DeadStoreElimination can currently remove a small store rendered unnecessary by
a later larger one, but could not remove a larger store rendered unnecessary by
a series of later smaller ones. This adds that capability.
It works by keeping a map, which is used as an effective interval map, for each
store later overwritten only partially, and filling in that interval map as
more such stores are discovered. No additional walking or aliasing queries are
used. In the map forms an interval covering the the entire earlier store, then
it is dead and can be removed. The map is used as an interval map by storing a
mapping between the ending offset and the beginning offset of each interval.
I discovered this problem when investigating a performance issue with code like
this on PowerPC:
#include <complex>
using namespace std;
complex<float> bar(complex<float> C);
complex<float> foo(complex<float> C) {
return bar(C)*C;
}
which produces this:
define void @_Z4testSt7complexIfE(%"struct.std::complex"* noalias nocapture sret %agg.result, i64 %c.coerce) {
entry:
%ref.tmp = alloca i64, align 8
%tmpcast = bitcast i64* %ref.tmp to %"struct.std::complex"*
%c.sroa.0.0.extract.shift = lshr i64 %c.coerce, 32
%c.sroa.0.0.extract.trunc = trunc i64 %c.sroa.0.0.extract.shift to i32
%0 = bitcast i32 %c.sroa.0.0.extract.trunc to float
%c.sroa.2.0.extract.trunc = trunc i64 %c.coerce to i32
%1 = bitcast i32 %c.sroa.2.0.extract.trunc to float
call void @_Z3barSt7complexIfE(%"struct.std::complex"* nonnull sret %tmpcast, i64 %c.coerce)
%2 = bitcast %"struct.std::complex"* %agg.result to i64*
%3 = load i64, i64* %ref.tmp, align 8
store i64 %3, i64* %2, align 4 ; <--- ***** THIS SHOULD NOT BE HERE ****
%_M_value.realp.i.i = getelementptr inbounds %"struct.std::complex", %"struct.std::complex"* %agg.result, i64 0, i32 0, i32 0
%4 = lshr i64 %3, 32
%5 = trunc i64 %4 to i32
%6 = bitcast i32 %5 to float
%_M_value.imagp.i.i = getelementptr inbounds %"struct.std::complex", %"struct.std::complex"* %agg.result, i64 0, i32 0, i32 1
%7 = trunc i64 %3 to i32
%8 = bitcast i32 %7 to float
%mul_ad.i.i = fmul fast float %6, %1
%mul_bc.i.i = fmul fast float %8, %0
%mul_i.i.i = fadd fast float %mul_ad.i.i, %mul_bc.i.i
%mul_ac.i.i = fmul fast float %6, %0
%mul_bd.i.i = fmul fast float %8, %1
%mul_r.i.i = fsub fast float %mul_ac.i.i, %mul_bd.i.i
store float %mul_r.i.i, float* %_M_value.realp.i.i, align 4
store float %mul_i.i.i, float* %_M_value.imagp.i.i, align 4
ret void
}
the problem here is not just that the i64 store is unnecessary, but also that
it blocks further backend optimizations of the other uses of that i64 value in
the backend.
In the future, we might want to add a special case for handling smaller
accesses (e.g. using a bit vector) if the map mechanism turns out to be
noticeably inefficient. A sorted vector is also a possible replacement for the
map for small numbers of tracked intervals.
Differential Revision: http://reviews.llvm.org/D18586
llvm-svn: 273559
This reverts commit r273160, reapplying r273132.
RecursivelyDeleteTriviallyDeadInstructions cannot be called on a
parentless Instruction.
llvm-svn: 273162
This reverts commit r273132.
Breaks multiple test under /llvm/test:Transforms (e.g.
llvm/test:Transforms/LoopIdiom/basic.ll.test) under asan.
llvm-svn: 273160
After a store has been eliminated, when making sure that the
instruction iterator points to a valid instruction, dbg intrinsics are
now ignored as a new instruction.
Patch by Henric Karlsson.
Reviewed by Daniel Berlin.
Differential Revision: http://reviews.llvm.org/D21076
llvm-svn: 273141
Removing dead instructions requires remembering which operands have
already been removed. RecursivelyDeleteTriviallyDeadInstructions has
this logic, don't partially reimplement it in LoopIdiomRecognize.
This fixes PR28196.
llvm-svn: 273132
Change the underlying offset and comparisons to use int64_t instead of
uint64_t.
Patch by River Riddle!
Differential Revision: http://reviews.llvm.org/D21499
llvm-svn: 273105
This is a functional change for LLE and LDist. The other clients (LV,
LVerLICM) already had this explicitly enabled.
The temporary boolean parameter to LAA is removed that allowed turning
off speculation of symbolic strides. This makes LAA's caching interface
LAA::getInfo only take the loop as the parameter. This makes the
interface more friendly to the new Pass Manager.
The flag -enable-mem-access-versioning is moved from LV to a LAA which
now allows turning off speculation globally.
llvm-svn: 273064
This is indeed a much cleaner approach (thanks to Daniel Berlin
for pointing out), and also David/Sean for review.
Differential Revision: http://reviews.llvm.org/D21454
llvm-svn: 273032
pass manager passes' `run` methods.
This removes a bunch of SFINAE goop from the pass manager and just
requires pass authors to accept `AnalysisManager<IRUnitT> &` as a dead
argument. This is a small price to pay for the simplicity of the system
as a whole, despite the noise that changing it causes at this stage.
This will also helpfull allow us to make the signature of the run
methods much more flexible for different kinds af passes to support
things like intelligently updating the pass's progression over IR units.
While this touches many, many, files, the changes are really boring.
Mostly made with the help of my trusty perl one liners.
Thanks to Sean and Hal for bouncing ideas for this with me in IRC.
llvm-svn: 272978
This is still NFCI, so the list of clients that allow symbolic stride
speculation does not change (yes: LV and LoopVersioningLICM, no: LLE,
LDist). However since the symbolic strides are now managed by LAA
rather than passed by client a new bool parameter is used to enable
symbolic stride speculation.
The existing test Transforms/LoopVectorize/version-mem-access.ll checks
that stride speculation is performed for LV.
The previously added test Transforms/LoopLoadElim/symbolic-stride.ll
ensures that no speculation is performed for LLE.
The next patch will change the functionality and turn on symbolic stride
speculation in all of LAA's clients and remove the bool parameter.
llvm-svn: 272970
Redundant invariant loads can be CSE'ed with very little extra effort
over what early-cse already tracks, so it looks reasonable to make
early-cse handle this case.
llvm-svn: 272954
Daniel Berlin expressed some real concerns about the port and proposed
and alternative approach. I'll revert this for now while working on a
new patch, which I hope to put up for review shortly. Sorry for the churn.
llvm-svn: 272925
We should update results of the BranchProbabilityInfo after removing block in JumpThreading. Otherwise
we will get dangling pointer inside BranchProbabilityInfo cache.
Differential Revision: http://reviews.llvm.org/D20957
llvm-svn: 272891
Added checks to make sure the Scalarizer::transferMetadata() don't
remove valid debug locations from instructions. This is important as
the verifier pass require that e.g. inlinable callsites have a valid
debug location.
https://llvm.org/bugs/show_bug.cgi?id=27938
Patch by Karl-Johan Karlsson
Reviewers: dblaikie
Differential Revision: http://reviews.llvm.org/D20807
llvm-svn: 272884
We do not support splitting cleanuppad or catchswitches. This is
problematic for passes which assume that a loop is in loop simplify
form (the loop would have a dedicated exit block instead of sharing it).
While it isn't great that we don't support this for cleanups, we still
cannot make loop-simplify form an assertable precondition because
indirectbr will also disable these sorts of CFG cleanups.
This fixes PR28132.
llvm-svn: 272739
Nearly all the changes to this pass have been done while maintaining and
updating other parts of LLVM. LLVM has had another pass, SROA, which
has superseded ScalarReplAggregates for quite some time.
Differential Revision: http://reviews.llvm.org/D21316
llvm-svn: 272737
If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
llvm-svn: 272709
We move the loop rotate functions in a separate class to avoid passing multiple
parameters to each function. This cleanup will help with further development of
loop rotation. NFC.
Patch written by Aditya Kumar and Sebastian Pop.
Differential Revision: http://reviews.llvm.org/D21311
llvm-svn: 272672
The need for all these Lookup* functions is just because of calls to
getAnalysis inside methods (i.e. not at the top level) of the
runOnFunction method. They should be straightforward to clean up when
the old PM is gone.
llvm-svn: 272615
This reverts commit r272603 and adds a fix.
Big thanks to Davide for pointing me at r216244 which gives some insight
into how to fix this VS2013 issue. VS2013 can't synthesize a move
constructor. So the fix here is to add one explicitly to the
JumpThreadingPass class.
llvm-svn: 272607
This follows the approach in r263208 (for GVN) pretty closely:
- move the bulk of the body of the function to the new PM class.
- expose a runImpl method on the new-PM class that takes the IRUnitT and
pointers/references to any analyses and use that to implement the
old-PM class.
- use a private namespace in the header for stuff that used to be file
scope
llvm-svn: 272597
