functions. When the
split dwarf section is stripped, we're left with references from the
xray_instr_map to the debug section. The change now uses the function's
symbol instead of the previous section's start symbol.
We found the bug while attempting to strip the split debug sections off
an XRay-instrumented object file, which had a peculiar edge-case for
single-function classes where the single function is being lowered.
Because XRay had assocaited the instrumentation map for a function to
the debug types section instead of the function's section, the objcopy
call will fail due to the misplaced reference from the xray_instr_map
section.
Reviewers: pcc, dblaikie, echristo
Subscribers: llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D37791
llvm-svn: 313233
Since users typically don't really care about the .dwo / non.dwo
distinction, this patch makes it so dwarfdump --debug-<info,...> dumps
.debug_info and (if available) also .debug_info.dwo. This simplifies
the command line interface (I've removed all dwo-specific dump
options) and makes the tool friendlier to use.
Differential Revision: https://reviews.llvm.org/D37771
llvm-svn: 313207
This flag is unnecessary for testing because we can get the coverage
we need by adjusting CU attributes.
Differential Revision: https://reviews.llvm.org/D37725
llvm-svn: 313079
A prologue-end line record is emitted with an incorrect associated address,
which causes a debugger to show the beginning of function body to be inside
the prologue.
Patch written by Carlos Alberto Enciso.
Differential Revision: https://reviews.llvm.org/D37625
llvm-svn: 313047
As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.
In a nutshell, with this change
$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc
becomes
$ dwarfdump --debug-info --apple-objc
Differential Revision: https://reviews.llvm.org/D37714
llvm-svn: 312970
It solves issue of wrong section index evaluating for ranges when
base address is used.
Based on David Blaikie's patch D36097.
Differential revision: https://reviews.llvm.org/D37214
llvm-svn: 312477
Issues addressed since original review:
- Moved removal of dead instructions found by
LiveIntervals::shrinkToUses() outside of loop iterating over
instructions to avoid instructions being deleted while pointed to by
iterator.
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
doing so can break code that implicitly relies on the physical
register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
can break the machine verifier by creating LiveRanges that don't
end on a use (since the undef operand is not considered a use).
[MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
llvm-svn: 312328
It caused PR34387: Assertion failed: (RegNo < NumRegs && "Attempting to access record for invalid register number!")
> Issues identified by buildbots addressed since original review:
> - Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
> - The pass no longer forwards COPYs to physical register uses, since
> doing so can break code that implicitly relies on the physical
> register number of the use.
> - The pass no longer forwards COPYs to undef uses, since doing so
> can break the machine verifier by creating LiveRanges that don't
> end on a use (since the undef operand is not considered a use).
>
> [MachineCopyPropagation] Extend pass to do COPY source forwarding
>
> This change extends MachineCopyPropagation to do COPY source forwarding.
>
> This change also extends the MachineCopyPropagation pass to be able to
> be run during register allocation, after physical registers have been
> assigned, but before the virtual registers have been re-written, which
> allows it to remove virtual register COPY LiveIntervals that become dead
> through the forwarding of all of their uses.
llvm-svn: 312178
Issues identified by buildbots addressed since original review:
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
doing so can break code that implicitly relies on the physical
register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
can break the machine verifier by creating LiveRanges that don't
end on a use (since the undef operand is not considered a use).
[MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
llvm-svn: 312154
This change simplifies code that has to deal with
DIGlobalVariableExpression and mirrors how we treat DIExpressions in
debug info intrinsics. Before this change there were two ways of
representing empty expressions on globals, a nullptr and an empty
!DIExpression().
If someone needs to upgrade out-of-tree testcases:
perl -pi -e 's/(!DIGlobalVariableExpression\(var: ![0-9]*)\)/\1, expr: !DIExpression())/g' <MYTEST.ll>
will catch 95%.
llvm-svn: 312144
Summary:
Based on Fred's patch here: https://reviews.llvm.org/D6771
I can't seem to commandeer the old review, so I'm creating a new one.
With that change the locations exrpessions are pretty printed inline in the
DIE tree. The output looks like this for debug_loc entries:
DW_AT_location [DW_FORM_data4] (0x00000000
0x0000000000000001 - 0x000000000000000b: DW_OP_consts +3
0x000000000000000b - 0x0000000000000012: DW_OP_consts +7
0x0000000000000012 - 0x000000000000001b: DW_OP_reg0 RAX, DW_OP_piece 0x4
0x000000000000001b - 0x0000000000000024: DW_OP_breg5 RDI+0)
And like this for debug_loc.dwo entries:
DW_AT_location [DW_FORM_sec_offset] (0x00000000
Addr idx 2 (w/ length 190): DW_OP_consts +0, DW_OP_stack_value
Addr idx 3 (w/ length 23): DW_OP_reg0 RAX, DW_OP_piece 0x4)
Simple locations without ranges are printed inline:
DW_AT_location [DW_FORM_block1] (DW_OP_reg4 RSI, DW_OP_piece 0x4, DW_OP_bit_piece 0x20 0x0)
The debug_loc(.dwo) dumping in changed accordingly to factor the code.
Reviewers: dblaikie, aprantl, friss
Subscribers: mgorny, javed.absar, hiraditya, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D37123
llvm-svn: 312042
Summary:
Most DIExpressions are empty or very simple. When they are complex, they
tend to be unique, so checking them inline is reasonable.
This also avoids the need for CodeGen passes to append to the
llvm.dbg.mir named md node.
See also PR22780, for making DIExpression not be an MDNode.
Reviewers: aprantl, dexonsmith, dblaikie
Subscribers: qcolombet, javed.absar, eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37075
llvm-svn: 311594
They won't affect the DWARF output, but they will mess with the
sorting of the fragments. This fixes the crash reported in PR34159.
https://bugs.llvm.org/show_bug.cgi?id=34159
llvm-svn: 311217
This patch teaches the SDag type legalizer how to split up debug info for
integer values that are split into a hi and lo part.
(re-commit)
Differential Revision: https://reviews.llvm.org/D36805
llvm-svn: 311181
This patch teaches the SDag type legalizer how to split up debug info for
integer values that are split into a hi and lo part.
Differential Revision: https://reviews.llvm.org/D36805
llvm-svn: 311102
The %T lit expansion expands to a common directory shared between all the tests in the same directory, which is unexpected and unintuitive, and more importantly, it's been a source of subtle race conditions and flaky tests. In https://reviews.llvm.org/D35396, it was agreed that it would be best to simply ban %T and only keep %t, which is unique to each test. When a test needs a temporary directory, it can just create one using mkdir %t.
This patch removes %T in llvm.
Differential Revision: https://reviews.llvm.org/D36495
llvm-svn: 310953
Teaches llvm-dwarfdump to print section index and name of range
when it dumps .debug_info.
Differential revision: https://reviews.llvm.org/D36313
llvm-svn: 310915
The debug value live intervals computed by Live Debug Variables may extend
beyond the range of the debug location's lexical scope. In this case,
splitting of an interval can result in an interval outside of the scope being
created, causing extra unnecessary DBG_VALUEs to be emitted. To prevent this,
trim the intervals to the lexical scope.
This resolves PR33730.
Reviewers: aprantl
Differential Revision: https://reviews.llvm.org/D35953
llvm-svn: 309933
In the last half-dozen commits to LLVM I removed code that became dead
after removing the offset parameter from llvm.dbg.value gradually
proceeding from IR towards the backend. Before I can move on to
DwarfDebug and friends there is one last side-called offset I need to
remove: This patch modifies PrologEpilogInserter's use of the
DBG_VALUE's offset argument to use a DIExpression instead. Because the
PrologEpilogInserter runs at the Machine level I had to play a little
trick with a named llvm.dbg.mir node to get the DIExpressions to print
in MIR dumps (which print the llvm::Module followed by the
MachineFunction dump).
I also had to add rudimentary DwarfExpression support to CodeView and
as a side-effect also fixed a bug (CodeViewDebug::collectVariableInfo
was supposed to give up on variables with complex DIExpressions, but
would fail to do so for fragments, which are also modeled as
DIExpressions).
With this last holdover removed we will have only one canonical way of
representing offsets to debug locations which will simplify the code
in DwarfDebug (and future versions of CodeViewDebug once it starts
handling more complex expressions) and make it easier to reason about.
This patch is NFC-ish: All test case changes are for assembler
comments and the binary output does not change.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D36125
llvm-svn: 309751
Summary:
We already have information about static alloca stack locations in our
side table. Emitting instructions for them is inefficient, and it only
happens when the address of the alloca has been materialized within the
current block, which isn't often.
Reviewers: aprantl, probinson, dblaikie
Subscribers: jfb, dschuff, sbc100, jgravelle-google, hiraditya, llvm-commits, aheejin
Differential Revision: https://reviews.llvm.org/D36117
llvm-svn: 309729
Chromium's gold build seems to have trouble with this (gold produces
errors) - not sure if it's gold that's not coping with the valid
representation, or a bug in the implementation in LLVM, etc.
llvm-svn: 309630
Missed the resetting base address selections when going from a base
address version to zero base address for non-base-addressed entries.
llvm-svn: 309529
(from comments in the test)
Group ranges in a range list that apply to the same section and use a base
address selection entry to reduce the number of relocations to one reloc per
section per range list. DWARF5 debug_rnglist will be more efficient than this
in terms of relocations, but it's still better than one reloc per entry in a
range list.
This is an object/executable size tradeoff - shrinking objects, but growing
the linked executable. In one large binary tested, total object size (not just
debug info) shrank by 16%, entirely relocation entries. Linked executable
grew by 4%. This was with compressed debug info in the objects, uncompressed
in the linked executable. Without compression in the objects, the win would be
smaller (the growth of debug_ranges itself would be more significant).
llvm-svn: 309526
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
llvm-svn: 309426
DIImportedEntity has a line number, but not a file field. To determine
the decl_line/decl_file we combine the line number from the
DIImportedEntity with the file from the DIImportedEntity's scope. This
does not work correctly when the parent scope is a DINamespace or a
DIModule, both of which do not have a source file.
This patch adds a file field to DIImportedEntity to unambiguously
identify the source location of the using/import declaration. Most
testcase updates are mechanical, the interesting one is the removal of
the FIXME in test/DebugInfo/Generic/namespace.ll.
This fixes PR33822. See https://bugs.llvm.org/show_bug.cgi?id=33822
for more context.
<rdar://problem/33357889>
https://bugs.llvm.org/show_bug.cgi?id=33822
Differential Revision: https://reviews.llvm.org/D35583
llvm-svn: 308398
Avoid duplicating DictScope with hand-written names everywhere. Print
the S_-prefixed symbol kind for every record. This should make it easier
to search for certain kinds of records when debugging PDB linking.
llvm-svn: 307732
For the following motivating example
bool c();
void f();
bool start() {
bool result = c();
if (!c()) {
result = false;
goto exit;
}
f();
result = true;
exit:
return result;
}
we would previously generate a single DW_AT_const_value(1) because
only the DBG_VALUE in the second-to-last basic block survived
codegen. This patch improves the heuristic used to determine when a
DBG_VALUE is available at the beginning of its variable's enclosing
lexical scope:
- Stop giving singular constants blanket permission to take over the
entire scope. There is still a special case for constants in the
function prologue that we also miight want to retire later.
- Use the lexical scope information to determine available-at-entry
instead of proximity to the function prologue.
After this patch we generate a location list with a more accurate
narrower availability for the constant true value. As a pleasant side
effect, we also generate inline locations instead of location lists
where a loacation covers the entire range of the enclosing lexical
scope.
Measured on compiling llc with four targets this doesn't have an
effect on compile time and reduces the size of the debug info for llc
by ~600K.
rdar://problem/30286912
llvm-svn: 305599
Summary:
This patch is part of 3 patches that together form a single patch, but must be introduced in stages in order not to break things.
The way that LLVM interprets DW_OP_plus in DIExpression nodes is basically that of the DW_OP_plus_uconst operator since LLVM expects an unsigned constant operand. This unnecessarily restricts the DW_OP_plus operator, preventing it from being used to describe the evaluation of runtime values on the expression stack. These patches try to align the semantics of DW_OP_plus and DW_OP_minus with that of the DWARF definition, which pops two elements off the expression stack, performs the operation and pushes the result back on the stack.
This is done in three stages:
• The first patch (LLVM) adds support for DW_OP_plus_uconst.
• The second patch (Clang) contains changes all its uses from DW_OP_plus to DW_OP_plus_uconst.
• The third patch (LLVM) changes the semantics of DW_OP_plus and DW_OP_minus to be in line with its DWARF meaning. This patch includes the bitcode upgrade from legacy DIExpressions.
Patch by Sander de Smalen.
Reviewers: echristo, pcc, aprantl
Reviewed By: aprantl
Subscribers: fhahn, javed.absar, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D33894
llvm-svn: 305386
This is really a workaround for ThinLTO in particular - since it can
import partial CUs that may end up looking very similar/the same as
the same partial import in another ThinLTO compile.
An alternative fix would be to change the DICompileUnit metadata to
include a "primary file" or the like - and when importing for ThinLTO
set the primary file to the name of the DICompileUnit that is being
imported into. This involves changing the schema and would reduce the
excessive uniqueness in the hash that this change creates - allowing
diagnosing of more duplicate CUs than will be caught with this change.
But duplicate CUs can still be caught in non-ThinLTO builds & are mostly
a nuisance rather than a particularly deliberate/effective tool for
finding broken code. (arguably the hash could always include the dwo
file and nothing in fission would break, I think..)
Reapply of r304119 after adding a triple to the test and moving it
to the X86 directory.
llvm-svn: 304130
When the only use of a CU is for a subprogram that's only emitted into
the using CU (to avoid cross-CU references in DWO files), avoid creating
that CU at all.
Reapply of r304111 after adding a triple to the test and moving it
to the X86 directory.
llvm-svn: 304129
Consistent with GCC and addresses a shortcoming with ThinLTO where many
imported CUs may end up being empty (because the functions imported from
them either ended up not being used (and were then discarded, since
they're imported as available_externally) or optimized away entirely).
Test cases previously testing empty CUs (either intentionally, or
because they didn't need anything more complicated) had a trivial 'int'
or similar basic type added to their retained types list.
This is a first order approximation - a deeper implementation could do
things like:
1) Be more lazy about construction of the CU - for example if two CUs
containing a single identical retained type are linked together, with
this change one of the two CUs will be produced but empty (since a
duplicate type won't be produced).
2) Go further and invert all the CU links the same way the subprogram
link is inverted - keep named CU lists of retained types, macros, etc,
and have those link back to the CU. Then if they're emitted, the CU is
emitted, but never otherwise - this would allow the metadata itself to
be dropped earlier too, though it seems unlikely that's an important
optimization as there shouldn't be many CUs relative to the number of
other entities.
llvm-svn: 304020
This fixes an oversight in r300522, which changed alloca
dbg.values to no longer emit a DW_OP_deref.
The array.ll testcase was regenerated from source.
Fixes PR33166:
https://bugs.llvm.org/show_bug.cgi?id=33166
llvm-svn: 303897
Turns out gold doesn't use the DW_AT_GNU_pubnames to decide whether to
parse the rest of the DIEs when building gdb-index. This causes gold to
trip over LLVM's output when there are DW_FORM_ref_addr present.
Gold does use the presence of a debug_gnu_pub{names,types} entry for the
CU to skip parsing the debug_info portion, so make sure that's included
even when empty (technically, when empty there couldn't be any ref_addr
anyway - it only came up when gmlt didn't produce any (even non-empty)
pubnames - but given what that reveals about gold's implementation, this
seems like a good thing to do for consistency).
llvm-svn: 303894
Turns out that the Fission/Split DWARF package format (DWP) is currently
insufficient to handle cross-CU (ref_addr) references. So for now,
duplicate any debug info needed in these situations:
* inlined_subroutine's abstract_origin
* inlined variable's abstract_origin
* types
Keep the ref_addr behavior in general, including in the split DWARF
inline debug info that can be emitted into the object files for online
symbolication.
Keep a flag to use the old (ref_addr) behavior for testing ways of
addressing this limitation in the DWP tool (& for those not using DWP
packaging).
llvm-svn: 302858
Fixes inalloca parameters, which previously all pointed to the same
offset. Extend the test to use llvm-readobj so that we can test the
offset in a readable way.
llvm-svn: 302578
Summary:
For inalloca functions, this is a very common code pattern:
%argpack = type <{ i32, i32, i32 }>
define void @f(%argpack* inalloca %args) {
entry:
%a = getelementptr inbounds %argpack, %argpack* %args, i32 0, i32 0
%b = getelementptr inbounds %argpack, %argpack* %args, i32 0, i32 1
%c = getelementptr inbounds %argpack, %argpack* %args, i32 0, i32 2
tail call void @llvm.dbg.declare(metadata i32* %a, ... "a")
tail call void @llvm.dbg.declare(metadata i32* %c, ... "b")
tail call void @llvm.dbg.declare(metadata i32* %b, ... "c")
Even though these GEPs can be simplified to a constant offset from EBP
or RSP, we don't do that at -O0, and each GEP is computed into a
register. Registers used to compute argument addresses are typically
spilled and clobbered very quickly after the initial computation, so
live debug variable tracking loses information very quickly if we use
DBG_VALUE instructions.
This change moves processing of dbg.declare between argument lowering
and basic block isel, so that we can ask if an argument has a frame
index or not. If the argument lives in a register as is the case for
byval arguments on some targets, then we don't put it in the side table
and during ISel we emit DBG_VALUE instructions.
Reviewers: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32980
llvm-svn: 302483
Fixes the issue highlighted in
http://lists.llvm.org/pipermail/cfe-dev/2014-June/037500.html.
The DW_AT_decl_file and DW_AT_decl_line attributes on namespaces can
prevent LLVM from uniquing types that are in the same namespace. They
also don't carry any meaningful information.
rdar://problem/17484998
Differential Revision: https://reviews.llvm.org/D32648
llvm-svn: 301706
The previous algorithm processed one character at a time, which is very
painful on a modern CPU. Replace it with xxHash64, which both already
exists in the codebase and is fairly fast.
Patch from Scott Smith!
Differential Revision: https://reviews.llvm.org/D32509
llvm-svn: 301487