//===- ScalarEvolutionExpander.cpp - Scalar Evolution Analysis --*- C++ -*-===// // // The LLVM Compiler Infrastructure // // This file is distributed under the University of Illinois Open Source // License. See LICENSE.TXT for details. // //===----------------------------------------------------------------------===// // // This file contains the implementation of the scalar evolution expander, // which is used to generate the code corresponding to a given scalar evolution // expression. // //===----------------------------------------------------------------------===// #include "llvm/Analysis/ScalarEvolutionExpander.h" #include "llvm/Analysis/LoopInfo.h" #include "llvm/IntrinsicInst.h" #include "llvm/LLVMContext.h" #include "llvm/Target/TargetData.h" #include "llvm/ADT/STLExtras.h" using namespace llvm; /// ReuseOrCreateCast - Arrange for there to be a cast of V to Ty at IP, /// reusing an existing cast if a suitable one exists, moving an existing /// cast if a suitable one exists but isn't in the right place, or /// creating a new one. Value *SCEVExpander::ReuseOrCreateCast(Value *V, Type *Ty, Instruction::CastOps Op, BasicBlock::iterator IP) { // Check to see if there is already a cast! for (Value::use_iterator UI = V->use_begin(), E = V->use_end(); UI != E; ++UI) { User *U = *UI; if (U->getType() == Ty) if (CastInst *CI = dyn_cast(U)) if (CI->getOpcode() == Op) { // If the cast isn't where we want it, fix it. if (BasicBlock::iterator(CI) != IP) { // Create a new cast, and leave the old cast in place in case // it is being used as an insert point. Clear its operand // so that it doesn't hold anything live. Instruction *NewCI = CastInst::Create(Op, V, Ty, "", IP); NewCI->takeName(CI); CI->replaceAllUsesWith(NewCI); CI->setOperand(0, UndefValue::get(V->getType())); rememberInstruction(NewCI); return NewCI; } rememberInstruction(CI); return CI; } } // Create a new cast. Instruction *I = CastInst::Create(Op, V, Ty, V->getName(), IP); rememberInstruction(I); return I; } /// InsertNoopCastOfTo - Insert a cast of V to the specified type, /// which must be possible with a noop cast, doing what we can to share /// the casts. Value *SCEVExpander::InsertNoopCastOfTo(Value *V, Type *Ty) { Instruction::CastOps Op = CastInst::getCastOpcode(V, false, Ty, false); assert((Op == Instruction::BitCast || Op == Instruction::PtrToInt || Op == Instruction::IntToPtr) && "InsertNoopCastOfTo cannot perform non-noop casts!"); assert(SE.getTypeSizeInBits(V->getType()) == SE.getTypeSizeInBits(Ty) && "InsertNoopCastOfTo cannot change sizes!"); // Short-circuit unnecessary bitcasts. if (Op == Instruction::BitCast && V->getType() == Ty) return V; // Short-circuit unnecessary inttoptr<->ptrtoint casts. if ((Op == Instruction::PtrToInt || Op == Instruction::IntToPtr) && SE.getTypeSizeInBits(Ty) == SE.getTypeSizeInBits(V->getType())) { if (CastInst *CI = dyn_cast(V)) if ((CI->getOpcode() == Instruction::PtrToInt || CI->getOpcode() == Instruction::IntToPtr) && SE.getTypeSizeInBits(CI->getType()) == SE.getTypeSizeInBits(CI->getOperand(0)->getType())) return CI->getOperand(0); if (ConstantExpr *CE = dyn_cast(V)) if ((CE->getOpcode() == Instruction::PtrToInt || CE->getOpcode() == Instruction::IntToPtr) && SE.getTypeSizeInBits(CE->getType()) == SE.getTypeSizeInBits(CE->getOperand(0)->getType())) return CE->getOperand(0); } // Fold a cast of a constant. if (Constant *C = dyn_cast(V)) return ConstantExpr::getCast(Op, C, Ty); // Cast the argument at the beginning of the entry block, after // any bitcasts of other arguments. if (Argument *A = dyn_cast(V)) { BasicBlock::iterator IP = A->getParent()->getEntryBlock().begin(); while ((isa(IP) && isa(cast(IP)->getOperand(0)) && cast(IP)->getOperand(0) != A) || isa(IP)) ++IP; return ReuseOrCreateCast(A, Ty, Op, IP); } // Cast the instruction immediately after the instruction. Instruction *I = cast(V); BasicBlock::iterator IP = I; ++IP; if (InvokeInst *II = dyn_cast(I)) IP = II->getNormalDest()->begin(); while (isa(IP) || isa(IP)) ++IP; return ReuseOrCreateCast(I, Ty, Op, IP); } /// InsertBinop - Insert the specified binary operator, doing a small amount /// of work to avoid inserting an obviously redundant operation. Value *SCEVExpander::InsertBinop(Instruction::BinaryOps Opcode, Value *LHS, Value *RHS) { // Fold a binop with constant operands. if (Constant *CLHS = dyn_cast(LHS)) if (Constant *CRHS = dyn_cast(RHS)) return ConstantExpr::get(Opcode, CLHS, CRHS); // Do a quick scan to see if we have this binop nearby. If so, reuse it. unsigned ScanLimit = 6; BasicBlock::iterator BlockBegin = Builder.GetInsertBlock()->begin(); // Scanning starts from the last instruction before the insertion point. BasicBlock::iterator IP = Builder.GetInsertPoint(); if (IP != BlockBegin) { --IP; for (; ScanLimit; --IP, --ScanLimit) { // Don't count dbg.value against the ScanLimit, to avoid perturbing the // generated code. if (isa(IP)) ScanLimit++; if (IP->getOpcode() == (unsigned)Opcode && IP->getOperand(0) == LHS && IP->getOperand(1) == RHS) return IP; if (IP == BlockBegin) break; } } // Save the original insertion point so we can restore it when we're done. BasicBlock *SaveInsertBB = Builder.GetInsertBlock(); BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint(); // Move the insertion point out of as many loops as we can. while (const Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock())) { if (!L->isLoopInvariant(LHS) || !L->isLoopInvariant(RHS)) break; BasicBlock *Preheader = L->getLoopPreheader(); if (!Preheader) break; // Ok, move up a level. Builder.SetInsertPoint(Preheader, Preheader->getTerminator()); } // If we haven't found this binop, insert it. Instruction *BO = cast(Builder.CreateBinOp(Opcode, LHS, RHS, "tmp")); BO->setDebugLoc(SaveInsertPt->getDebugLoc()); rememberInstruction(BO); // Restore the original insert point. if (SaveInsertBB) restoreInsertPoint(SaveInsertBB, SaveInsertPt); return BO; } /// FactorOutConstant - Test if S is divisible by Factor, using signed /// division. If so, update S with Factor divided out and return true. /// S need not be evenly divisible if a reasonable remainder can be /// computed. /// TODO: When ScalarEvolution gets a SCEVSDivExpr, this can be made /// unnecessary; in its place, just signed-divide Ops[i] by the scale and /// check to see if the divide was folded. static bool FactorOutConstant(const SCEV *&S, const SCEV *&Remainder, const SCEV *Factor, ScalarEvolution &SE, const TargetData *TD) { // Everything is divisible by one. if (Factor->isOne()) return true; // x/x == 1. if (S == Factor) { S = SE.getConstant(S->getType(), 1); return true; } // For a Constant, check for a multiple of the given factor. if (const SCEVConstant *C = dyn_cast(S)) { // 0/x == 0. if (C->isZero()) return true; // Check for divisibility. if (const SCEVConstant *FC = dyn_cast(Factor)) { ConstantInt *CI = ConstantInt::get(SE.getContext(), C->getValue()->getValue().sdiv( FC->getValue()->getValue())); // If the quotient is zero and the remainder is non-zero, reject // the value at this scale. It will be considered for subsequent // smaller scales. if (!CI->isZero()) { const SCEV *Div = SE.getConstant(CI); S = Div; Remainder = SE.getAddExpr(Remainder, SE.getConstant(C->getValue()->getValue().srem( FC->getValue()->getValue()))); return true; } } } // In a Mul, check if there is a constant operand which is a multiple // of the given factor. if (const SCEVMulExpr *M = dyn_cast(S)) { if (TD) { // With TargetData, the size is known. Check if there is a constant // operand which is a multiple of the given factor. If so, we can // factor it. const SCEVConstant *FC = cast(Factor); if (const SCEVConstant *C = dyn_cast(M->getOperand(0))) if (!C->getValue()->getValue().srem(FC->getValue()->getValue())) { SmallVector NewMulOps(M->op_begin(), M->op_end()); NewMulOps[0] = SE.getConstant(C->getValue()->getValue().sdiv( FC->getValue()->getValue())); S = SE.getMulExpr(NewMulOps); return true; } } else { // Without TargetData, check if Factor can be factored out of any of the // Mul's operands. If so, we can just remove it. for (unsigned i = 0, e = M->getNumOperands(); i != e; ++i) { const SCEV *SOp = M->getOperand(i); const SCEV *Remainder = SE.getConstant(SOp->getType(), 0); if (FactorOutConstant(SOp, Remainder, Factor, SE, TD) && Remainder->isZero()) { SmallVector NewMulOps(M->op_begin(), M->op_end()); NewMulOps[i] = SOp; S = SE.getMulExpr(NewMulOps); return true; } } } } // In an AddRec, check if both start and step are divisible. if (const SCEVAddRecExpr *A = dyn_cast(S)) { const SCEV *Step = A->getStepRecurrence(SE); const SCEV *StepRem = SE.getConstant(Step->getType(), 0); if (!FactorOutConstant(Step, StepRem, Factor, SE, TD)) return false; if (!StepRem->isZero()) return false; const SCEV *Start = A->getStart(); if (!FactorOutConstant(Start, Remainder, Factor, SE, TD)) return false; // FIXME: can use A->getNoWrapFlags(FlagNW) S = SE.getAddRecExpr(Start, Step, A->getLoop(), SCEV::FlagAnyWrap); return true; } return false; } /// SimplifyAddOperands - Sort and simplify a list of add operands. NumAddRecs /// is the number of SCEVAddRecExprs present, which are kept at the end of /// the list. /// static void SimplifyAddOperands(SmallVectorImpl &Ops, Type *Ty, ScalarEvolution &SE) { unsigned NumAddRecs = 0; for (unsigned i = Ops.size(); i > 0 && isa(Ops[i-1]); --i) ++NumAddRecs; // Group Ops into non-addrecs and addrecs. SmallVector NoAddRecs(Ops.begin(), Ops.end() - NumAddRecs); SmallVector AddRecs(Ops.end() - NumAddRecs, Ops.end()); // Let ScalarEvolution sort and simplify the non-addrecs list. const SCEV *Sum = NoAddRecs.empty() ? SE.getConstant(Ty, 0) : SE.getAddExpr(NoAddRecs); // If it returned an add, use the operands. Otherwise it simplified // the sum into a single value, so just use that. Ops.clear(); if (const SCEVAddExpr *Add = dyn_cast(Sum)) Ops.append(Add->op_begin(), Add->op_end()); else if (!Sum->isZero()) Ops.push_back(Sum); // Then append the addrecs. Ops.append(AddRecs.begin(), AddRecs.end()); } /// SplitAddRecs - Flatten a list of add operands, moving addrec start values /// out to the top level. For example, convert {a + b,+,c} to a, b, {0,+,d}. /// This helps expose more opportunities for folding parts of the expressions /// into GEP indices. /// static void SplitAddRecs(SmallVectorImpl &Ops, Type *Ty, ScalarEvolution &SE) { // Find the addrecs. SmallVector AddRecs; for (unsigned i = 0, e = Ops.size(); i != e; ++i) while (const SCEVAddRecExpr *A = dyn_cast(Ops[i])) { const SCEV *Start = A->getStart(); if (Start->isZero()) break; const SCEV *Zero = SE.getConstant(Ty, 0); AddRecs.push_back(SE.getAddRecExpr(Zero, A->getStepRecurrence(SE), A->getLoop(), // FIXME: A->getNoWrapFlags(FlagNW) SCEV::FlagAnyWrap)); if (const SCEVAddExpr *Add = dyn_cast(Start)) { Ops[i] = Zero; Ops.append(Add->op_begin(), Add->op_end()); e += Add->getNumOperands(); } else { Ops[i] = Start; } } if (!AddRecs.empty()) { // Add the addrecs onto the end of the list. Ops.append(AddRecs.begin(), AddRecs.end()); // Resort the operand list, moving any constants to the front. SimplifyAddOperands(Ops, Ty, SE); } } /// expandAddToGEP - Expand an addition expression with a pointer type into /// a GEP instead of using ptrtoint+arithmetic+inttoptr. This helps /// BasicAliasAnalysis and other passes analyze the result. See the rules /// for getelementptr vs. inttoptr in /// http://llvm.org/docs/LangRef.html#pointeraliasing /// for details. /// /// Design note: The correctness of using getelementptr here depends on /// ScalarEvolution not recognizing inttoptr and ptrtoint operators, as /// they may introduce pointer arithmetic which may not be safely converted /// into getelementptr. /// /// Design note: It might seem desirable for this function to be more /// loop-aware. If some of the indices are loop-invariant while others /// aren't, it might seem desirable to emit multiple GEPs, keeping the /// loop-invariant portions of the overall computation outside the loop. /// However, there are a few reasons this is not done here. Hoisting simple /// arithmetic is a low-level optimization that often isn't very /// important until late in the optimization process. In fact, passes /// like InstructionCombining will combine GEPs, even if it means /// pushing loop-invariant computation down into loops, so even if the /// GEPs were split here, the work would quickly be undone. The /// LoopStrengthReduction pass, which is usually run quite late (and /// after the last InstructionCombining pass), takes care of hoisting /// loop-invariant portions of expressions, after considering what /// can be folded using target addressing modes. /// Value *SCEVExpander::expandAddToGEP(const SCEV *const *op_begin, const SCEV *const *op_end, PointerType *PTy, Type *Ty, Value *V) { Type *ElTy = PTy->getElementType(); SmallVector GepIndices; SmallVector Ops(op_begin, op_end); bool AnyNonZeroIndices = false; // Split AddRecs up into parts as either of the parts may be usable // without the other. SplitAddRecs(Ops, Ty, SE); // Descend down the pointer's type and attempt to convert the other // operands into GEP indices, at each level. The first index in a GEP // indexes into the array implied by the pointer operand; the rest of // the indices index into the element or field type selected by the // preceding index. for (;;) { // If the scale size is not 0, attempt to factor out a scale for // array indexing. SmallVector ScaledOps; if (ElTy->isSized()) { const SCEV *ElSize = SE.getSizeOfExpr(ElTy); if (!ElSize->isZero()) { SmallVector NewOps; for (unsigned i = 0, e = Ops.size(); i != e; ++i) { const SCEV *Op = Ops[i]; const SCEV *Remainder = SE.getConstant(Ty, 0); if (FactorOutConstant(Op, Remainder, ElSize, SE, SE.TD)) { // Op now has ElSize factored out. ScaledOps.push_back(Op); if (!Remainder->isZero()) NewOps.push_back(Remainder); AnyNonZeroIndices = true; } else { // The operand was not divisible, so add it to the list of operands // we'll scan next iteration. NewOps.push_back(Ops[i]); } } // If we made any changes, update Ops. if (!ScaledOps.empty()) { Ops = NewOps; SimplifyAddOperands(Ops, Ty, SE); } } } // Record the scaled array index for this level of the type. If // we didn't find any operands that could be factored, tentatively // assume that element zero was selected (since the zero offset // would obviously be folded away). Value *Scaled = ScaledOps.empty() ? Constant::getNullValue(Ty) : expandCodeFor(SE.getAddExpr(ScaledOps), Ty); GepIndices.push_back(Scaled); // Collect struct field index operands. while (StructType *STy = dyn_cast(ElTy)) { bool FoundFieldNo = false; // An empty struct has no fields. if (STy->getNumElements() == 0) break; if (SE.TD) { // With TargetData, field offsets are known. See if a constant offset // falls within any of the struct fields. if (Ops.empty()) break; if (const SCEVConstant *C = dyn_cast(Ops[0])) if (SE.getTypeSizeInBits(C->getType()) <= 64) { const StructLayout &SL = *SE.TD->getStructLayout(STy); uint64_t FullOffset = C->getValue()->getZExtValue(); if (FullOffset < SL.getSizeInBytes()) { unsigned ElIdx = SL.getElementContainingOffset(FullOffset); GepIndices.push_back( ConstantInt::get(Type::getInt32Ty(Ty->getContext()), ElIdx)); ElTy = STy->getTypeAtIndex(ElIdx); Ops[0] = SE.getConstant(Ty, FullOffset - SL.getElementOffset(ElIdx)); AnyNonZeroIndices = true; FoundFieldNo = true; } } } else { // Without TargetData, just check for an offsetof expression of the // appropriate struct type. for (unsigned i = 0, e = Ops.size(); i != e; ++i) if (const SCEVUnknown *U = dyn_cast(Ops[i])) { Type *CTy; Constant *FieldNo; if (U->isOffsetOf(CTy, FieldNo) && CTy == STy) { GepIndices.push_back(FieldNo); ElTy = STy->getTypeAtIndex(cast(FieldNo)->getZExtValue()); Ops[i] = SE.getConstant(Ty, 0); AnyNonZeroIndices = true; FoundFieldNo = true; break; } } } // If no struct field offsets were found, tentatively assume that // field zero was selected (since the zero offset would obviously // be folded away). if (!FoundFieldNo) { ElTy = STy->getTypeAtIndex(0u); GepIndices.push_back( Constant::getNullValue(Type::getInt32Ty(Ty->getContext()))); } } if (ArrayType *ATy = dyn_cast(ElTy)) ElTy = ATy->getElementType(); else break; } // If none of the operands were convertible to proper GEP indices, cast // the base to i8* and do an ugly getelementptr with that. It's still // better than ptrtoint+arithmetic+inttoptr at least. if (!AnyNonZeroIndices) { // Cast the base to i8*. V = InsertNoopCastOfTo(V, Type::getInt8PtrTy(Ty->getContext(), PTy->getAddressSpace())); // Expand the operands for a plain byte offset. Value *Idx = expandCodeFor(SE.getAddExpr(Ops), Ty); // Fold a GEP with constant operands. if (Constant *CLHS = dyn_cast(V)) if (Constant *CRHS = dyn_cast(Idx)) return ConstantExpr::getGetElementPtr(CLHS, CRHS); // Do a quick scan to see if we have this GEP nearby. If so, reuse it. unsigned ScanLimit = 6; BasicBlock::iterator BlockBegin = Builder.GetInsertBlock()->begin(); // Scanning starts from the last instruction before the insertion point. BasicBlock::iterator IP = Builder.GetInsertPoint(); if (IP != BlockBegin) { --IP; for (; ScanLimit; --IP, --ScanLimit) { // Don't count dbg.value against the ScanLimit, to avoid perturbing the // generated code. if (isa(IP)) ScanLimit++; if (IP->getOpcode() == Instruction::GetElementPtr && IP->getOperand(0) == V && IP->getOperand(1) == Idx) return IP; if (IP == BlockBegin) break; } } // Save the original insertion point so we can restore it when we're done. BasicBlock *SaveInsertBB = Builder.GetInsertBlock(); BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint(); // Move the insertion point out of as many loops as we can. while (const Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock())) { if (!L->isLoopInvariant(V) || !L->isLoopInvariant(Idx)) break; BasicBlock *Preheader = L->getLoopPreheader(); if (!Preheader) break; // Ok, move up a level. Builder.SetInsertPoint(Preheader, Preheader->getTerminator()); } // Emit a GEP. Value *GEP = Builder.CreateGEP(V, Idx, "uglygep"); rememberInstruction(GEP); // Restore the original insert point. if (SaveInsertBB) restoreInsertPoint(SaveInsertBB, SaveInsertPt); return GEP; } // Save the original insertion point so we can restore it when we're done. BasicBlock *SaveInsertBB = Builder.GetInsertBlock(); BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint(); // Move the insertion point out of as many loops as we can. while (const Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock())) { if (!L->isLoopInvariant(V)) break; bool AnyIndexNotLoopInvariant = false; for (SmallVectorImpl::const_iterator I = GepIndices.begin(), E = GepIndices.end(); I != E; ++I) if (!L->isLoopInvariant(*I)) { AnyIndexNotLoopInvariant = true; break; } if (AnyIndexNotLoopInvariant) break; BasicBlock *Preheader = L->getLoopPreheader(); if (!Preheader) break; // Ok, move up a level. Builder.SetInsertPoint(Preheader, Preheader->getTerminator()); } // Insert a pretty getelementptr. Note that this GEP is not marked inbounds, // because ScalarEvolution may have changed the address arithmetic to // compute a value which is beyond the end of the allocated object. Value *Casted = V; if (V->getType() != PTy) Casted = InsertNoopCastOfTo(Casted, PTy); Value *GEP = Builder.CreateGEP(Casted, GepIndices, "scevgep"); Ops.push_back(SE.getUnknown(GEP)); rememberInstruction(GEP); // Restore the original insert point. if (SaveInsertBB) restoreInsertPoint(SaveInsertBB, SaveInsertPt); return expand(SE.getAddExpr(Ops)); } /// isNonConstantNegative - Return true if the specified scev is negated, but /// not a constant. static bool isNonConstantNegative(const SCEV *F) { const SCEVMulExpr *Mul = dyn_cast(F); if (!Mul) return false; // If there is a constant factor, it will be first. const SCEVConstant *SC = dyn_cast(Mul->getOperand(0)); if (!SC) return false; // Return true if the value is negative, this matches things like (-42 * V). return SC->getValue()->getValue().isNegative(); } /// PickMostRelevantLoop - Given two loops pick the one that's most relevant for /// SCEV expansion. If they are nested, this is the most nested. If they are /// neighboring, pick the later. static const Loop *PickMostRelevantLoop(const Loop *A, const Loop *B, DominatorTree &DT) { if (!A) return B; if (!B) return A; if (A->contains(B)) return B; if (B->contains(A)) return A; if (DT.dominates(A->getHeader(), B->getHeader())) return B; if (DT.dominates(B->getHeader(), A->getHeader())) return A; return A; // Arbitrarily break the tie. } /// getRelevantLoop - Get the most relevant loop associated with the given /// expression, according to PickMostRelevantLoop. const Loop *SCEVExpander::getRelevantLoop(const SCEV *S) { // Test whether we've already computed the most relevant loop for this SCEV. std::pair::iterator, bool> Pair = RelevantLoops.insert(std::make_pair(S, static_cast(0))); if (!Pair.second) return Pair.first->second; if (isa(S)) // A constant has no relevant loops. return 0; if (const SCEVUnknown *U = dyn_cast(S)) { if (const Instruction *I = dyn_cast(U->getValue())) return Pair.first->second = SE.LI->getLoopFor(I->getParent()); // A non-instruction has no relevant loops. return 0; } if (const SCEVNAryExpr *N = dyn_cast(S)) { const Loop *L = 0; if (const SCEVAddRecExpr *AR = dyn_cast(S)) L = AR->getLoop(); for (SCEVNAryExpr::op_iterator I = N->op_begin(), E = N->op_end(); I != E; ++I) L = PickMostRelevantLoop(L, getRelevantLoop(*I), *SE.DT); return RelevantLoops[N] = L; } if (const SCEVCastExpr *C = dyn_cast(S)) { const Loop *Result = getRelevantLoop(C->getOperand()); return RelevantLoops[C] = Result; } if (const SCEVUDivExpr *D = dyn_cast(S)) { const Loop *Result = PickMostRelevantLoop(getRelevantLoop(D->getLHS()), getRelevantLoop(D->getRHS()), *SE.DT); return RelevantLoops[D] = Result; } llvm_unreachable("Unexpected SCEV type!"); return 0; } namespace { /// LoopCompare - Compare loops by PickMostRelevantLoop. class LoopCompare { DominatorTree &DT; public: explicit LoopCompare(DominatorTree &dt) : DT(dt) {} bool operator()(std::pair LHS, std::pair RHS) const { // Keep pointer operands sorted at the end. if (LHS.second->getType()->isPointerTy() != RHS.second->getType()->isPointerTy()) return LHS.second->getType()->isPointerTy(); // Compare loops with PickMostRelevantLoop. if (LHS.first != RHS.first) return PickMostRelevantLoop(LHS.first, RHS.first, DT) != LHS.first; // If one operand is a non-constant negative and the other is not, // put the non-constant negative on the right so that a sub can // be used instead of a negate and add. if (isNonConstantNegative(LHS.second)) { if (!isNonConstantNegative(RHS.second)) return false; } else if (isNonConstantNegative(RHS.second)) return true; // Otherwise they are equivalent according to this comparison. return false; } }; } Value *SCEVExpander::visitAddExpr(const SCEVAddExpr *S) { Type *Ty = SE.getEffectiveSCEVType(S->getType()); // Collect all the add operands in a loop, along with their associated loops. // Iterate in reverse so that constants are emitted last, all else equal, and // so that pointer operands are inserted first, which the code below relies on // to form more involved GEPs. SmallVector, 8> OpsAndLoops; for (std::reverse_iterator I(S->op_end()), E(S->op_begin()); I != E; ++I) OpsAndLoops.push_back(std::make_pair(getRelevantLoop(*I), *I)); // Sort by loop. Use a stable sort so that constants follow non-constants and // pointer operands precede non-pointer operands. std::stable_sort(OpsAndLoops.begin(), OpsAndLoops.end(), LoopCompare(*SE.DT)); // Emit instructions to add all the operands. Hoist as much as possible // out of loops, and form meaningful getelementptrs where possible. Value *Sum = 0; for (SmallVectorImpl >::iterator I = OpsAndLoops.begin(), E = OpsAndLoops.end(); I != E; ) { const Loop *CurLoop = I->first; const SCEV *Op = I->second; if (!Sum) { // This is the first operand. Just expand it. Sum = expand(Op); ++I; } else if (PointerType *PTy = dyn_cast(Sum->getType())) { // The running sum expression is a pointer. Try to form a getelementptr // at this level with that as the base. SmallVector NewOps; for (; I != E && I->first == CurLoop; ++I) { // If the operand is SCEVUnknown and not instructions, peek through // it, to enable more of it to be folded into the GEP. const SCEV *X = I->second; if (const SCEVUnknown *U = dyn_cast(X)) if (!isa(U->getValue())) X = SE.getSCEV(U->getValue()); NewOps.push_back(X); } Sum = expandAddToGEP(NewOps.begin(), NewOps.end(), PTy, Ty, Sum); } else if (PointerType *PTy = dyn_cast(Op->getType())) { // The running sum is an integer, and there's a pointer at this level. // Try to form a getelementptr. If the running sum is instructions, // use a SCEVUnknown to avoid re-analyzing them. SmallVector NewOps; NewOps.push_back(isa(Sum) ? SE.getUnknown(Sum) : SE.getSCEV(Sum)); for (++I; I != E && I->first == CurLoop; ++I) NewOps.push_back(I->second); Sum = expandAddToGEP(NewOps.begin(), NewOps.end(), PTy, Ty, expand(Op)); } else if (isNonConstantNegative(Op)) { // Instead of doing a negate and add, just do a subtract. Value *W = expandCodeFor(SE.getNegativeSCEV(Op), Ty); Sum = InsertNoopCastOfTo(Sum, Ty); Sum = InsertBinop(Instruction::Sub, Sum, W); ++I; } else { // A simple add. Value *W = expandCodeFor(Op, Ty); Sum = InsertNoopCastOfTo(Sum, Ty); // Canonicalize a constant to the RHS. if (isa(Sum)) std::swap(Sum, W); Sum = InsertBinop(Instruction::Add, Sum, W); ++I; } } return Sum; } Value *SCEVExpander::visitMulExpr(const SCEVMulExpr *S) { Type *Ty = SE.getEffectiveSCEVType(S->getType()); // Collect all the mul operands in a loop, along with their associated loops. // Iterate in reverse so that constants are emitted last, all else equal. SmallVector, 8> OpsAndLoops; for (std::reverse_iterator I(S->op_end()), E(S->op_begin()); I != E; ++I) OpsAndLoops.push_back(std::make_pair(getRelevantLoop(*I), *I)); // Sort by loop. Use a stable sort so that constants follow non-constants. std::stable_sort(OpsAndLoops.begin(), OpsAndLoops.end(), LoopCompare(*SE.DT)); // Emit instructions to mul all the operands. Hoist as much as possible // out of loops. Value *Prod = 0; for (SmallVectorImpl >::iterator I = OpsAndLoops.begin(), E = OpsAndLoops.end(); I != E; ) { const SCEV *Op = I->second; if (!Prod) { // This is the first operand. Just expand it. Prod = expand(Op); ++I; } else if (Op->isAllOnesValue()) { // Instead of doing a multiply by negative one, just do a negate. Prod = InsertNoopCastOfTo(Prod, Ty); Prod = InsertBinop(Instruction::Sub, Constant::getNullValue(Ty), Prod); ++I; } else { // A simple mul. Value *W = expandCodeFor(Op, Ty); Prod = InsertNoopCastOfTo(Prod, Ty); // Canonicalize a constant to the RHS. if (isa(Prod)) std::swap(Prod, W); Prod = InsertBinop(Instruction::Mul, Prod, W); ++I; } } return Prod; } Value *SCEVExpander::visitUDivExpr(const SCEVUDivExpr *S) { Type *Ty = SE.getEffectiveSCEVType(S->getType()); Value *LHS = expandCodeFor(S->getLHS(), Ty); if (const SCEVConstant *SC = dyn_cast(S->getRHS())) { const APInt &RHS = SC->getValue()->getValue(); if (RHS.isPowerOf2()) return InsertBinop(Instruction::LShr, LHS, ConstantInt::get(Ty, RHS.logBase2())); } Value *RHS = expandCodeFor(S->getRHS(), Ty); return InsertBinop(Instruction::UDiv, LHS, RHS); } /// Move parts of Base into Rest to leave Base with the minimal /// expression that provides a pointer operand suitable for a /// GEP expansion. static void ExposePointerBase(const SCEV *&Base, const SCEV *&Rest, ScalarEvolution &SE) { while (const SCEVAddRecExpr *A = dyn_cast(Base)) { Base = A->getStart(); Rest = SE.getAddExpr(Rest, SE.getAddRecExpr(SE.getConstant(A->getType(), 0), A->getStepRecurrence(SE), A->getLoop(), // FIXME: A->getNoWrapFlags(FlagNW) SCEV::FlagAnyWrap)); } if (const SCEVAddExpr *A = dyn_cast(Base)) { Base = A->getOperand(A->getNumOperands()-1); SmallVector NewAddOps(A->op_begin(), A->op_end()); NewAddOps.back() = Rest; Rest = SE.getAddExpr(NewAddOps); ExposePointerBase(Base, Rest, SE); } } /// getAddRecExprPHILiterally - Helper for expandAddRecExprLiterally. Expand /// the base addrec, which is the addrec without any non-loop-dominating /// values, and return the PHI. PHINode * SCEVExpander::getAddRecExprPHILiterally(const SCEVAddRecExpr *Normalized, const Loop *L, Type *ExpandTy, Type *IntTy) { assert((!IVIncInsertLoop||IVIncInsertPos) && "Uninitialized insert position"); // Reuse a previously-inserted PHI, if present. for (BasicBlock::iterator I = L->getHeader()->begin(); PHINode *PN = dyn_cast(I); ++I) if (SE.isSCEVable(PN->getType()) && (SE.getEffectiveSCEVType(PN->getType()) == SE.getEffectiveSCEVType(Normalized->getType())) && SE.getSCEV(PN) == Normalized) if (BasicBlock *LatchBlock = L->getLoopLatch()) { Instruction *IncV = cast(PN->getIncomingValueForBlock(LatchBlock)); // Determine if this is a well-behaved chain of instructions leading // back to the PHI. It probably will be, if we're scanning an inner // loop already visited by LSR for example, but it wouldn't have // to be. do { if (IncV->getNumOperands() == 0 || isa(IncV) || (isa(IncV) && !isa(IncV))) { IncV = 0; break; } // If any of the operands don't dominate the insert position, bail. // Addrec operands are always loop-invariant, so this can only happen // if there are instructions which haven't been hoisted. if (L == IVIncInsertLoop) { for (User::op_iterator OI = IncV->op_begin()+1, OE = IncV->op_end(); OI != OE; ++OI) if (Instruction *OInst = dyn_cast(OI)) if (!SE.DT->dominates(OInst, IVIncInsertPos)) { IncV = 0; break; } } if (!IncV) break; // Advance to the next instruction. IncV = dyn_cast(IncV->getOperand(0)); if (!IncV) break; if (IncV->mayHaveSideEffects()) { IncV = 0; break; } } while (IncV != PN); if (IncV) { // Ok, the add recurrence looks usable. // Remember this PHI, even in post-inc mode. InsertedValues.insert(PN); // Remember the increment. IncV = cast(PN->getIncomingValueForBlock(LatchBlock)); rememberInstruction(IncV); if (L == IVIncInsertLoop) do { if (SE.DT->dominates(IncV, IVIncInsertPos)) break; // Make sure the increment is where we want it. But don't move it // down past a potential existing post-inc user. IncV->moveBefore(IVIncInsertPos); IVIncInsertPos = IncV; IncV = cast(IncV->getOperand(0)); } while (IncV != PN); return PN; } } // Save the original insertion point so we can restore it when we're done. BasicBlock *SaveInsertBB = Builder.GetInsertBlock(); BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint(); // Expand code for the start value. Value *StartV = expandCodeFor(Normalized->getStart(), ExpandTy, L->getHeader()->begin()); // StartV must be hoisted into L's preheader to dominate the new phi. assert(!isa(StartV) || SE.DT->properlyDominates(cast(StartV)->getParent(), L->getHeader())); // Expand code for the step value. Insert instructions right before the // terminator corresponding to the back-edge. Do this before creating the PHI // so that PHI reuse code doesn't see an incomplete PHI. If the stride is // negative, insert a sub instead of an add for the increment (unless it's a // constant, because subtracts of constants are canonicalized to adds). const SCEV *Step = Normalized->getStepRecurrence(SE); bool isPointer = ExpandTy->isPointerTy(); bool isNegative = !isPointer && isNonConstantNegative(Step); if (isNegative) Step = SE.getNegativeSCEV(Step); Value *StepV = expandCodeFor(Step, IntTy, L->getHeader()->begin()); // Create the PHI. BasicBlock *Header = L->getHeader(); Builder.SetInsertPoint(Header, Header->begin()); pred_iterator HPB = pred_begin(Header), HPE = pred_end(Header); PHINode *PN = Builder.CreatePHI(ExpandTy, std::distance(HPB, HPE), Twine(IVName) + ".iv"); rememberInstruction(PN); // Create the step instructions and populate the PHI. for (pred_iterator HPI = HPB; HPI != HPE; ++HPI) { BasicBlock *Pred = *HPI; // Add a start value. if (!L->contains(Pred)) { PN->addIncoming(StartV, Pred); continue; } // Create a step value and add it to the PHI. If IVIncInsertLoop is // non-null and equal to the addrec's loop, insert the instructions // at IVIncInsertPos. Instruction *InsertPos = L == IVIncInsertLoop ? IVIncInsertPos : Pred->getTerminator(); Builder.SetInsertPoint(InsertPos); Value *IncV; // If the PHI is a pointer, use a GEP, otherwise use an add or sub. if (isPointer) { PointerType *GEPPtrTy = cast(ExpandTy); // If the step isn't constant, don't use an implicitly scaled GEP, because // that would require a multiply inside the loop. if (!isa(StepV)) GEPPtrTy = PointerType::get(Type::getInt1Ty(SE.getContext()), GEPPtrTy->getAddressSpace()); const SCEV *const StepArray[1] = { SE.getSCEV(StepV) }; IncV = expandAddToGEP(StepArray, StepArray+1, GEPPtrTy, IntTy, PN); if (IncV->getType() != PN->getType()) { IncV = Builder.CreateBitCast(IncV, PN->getType(), "tmp"); rememberInstruction(IncV); } } else { IncV = isNegative ? Builder.CreateSub(PN, StepV, Twine(IVName) + ".iv.next") : Builder.CreateAdd(PN, StepV, Twine(IVName) + ".iv.next"); rememberInstruction(IncV); } PN->addIncoming(IncV, Pred); } // Restore the original insert point. if (SaveInsertBB) restoreInsertPoint(SaveInsertBB, SaveInsertPt); // Remember this PHI, even in post-inc mode. InsertedValues.insert(PN); return PN; } Value *SCEVExpander::expandAddRecExprLiterally(const SCEVAddRecExpr *S) { Type *STy = S->getType(); Type *IntTy = SE.getEffectiveSCEVType(STy); const Loop *L = S->getLoop(); // Determine a normalized form of this expression, which is the expression // before any post-inc adjustment is made. const SCEVAddRecExpr *Normalized = S; if (PostIncLoops.count(L)) { PostIncLoopSet Loops; Loops.insert(L); Normalized = cast(TransformForPostIncUse(Normalize, S, 0, 0, Loops, SE, *SE.DT)); } // Strip off any non-loop-dominating component from the addrec start. const SCEV *Start = Normalized->getStart(); const SCEV *PostLoopOffset = 0; if (!SE.properlyDominates(Start, L->getHeader())) { PostLoopOffset = Start; Start = SE.getConstant(Normalized->getType(), 0); Normalized = cast( SE.getAddRecExpr(Start, Normalized->getStepRecurrence(SE), Normalized->getLoop(), // FIXME: Normalized->getNoWrapFlags(FlagNW) SCEV::FlagAnyWrap)); } // Strip off any non-loop-dominating component from the addrec step. const SCEV *Step = Normalized->getStepRecurrence(SE); const SCEV *PostLoopScale = 0; if (!SE.dominates(Step, L->getHeader())) { PostLoopScale = Step; Step = SE.getConstant(Normalized->getType(), 1); Normalized = cast(SE.getAddRecExpr(Start, Step, Normalized->getLoop(), // FIXME: Normalized // ->getNoWrapFlags(FlagNW) SCEV::FlagAnyWrap)); } // Expand the core addrec. If we need post-loop scaling, force it to // expand to an integer type to avoid the need for additional casting. Type *ExpandTy = PostLoopScale ? IntTy : STy; PHINode *PN = getAddRecExprPHILiterally(Normalized, L, ExpandTy, IntTy); // Accommodate post-inc mode, if necessary. Value *Result; if (!PostIncLoops.count(L)) Result = PN; else { // In PostInc mode, use the post-incremented value. BasicBlock *LatchBlock = L->getLoopLatch(); assert(LatchBlock && "PostInc mode requires a unique loop latch!"); Result = PN->getIncomingValueForBlock(LatchBlock); } // Re-apply any non-loop-dominating scale. if (PostLoopScale) { Result = InsertNoopCastOfTo(Result, IntTy); Result = Builder.CreateMul(Result, expandCodeFor(PostLoopScale, IntTy)); rememberInstruction(Result); } // Re-apply any non-loop-dominating offset. if (PostLoopOffset) { if (PointerType *PTy = dyn_cast(ExpandTy)) { const SCEV *const OffsetArray[1] = { PostLoopOffset }; Result = expandAddToGEP(OffsetArray, OffsetArray+1, PTy, IntTy, Result); } else { Result = InsertNoopCastOfTo(Result, IntTy); Result = Builder.CreateAdd(Result, expandCodeFor(PostLoopOffset, IntTy)); rememberInstruction(Result); } } return Result; } Value *SCEVExpander::visitAddRecExpr(const SCEVAddRecExpr *S) { if (!CanonicalMode) return expandAddRecExprLiterally(S); Type *Ty = SE.getEffectiveSCEVType(S->getType()); const Loop *L = S->getLoop(); // First check for an existing canonical IV in a suitable type. PHINode *CanonicalIV = 0; if (PHINode *PN = L->getCanonicalInductionVariable()) if (SE.getTypeSizeInBits(PN->getType()) >= SE.getTypeSizeInBits(Ty)) CanonicalIV = PN; // Rewrite an AddRec in terms of the canonical induction variable, if // its type is more narrow. if (CanonicalIV && SE.getTypeSizeInBits(CanonicalIV->getType()) > SE.getTypeSizeInBits(Ty)) { SmallVector NewOps(S->getNumOperands()); for (unsigned i = 0, e = S->getNumOperands(); i != e; ++i) NewOps[i] = SE.getAnyExtendExpr(S->op_begin()[i], CanonicalIV->getType()); Value *V = expand(SE.getAddRecExpr(NewOps, S->getLoop(), // FIXME: S->getNoWrapFlags(FlagNW) SCEV::FlagAnyWrap)); BasicBlock *SaveInsertBB = Builder.GetInsertBlock(); BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint(); BasicBlock::iterator NewInsertPt = llvm::next(BasicBlock::iterator(cast(V))); while (isa(NewInsertPt) || isa(NewInsertPt)) ++NewInsertPt; V = expandCodeFor(SE.getTruncateExpr(SE.getUnknown(V), Ty), 0, NewInsertPt); restoreInsertPoint(SaveInsertBB, SaveInsertPt); return V; } // {X,+,F} --> X + {0,+,F} if (!S->getStart()->isZero()) { SmallVector NewOps(S->op_begin(), S->op_end()); NewOps[0] = SE.getConstant(Ty, 0); // FIXME: can use S->getNoWrapFlags() const SCEV *Rest = SE.getAddRecExpr(NewOps, L, SCEV::FlagAnyWrap); // Turn things like ptrtoint+arithmetic+inttoptr into GEP. See the // comments on expandAddToGEP for details. const SCEV *Base = S->getStart(); const SCEV *RestArray[1] = { Rest }; // Dig into the expression to find the pointer base for a GEP. ExposePointerBase(Base, RestArray[0], SE); // If we found a pointer, expand the AddRec with a GEP. if (PointerType *PTy = dyn_cast(Base->getType())) { // Make sure the Base isn't something exotic, such as a multiplied // or divided pointer value. In those cases, the result type isn't // actually a pointer type. if (!isa(Base) && !isa(Base)) { Value *StartV = expand(Base); assert(StartV->getType() == PTy && "Pointer type mismatch for GEP!"); return expandAddToGEP(RestArray, RestArray+1, PTy, Ty, StartV); } } // Just do a normal add. Pre-expand the operands to suppress folding. return expand(SE.getAddExpr(SE.getUnknown(expand(S->getStart())), SE.getUnknown(expand(Rest)))); } // If we don't yet have a canonical IV, create one. if (!CanonicalIV) { // Create and insert the PHI node for the induction variable in the // specified loop. BasicBlock *Header = L->getHeader(); pred_iterator HPB = pred_begin(Header), HPE = pred_end(Header); CanonicalIV = PHINode::Create(Ty, std::distance(HPB, HPE), "indvar", Header->begin()); rememberInstruction(CanonicalIV); Constant *One = ConstantInt::get(Ty, 1); for (pred_iterator HPI = HPB; HPI != HPE; ++HPI) { BasicBlock *HP = *HPI; if (L->contains(HP)) { // Insert a unit add instruction right before the terminator // corresponding to the back-edge. Instruction *Add = BinaryOperator::CreateAdd(CanonicalIV, One, "indvar.next", HP->getTerminator()); Add->setDebugLoc(HP->getTerminator()->getDebugLoc()); rememberInstruction(Add); CanonicalIV->addIncoming(Add, HP); } else { CanonicalIV->addIncoming(Constant::getNullValue(Ty), HP); } } } // {0,+,1} --> Insert a canonical induction variable into the loop! if (S->isAffine() && S->getOperand(1)->isOne()) { assert(Ty == SE.getEffectiveSCEVType(CanonicalIV->getType()) && "IVs with types different from the canonical IV should " "already have been handled!"); return CanonicalIV; } // {0,+,F} --> {0,+,1} * F // If this is a simple linear addrec, emit it now as a special case. if (S->isAffine()) // {0,+,F} --> i*F return expand(SE.getTruncateOrNoop( SE.getMulExpr(SE.getUnknown(CanonicalIV), SE.getNoopOrAnyExtend(S->getOperand(1), CanonicalIV->getType())), Ty)); // If this is a chain of recurrences, turn it into a closed form, using the // folders, then expandCodeFor the closed form. This allows the folders to // simplify the expression without having to build a bunch of special code // into this folder. const SCEV *IH = SE.getUnknown(CanonicalIV); // Get I as a "symbolic" SCEV. // Promote S up to the canonical IV type, if the cast is foldable. const SCEV *NewS = S; const SCEV *Ext = SE.getNoopOrAnyExtend(S, CanonicalIV->getType()); if (isa(Ext)) NewS = Ext; const SCEV *V = cast(NewS)->evaluateAtIteration(IH, SE); //cerr << "Evaluated: " << *this << "\n to: " << *V << "\n"; // Truncate the result down to the original type, if needed. const SCEV *T = SE.getTruncateOrNoop(V, Ty); return expand(T); } Value *SCEVExpander::visitTruncateExpr(const SCEVTruncateExpr *S) { Type *Ty = SE.getEffectiveSCEVType(S->getType()); Value *V = expandCodeFor(S->getOperand(), SE.getEffectiveSCEVType(S->getOperand()->getType())); Value *I = Builder.CreateTrunc(V, Ty, "tmp"); rememberInstruction(I); return I; } Value *SCEVExpander::visitZeroExtendExpr(const SCEVZeroExtendExpr *S) { Type *Ty = SE.getEffectiveSCEVType(S->getType()); Value *V = expandCodeFor(S->getOperand(), SE.getEffectiveSCEVType(S->getOperand()->getType())); Value *I = Builder.CreateZExt(V, Ty, "tmp"); rememberInstruction(I); return I; } Value *SCEVExpander::visitSignExtendExpr(const SCEVSignExtendExpr *S) { Type *Ty = SE.getEffectiveSCEVType(S->getType()); Value *V = expandCodeFor(S->getOperand(), SE.getEffectiveSCEVType(S->getOperand()->getType())); Value *I = Builder.CreateSExt(V, Ty, "tmp"); rememberInstruction(I); return I; } Value *SCEVExpander::visitSMaxExpr(const SCEVSMaxExpr *S) { Value *LHS = expand(S->getOperand(S->getNumOperands()-1)); Type *Ty = LHS->getType(); for (int i = S->getNumOperands()-2; i >= 0; --i) { // In the case of mixed integer and pointer types, do the // rest of the comparisons as integer. if (S->getOperand(i)->getType() != Ty) { Ty = SE.getEffectiveSCEVType(Ty); LHS = InsertNoopCastOfTo(LHS, Ty); } Value *RHS = expandCodeFor(S->getOperand(i), Ty); Value *ICmp = Builder.CreateICmpSGT(LHS, RHS, "tmp"); rememberInstruction(ICmp); Value *Sel = Builder.CreateSelect(ICmp, LHS, RHS, "smax"); rememberInstruction(Sel); LHS = Sel; } // In the case of mixed integer and pointer types, cast the // final result back to the pointer type. if (LHS->getType() != S->getType()) LHS = InsertNoopCastOfTo(LHS, S->getType()); return LHS; } Value *SCEVExpander::visitUMaxExpr(const SCEVUMaxExpr *S) { Value *LHS = expand(S->getOperand(S->getNumOperands()-1)); Type *Ty = LHS->getType(); for (int i = S->getNumOperands()-2; i >= 0; --i) { // In the case of mixed integer and pointer types, do the // rest of the comparisons as integer. if (S->getOperand(i)->getType() != Ty) { Ty = SE.getEffectiveSCEVType(Ty); LHS = InsertNoopCastOfTo(LHS, Ty); } Value *RHS = expandCodeFor(S->getOperand(i), Ty); Value *ICmp = Builder.CreateICmpUGT(LHS, RHS, "tmp"); rememberInstruction(ICmp); Value *Sel = Builder.CreateSelect(ICmp, LHS, RHS, "umax"); rememberInstruction(Sel); LHS = Sel; } // In the case of mixed integer and pointer types, cast the // final result back to the pointer type. if (LHS->getType() != S->getType()) LHS = InsertNoopCastOfTo(LHS, S->getType()); return LHS; } Value *SCEVExpander::expandCodeFor(const SCEV *SH, Type *Ty, Instruction *I) { BasicBlock::iterator IP = I; while (isInsertedInstruction(IP) || isa(IP)) ++IP; Builder.SetInsertPoint(IP->getParent(), IP); return expandCodeFor(SH, Ty); } Value *SCEVExpander::expandCodeFor(const SCEV *SH, Type *Ty) { // Expand the code for this SCEV. Value *V = expand(SH); if (Ty) { assert(SE.getTypeSizeInBits(Ty) == SE.getTypeSizeInBits(SH->getType()) && "non-trivial casts should be done with the SCEVs directly!"); V = InsertNoopCastOfTo(V, Ty); } return V; } Value *SCEVExpander::expand(const SCEV *S) { // Compute an insertion point for this SCEV object. Hoist the instructions // as far out in the loop nest as possible. Instruction *InsertPt = Builder.GetInsertPoint(); for (Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock()); ; L = L->getParentLoop()) if (SE.isLoopInvariant(S, L)) { if (!L) break; if (BasicBlock *Preheader = L->getLoopPreheader()) InsertPt = Preheader->getTerminator(); } else { // If the SCEV is computable at this level, insert it into the header // after the PHIs (and after any other instructions that we've inserted // there) so that it is guaranteed to dominate any user inside the loop. if (L && SE.hasComputableLoopEvolution(S, L) && !PostIncLoops.count(L)) InsertPt = L->getHeader()->getFirstInsertionPt(); while (isInsertedInstruction(InsertPt) || isa(InsertPt)) InsertPt = llvm::next(BasicBlock::iterator(InsertPt)); break; } // Check to see if we already expanded this here. std::map, AssertingVH >::iterator I = InsertedExpressions.find(std::make_pair(S, InsertPt)); if (I != InsertedExpressions.end()) return I->second; BasicBlock *SaveInsertBB = Builder.GetInsertBlock(); BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint(); Builder.SetInsertPoint(InsertPt->getParent(), InsertPt); // Expand the expression into instructions. Value *V = visit(S); // Remember the expanded value for this SCEV at this location. if (PostIncLoops.empty()) InsertedExpressions[std::make_pair(S, InsertPt)] = V; restoreInsertPoint(SaveInsertBB, SaveInsertPt); return V; } void SCEVExpander::rememberInstruction(Value *I) { if (!PostIncLoops.empty()) InsertedPostIncValues.insert(I); else InsertedValues.insert(I); // If we just claimed an existing instruction and that instruction had // been the insert point, adjust the insert point forward so that // subsequently inserted code will be dominated. if (Builder.GetInsertPoint() == I) { BasicBlock::iterator It = cast(I); do { ++It; } while (isInsertedInstruction(It) || isa(It)); Builder.SetInsertPoint(Builder.GetInsertBlock(), It); } } void SCEVExpander::restoreInsertPoint(BasicBlock *BB, BasicBlock::iterator I) { // If we acquired more instructions since the old insert point was saved, // advance past them. while (isInsertedInstruction(I) || isa(I)) ++I; Builder.SetInsertPoint(BB, I); } /// getOrInsertCanonicalInductionVariable - This method returns the /// canonical induction variable of the specified type for the specified /// loop (inserting one if there is none). A canonical induction variable /// starts at zero and steps by one on each iteration. PHINode * SCEVExpander::getOrInsertCanonicalInductionVariable(const Loop *L, Type *Ty) { assert(Ty->isIntegerTy() && "Can only insert integer induction variables!"); // Build a SCEV for {0,+,1}. // Conservatively use FlagAnyWrap for now. const SCEV *H = SE.getAddRecExpr(SE.getConstant(Ty, 0), SE.getConstant(Ty, 1), L, SCEV::FlagAnyWrap); // Emit code for it. BasicBlock *SaveInsertBB = Builder.GetInsertBlock(); BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint(); PHINode *V = cast(expandCodeFor(H, 0, L->getHeader()->begin())); if (SaveInsertBB) restoreInsertPoint(SaveInsertBB, SaveInsertPt); return V; }