In general, llvm-symbolizer follows the output style of GNU's addr2line.
However, there are still some differences; in particular, for a requested
address, llvm-symbolizer prints line and column, while addr2line prints
only the line number.
This patch adds a new switch to select the preferred style.
Differential Revision: https://reviews.llvm.org/D60190
llvm-svn: 357675
[Symbolizer] Add getModuleSectionIndexForAddress() helper routine
The https://reviews.llvm.org/D58194 patch changed symbolizer interface.
Particularily it requires not only Address but SectionIndex also.
Note object::SectionedAddress parameter:
Expected<DILineInfo> symbolizeCode(const std::string &ModuleName,
object::SectionedAddress ModuleOffset,
StringRef DWPName = "");
There are callers of symbolizer which do not know particular section index.
That patch creates getModuleSectionIndexForAddress() routine which
will detect section index for the specified address. Thus if caller
set ModuleOffset.SectionIndex into object::SectionedAddress::UndefSection
state then symbolizer would detect section index using
getModuleSectionIndexForAddress routine.
Differential Revision: https://reviews.llvm.org/D58848
llvm-svn: 356829
That patch is the fix for https://bugs.llvm.org/show_bug.cgi?id=40703
"wrong line number info for obj file compiled with -ffunction-sections"
bug. The problem happened with only .o files. If object file contains
several .text sections then line number information showed incorrectly.
The reason for this is that DwarfLineTable could not detect section which
corresponds to specified address(because address is the local to the
section). And as the result it could not select proper sequence in the
line table. The fix is to pass SectionIndex with the address. So that it
would be possible to differentiate addresses from various sections. With
this fix llvm-objdump shows correct line numbers for disassembled code.
Differential review: https://reviews.llvm.org/D58194
llvm-svn: 354972
Summary:
llvm-symbolizer would originally report symbols that belonged to an invalid object file section.
Specifically the case where: `*Symbol.getSection() == ObjFile.section_end()`
This patch prevents the Symbolizer from collecting symbols that belong to invalid sections.
The test (from PR40591) introduces a case where two symbols have address 0,
one symbol is defined, 'foo', and the other is not defined, 'bar'. This patch will cause
the Symbolizer to keep 'foo' and ignore 'bar'.
As a side note, the logic for adding symbols to the Symbolizer's store
(`SymbolizableObjectFile::addSymbol`) replaces symbols with the
same <address, size> pair. At some point that logic should be revisited as in the
aforementioned case, 'bar' was overwriting 'foo' in the Symbolizer's store,
and 'foo' was forgotten.
This fixes PR40591
Reviewers: jhenderson, rupprecht
Reviewed By: rupprecht
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58146
llvm-svn: 354083
Summary:
rL189250 added a realpath call, and rL352916 because realpath breaks assumptions with some build systems. However, the /usr/lib/debug case has been clarified, falling back to /usr/lib/debug is currently broken if the obj passed in is a relative path. Adding a call to use absolute paths when falling back to /usr/lib/debug fixes that while still not making any realpath assumptions.
This also adds a --fallback-debug-path command line flag for testing (since we probably can't write to /usr/lib/debug from buildbot environments), but was also verified manually:
```
$ rm -f path/to/dwarfdump-test.elf-x86-64
$ strace llvm-symbolizer --obj=relative/path/to/dwarfdump-test.elf-x86-64.debuglink 0x40113f |& grep dwarfdump
```
Lookups went to relative/path/to/dwarfdump-test.elf-x86-64, relative/path/to/.debug/dwarfdump-test.elf-x86-64, and then finally /usr/lib/debug/absolute/path/to/dwarfdump-test.elf-x86-64.
Reviewers: dblaikie, samsonov
Reviewed By: dblaikie
Subscribers: krytarowski, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57916
llvm-svn: 353730
Summary:
Using realpath makes assumptions about build systems that do not always hold true. The debug binary referred to from the .gnu_debuglink should exist in the same directory (or in a .debug directory, etc.), but the files may only exist as symlinks to a differently named files elsewhere, and using realpath causes that lookup to fail.
This was added in r189250, and this is basically a revert + regression test case.
Reviewers: dblaikie, samsonov, jhenderson
Reviewed By: dblaikie
Subscribers: llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57609
llvm-svn: 352916
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Following D50807, and heading towards D50664, this intermediary change does the following:
1. Upgrade all custom Error types in llvm/trunk/lib/DebugInfo/ to use the new StringError behavior (D50807).
2. Implement std::is_error_code_enum and make_error_code() for DebugInfo error enumerations.
3. Rename GenericError -> PDBError (the file will be renamed in a subsequent commit)
4. Update custom error messages to follow the same formatting: (\w\s*)+\.
5. Keep generic "file not found" (ENOENT) errors as they are in PDB code. Previously, there used to be a custom enumeration for that purpose.
6. Remove a few extraneous LF in log() implementations. Printing LF is a responsability at a higher level, not at the error level.
Differential Revision: https://reviews.llvm.org/D51499
llvm-svn: 341228
Summary:
The NetBSD Operating System installs debuginfo
files into /usr/libdata/debug, rather than other path
like in some other popular distribution.
This change makes llvm-symbolizer functional with
the basesystem executables.
Reviewers: joerg, vitalybuka
Reviewed By: vitalybuka
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D48525
llvm-svn: 335511
Currently on Windows (_MSC_VER) LLVMSymbolizer supports only Microsoft mangling.
This fix just explicitly uses itaniumDemangle when mangled name starts with _Z.
Differential Revision: https://reviews.llvm.org/D44192
llvm-svn: 326959
Summary:
The symbolizer was checking for .debug as a subdirectory of the
binary file itself, not of the directory containing the binary. This led to
a failure to find split debug info when it was contained in a .debug directory.
Reviewers: rnk, glider, zturner
Subscribers: llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D44025
llvm-svn: 326630
If you've archived the DWP file somewhere it's probably useful to be
able to just tell llvm-symbolizer where it is when you're symbolizing
stack traces from the binary.
This only provides a mechanism for specifying a single DWP file, good if
you're symbolizing a program with a single DWP file, but it's likely if
the program is dynamically linked that you might have a DWP for each
dynamic library - in which case this feature won't help (at least as
it's surfaced in llvm-symbolizer for now) - in theory it could be
extended to specify a collection of DWP files that could all be
consulted for split CU hash resolution.
llvm-svn: 309498
This changes DwarfContext to delegate to DwarfObject instead of having
pure virtual methods.
With this DwarfContextInMemory is replaced with an implementation of
DwarfObject that is local to a .cpp file.
llvm-svn: 308543
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
We have a lot of very similarly named classes related to
dealing with module debug info. This patch has NFC, it just
renames some classes to be more descriptive (albeit slightly
more to type). The mapping from old to new class names is as
follows:
Old | New
ModInfo | DbiModuleDescriptor
ModuleSubstream | ModuleDebugFragment
ModStream | ModuleDebugStream
With the corresponding Builder classes renamed accordingly.
Differential Revision: https://reviews.llvm.org/D32506
llvm-svn: 301555
DWARF info contains info about the line number at which a function starts (DW_AT_decl_line).
This patch creates a function to look up the start line number for a function, and returns it in
DILineInfo when looking up debug info for a particular address.
Patch by Simon Que!
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D27962
llvm-svn: 294231
With that change, images built with 'lld-link /debug' always have a
debug directory. If no PDB filename was passed on the command line, then
the filename in the executable is empty.
PDB information would never work anyway if the PDB file name is empty,
so go ahead and try DWARF in that case.
llvm-svn: 280410
The DebugDirectory contains a pointer to the CodeView info structure which is a
derivative of the OMF debug directory. The structure has evolved a bit over
time, and PDB 2.0 used a slightly different definition from PDB 7.0. Both of
these are specific to CodeView and not COFF. Reflect this by moving the
structure definitions into the DebugInfo/CodeView headers. Define a generic
DebugInfo union type that can be used to pass around a reference to the
DebugInfo irrespective of the versioning. NFC.
llvm-svn: 278075
a good error message to be produced.
This is nearly the last libObject interface that used ErrorOr and the last one
that appears in llvm/include/llvm/Object/MachO.h . For Mach-O objects this is
just a clean up because it’s version of getSymbolAddress() can’t return an
error.
I will leave it to the experts on COFF and ELF to actually add meaning full
error messages in their tests if they wish. And also leave it to these experts
to change the last two ErrorOr interfaces in llvm/include/llvm/Object/ObjectFile.h
for createCOFFObjectFile() and createELFObjectFile() if they wish.
Since there are no test cases for COFF and ELF error cases with respect to
getSymbolAddress() in the test suite this is no functional change (NFC).
llvm-svn: 273701
Summary:
Previously we would try to load PDBs for every PE executable we tried to
symbolize. If that failed, we would fall back to DWARF. If there wasn't
any DWARF, we'd print mostly useless symbol information using the export
table.
With this change, we only try to load PDBs for executables that claim to
have them. If that fails, we can now print an error rather than falling
back silently. This should make it a lot easier to diagnose and fix
common symbolization issues, such as not having DIA or not having a PDB.
Reviewers: zturner, eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20982
llvm-svn: 271725
when the object is from a slice of a Mach-O Universal Binary use something like
"foo.o (for architecture i386)" as part of the error message when expected.
Also fixed places in these tools that were ignoring object file errors from
MachOUniversalBinary::getAsObjectFile() when the code moved on to see if
the slice was an archive.
To do this MachOUniversalBinary::getAsObjectFile() and
MachOUniversalBinary::getObjectForArch() were changed from returning
ErrorOr<...> to Expected<...> then that was threaded up to its users.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now the use of
errorToErrorCode() is still used in two places yet to be fully converted.
llvm-svn: 271332
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
llvm-svn: 268298
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
llvm-svn: 266919
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
llvm-svn: 265606
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
llvm-svn: 264187
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
