Summary:
This isn't supported directly so we rotate the vector by the desired number of
elements, insert to element zero, then rotate back.
The i64 case generates rather poor code on MIPS32. There is an obvious
optimisation to be made in future (do both insert.w's inside a shared
rotate/unrotate sequence) but for now it's sufficient to select valid code
instead of aborting.
Depends on D3536
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3537
llvm-svn: 207640
Summary:
This isn't supported directly so we splat the vector element and extract
the most convenient copy.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3530
llvm-svn: 207524
Summary:
VECTOR_SHUFFLE concatenates the vectors in an vectorwise fashion.
<0b00, 0b01> + <0b10, 0b11> -> <0b00, 0b01, 0b10, 0b11>
VSHF concatenates the vectors in a bitwise fashion:
<0b00, 0b01> + <0b10, 0b11> ->
0b0100 + 0b1110 -> 0b01001110
<0b10, 0b11, 0b00, 0b01>
We must therefore swap the operands to get the correct result.
The test case that discovered the issue was MultiSource/Benchmarks/nbench.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3142
llvm-svn: 204480
Summary:
Correct the match patterns and the lowerings that made the CodeGen tests pass despite the mistakes.
The original testcase that discovered the problem was SingleSource/UnitTests/SignlessType/factor.c in test-suite.
During review, we also found that some of the existing CodeGen tests were incorrect and fixed them:
* bitwise.ll: In bsel_v16i8 the IfSet/IfClear were reversed because bsel and bmnz have different operand orders and the test didn't correctly account for this. bmnz goes 'IfClear, IfSet, CondMask', while bsel goes 'CondMask, IfClear, IfSet'.
* vec.ll: In the cases where a bsel is emitted as a bmnz (they are the same operation with a different input tied to the result) the operands were in the wrong order.
* compare.ll and compare_float.ll: The bsel operand order was correct for a greater-than comparison, but a greater-than comparison instruction doesn't exist. Lowering this operation inverts the condition so the IfSet/IfClear need to be swapped to match.
The differences between BSEL, BMNZ, and BMZ and how they map to/from vselect are rather confusing. I've therefore added a note to MSA.txt to explain this in a single place in addition to the comments that explain each case.
Reviewers: matheusalmeida, jacksprat
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3028
llvm-svn: 203657
Summary:
Previously, attempting to extract lanes 2 and 3 would actually extract lane 1.
The MSA CodeGen tests only covered lanes 0 and 1.
Differential Revision: http://llvm-reviews.chandlerc.com/D2935
llvm-svn: 202848
Summary:
Parts of the compiler still believed MSA load/stores have a 16-bit offset when
it is actually 10-bit. Corrected this, and fixed a closely related issue this
uncovered where load/stores with 10-bit and 12-bit offsets (MSA and microMIPS
respectively) could not load/store using offsets from the stack/frame pointer.
They accepted frameindex+offset, but not frameindex by itself.
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2888
llvm-svn: 202717
This patch teaches the DAGCombiner how to fold a sext/aext/zext dag node when
the operand in input is a build vector of constants (or UNDEFs).
The inability to fold a sext/zext of a constant build_vector was the root
cause of some pcg bugs affecting vselect expansion on x86-64 with AVX support.
Before this change, the DAGCombiner only knew how to fold a sext/zext/aext of a
ConstantSDNode.
llvm-svn: 200234
Summary:
$rs and $rt were the wrong way round in the .td and the testcase wasn't
strict enough to detect the mistake.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2554
llvm-svn: 199498
Summary:
The MSA ld.[bhwd] and st.[bhwd] instructions scale the immediate by the
element size before use as an offset. The offset must therefore be a
multiple of the element size to be valid in these instructions. However,
an unaligned base address is valid in MSA.
This commit causes the compiler to emit valid code when the calculated
offset is not a multiple of the element size by accounting for the offset
using addiu and using a zero offset in the load/store.
Depends on D2338
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2339
llvm-svn: 196777
Summary:
The immediate in these instructions is scaled before use as an offset.
They therefore have a wider reach than ld.b/st.b.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2338
llvm-svn: 196775
This prevents the compiler from emitting invalid ld.[bhwd]'s and st.[bhwd]'s
when the stack frame is between 512 and 32,768 bytes in size.
llvm-svn: 195973
Summary:
Moved the requirement for SelectionDAG::getConstant() to return legally
typed nodes slightly earlier. There were two optional DAGCombine passes
that were missed out and were required to produce type-legal DAGs.
Simplified a code-path in tryFoldToZero() to use SelectionDAG::getConstant().
This provides support for both promoted and expanded vector types whereas the
previous code only supported promoted vector types.
Fixes a "Type for zero vector elements is not legal" assertion detected by
an llvm-stress generated test.
Reviewers: resistor
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2251
llvm-svn: 195635
Mask == ~InvMask asserts if the width of Mask and InvMask differ.
The combine isn't valid (with two exceptions, see below) if the widths differ
so test for this before testing Mask == ~InvMask.
In the specific cases of Mask=~0 and InvMask=0, as well as Mask=0 and
InvMask=~0, the combine is still valid. However, there are more appropriate
combines that could be used in these cases such as folding x & 0 to 0, or
x & ~0 to x.
llvm-svn: 195364
Summary:
LegalizeSetCCCondCode can now legalize SETEQ and SETNE by returning the inverse
condition and requesting that the caller invert the result of the condition.
The caller of LegalizeSetCCCondCode must handle the inverted CC, and they do
so as follows:
SETCC, BR_CC:
Invert the result of the SETCC with SelectionDAG::getNOT()
SELECT_CC:
Swap the true/false operands.
This is necessary for MSA which lacks an integer SETNE instruction.
Reviewers: resistor
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2229
llvm-svn: 195355
Now that FileCheck supports multiple check prefixes, we don't need to keep the
little and big endian versions of this test separate anymore. Merge them back
together.
llvm-svn: 194826
Summary:
When getConstant() is called for an expanded vector type, it is split into
multiple scalar constants which are then combined using appropriate build_vector
and bitcast operations.
In addition to the usual big/little endian differences, the case where the
element-order of the vector does not have the same endianness as the elements
themselves is also accounted for. For example, for v4i32 on big-endian MIPS,
the byte-order of the vector is <3210,7654,BA98,FEDC>. For little-endian, it is
<0123,4567,89AB,CDEF>.
Handling this case turns out to be a nop since getConstant() returns a splatted
vector (so reversing the element order doesn't change the value)
This fixes a number of cases in MIPS MSA where calling getConstant() during
operation legalization introduces illegal types (e.g. to legalize v2i64 UNDEF
into a v2i64 BUILD_VECTOR of illegal i64 zeros). It should also handle bigger
differences between illegal and legal types such as legalizing v2i64 into v8i16.
lowerMSASplatImm() in the MIPS backend no longer needs to avoid calling
getConstant() so this function has been updated in the same patch.
For the sake of transparency, the steps I've taken since the review are:
* Added 'virtual' to isVectorEltOrderLittleEndian() as requested. This revealed
that the MIPS tests were falsely passing because a polymorphic function was
not actually polymorphic in the reviewed patch.
* Fixed the tests that were now failing. This involved deleting the code to
handle the MIPS MSA element-order (which was previously doing an byte-order
swap instead of an element-order swap). This left
isVectorEltOrderLittleEndian() unused and it was deleted.
* Fixed build failures caused by rebasing beyond r194467-r194472. These build
failures involved the bset, bneg, and bclr instructions added in these commits
using lowerMSASplatImm() in a way that was no longer valid after this patch.
Some of these were fixed by calling SelectionDAG::getConstant() instead,
others were fixed by a new function getBuildVectorSplat() that provided the
removed functionality of lowerMSASplatImm() in a more sensible way.
Reviewers: bkramer
Reviewed By: bkramer
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1973
llvm-svn: 194811
Summary:
This patch (correctly) breaks some MSA tests by exposing the cases when
SelectionDAG::getConstant() produces illegal types. These have been temporarily
marked XFAIL and the XFAIL flag will be removed when
SelectionDAG::getConstant() is fixed.
There are three categories of failure:
* Immediate instructions are not selected in one endian mode.
* Immediates used in ldi.[bhwd] must be different according to endianness.
(this only affects cases where the 'wrong' ldi is used to load the correct
bitpattern. E.g. (bitcast:v2i64 (build_vector:v4i32 ...)))
* Non-immediate instructions that rely on immediates affected by the
previous two categories as part of their match pattern.
For example, the bset match pattern is the vector equivalent of
'ws | (1 << wt)'.
One test needed correcting to expect different output depending on whether big
or little endian was in use. This test was
test/CodeGen/Mips/msa/basic_operations.ll and experiences the second category
of failure shown above. The little endian version of this test is named
basic_operations_little.ll and will be merged back into basic_operations.ll in
a follow up commit now that FileCheck supports multiple check prefixes.
Reviewers: bkramer, jacksprat, dsanders
Reviewed By: dsanders
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1972
llvm-svn: 194806
Like GCC, this re-uses the 'f' constraint and a new 'w' print-modifier:
asm ("ldi.w %w0, 1", "=f"(result));
Unlike GCC, the 'w' print-modifer is not _required_ to produce the intended
output. This is a consequence of differences in the internal handling of
the registers in each compiler. To be source-compatible between the
compilers, users must use the 'w' print-modifier.
MSA registers (including control registers) are supported in clobber lists.
llvm-svn: 194476
Upcoming commit(s) are going to add support for bseti and bnegi. This would
cause some existing tests to (correctly) change behaviour and emit a different
instruction. This patch prevents this by changing the constant used in ori and
xori tests so that they will not be matchable by the bseti and bnegi patterns
when these instructions are matchable from normal IR.
llvm-svn: 194467
Also corrected the definition of the intrinsics for these instructions (the
result register is also the first operand), and added intrinsics for bsel and
bseli to clang (they already existed in the backend).
These four operations are mostly equivalent to bsel, and bseli (the difference
is which operand is tied to the result). As a result some of the tests changed
as described below.
bitwise.ll:
- bsel.v test adapted so that the mask is unknown at compile-time. This stops
it emitting bmnzi.b instead of the intended bsel.v.
- The bseli.b test now tests the right thing. Namely the case when one of the
values is an uimm8, rather than when the condition is a uimm8 (which is
covered by bmnzi.b)
compare.ll:
- bsel.v tests now (correctly) emits bmnz.v instead of bsel.v because this
is the same operation (see MSA.txt).
i8.ll
- CHECK-DAG-ized test.
- bmzi.b test now (correctly) emits equivalent bmnzi.b with swapped operands
because this is the same operation (see MSA.txt).
- bseli.b still emits bseli.b though because the immediate makes it
distinguishable from bmnzi.b.
vec.ll:
- CHECK-DAG-ized test.
- bmz.v tests now (correctly) emits bmnz.v with swapped operands (see
MSA.txt).
- bsel.v tests now (correctly) emits bmnz.v with swapped operands (see
MSA.txt).
llvm-svn: 193693
This required correcting the definition of the bins[lr]i intrinsics because
the result is also the first operand.
It also required removing the (arbitrary) check for 32-bit immediates in
MipsSEDAGToDAGISel::selectVSplat().
Currently using binsli.d with 2 bits set in the mask doesn't select binsli.d
because the constant is legalized into a ConstantPool. Similar things can
happen with binsri.d with more than 10 bits set in the mask. The resulting
code when this happens is correct but not optimal.
llvm-svn: 193687
(or (and $a, $mask), (and $b, $inverse_mask)) => (vselect $mask, $a, $b).
where $mask is a constant splat. This allows bitwise operations to make use
of bsel.
It's also a stepping stone towards matching bins[lr], and bins[lr]i from
normal IR.
Two sets of similar tests have been added in this commit. The bsel_* functions
test the case where binsri cannot be used. The binsr_*_i functions will
start to use the binsri instruction in the next commit.
llvm-svn: 193682
splat.d is implemented but this subtest is currently disabled. This is because
it is difficult to match the appropriate IR on MIPS32. There is a patch under
review that should help with this so I hope to enable the subtest soon.
llvm-svn: 193680
