This patch is part of D28975's breakdown - no change in output intended.
LV's code currently assumes the vectorized loop is a single basic block up
until predicateInstructions() is called. This patch removes two manifestations
of this assumption (loop phi incoming values, dominator tree update) by
replacing the use of vectorLoopBody with the vectorized loop's latch/header.
Differential Revision: https://reviews.llvm.org/D32040
llvm-svn: 300310
Summary:
In first order recurrences where phi's are used outside the loop,
we should generate an additional vector.extract of the second last element from
the vectorized phi update.
This is because we require the phi itself (which is the value at the second last
iteration of the vector loop) and not the phi's update within the loop.
Also fix the code gen when we just unroll, but don't vectorize.
Fixes PR32396.
Reviewers: mssimpso, mkuper, anemet
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D31979
llvm-svn: 300238
Refactoring InnerLoopVectorizer's vectorizeBlockInLoop() to provide
vectorizeInstruction(). Aligning DeadInstructions with its only user.
Facilitates driving the transformation by VPlan - follows
https://reviews.llvm.org/D28975 and its tentative breakdown.
Differential Revision: https://reviews.llvm.org/D31997
llvm-svn: 300183
In getEntryCost(), make the scalar type for a compare instruction that of the
operands, not i1. This is needed in order to call getCmpSelInstrCost() for a
compare in a sensible way, the same way as the LoopVectorizer does.
New test: test/Transforms/SLPVectorizer/SystemZ/SLP-cmp-cost-query.ll
Review: Matthew Simpson
https://reviews.llvm.org/D31601
llvm-svn: 300061
The cost for a branch after vectorization is very different depending on if
the vectorizer will if-convert the block (branch is eliminated), or if
scalarized and predicated blocks will be produced (branch duplicated before
each block). There is also the case of remaining scalar branches, such as the
back-edge branch.
This patch handles these cases differently with TTI based cost estimates.
Review: Matthew Simpson
https://reviews.llvm.org/D31175
llvm-svn: 300058
Since SystemZ supports vector element load/store instructions, there is no
need for extracts/inserts if a vector load/store gets scalarized.
This patch lets Target specify that it supports such instructions by means of
a new TTI hook that defaults to false.
The use for this is in the LoopVectorizer getScalarizationOverhead() method,
which will with this patch produce a smaller sum for a vector load/store on
SystemZ.
New test: test/Transforms/LoopVectorize/SystemZ/load-store-scalarization-cost.ll
Review: Adam Nemet
https://reviews.llvm.org/D30680
llvm-svn: 300056
getArithmeticInstrCost(), getShuffleCost(), getCastInstrCost(),
getCmpSelInstrCost(), getVectorInstrCost(), getMemoryOpCost(),
getInterleavedMemoryOpCost() implemented.
Interleaved access vectorization enabled.
BasicTTIImpl::getCastInstrCost() improved to check for legal extending loads,
in which case the cost of the z/sext instruction becomes 0.
Review: Ulrich Weigand, Renato Golin.
https://reviews.llvm.org/D29631
llvm-svn: 300052
In the vectorization of first order recurrence, we vectorize such
that the last element in the vector will be the one extracted to pass into the
scalar remainder loop. However, this is not true when there is a phi (other
than the primary induction variable) is used outside the loop.
In such a case, we need the value from the second last iteration (i.e.
the phi value), not the last iteration (which would be the phi update).
I've added a test case for this. Also see PR32396.
A follow up patch would generate the correct code gen for such cases,
and turn this vectorization on.
Differential Revision: https://reviews.llvm.org/D31910
Reviewers: mssimpso
llvm-svn: 299985
This patch reapplies r298620. The original patch was reverted because of two
issues. First, the patch exposed a bug in InstCombine that caused the Chromium
builds to fail (PR32414). This issue was fixed in r299017. Second, the patch
introduced a bug in the vectorizer's scalars analysis that caused test suite
builds to fail on SystemZ. The scalars analysis was too aggressive and marked a
memory instruction scalar, even though it was going to be vectorized. This
issue has been fixed in the current patch and several new test cases for the
scalars analysis have been added.
llvm-svn: 299770
The vectorizer tries to replace truncations of induction variables with new
induction variables having the smaller type. After r295063, this optimization
was applied to all integer induction variables, including non-primary ones.
When optimizing the truncation of a non-primary induction variable, we still
need to transform the new induction so that it has the correct start value.
This should fix PR32419.
Reference: https://bugs.llvm.org/show_bug.cgi?id=32419
llvm-svn: 298882
Reason: breaks linking Chromium with LLD + ThinLTO (a pass crashes)
LLVM bug: https://bugs.llvm.org//show_bug.cgi?id=32413
Original change description:
[LV] Vectorize GEPs
This patch adds support for vectorizing GEPs. Previously, we only generated
vector GEPs on-demand when creating gather or scatter operations. All GEPs from
the original loop were scalarized by default, and if a pointer was to be stored
to memory, we would have to build up the pointer vector with insertelement
instructions.
With this patch, we will vectorize all GEPs that haven't already been marked
for scalarization.
The patch refines collectLoopScalars to more exactly identify the scalar GEPs.
The function now more closely resembles collectLoopUniforms. And the patch
moves vector GEP creation out of vectorizeMemoryInstruction and into the main
vectorization loop. The vector GEPs needed for gather and scatter operations
will have already been generated before vectoring the memory accesses.
Original Differential Revision: https://reviews.llvm.org/D30710
llvm-svn: 298735
This patch adds support for vectorizing GEPs. Previously, we only generated
vector GEPs on-demand when creating gather or scatter operations. All GEPs from
the original loop were scalarized by default, and if a pointer was to be stored
to memory, we would have to build up the pointer vector with insertelement
instructions.
With this patch, we will vectorize all GEPs that haven't already been marked
for scalarization.
The patch refines collectLoopScalars to more exactly identify the scalar GEPs.
The function now more closely resembles collectLoopUniforms. And the patch
moves vector GEP creation out of vectorizeMemoryInstruction and into the main
vectorization loop. The vector GEPs needed for gather and scatter operations
will have already been generated before vectoring the memory accesses.
Differential Revision: https://reviews.llvm.org/D30710
llvm-svn: 298620
The code for generating scalar base pointers in vectorizeMemoryInstruction is
not needed. We currently scalarize all GEPs and maintain the scalarized values
in VectorLoopValueMap. The GEP cloning in this unneeded code is the same as
that in scalarizeInstruction. The test cases that changed as a result of this
patch changed because we were able to reuse the scalarized GEP that we
previously generated instead of cloning a new one.
Differential Revision: https://reviews.llvm.org/D30587
llvm-svn: 298615
This patch refactors the PHisToFix loop as follows:
- The loop itself now resides in its own method.
- The new method iterates on scalar-loop's header; the PHIsToFix map formerly
propagated as an output parameter and filled during phi widening is removed.
- The code handling reductions is moved into its own method, similar to the
existing fixFirstOrderRecurrence().
Differential Revision: https://reviews.llvm.org/D30755
llvm-svn: 297740
Refactoring Cost Model's selectVectorizationFactor() so that it handles only the
selection of the best VF from a pre-computed range of candidate VF's, extracting
early-exit criteria and the computation of a MaxVF upper-bound to other methods,
all driven by a newly introduced LoopVectorizationPlanner.
Differential Revision: https://reviews.llvm.org/D30653
llvm-svn: 297737
getIntrinsicInstrCost() used to only compute scalarization cost based on types.
This patch improves this so that the actual arguments are checked when they are
available, in order to handle only unique non-constant operands.
Tests updates:
Analysis/CostModel/X86/arith-fp.ll
Transforms/LoopVectorize/AArch64/interleaved_cost.ll
Transforms/LoopVectorize/ARM/interleaved_cost.ll
The improvement in getOperandsScalarizationOverhead() to differentiate on
constants made it necessary to update the interleaved_cost.ll tests even
though they do not relate to intrinsics.
Review: Hal Finkel
https://reviews.llvm.org/D29540
llvm-svn: 297705
This commit is a follow-up on r297580. It fixes the FIXME added temporarily
by that commit to keep the removal of Unroller's specialized version of
scalarizeInstruction() an NFC. See https://reviews.llvm.org/D30715 for details.
llvm-svn: 297610
Unroller's specialized scalarizeInstruction() is mostly duplicating Vectorizer's
variant. OTOH Vectorizer's scalarizeInstruction() already supports the special
case of VF==1 except for avoiding mask-bit extraction in that case. This patch
removes Unroller's specialized version in favor of a unified method.
The only functional difference between the two variants seems to be setting
memcheck metadata for loads and stores only in Vectorizer's variant, which is a
bug in Unroller. To keep this patch an NFC the unified method doesn't set
memcheck metadata for VF==1.
Differential Revision: https://reviews.llvm.org/D30715
llvm-svn: 297580
This reverts r293386, r294027, r294029 and r296411.
Turns out the SLP tree isn't actually a "tree" and we don't handle
accessing the same packet of loads in several different orders well,
causing miscompiles.
Revert until we can fix this properly.
llvm-svn: 297493
Summary:
Similar to SmallPtrSet, this makes find and count work with both const
referneces and const pointers.
Reviewers: dblaikie
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D30713
llvm-svn: 297424
Analyzing larger trees is extremely difficult with the current debug output so
this adds GraphTraits and DOTGraphTraits on top of the VectorizableTree data
structure. We can now display the SLP trees with Graphviz as in
https://reviews.llvm.org/F3132765.
I decorated the graph where a value needs to be gathered for one reason or
another. These are the red nodes.
There are other improvement I am planning to make as I work through my case
here. For example, I would also like to mark nodes that need to be extracted.
Differential Revision: https://reviews.llvm.org/D30731
llvm-svn: 297303
Because IRBuilder performs constant-folding, it's not guaranteed that an
instruction in the original loop map to an instruction in the vector loop. It
could map to a constant vector instead. The handling of first-order recurrences
was incorrectly making this assumption when setting the IRBuilder's insert
point.
llvm-svn: 297302
When expanding the set of uniform instructions beyond the seed instructions
(e.g., consecutive pointers), we mark a new instruction uniform if all its
loop-varying users are uniform. We should also allow users that are consecutive
or interleaved memory accesses. This fixes cases where we have an instruction
that is used as the pointer operand of a consecutive access but also used by a
non-memory instruction that later becomes uniform as part of the expansion.
llvm-svn: 297179
for VectorizeTree() API.This API uses it for proper mask computation to be used in shufflevector IR.
The fix is to compute the mask for out of order memory accesses while building the vectorizable tree
instead of actual vectorization of vectorizable tree.It also needs to recompute the proper Lane for
external use of vectorizable scalars based on shuffle mask.
Reviewers: mkuper
Differential Revision: https://reviews.llvm.org/D30159
Change-Id: Ide8773ce0ad3562f3cf4d1a0ad0f487e2f60ce5d
llvm-svn: 296863
When computing the smallest and largest types for selecting the maximum
vectorization factor, we currently ignore loads and stores of pointer types if
the memory access is non-consecutive. We do this because such accesses must be
scalarized regardless of vectorization factor, and thus shouldn't be considered
when determining the factor. This patch makes this check less aggressive by
also considering non-consecutive accesses that may be vectorized, such as
interleaved accesses. Because we don't know at the time of the check if an
accesses will certainly be vectorized (this is a cost model decision given a
particular VF), we consider all accesses that can potentially be vectorized.
Differential Revision: https://reviews.llvm.org/D30305
llvm-svn: 296747
Summary:
The SLP vectorizer should propagate IR-level optimization hints/flags
(nsw, nuw, exact, fast-math) when converting scalar horizontal
reductions instructions into vectors, just like for other vectorized
instructions.
It doe not include IR propagation for extra arguments, we need to handle
original scalar operations for extra args to propagate correct flags.
Reviewers: mkuper, mzolotukhin, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30418
llvm-svn: 296614
Summary:
We should preserve IR flags for extra args. These IR flags should be
taken from original scalar operations, not from the reduction
operations.
Reviewers: mkuper, mzolotukhin, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30447
llvm-svn: 296613
Summary:
If horizontal reduction tree starts from the binary operation that is
used in PHI node, but this PHI is not used in horizontal reduction, we
may end up with extra addition of this PHI node after vectorization.
Here is an example:
```
%phi = phi i32 [ %tmp, %end], ...
...
%tmp = add i32 %tmp1, %tmp2
end:
```
after vectorization we always have something like:
```
%phi = phi i32 [ %tmp, %end], ...
...
%red = extractelement <8 x 32> %vec.red, 0
%tmp = add i32 %red, %phi
end:
```
even if `%phi` is not used in reduction tree. Patch considers these PHI
nodes as extra arguments and considers them in the final result iff they
really used in reduction.
Reviewers: mkuper, hfinkel, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30409
llvm-svn: 296606
The practice in LV is that we emit analysis remarks and then finally report
either a missed or applied remark on the final decision whether vectorization
is taking place. On this code path, we were closing with an analysis remark.
llvm-svn: 296578
for VectorizeTree() API.This API uses it for proper mask computation to be used in shufflevector IR.
The fix is to compute the mask for out of order memory accesses while building the vectorizable tree
instead of actual vectorization of vectorizable tree.
Reviewers: mkuper
Differential Revision: https://reviews.llvm.org/D30159
Change-Id: Id1e287f073fa4959713ba545fa4254db5da8b40d
llvm-svn: 296575
This patch merges the existing floating-point induction variable widening code
into the integer induction variable widening code, creating a single set of
functions for both kinds of inductions. The primary motivation for doing this
is to enable vector phi node creation for floating-point induction variables.
Differential Revision: https://reviews.llvm.org/D30211
llvm-svn: 296145
result
Summary:
If the same value is used several times as an extra value, SLP
vectorizer takes it into account only once instead of actual number of
using.
For example:
```
int val = 1;
for (int y = 0; y < 8; y++) {
for (int x = 0; x < 8; x++) {
val = val + input[y * 8 + x] + 3;
}
}
```
We have 2 extra rguments: `1` - initial value of horizontal reduction
and `3`, which is added 8*8 times to the reduction. Before the patch we
added `1` to the reduction value and added once `3`, though it must be
added 64 times.
Reviewers: mkuper, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30262
llvm-svn: 295972
result
Summary:
If the same value is used several times as an extra value, SLP
vectorizer takes it into account only once instead of actual number of
using.
For example:
```
int val = 1;
for (int y = 0; y < 8; y++) {
for (int x = 0; x < 8; x++) {
val = val + input[y * 8 + x] + 3;
}
}
```
We have 2 extra rguments: `1` - initial value of horizontal reduction
and `3`, which is added 8*8 times to the reduction. Before the patch we
added `1` to the reduction value and added once `3`, though it must be
added 64 times.
Reviewers: mkuper, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30262
llvm-svn: 295956
result
Summary:
If the same value is used several times as an extra value, SLP
vectorizer takes it into account only once instead of actual number of
using.
For example:
```
int val = 1;
for (int y = 0; y < 8; y++) {
for (int x = 0; x < 8; x++) {
val = val + input[y * 8 + x] + 3;
}
}
```
We have 2 extra rguments: `1` - initial value of horizontal reduction
and `3`, which is added 8*8 times to the reduction. Before the patch we
added `1` to the reduction value and added once `3`, though it must be
added 64 times.
Reviewers: mkuper, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30262
llvm-svn: 295949
Implement isLegalToVectorizeLoadChain for AMDGPU to avoid
producing private address spaces accesses that will need to be
split up later. This was doing the wrong thing in the case
where the queried chain was an even number of elements.
A possible <4 x i32> store was being split into
store <2 x i32>
store i32
store i32
rather than
store <2 x i32>
store <2 x i32>
when legal.
llvm-svn: 295933
Summary:
If the same value is used several times as an extra value, SLP
vectorizer takes it into account only once instead of actual number of
using.
For example:
```
int val = 1;
for (int y = 0; y < 8; y++) {
for (int x = 0; x < 8; x++) {
val = val + input[y * 8 + x] + 3;
}
}
```
We have 2 extra rguments: `1` - initial value of horizontal reduction
and `3`, which is added 8*8 times to the reduction. Before the patch we
added `1` to the reduction value and added once `3`, though it must be
added 64 times.
Reviewers: mkuper, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30262
llvm-svn: 295868
Prevent memory objects of different address spaces to be part of
the same load/store groups when analysing interleaved accesses.
This is fixing pr31900.
Reviewers: HaoLiu, mssimpso, mkuper
Reviewed By: mssimpso, mkuper
Subscribers: llvm-commits, efriedma, mzolotukhin
Differential Revision: https://reviews.llvm.org/D29717
This reverts r295042 (re-applies r295038) with an additional fix for the
buildbot problem.
llvm-svn: 295858
