Add a verifier check that `DILocalVariable`s of tag
`DW_TAG_arg_variable` always have a non-zero 'arg:' field, and those of
tag `DW_TAG_auto_variable` always have a zero 'arg:' field. These are
the only configurations that are properly understood by the backend.
(Also, fix the bad examples in LangRef and test/Assembler, and fix the
bug in Kaleidoscope Ch8.)
A large number of testcases seem to have bitrotted their way forward
from some ancient version of the debug info hierarchy that didn't have
`arg:` parameters. If you have out-of-tree testcases that start failing
in the verifier and you don't care enough to get the `arg:` right, you
may have some luck just calling:
sed -e 's/, arg: 0/, arg: 1/'
or some such, but I hand-updated the ones in tree.
llvm-svn: 243183
In particular, it's much easier to read, as it doesn't expand all
the way on wide-screen displays.
CSS committed under LLVM license with explicit permission from
Daniel Bünzli <daniel.buenzli@erratique.ch>.
llvm-svn: 242511
This adds new intrinsics "*absdiff" for absolute difference ops to facilitate efficient code generation for "sum of absolute differences" operation.
The patch also contains the introduction of corresponding SDNodes and basic legalization support.Sanity of the generated code is tested on X86.
This is 1st of the three patches.
Patch by Shahid Asghar-ahmad!
llvm-svn: 242409
We used to take the address specified as the direct target of the patchpoint
and did no TOC-pointer handling. This, however, as not all that useful,
because MCJIT tends to create a lot of modules, and they have their own TOC
sections. Thus, to call from the generated code to other generated code, you
really need to switch TOC pointers. Make this work as expected, and under
ELFv1, tread the address as the function descriptor address so that the correct
TOC pointer can be loaded.
llvm-svn: 242217
It exists for compatibility with GCC which requires it to print MSA registers
for the 'f' constraint. Although LLVM doesn't need it, the 'w' modifier should
still be used for portability between the two compilers.
llvm-svn: 242015
This change adds new attribute called "argmemonly". Function marked with this attribute can only access memory through it's argument pointers. This attribute directly corresponds to the "OnlyAccessesArgumentPointees" ModRef behaviour in alias analysis.
Differential Revision: http://reviews.llvm.org/D10398
llvm-svn: 241979
This is used the canonicalize floating point values, which is useful for
implementing certain numeric primitives. See the LangRef changes for
the full details of its semantics.
llvm-svn: 241977
FCmp behaves a lot like a floating-point binary operator in many ways,
and can benefit from fast-math information. Flags such as nsz and nnan
can affect if this fcmp (in combination with a select) can be treated
as a fminnum/fmaxnum operation.
This adds backwards-compatible bitcode support, IR parsing and writing,
LangRef changes and IRBuilder changes. I'll need to audit InstSimplify
and InstCombine in a followup to find places where flags should be
copied.
llvm-svn: 241901
Summary:
This introduces new instructions neccessary to implement MSVC-compatible
exception handling support. Most of the middle-end and none of the
back-end haven't been audited or updated to take them into account.
Reviewers: rnk, JosephTremoulet, reames, nlewycky, rjmccall
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11041
llvm-svn: 241888
The justification of this change is here: http://lists.cs.uiuc.edu/pipermail/llvmdev/2015-March/082989.html
According to the current GEP syntax, vector GEP requires that each index must be a vector with the same number of elements.
%A = getelementptr i8, <4 x i8*> %ptrs, <4 x i64> %offsets
In this implementation I let each index be or vector or scalar. All vector indices must have the same number of elements. The scalar value will mean the splat vector value.
(1) %A = getelementptr i8, i8* %ptr, <4 x i64> %offsets
or
(2) %A = getelementptr i8, <4 x i8*> %ptrs, i64 %offset
In all cases the %A type is <4 x i8*>
In the case (2) we add the same offset to all pointers.
The case (1) covers C[B[i]] case, when we have the same base C and different offsets B[i].
The documentation is updated.
http://reviews.llvm.org/D10496
llvm-svn: 241788
While trying to figure out how this was all supposed to work, I
figured I'd start writing down some documentation, since it was
basically completely missing.
Differential Revision: http://reviews.llvm.org/D10816
llvm-svn: 241698
Summary:
Initially, these intrinsics seemed like part of a family of "frame"
related intrinsics, but now I think that's more confusing than helpful.
Initially, the LangRef specified that this would create a new kind of
allocation that would be allocated at a fixed offset from the frame
pointer (EBP/RBP). We ended up dropping that design, and leaving the
stack frame layout alone.
These intrinsics are really about sharing local stack allocations, not
frame pointers. I intend to go further and add an `llvm.localaddress()`
intrinsic that returns whatever register (EBP, ESI, ESP, RBX) is being
used to address locals, which should not be confused with the frame
pointer.
Naming suggestions at this point are welcome, I'm happy to re-run sed.
Reviewers: majnemer, nicholas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11011
llvm-svn: 241633
Summary: Download should be over https, not insecure ftp at least for the signature and key files. The signature should also get verified.
Test Plan: None
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10845
llvm-svn: 241138
Summary:
This change introduces a !make.implicit metadata that allows the
frontend to pre-select the set of explicit null checks that will be
considered for transformation into implicit null checks.
The reason for not using profiling data instead of !make.implicit is
explained in the change to `FaultMaps.rst`.
Reviewers: atrick, reames, pgavlin, JosephTremoulet
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10824
llvm-svn: 241116
It is mandatory to specify a comdat in order to receive comdat semantics
for a symbol. We were previously getting this wrong in -function-sections
mode; linker-weak symbols were being emitted in a selectany comdat. This
change causes such symbols to use a noduplicates comdat instead, fixing
the inconsistency.
Also correct an inaccuracy in the docs.
Differential Revision: http://reviews.llvm.org/D10828
llvm-svn: 241103
This will allow classes to implement the AA interface without deriving
from the class or referencing an internal enum of some other class as
their return types.
Also, to a pretty fundamental extent, concepts such as 'NoAlias',
'MayAlias', and 'MustAlias' are first class concepts in LLVM and we
aren't saving anything by scoping them heavily.
My mild preference would have been to use a scoped enum, but that
feature is essentially completely broken AFAICT. I'm extremely
disappointed. For example, we cannot through any reasonable[1] means
construct an enum class (or analog) which has scoped names but converts
to a boolean in order to test for the possibility of aliasing.
[1]: Richard Smith came up with a "solution", but it requires class
templates, and lots of boilerplate setting up the enumeration multiple
times. Something like Boost.PP could potentially bundle this up, but
even that would be quite painful and it doesn't seem realistically worth
it. The enum class solution would probably work without the need for
a bool conversion.
Differential Revision: http://reviews.llvm.org/D10495
llvm-svn: 240255
The personality routine currently lives in the LandingPadInst.
This isn't desirable because:
- All LandingPadInsts in the same function must have the same
personality routine. This means that each LandingPadInst beyond the
first has an operand which produces no additional information.
- There is ongoing work to introduce EH IR constructs other than
LandingPadInst. Moving the personality routine off of any one
particular Instruction and onto the parent function seems a lot better
than have N different places a personality function can sneak onto an
exceptional function.
Differential Revision: http://reviews.llvm.org/D10429
llvm-svn: 239940
This patch adds the safe stack instrumentation pass to LLVM, which separates
the program stack into a safe stack, which stores return addresses, register
spills, and local variables that are statically verified to be accessed
in a safe way, and the unsafe stack, which stores everything else. Such
separation makes it much harder for an attacker to corrupt objects on the
safe stack, including function pointers stored in spilled registers and
return addresses. You can find more information about the safe stack, as
well as other parts of or control-flow hijack protection technique in our
OSDI paper on code-pointer integrity (http://dslab.epfl.ch/pubs/cpi.pdf)
and our project website (http://levee.epfl.ch).
The overhead of our implementation of the safe stack is very close to zero
(0.01% on the Phoronix benchmarks). This is lower than the overhead of
stack cookies, which are supported by LLVM and are commonly used today,
yet the security guarantees of the safe stack are strictly stronger than
stack cookies. In some cases, the safe stack improves performance due to
better cache locality.
Our current implementation of the safe stack is stable and robust, we
used it to recompile multiple projects on Linux including Chromium, and
we also recompiled the entire FreeBSD user-space system and more than 100
packages. We ran unit tests on the FreeBSD system and many of the packages
and observed no errors caused by the safe stack. The safe stack is also fully
binary compatible with non-instrumented code and can be applied to parts of
a program selectively.
This patch is our implementation of the safe stack on top of LLVM. The
patches make the following changes:
- Add the safestack function attribute, similar to the ssp, sspstrong and
sspreq attributes.
- Add the SafeStack instrumentation pass that applies the safe stack to all
functions that have the safestack attribute. This pass moves all unsafe local
variables to the unsafe stack with a separate stack pointer, whereas all
safe variables remain on the regular stack that is managed by LLVM as usual.
- Invoke the pass as the last stage before code generation (at the same time
the existing cookie-based stack protector pass is invoked).
- Add unit tests for the safe stack.
Original patch by Volodymyr Kuznetsov and others at the Dependable Systems
Lab at EPFL; updates and upstreaming by myself.
Differential Revision: http://reviews.llvm.org/D6094
llvm-svn: 239761
Summary:
This instruction encodes a loading operation that may fault, and a label
to branch to if the load page-faults. The locations of potentially
faulting loads and their "handler" destinations are recorded in a
FaultMap section, meant to be consumed by LLVM's clients.
Nothing generates FAULTING_LOAD_OP instructions yet, but they will be
used in a future change.
The documentation (FaultMaps.rst) needs improvement and I will update
this diff with a more expanded version shortly.
Depends on D10196
Reviewers: rnk, reames, AndyAyers, ab, atrick, pgavlin
Reviewed By: atrick, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10197
llvm-svn: 239740
- Add glc, slc, and tfe operands to flat instructions
- Add missing flat instructions
- Fix the encoding of flat_load_dwordx3 and flat_store_dwordx3.
llvm-svn: 239637
If the first character in a metadata attachment's name is a digit, it has
to be output using an escape sequence, otherwise it's not valid text IR.
Removed an over-zealous assert from LLVMContext which didn't allow this.
The rule should only apply to text IR. Actual names can have any sequence
of non-NUL bytes.
Also added some documentation on accepted names.
Bug found with AFL fuzz.
llvm-svn: 238867
Summary:
These intrinsics should take a generic input address space and outputs a
non-generic address space.
Test Plan: no
Reviewers: jholewinski, eliben
Reviewed By: eliben
Subscribers: eliben, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D10132
llvm-svn: 238620
Summary:
We would wrap flow mappings and sequences when they go over a hardcoded 70
characters limit. Make the wrapping column configurable (and default to 70
co the change should be NFC for current users). Passing 0 allows to completely
suppress the wrapping which makes it easier to handle in tools like FileCheck.
Reviewers: bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10109
llvm-svn: 238584
Summary:
Introduce dereferenceable, dereferenceable_or_null metadata for loads
with the same semantic as corresponding attributes.
This patch depends on http://reviews.llvm.org/D9253
Patch by Artur Pilipenko!
Reviewers: hfinkel, sanjoy, reames
Reviewed By: sanjoy, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9365
llvm-svn: 237720
This commit gives the users of the YAML Traits I/O library
the ability to serialize scalars using the YAML literal block
scalar notation by allowing them to implement a specialization
of the `BlockScalarTraits` struct for their custom types.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9613
llvm-svn: 237404
Summary:
This patch teaches the PlaceSafepoints pass about two `CallSite`
function attributes:
* "statepoint-id": if the string value of this attribute can be parsed
as an integer, then it is propagated to the ID parameter of the
statepoint created.
* "statepoint-num-patch-bytes": if the string value of this attribute
can be parsed as an integer, then it is propagated to the `num patch
bytes` parameter of the statepoint created.
This change intentionally does not assert on a malformed value for these
attributes, given that they're not "official" attributes.
Reviewers: reames, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9735
llvm-svn: 237286
Summary:
This adds three Function methods to handle function entry counts:
setEntryCount() and getEntryCount().
Entry counts are stored under the MD_prof metadata node with the name
"function_entry_count". They are unsigned 64 bit values set by profilers
(instrumentation and sample profiler changes coming up).
Added documentation for new profile metadata and tests.
Reviewers: dexonsmith, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9628
llvm-svn: 237260
Summary:
This change adds two new parameters to the statepoint intrinsic, `i64 id`
and `i32 num_patch_bytes`. `id` gets propagated to the ID field
in the generated StackMap section. If the `num_patch_bytes` is
non-zero then the statepoint is lowered to `num_patch_bytes` bytes of
nops instead of a call (the spill and reload code remains unchanged).
A non-zero `num_patch_bytes` is useful in situations where a language
runtime requires complete control over how a call is lowered.
This change brings statepoints one step closer to patchpoints. With
some additional work (that is not part of this patch) it should be
possible to get rid of `TargetOpcode::STATEPOINT` altogether.
PlaceSafepoints generates `statepoint` wrappers with `id` set to
`0xABCDEF00` (the old default value for the ID reported in the stackmap)
and `num_patch_bytes` set to `0`. This can be made more sophisticated
later.
Reviewers: reames, pgavlin, swaroop.sridhar, AndyAyers
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9546
llvm-svn: 237214
Summary:
As far as I understand the entire point of this example is to show that
if noalias is not a superset/equal to the alias.scope list on a scope
domain then load could reference locations that the store is not known
to not-alias i.e may alias.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9598
llvm-svn: 236977
This changes the shape of the statepoint intrinsic from:
@llvm.experimental.gc.statepoint(anyptr target, i32 # call args, i32 unused, ...call args, i32 # deopt args, ...deopt args, ...gc args)
to:
@llvm.experimental.gc.statepoint(anyptr target, i32 # call args, i32 flags, ...call args, i32 # transition args, ...transition args, i32 # deopt args, ...deopt args, ...gc args)
This extension offers the backend the opportunity to insert (somewhat) arbitrary code to manage the transition from GC-aware code to code that is not GC-aware and back.
In order to support the injection of transition code, this extension wraps the STATEPOINT ISD node generated by the usual lowering lowering with two additional nodes: GC_TRANSITION_START and GC_TRANSITION_END. The transition arguments that were passed passed to the intrinsic (if any) are lowered and provided as operands to these nodes and may be used by the backend during code generation.
Eventually, the lowering of the GC_TRANSITION_{START,END} nodes should be informed by the GC strategy in use for the function containing the intrinsic call; for now, these nodes are instead replaced with no-ops.
Differential Revision: http://reviews.llvm.org/D9501
llvm-svn: 236888
These changes allow usages where you want to pass an additional
commandline option to all invocations of a specific llvm tool. Example:
> llvm-lit -Dllc=llc -enable-misched -verify-machineinstrs
Differential Revision: http://reviews.llvm.org/D9487
llvm-svn: 236461
This patch adds an optional 'flow' field to the MappingTrait
class so that yaml IO will be able to output flow mappings.
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9450
llvm-svn: 236456
This patch adds the missing context parameter to the
input and output methods in ScalarTraits.
Differential Revision: http://reviews.llvm.org/D9173
llvm-svn: 236328
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
llvm-svn: 236120
1) Turns out we're not great at recognizing redundant checks when one is a != and the other is an ==. This is a bug, but it's one that matters to frontend authors.
2) Frontends shouldn't use intrinsics unless strictly neccessary. This has been pretty widely proven by this point and is good to document.
llvm-svn: 235825
This has been bit-rotting, so fix it up. I'll have to edit this again
once the MD* classes have been renamed to DI* -- I'll try to remember to
do that with the commit that renames them.
llvm-svn: 235244
Just above, 'op2' is stated to be unsigned, so 'negative' doesn't make
sense (and is handled by "larger than" anyway). The descriptions for
lshr and ashr don't say 'negative or' either.
llvm-svn: 235230
Summary:
If a pointer is marked as dereferenceable_or_null(N), LLVM assumes it
is either `null` or `dereferenceable(N)` or both. This change only
introduces the attribute and adds a token test case for the `llvm-as`
/ `llvm-dis`. It does not hook up other parts of the optimizer to
actually exploit the attribute -- those changes will come later.
For pointers in address space 0, `dereferenceable(N)` is now exactly
equivalent to `dereferenceable_or_null(N)` && `nonnull`. For other
address spaces, `dereferenceable(N)` is potentially weaker than
`dereferenceable_or_null(N)` && `nonnull` (since we could have a null
`dereferenceable(N)` pointer).
The motivating case for this change is Java (and other managed
languages), where pointers are either `null` or dereferenceable up to
some usually known-at-compile-time constant offset.
Reviewers: rafael, hfinkel
Reviewed By: hfinkel
Subscribers: nicholas, llvm-commits
Differential Revision: http://reviews.llvm.org/D8650
llvm-svn: 235132
Remove 'inlinedAt:' from MDLocalVariable. Besides saving some memory
(variables with it seem to be single largest `Metadata` contributer to
memory usage right now in -g -flto builds), this stops optimization and
backend passes from having to change local variables.
The 'inlinedAt:' field was used by the backend in two ways:
1. To tell the backend whether and into what a variable was inlined.
2. To create a unique id for each inlined variable.
Instead, rely on the 'inlinedAt:' field of the intrinsic's `!dbg`
attachment, and change the DWARF backend to use a typedef called
`InlinedVariable` which is `std::pair<MDLocalVariable*, MDLocation*>`.
This `DebugLoc` is already passed reliably through the backend (as
verified by r234021).
This commit removes the check from r234021, but I added a new check
(that will survive) in r235048, and changed the `DIBuilder` API in
r235041 to require a `!dbg` attachment whose 'scope:` is in the same
`MDSubprogram` as the variable's.
If this breaks your out-of-tree testcases, perhaps the script I used
(mdlocalvariable-drop-inlinedat.sh) will help; I'll attach it to PR22778
in a moment.
llvm-svn: 235050
Summary:
The document is still incomplete in some degrees, but updated to reflect the
latest changes. Anyway we can detail it if any one think it is not enough. For
the sake of it, some useful examples are listed below:
Refer to r113618 "Add X86 MMX type to bitcode and Type" for how to add a new
type.
> One notable change from then is only one thing that ``lib/VMCore`` is renamed
to ``lib/IR``.
Refer to r194760 "Add addrspacecast instruction" for how to add a new
instruction.
Patch by Chilledheart (rwindz0@gmail.com).
Reviewed By: echristo
Differential Revision: http://reviews.llvm.org/D8897
llvm-svn: 234757
This is currently considered experimental, but most of the more
commonly used instructions should work.
So far only SI has been extensively tested, CI and VI probably work too,
but may be buggy. The current set of tests cases do not give complete
coverage, but I think it is sufficient for an experimental assembler.
See the documentation in R600Usage for more information.
llvm-svn: 234381
This allows the compiler/assembly programmer to switch back to a
section. This in turn fixes the bootstrap failure on powerpc (tested
on gcc110) without changing the ppc codegen at all.
I will try to cleanup the various getELFSection overloads in a followup patch.
Just using a default argument now would lead to ambiguities.
llvm-svn: 234099
We don't need to represent UnwindHelp in IR. Instead, we can use the
knowledge that we are emitting the parent function to decide if we
should create the UnwindHelp stack object.
llvm-svn: 234061
This makes it possible to use the same representation of llvm.eh.actions
in outlined handlers as we use in the parent function because i32's are
just constants that can be copied freely between functions.
I had to add a sentinel alloca to the list of child allocas so that we
don't try to sink the catch object into the handler. Normally, one would
use nullptr for this kind of thing, but TinyPtrVector doesn't support
null elements. More than that, it's elements have to have a suitable
alignment. Therefore, I settled on this for my sentinel:
AllocaInst *getCatchObjectSentinel() {
return static_cast<AllocaInst *>(nullptr) + 1;
}
llvm-svn: 233947
This lets us catch exceptions in simple cases.
N.B. Things that do not work include (but are not limited to):
- Throwing from within a catch handler.
- Catching an object with a named catch parameter.
- 'CatchHigh' is fictitious, we aren't sure of its purpose.
- We aren't entirely efficient with regards to the number of EH states
that we generate.
- IP-to-State tables are sensitive to the order of emission.
llvm-svn: 233767
Summary:
Move lib/Fuzzer docs from a README.txt to a proper .rst file.
This change does not add any content, just formatting.
Test Plan: n/a
Reviewers: samsonov
Reviewed By: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8710
llvm-svn: 233638
We don't have any logic to emit those tables yet, so the SDAG lowering
of this intrinsic is just a stub. We can see the intrinsic in the
prepared IR, though.
llvm-svn: 233354
Summary:
This patch is an attempt at making `DenseMapIterator`s "fail-fast".
Fail-fast iterators that have been invalidated due to insertion into
the host `DenseMap` deterministically trip an assert (in debug mode)
on access, instead of non-deterministically hitting memory corruption
issues.
Enabling fail-fast iterators breaks the LLVM C++ ABI, so they are
predicated on `LLVM_ENABLE_ABI_BREAKING_CHECKS`.
`LLVM_ENABLE_ABI_BREAKING_CHECKS` by default flips with
`LLVM_ENABLE_ASSERTS`, but can be clamped to ON or OFF using the CMake /
autoconf build system.
Reviewers: chandlerc, dexonsmith, rnk, zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8351
llvm-svn: 233310
We don't have any logic to emit those tables yet, so the sdag lowering
of this intrinsic is just a stub. We can see the intrinsic in the
prepared IR, though.
llvm-svn: 233209
Cleanup some bitrot in SourceLevelDebugging.rst.
- Pull the still-relevant details about individual descriptors into
LangRef.rst. Cut a lot of it to avoid over-describing the fields,
as the C++ classes and assembly format are mostly self-describing
now. If there's anything specific that I shouldn't have cut, let me
know and I'll add it back.
- Rewrite the remaining sections to refer to the new debug info
hierarchy in LangRef.rst.
llvm-svn: 232566
After much bike shed discussions, we seem to agree to a few loose
but relevant guidelines on how to prepare a commit message. It also
points the attribution section to the new commit messages section
to deduplicate information.
llvm-svn: 232334
* Moved autotools configure & build example out of "Getting Started Quickly (A Summary)" and into BuildingLLVMWithAutoTools.
* Removed the annotations that CMake is the recommended process and Autotools is alternate.
* Added brief documentation about build targets under "Getting Started Quickly..."
* Added Overview text to BuildingLLVMWithAutotools
* Fixed up a broken link.
llvm-svn: 232278
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
llvm-svn: 232184
Update the doxygen configuration file and Makefile build rules
to provide better output (simply use the default stylesheet and template
from the Doxygen distribution.)
This CL has upgrade doxygen.cfg.in to Doxygen 1.8.6.
llvm-svn: 232064
This CL adds --enable-doxygen-search to enable doxygen search engine
and --enable-doxygen-qt-help to enable the Qt help file generation.
llvm-svn: 232062
These docs *don't* match the way WinEHPrepare uses them yet, and
verifier support isn't implemented either. The implementation will come
after the documentation text is reviewed and agreed upon.
llvm-svn: 232003
Runtime unrolling is an expensive optimization which can bring benefit
only if the loop is hot and iteration number is relatively large enough.
For some loops, we know they are not worth to be runtime unrolled.
The scalar loop from vectorization is one of the cases.
llvm-svn: 231631
These came from my own experience and may not apply equally to all use cases. Any alternate perspective anyone has should be used to refine these.
As always, grammar and spelling adjustments are more than welcome. Please just directly commit a fix if you see something problematic.
llvm-svn: 231352
Here's a rough/first draft - it at least hits the actual textual IR
examples and some of the phrasing. It's probably worth a full pass over,
but I'm not sure how much these docs should reflect the strange
intermediate state we're in anyway.
Totally open to lots of review/feedback/suggestions.
llvm-svn: 231294
Ultimately, __CxxFrameHandler3 needs us to put a stack offset in a
table, and it will take responsibility for copying the exception object
into that slot. Modelling the exception object as an SSA value returned
by begincatch isn't going to work in general, so make it use an output
parameter.
Reviewers: andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D7920
llvm-svn: 231086
Move the specialized metadata nodes for the new debug info hierarchy
into place, finishing off PR22464. I've done bootstraps (and all that)
and I'm confident this commit is NFC as far as DWARF output is
concerned. Let me know if I'm wrong :).
The code changes are fairly mechanical:
- Bumped the "Debug Info Version".
- `DIBuilder` now creates the appropriate subclass of `MDNode`.
- Subclasses of DIDescriptor now expect to hold their "MD"
counterparts (e.g., `DIBasicType` expects `MDBasicType`).
- Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp`
for printing comments.
- Big update to LangRef to describe the nodes in the new hierarchy.
Feel free to make it better.
Testcase changes are enormous. There's an accompanying clang commit on
its way.
If you have out-of-tree debug info testcases, I just broke your build.
- `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to
update all the IR testcases.
- Unfortunately I failed to find way to script the updates to CHECK
lines, so I updated all of these by hand. This was fairly painful,
since the old CHECKs are difficult to reason about. That's one of
the benefits of the new hierarchy.
This work isn't quite finished, BTW. The `DIDescriptor` subclasses are
almost empty wrappers, but not quite: they still have loose casting
checks (see the `RETURN_FROM_RAW()` macro). Once they're completely
gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I
also expect to make a few schema changes now that it's easier to reason
about everything.
llvm-svn: 231082
Patch by Evangelos Foutras:
r220899 started using ocamlfind to build the OCaml bindings but
docs/Makefile still contains references to the OCAMLDOC macro which
is no longer being defined. The result is that OCaml documentation
isn't generated/installed.
llvm-svn: 230850
As mentioned on llvm-dev, this is a new documentation page intended to collect tips for frontend authors on how to generate IR that LLVM is able to optimize well. These types of things come up repeated in review threads and it would be good to have a place to save them.
I added a small handful to start us off, but I mostly want to get the framework in place. Once the docs are here, we can add to them incrementally. If you know of something appropriate for this page, please add it!
Differential Revision: http://reviews.llvm.org/D7890
llvm-svn: 230807
It didn't seem worth leaving behind a guideline to use '= delete' to
make a class uncopyable. That's a well known C++ design pattern.
Reported on the mailing list and in PR22724.
llvm-svn: 230776
When I originally committed the statepoint docs, I left placeholders for example IR fragments. I'm finally getting around to filling those in.
I also added IR fragments to illustrate the usage of the PlaceSafepoints pass while I was at it.
llvm-svn: 230601
Add a brief section linking to the experimental statepoint intrinsics analogous to the one we have linking to patchpoint.
While I'm here, cleanup some wording about what the gc "name" attribute actually means. It's not the name of a *collector* it's the name of the *strategy* which may be compatible with multiple collectors.
llvm-svn: 230576
The builder is based on a layout algorithm that tries to keep members of
small bit sets together. The new layout compresses Chromium's bit sets to
around 15% of their original size.
Differential Revision: http://reviews.llvm.org/D7796
llvm-svn: 230394
In this change:
- Put the getting started section first
- Create a dedicated section to document the built in collector strategies
- Move discuss of ShadowStack into new section
- Add placeholders for erlang, ocaml, and statepoint-example collectors
There will be many more changes following. I plan on full integrating the documentation for gc.statepoint and gc.root. I want to make it much clearer on how to get started and what users should expect in terms of effort.
llvm-svn: 230359
This patch introduces a new mechanism that allows IR modules to co-operatively
build pointer sets corresponding to addresses within a given set of
globals. One particular use case for this is to allow a C++ program to
efficiently verify (at each call site) that a vtable pointer is in the set
of valid vtable pointers for the class or its derived classes. One way of
doing this is for a toolchain component to build, for each class, a bit set
that maps to the memory region allocated for the vtables, such that each 1
bit in the bit set maps to a valid vtable for that class, and lay out the
vtables next to each other, to minimize the total size of the bit sets.
The patch introduces a metadata format for representing pointer sets, an
'@llvm.bitset.test' intrinsic and an LTO lowering pass that lays out the globals
and builds the bitsets, and documents the new feature.
Differential Revision: http://reviews.llvm.org/D7288
llvm-svn: 230054
If the landingpad of the invoke is using a personality function that
catches asynch exceptions, then it can catch a trap.
Also add some landingpads to invalid LLVM IR test cases that lack them.
Over-the-shoulder reviewed by David Majnemer.
llvm-svn: 228782
Summary:
The CMake configuration is explicitely looking for Debug build, all the
other variant disable assertions.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7359
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 228653
Remove handling for DW_TAG_constant. We started producing it in
r110656, but reverted that in r110876 without dropping the support.
Finish the job.
llvm-svn: 228623
This is a refactoring to restructure the single user of performCustomLowering as a specific lowering pass and remove the custom lowering hook entirely.
Before this change, the LowerIntrinsics pass (note to self: rename!) was essentially acting as a pass manager, but without being structured in terms of passes. Instead, it proxied calls to a set of GCStrategies internally. This adds a lot of conceptual complexity (i.e. GCStrategies are stateful!) for very little benefit. Since there's been interest in keeping the ShadowStackGC working, I extracting it's custom lowering pass into a dedicated pass and just added that to the pass order. It will only run for functions which opt-in to that gc.
I wasn't able to find an easy way to preserve the runtime registration of custom lowering functionality. Given that no user of this exists that I'm aware of, I made the choice to just remove that. If someone really cares, we can look at restoring it via dynamic pass registration in the future.
Note that despite the large diff, none of the lowering code actual changes. I added the framing needed to make it a pass and rename the class, but that's it.
Differential Revision: http://reviews.llvm.org/D7218
llvm-svn: 227351
Again, I'd like to emphasize to everyone that this sort of markup change
is *not* what you should be concerned about when writing docs. Focus on
*content*.
I applaud Chandler for focusing on the fantastic content of this new
section!
llvm-svn: 227305
