RPCS3/llvm-mirror
1
0
Fork 0
mirror of https://github.com/RPCS3/llvm-mirror.git synced 2024-11-22 18:54:02 +01:00
Code Issues Projects Releases Wiki Activity
88aa158bd7
llvm-mirror/test/Transforms/LoopVectorize/induction.ll
Sanjay Patel d1a8bb697a [Vectorizers][TTI] remove option to bypass creation of vector reduction intrinsics 
The vector reduction intrinsics started life as experimental ops, so backend support
was lacking. As part of promoting them to 1st-class intrinsics, however, codegen
support was added/improved:
D58015
D90247

So I think it is safe to now remove this complication from IR.

Note that we still have an IR-level codegen expansion pass for these as discussed
in D95690. Removing that is another step in simplifying the logic. Also note that
x86 was already unconditionally forming reductions in IR, so there should be no
difference for x86.

I spot checked a couple of the tests here by running them through opt+llc and did
not see any asm diffs.

If we do find functional differences for other targets, it should be possible
to (at least temporarily) restore the shuffle IR with the ExpandReductions IR
pass.

Differential Revision: https://reviews.llvm.org/D96552
2021-02-12 08:13:50 -05:00

897 lines
35 KiB
LLVM
Raw Blame History

; RUN: opt < %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=2 -S | FileCheck %s
; RUN: opt < %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=2 -instcombine -S | FileCheck %s --check-prefix=IND
; RUN: opt < %s -loop-vectorize -force-vector-interleave=2 -force-vector-width=2 -instcombine -S | FileCheck %s --check-prefix=UNROLL
; RUN: opt < %s -loop-vectorize -force-vector-interleave=2 -force-vector-width=2 -S | FileCheck %s --check-prefix=UNROLL-NO-IC
; RUN: opt < %s -loop-vectorize -force-vector-interleave=2 -force-vector-width=4 -enable-interleaved-mem-accesses -instcombine -S | FileCheck %s --check-prefix=INTERLEAVE
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
; Make sure that we can handle multiple integer induction variables.
;
; CHECK-LABEL: @multi_int_induction(
; CHECK: vector.body:
; CHECK-NEXT: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; CHECK-NEXT: %vec.ind = phi <2 x i32> [ <i32 190, i32 191>, %vector.ph ], [ %vec.ind.next, %vector.body ]
; CHECK: [[TMP3:%.*]] = add i64 %index, 0
; CHECK-NEXT: [[TMP4:%.*]] = getelementptr inbounds i32, i32* %A, i64 [[TMP3]]
; CHECK-NEXT: [[TMP5:%.*]] = getelementptr inbounds i32, i32* [[TMP4]], i32 0
; CHECK-NEXT: [[TMP6:%.*]] = bitcast i32* [[TMP5]] to <2 x i32>*
; CHECK-NEXT: store <2 x i32> %vec.ind, <2 x i32>* [[TMP6]], align 4
; CHECK: %index.next = add i64 %index, 2
; CHECK-NEXT: %vec.ind.next = add <2 x i32> %vec.ind, <i32 2, i32 2>
; CHECK: br i1 {{.*}}, label %middle.block, label %vector.body
define void @multi_int_induction(i32* %A, i32 %N) {
for.body.lr.ph:
br label %for.body
for.body:
%indvars.iv = phi i64 [ 0, %for.body.lr.ph ], [ %indvars.iv.next, %for.body ]
%count.09 = phi i32 [ 190, %for.body.lr.ph ], [ %inc, %for.body ]
%arrayidx2 = getelementptr inbounds i32, i32* %A, i64 %indvars.iv
store i32 %count.09, i32* %arrayidx2, align 4
%inc = add nsw i32 %count.09, 1
%indvars.iv.next = add i64 %indvars.iv, 1
%lftr.wideiv = trunc i64 %indvars.iv.next to i32
%exitcond = icmp ne i32 %lftr.wideiv, %N
br i1 %exitcond, label %for.body, label %for.end
for.end:
ret void
}
; Make sure we remove unneeded vectorization of induction variables.
; In order for instcombine to cleanup the vectorized induction variables that we
; create in the loop vectorizer we need to perform some form of redundancy
; elimination to get rid of multiple uses.
; IND-LABEL: scalar_use
; IND: br label %vector.body
; IND: vector.body:
; Vectorized induction variable.
; IND-NOT: insertelement <2 x i64>
; IND-NOT: shufflevector <2 x i64>
; IND: br {{.*}}, label %vector.body
define void @scalar_use(float* %a, float %b, i64 %offset, i64 %offset2, i64 %n) {
entry:
br label %for.body
for.body:
%iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
%ind.sum = add i64 %iv, %offset
%arr.idx = getelementptr inbounds float, float* %a, i64 %ind.sum
%l1 = load float, float* %arr.idx, align 4
%ind.sum2 = add i64 %iv, %offset2
%arr.idx2 = getelementptr inbounds float, float* %a, i64 %ind.sum2
%l2 = load float, float* %arr.idx2, align 4
%m = fmul fast float %b, %l2
%ad = fadd fast float %l1, %m
store float %ad, float* %arr.idx, align 4
%iv.next = add nuw nsw i64 %iv, 1
%exitcond = icmp eq i64 %iv.next, %n
br i1 %exitcond, label %loopexit, label %for.body
loopexit:
ret void
}
; Make sure we don't create a vector induction phi node that is unused.
; Scalarize the step vectors instead.
;
; for (int i = 0; i < n; ++i)
; sum += a[i];
;
; CHECK-LABEL: @scalarize_induction_variable_01(
; CHECK: vector.body:
; CHECK: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; CHECK: %[[i0:.+]] = add i64 %index, 0
; CHECK: getelementptr inbounds i64, i64* %a, i64 %[[i0]]
;
; UNROLL-NO-IC-LABEL: @scalarize_induction_variable_01(
; UNROLL-NO-IC: vector.body:
; UNROLL-NO-IC: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; UNROLL-NO-IC: %[[i0:.+]] = add i64 %index, 0
; UNROLL-NO-IC: %[[i2:.+]] = add i64 %index, 2
; UNROLL-NO-IC: getelementptr inbounds i64, i64* %a, i64 %[[i0]]
; UNROLL-NO-IC: getelementptr inbounds i64, i64* %a, i64 %[[i2]]
;
; IND-LABEL: @scalarize_induction_variable_01(
; IND: vector.body:
; IND: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; IND-NOT: add i64 {{.*}}, 2
; IND: getelementptr inbounds i64, i64* %a, i64 %index
;
; UNROLL-LABEL: @scalarize_induction_variable_01(
; UNROLL: vector.body:
; UNROLL: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; UNROLL-NOT: add i64 {{.*}}, 4
; UNROLL: %[[g1:.+]] = getelementptr inbounds i64, i64* %a, i64 %index
; UNROLL: getelementptr inbounds i64, i64* %[[g1]], i64 2
define i64 @scalarize_induction_variable_01(i64 *%a, i64 %n) {
entry:
br label %for.body
for.body:
%i = phi i64 [ %i.next, %for.body ], [ 0, %entry ]
%sum = phi i64 [ %2, %for.body ], [ 0, %entry ]
%0 = getelementptr inbounds i64, i64* %a, i64 %i
%1 = load i64, i64* %0, align 8
%2 = add i64 %1, %sum
%i.next = add nuw nsw i64 %i, 1
%cond = icmp slt i64 %i.next, %n
br i1 %cond, label %for.body, label %for.end
for.end:
%3 = phi i64 [ %2, %for.body ]
ret i64 %3
}
; Make sure we scalarize the step vectors used for the pointer arithmetic. We
; can't easily simplify vectorized step vectors.
;
; float s = 0;
; for (int i ; 0; i < n; i += 8)
; s += (a[i] + b[i] + 1.0f);
;
; CHECK-LABEL: @scalarize_induction_variable_02(
; CHECK: vector.body:
; CHECK: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; CHECK: %offset.idx = mul i64 %index, 8
; CHECK: %[[i0:.+]] = add i64 %offset.idx, 0
; CHECK: %[[i1:.+]] = add i64 %offset.idx, 8
; CHECK: getelementptr inbounds float, float* %a, i64 %[[i0]]
; CHECK: getelementptr inbounds float, float* %a, i64 %[[i1]]
; CHECK: getelementptr inbounds float, float* %b, i64 %[[i0]]
; CHECK: getelementptr inbounds float, float* %b, i64 %[[i1]]
;
; UNROLL-NO-IC-LABEL: @scalarize_induction_variable_02(
; UNROLL-NO-IC: vector.body:
; UNROLL-NO-IC: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; UNROLL-NO-IC: %offset.idx = mul i64 %index, 8
; UNROLL-NO-IC: %[[i0:.+]] = add i64 %offset.idx, 0
; UNROLL-NO-IC: %[[i1:.+]] = add i64 %offset.idx, 8
; UNROLL-NO-IC: %[[i2:.+]] = add i64 %offset.idx, 16
; UNROLL-NO-IC: %[[i3:.+]] = add i64 %offset.idx, 24
; UNROLL-NO-IC: getelementptr inbounds float, float* %a, i64 %[[i0]]
; UNROLL-NO-IC: getelementptr inbounds float, float* %a, i64 %[[i1]]
; UNROLL-NO-IC: getelementptr inbounds float, float* %a, i64 %[[i2]]
; UNROLL-NO-IC: getelementptr inbounds float, float* %a, i64 %[[i3]]
; UNROLL-NO-IC: getelementptr inbounds float, float* %b, i64 %[[i0]]
; UNROLL-NO-IC: getelementptr inbounds float, float* %b, i64 %[[i1]]
; UNROLL-NO-IC: getelementptr inbounds float, float* %b, i64 %[[i2]]
; UNROLL-NO-IC: getelementptr inbounds float, float* %b, i64 %[[i3]]
;
; IND-LABEL: @scalarize_induction_variable_02(
; IND: vector.body:
; IND: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; IND: %[[i0:.+]] = shl i64 %index, 3
; IND: %[[i1:.+]] = or i64 %[[i0]], 8
; IND: getelementptr inbounds float, float* %a, i64 %[[i0]]
; IND: getelementptr inbounds float, float* %a, i64 %[[i1]]
;
; UNROLL-LABEL: @scalarize_induction_variable_02(
; UNROLL: vector.body:
; UNROLL: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; UNROLL: %[[i0:.+]] = shl i64 %index, 3
; UNROLL: %[[i1:.+]] = or i64 %[[i0]], 8
; UNROLL: %[[i2:.+]] = or i64 %[[i0]], 16
; UNROLL: %[[i3:.+]] = or i64 %[[i0]], 24
; UNROLL: getelementptr inbounds float, float* %a, i64 %[[i0]]
; UNROLL: getelementptr inbounds float, float* %a, i64 %[[i1]]
; UNROLL: getelementptr inbounds float, float* %a, i64 %[[i2]]
; UNROLL: getelementptr inbounds float, float* %a, i64 %[[i3]]
define float @scalarize_induction_variable_02(float* %a, float* %b, i64 %n) {
entry:
br label %for.body
for.body:
%i = phi i64 [ 0, %entry ], [ %i.next, %for.body ]
%s = phi float [ 0.0, %entry ], [ %6, %for.body ]
%0 = getelementptr inbounds float, float* %a, i64 %i
%1 = load float, float* %0, align 4
%2 = getelementptr inbounds float, float* %b, i64 %i
%3 = load float, float* %2, align 4
%4 = fadd fast float %s, 1.0
%5 = fadd fast float %4, %1
%6 = fadd fast float %5, %3
%i.next = add nuw nsw i64 %i, 8
%cond = icmp slt i64 %i.next, %n
br i1 %cond, label %for.body, label %for.end
for.end:
%s.lcssa = phi float [ %6, %for.body ]
ret float %s.lcssa
}
; Make sure we scalarize the step vectors used for the pointer arithmetic. We
; can't easily simplify vectorized step vectors. (Interleaved accesses.)
;
; for (int i = 0; i < n; ++i)
; a[i].f ^= y;
;
; INTERLEAVE-LABEL: @scalarize_induction_variable_03(
; INTERLEAVE: vector.body:
; INTERLEAVE: %[[i0:.+]] = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; INTERLEAVE: %[[i1:.+]] = or i64 %[[i0]], 1
; INTERLEAVE: %[[i2:.+]] = or i64 %[[i0]], 2
; INTERLEAVE: %[[i3:.+]] = or i64 %[[i0]], 3
; INTERLEAVE: %[[i4:.+]] = or i64 %[[i0]], 4
; INTERLEAVE: %[[i5:.+]] = or i64 %[[i0]], 5
; INTERLEAVE: %[[i6:.+]] = or i64 %[[i0]], 6
; INTERLEAVE: %[[i7:.+]] = or i64 %[[i0]], 7
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i0]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i1]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i2]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i3]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i4]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i5]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i6]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i7]], i32 1
%pair.i32 = type { i32, i32 }
define void @scalarize_induction_variable_03(%pair.i32 *%p, i32 %y, i64 %n) {
entry:
br label %for.body
for.body:
%i = phi i64 [ %i.next, %for.body ], [ 0, %entry ]
%f = getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %i, i32 1
%0 = load i32, i32* %f, align 8
%1 = xor i32 %0, %y
store i32 %1, i32* %f, align 8
%i.next = add nuw nsw i64 %i, 1
%cond = icmp slt i64 %i.next, %n
br i1 %cond, label %for.body, label %for.end
for.end:
ret void
}
; Make sure we scalarize the step vectors used for the pointer arithmetic. We
; can't easily simplify vectorized step vectors. (Interleaved accesses.)
;
; for (int i = 0; i < n; ++i)
; p[i].f = a[i * 4]
;
; INTERLEAVE-LABEL: @scalarize_induction_variable_04(
; INTERLEAVE: vector.body:
; INTERLEAVE: %[[i0:.+]] = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; INTERLEAVE: %[[i1:.+]] = or i64 %[[i0]], 1
; INTERLEAVE: %[[i2:.+]] = or i64 %[[i0]], 2
; INTERLEAVE: %[[i3:.+]] = or i64 %[[i0]], 3
; INTERLEAVE: %[[i4:.+]] = or i64 %[[i0]], 4
; INTERLEAVE: %[[i5:.+]] = or i64 %[[i0]], 5
; INTERLEAVE: %[[i6:.+]] = or i64 %[[i0]], 6
; INTERLEAVE: %[[i7:.+]] = or i64 %[[i0]], 7
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i0]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i1]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i2]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i3]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i4]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i5]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i6]], i32 1
; INTERLEAVE: getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %[[i7]], i32 1
define void @scalarize_induction_variable_04(i32* %a, %pair.i32* %p, i32 %n) {
entry:
br label %for.body
for.body:
%i = phi i64 [ %i.next, %for.body ], [ 0, %entry]
%0 = shl nsw i64 %i, 2
%1 = getelementptr inbounds i32, i32* %a, i64 %0
%2 = load i32, i32* %1, align 1
%3 = getelementptr inbounds %pair.i32, %pair.i32* %p, i64 %i, i32 1
store i32 %2, i32* %3, align 1
%i.next = add nuw nsw i64 %i, 1
%4 = trunc i64 %i.next to i32
%cond = icmp eq i32 %4, %n
br i1 %cond, label %for.end, label %for.body
for.end:
ret void
}
; PR30542. Ensure we generate all the scalar steps for the induction variable.
; The scalar induction variable is used by a getelementptr instruction
; (uniform), and a udiv (non-uniform).
;
; int sum = 0;
; for (int i = 0; i < n; ++i) {
; int x = a[i];
; if (c)
; x /= i;
; sum += x;
; }
;
; CHECK-LABEL: @scalarize_induction_variable_05(
; CHECK: vector.body:
; CHECK: %index = phi i32 [ 0, %vector.ph ], [ %index.next, %pred.udiv.continue{{[0-9]+}} ]
; CHECK: %[[I0:.+]] = add i32 %index, 0
; CHECK: getelementptr inbounds i32, i32* %a, i32 %[[I0]]
; CHECK: pred.udiv.if:
; CHECK: udiv i32 {{.*}}, %[[I0]]
; CHECK: pred.udiv.if{{[0-9]+}}:
; CHECK: %[[I1:.+]] = add i32 %index, 1
; CHECK: udiv i32 {{.*}}, %[[I1]]
;
; UNROLL-NO_IC-LABEL: @scalarize_induction_variable_05(
; UNROLL-NO-IC: vector.body:
; UNROLL-NO-IC: %index = phi i32 [ 0, %vector.ph ], [ %index.next, %pred.udiv.continue{{[0-9]+}} ]
; UNROLL-NO-IC: %[[I0:.+]] = add i32 %index, 0
; UNROLL-NO-IC: %[[I2:.+]] = add i32 %index, 2
; UNROLL-NO-IC: getelementptr inbounds i32, i32* %a, i32 %[[I0]]
; UNROLL-NO-IC: getelementptr inbounds i32, i32* %a, i32 %[[I2]]
; UNROLL-NO-IC: pred.udiv.if:
; UNROLL-NO-IC: udiv i32 {{.*}}, %[[I0]]
; UNROLL-NO-IC: pred.udiv.if{{[0-9]+}}:
; UNROLL-NO-IC: %[[I1:.+]] = add i32 %index, 1
; UNROLL-NO-IC: udiv i32 {{.*}}, %[[I1]]
; UNROLL-NO-IC: pred.udiv.if{{[0-9]+}}:
; UNROLL-NO-IC: udiv i32 {{.*}}, %[[I2]]
; UNROLL-NO-IC: pred.udiv.if{{[0-9]+}}:
; UNROLL-NO-IC: %[[I3:.+]] = add i32 %index, 3
; UNROLL-NO-IC: udiv i32 {{.*}}, %[[I3]]
;
; IND-LABEL: @scalarize_induction_variable_05(
; IND: vector.body:
; IND: %index = phi i32 [ 0, %vector.ph ], [ %index.next, %pred.udiv.continue{{[0-9]+}} ]
; IND: %[[E0:.+]] = sext i32 %index to i64
; IND: getelementptr inbounds i32, i32* %a, i64 %[[E0]]
; IND: pred.udiv.if:
; IND: udiv i32 {{.*}}, %index
; IND: pred.udiv.if{{[0-9]+}}:
; IND: %[[I1:.+]] = or i32 %index, 1
; IND: udiv i32 {{.*}}, %[[I1]]
;
; UNROLL-LABEL: @scalarize_induction_variable_05(
; UNROLL: vector.body:
; UNROLL: %index = phi i32 [ 0, %vector.ph ], [ %index.next, %pred.udiv.continue{{[0-9]+}} ]
; UNROLL: %[[I2:.+]] = or i32 %index, 2
; UNROLL: %[[E0:.+]] = sext i32 %index to i64
; UNROLL: %[[G0:.+]] = getelementptr inbounds i32, i32* %a, i64 %[[E0]]
; UNROLL: getelementptr inbounds i32, i32* %[[G0]], i64 2
; UNROLL: pred.udiv.if:
; UNROLL: udiv i32 {{.*}}, %index
; UNROLL: pred.udiv.if{{[0-9]+}}:
; UNROLL: %[[I1:.+]] = or i32 %index, 1
; UNROLL: udiv i32 {{.*}}, %[[I1]]
; UNROLL: pred.udiv.if{{[0-9]+}}:
; UNROLL: udiv i32 {{.*}}, %[[I2]]
; UNROLL: pred.udiv.if{{[0-9]+}}:
; UNROLL: %[[I3:.+]] = or i32 %index, 3
; UNROLL: udiv i32 {{.*}}, %[[I3]]
define i32 @scalarize_induction_variable_05(i32* %a, i32 %x, i1 %c, i32 %n) {
entry:
br label %for.body
for.body:
%i = phi i32 [ 0, %entry ], [ %i.next, %if.end ]
%sum = phi i32 [ 0, %entry ], [ %tmp4, %if.end ]
%tmp0 = getelementptr inbounds i32, i32* %a, i32 %i
%tmp1 = load i32, i32* %tmp0, align 4
br i1 %c, label %if.then, label %if.end
if.then:
%tmp2 = udiv i32 %tmp1, %i
br label %if.end
if.end:
%tmp3 = phi i32 [ %tmp2, %if.then ], [ %tmp1, %for.body ]
%tmp4 = add i32 %tmp3, %sum
%i.next = add nuw nsw i32 %i, 1
%cond = icmp slt i32 %i.next, %n
br i1 %cond, label %for.body, label %for.end
for.end:
%tmp5 = phi i32 [ %tmp4, %if.end ]
ret i32 %tmp5
}
; Ensure we generate both a vector and a scalar induction variable. In this
; test, the induction variable is used by an instruction that will be
; vectorized (trunc) as well as an instruction that will remain in scalar form
; (gepelementptr).
;
; CHECK-LABEL: @iv_vector_and_scalar_users(
; CHECK: vector.body:
; CHECK: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; CHECK: %vec.ind = phi <2 x i64> [ <i64 0, i64 1>, %vector.ph ], [ %vec.ind.next, %vector.body ]
; CHECK: %vec.ind1 = phi <2 x i32> [ <i32 0, i32 1>, %vector.ph ], [ %vec.ind.next2, %vector.body ]
; CHECK: %[[i0:.+]] = add i64 %index, 0
; CHECK: %[[i1:.+]] = add i64 %index, 1
; CHECK: getelementptr inbounds %pair.i16, %pair.i16* %p, i64 %[[i0]], i32 1
; CHECK: getelementptr inbounds %pair.i16, %pair.i16* %p, i64 %[[i1]], i32 1
; CHECK: %index.next = add i64 %index, 2
; CHECK: %vec.ind.next = add <2 x i64> %vec.ind, <i64 2, i64 2>
; CHECK: %vec.ind.next2 = add <2 x i32> %vec.ind1, <i32 2, i32 2>
;
; IND-LABEL: @iv_vector_and_scalar_users(
; IND: vector.body:
; IND: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; IND: %vec.ind1 = phi <2 x i32> [ <i32 0, i32 1>, %vector.ph ], [ %vec.ind.next2, %vector.body ]
; IND: %[[i1:.+]] = or i64 %index, 1
; IND: getelementptr inbounds %pair.i16, %pair.i16* %p, i64 %index, i32 1
; IND: getelementptr inbounds %pair.i16, %pair.i16* %p, i64 %[[i1]], i32 1
; IND: %index.next = add i64 %index, 2
; IND: %vec.ind.next2 = add <2 x i32> %vec.ind1, <i32 2, i32 2>
;
; UNROLL-LABEL: @iv_vector_and_scalar_users(
; UNROLL: vector.body:
; UNROLL: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; UNROLL: %vec.ind2 = phi <2 x i32> [ <i32 0, i32 1>, %vector.ph ], [ %vec.ind.next5, %vector.body ]
; UNROLL: %[[i1:.+]] = or i64 %index, 1
; UNROLL: %[[i2:.+]] = or i64 %index, 2
; UNROLL: %[[i3:.+]] = or i64 %index, 3
; UNROLL: %[[add:.+]]= add <2 x i32> %[[splat:.+]], <i32 2, i32 poison>
; UNROLL: getelementptr inbounds %pair.i16, %pair.i16* %p, i64 %index, i32 1
; UNROLL: getelementptr inbounds %pair.i16, %pair.i16* %p, i64 %[[i1]], i32 1
; UNROLL: getelementptr inbounds %pair.i16, %pair.i16* %p, i64 %[[i2]], i32 1
; UNROLL: getelementptr inbounds %pair.i16, %pair.i16* %p, i64 %[[i3]], i32 1
; UNROLL: %index.next = add i64 %index, 4
; UNROLL: %vec.ind.next5 = add <2 x i32> %vec.ind2, <i32 4, i32 4>
%pair.i16 = type { i16, i16 }
define void @iv_vector_and_scalar_users(%pair.i16* %p, i32 %a, i32 %n) {
entry:
br label %for.body
for.body:
%i = phi i64 [ %i.next, %for.body ], [ 0, %entry ]
%0 = trunc i64 %i to i32
%1 = add i32 %a, %0
%2 = trunc i32 %1 to i16
%3 = getelementptr inbounds %pair.i16, %pair.i16* %p, i64 %i, i32 1
store i16 %2, i16* %3, align 2
%i.next = add nuw nsw i64 %i, 1
%4 = trunc i64 %i.next to i32
%cond = icmp eq i32 %4, %n
br i1 %cond, label %for.end, label %for.body
for.end:
ret void
}
; Make sure that the loop exit count computation does not overflow for i8 and
; i16. The exit count of these loops is i8/i16 max + 1. If we don't cast the
; induction variable to a bigger type the exit count computation will overflow
; to 0.
; PR17532
; CHECK-LABEL: i8_loop
; CHECK: icmp eq i32 {{.*}}, 256
define i32 @i8_loop() nounwind readnone ssp uwtable {
br label %1
; <label>:1 ; preds = %1, %0
%a.0 = phi i32 [ 1, %0 ], [ %2, %1 ]
%b.0 = phi i8 [ 0, %0 ], [ %3, %1 ]
%2 = and i32 %a.0, 4
%3 = add i8 %b.0, -1
%4 = icmp eq i8 %3, 0
br i1 %4, label %5, label %1
; <label>:5 ; preds = %1
ret i32 %2
}
; CHECK-LABEL: i16_loop
; CHECK: icmp eq i32 {{.*}}, 65536
define i32 @i16_loop() nounwind readnone ssp uwtable {
br label %1
; <label>:1 ; preds = %1, %0
%a.0 = phi i32 [ 1, %0 ], [ %2, %1 ]
%b.0 = phi i16 [ 0, %0 ], [ %3, %1 ]
%2 = and i32 %a.0, 4
%3 = add i16 %b.0, -1
%4 = icmp eq i16 %3, 0
br i1 %4, label %5, label %1
; <label>:5 ; preds = %1
ret i32 %2
}
; This loop has a backedge taken count of i32_max. We need to check for this
; condition and branch directly to the scalar loop.
; CHECK-LABEL: max_i32_backedgetaken
; CHECK: br i1 true, label %scalar.ph, label %vector.ph
; CHECK: middle.block:
; CHECK: %[[v9:.+]] = call i32 @llvm.vector.reduce.and.v2i32(<2 x i32>
; CHECK: scalar.ph:
; CHECK: %bc.resume.val = phi i32 [ 0, %middle.block ], [ 0, %[[v0:.+]] ]
; CHECK: %bc.merge.rdx = phi i32 [ 1, %[[v0:.+]] ], [ %[[v9]], %middle.block ]
define i32 @max_i32_backedgetaken() nounwind readnone ssp uwtable {
br label %1
; <label>:1 ; preds = %1, %0
%a.0 = phi i32 [ 1, %0 ], [ %2, %1 ]
%b.0 = phi i32 [ 0, %0 ], [ %3, %1 ]
%2 = and i32 %a.0, 4
%3 = add i32 %b.0, -1
%4 = icmp eq i32 %3, 0
br i1 %4, label %5, label %1
; <label>:5 ; preds = %1
ret i32 %2
}
; When generating the overflow check we must sure that the induction start value
; is defined before the branch to the scalar preheader.
; CHECK-LABEL: testoverflowcheck
; CHECK: entry
; CHECK: %[[LOAD:.*]] = load i8
; CHECK: br
; CHECK: scalar.ph
; CHECK: phi i8 [ %{{.*}}, %middle.block ], [ %[[LOAD]], %entry ]
@e = global i8 1, align 1
@d = common global i32 0, align 4
@c = common global i32 0, align 4
define i32 @testoverflowcheck() {
entry:
%.pr.i = load i8, i8* @e, align 1
%0 = load i32, i32* @d, align 4
%c.promoted.i = load i32, i32* @c, align 4
br label %cond.end.i
cond.end.i:
%inc4.i = phi i8 [ %.pr.i, %entry ], [ %inc.i, %cond.end.i ]
%and3.i = phi i32 [ %c.promoted.i, %entry ], [ %and.i, %cond.end.i ]
%and.i = and i32 %0, %and3.i
%inc.i = add i8 %inc4.i, 1
%tobool.i = icmp eq i8 %inc.i, 0
br i1 %tobool.i, label %loopexit, label %cond.end.i
loopexit:
ret i32 %and.i
}
; The SCEV expression of %sphi is (zext i8 {%t,+,1}<%loop> to i32)
; In order to recognize %sphi as an induction PHI and vectorize this loop,
; we need to convert the SCEV expression into an AddRecExpr.
; The expression gets converted to {zext i8 %t to i32,+,1}.
; CHECK-LABEL: wrappingindvars1
; CHECK-LABEL: vector.scevcheck
; CHECK-LABEL: vector.ph
; CHECK: %[[START:.*]] = add <2 x i32> %{{.*}}, <i32 0, i32 1>
; CHECK-LABEL: vector.body
; CHECK: %[[PHI:.*]] = phi <2 x i32> [ %[[START]], %vector.ph ], [ %[[STEP:.*]], %vector.body ]
; CHECK: %[[STEP]] = add <2 x i32> %[[PHI]], <i32 2, i32 2>
define void @wrappingindvars1(i8 %t, i32 %len, i32 *%A) {
entry:
%st = zext i8 %t to i16
%ext = zext i8 %t to i32
%ecmp = icmp ult i16 %st, 42
br i1 %ecmp, label %loop, label %exit
loop:
%idx = phi i8 [ %t, %entry ], [ %idx.inc, %loop ]
%idx.b = phi i32 [ 0, %entry ], [ %idx.b.inc, %loop ]
%sphi = phi i32 [ %ext, %entry ], [%idx.inc.ext, %loop]
%ptr = getelementptr inbounds i32, i32* %A, i8 %idx
store i32 %sphi, i32* %ptr
%idx.inc = add i8 %idx, 1
%idx.inc.ext = zext i8 %idx.inc to i32
%idx.b.inc = add nuw nsw i32 %idx.b, 1
%c = icmp ult i32 %idx.b, %len
br i1 %c, label %loop, label %exit
exit:
ret void
}
; The SCEV expression of %sphi is (4 * (zext i8 {%t,+,1}<%loop> to i32))
; In order to recognize %sphi as an induction PHI and vectorize this loop,
; we need to convert the SCEV expression into an AddRecExpr.
; The expression gets converted to ({4 * (zext %t to i32),+,4}).
; CHECK-LABEL: wrappingindvars2
; CHECK-LABEL: vector.scevcheck
; CHECK-LABEL: vector.ph
; CHECK: %[[START:.*]] = add <2 x i32> %{{.*}}, <i32 0, i32 4>
; CHECK-LABEL: vector.body
; CHECK: %[[PHI:.*]] = phi <2 x i32> [ %[[START]], %vector.ph ], [ %[[STEP:.*]], %vector.body ]
; CHECK: %[[STEP]] = add <2 x i32> %[[PHI]], <i32 8, i32 8>
define void @wrappingindvars2(i8 %t, i32 %len, i32 *%A) {
entry:
%st = zext i8 %t to i16
%ext = zext i8 %t to i32
%ext.mul = mul i32 %ext, 4
%ecmp = icmp ult i16 %st, 42
br i1 %ecmp, label %loop, label %exit
loop:
%idx = phi i8 [ %t, %entry ], [ %idx.inc, %loop ]
%sphi = phi i32 [ %ext.mul, %entry ], [%mul, %loop]
%idx.b = phi i32 [ 0, %entry ], [ %idx.b.inc, %loop ]
%ptr = getelementptr inbounds i32, i32* %A, i8 %idx
store i32 %sphi, i32* %ptr
%idx.inc = add i8 %idx, 1
%idx.inc.ext = zext i8 %idx.inc to i32
%mul = mul i32 %idx.inc.ext, 4
%idx.b.inc = add nuw nsw i32 %idx.b, 1
%c = icmp ult i32 %idx.b, %len
br i1 %c, label %loop, label %exit
exit:
ret void
}
; Check that we generate vectorized IVs in the pre-header
; instead of widening the scalar IV inside the loop, when
; we know how to do that.
; IND-LABEL: veciv
; IND: vector.body:
; IND: %index = phi i32 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; IND: %vec.ind = phi <2 x i32> [ <i32 0, i32 1>, %vector.ph ], [ %vec.ind.next, %vector.body ]
; IND: %index.next = add i32 %index, 2
; IND: %vec.ind.next = add <2 x i32> %vec.ind, <i32 2, i32 2>
; IND: %[[CMP:.*]] = icmp eq i32 %index.next
; IND: br i1 %[[CMP]]
; UNROLL-LABEL: veciv
; UNROLL: vector.body:
; UNROLL: %index = phi i32 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; UNROLL: %vec.ind = phi <2 x i32> [ <i32 0, i32 1>, %vector.ph ], [ %vec.ind.next, %vector.body ]
; UNROLL: %step.add = add <2 x i32> %vec.ind, <i32 2, i32 2>
; UNROLL: %index.next = add i32 %index, 4
; UNROLL: %vec.ind.next = add <2 x i32> %vec.ind, <i32 4, i32 4>
; UNROLL: %[[CMP:.*]] = icmp eq i32 %index.next
; UNROLL: br i1 %[[CMP]]
define void @veciv(i32* nocapture %a, i32 %start, i32 %k) {
for.body.preheader:
br label %for.body
for.body:
%indvars.iv = phi i32 [ %indvars.iv.next, %for.body ], [ 0, %for.body.preheader ]
%arrayidx = getelementptr inbounds i32, i32* %a, i32 %indvars.iv
store i32 %indvars.iv, i32* %arrayidx, align 4
%indvars.iv.next = add nuw nsw i32 %indvars.iv, 1
%exitcond = icmp eq i32 %indvars.iv.next, %k
br i1 %exitcond, label %exit, label %for.body
exit:
ret void
}
; IND-LABEL: trunciv
; IND: vector.body:
; IND: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; IND: %[[VECIND:.*]] = phi <2 x i32> [ <i32 0, i32 1>, %vector.ph ], [ %[[STEPADD:.*]], %vector.body ]
; IND: %index.next = add i64 %index, 2
; IND: %[[STEPADD]] = add <2 x i32> %[[VECIND]], <i32 2, i32 2>
; IND: %[[CMP:.*]] = icmp eq i64 %index.next
; IND: br i1 %[[CMP]]
define void @trunciv(i32* nocapture %a, i32 %start, i64 %k) {
for.body.preheader:
br label %for.body
for.body:
%indvars.iv = phi i64 [ %indvars.iv.next, %for.body ], [ 0, %for.body.preheader ]
%trunc.iv = trunc i64 %indvars.iv to i32
%arrayidx = getelementptr inbounds i32, i32* %a, i32 %trunc.iv
store i32 %trunc.iv, i32* %arrayidx, align 4
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
%exitcond = icmp eq i64 %indvars.iv.next, %k
br i1 %exitcond, label %exit, label %for.body
exit:
ret void
}
; CHECK-LABEL: @nonprimary(
; CHECK: vector.ph:
; CHECK: %[[INSERT:.*]] = insertelement <2 x i32> poison, i32 %i, i32 0
; CHECK: %[[SPLAT:.*]] = shufflevector <2 x i32> %[[INSERT]], <2 x i32> poison, <2 x i32> zeroinitializer
; CHECK: %[[START:.*]] = add <2 x i32> %[[SPLAT]], <i32 0, i32 1>
; CHECK: vector.body:
; CHECK: %index = phi i32 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; CHECK: %vec.ind = phi <2 x i32> [ %[[START]], %vector.ph ], [ %vec.ind.next, %vector.body ]
; CHECK: %offset.idx = add i32 %i, %index
; CHECK: %[[A1:.*]] = add i32 %offset.idx, 0
; CHECK: %[[G1:.*]] = getelementptr inbounds i32, i32* %a, i32 %[[A1]]
; CHECK: %[[G3:.*]] = getelementptr inbounds i32, i32* %[[G1]], i32 0
; CHECK: %[[B1:.*]] = bitcast i32* %[[G3]] to <2 x i32>*
; CHECK: store <2 x i32> %vec.ind, <2 x i32>* %[[B1]]
; CHECK: %index.next = add i32 %index, 2
; CHECK: %vec.ind.next = add <2 x i32> %vec.ind, <i32 2, i32 2>
; CHECK: %[[CMP:.*]] = icmp eq i32 %index.next, %n.vec
; CHECK: br i1 %[[CMP]]
;
; IND-LABEL: @nonprimary(
; IND: vector.ph:
; IND: %[[INSERT:.*]] = insertelement <2 x i32> poison, i32 %i, i32 0
; IND: %[[SPLAT:.*]] = shufflevector <2 x i32> %[[INSERT]], <2 x i32> poison, <2 x i32> zeroinitializer
; IND: %[[START:.*]] = add <2 x i32> %[[SPLAT]], <i32 0, i32 1>
; IND: vector.body:
; IND: %index = phi i32 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; IND: %vec.ind = phi <2 x i32> [ %[[START]], %vector.ph ], [ %vec.ind.next, %vector.body ]
; IND: %[[A1:.*]] = add i32 %index, %i
; IND: %[[S1:.*]] = sext i32 %[[A1]] to i64
; IND: %[[G1:.*]] = getelementptr inbounds i32, i32* %a, i64 %[[S1]]
; IND: %[[B1:.*]] = bitcast i32* %[[G1]] to <2 x i32>*
; IND: store <2 x i32> %vec.ind, <2 x i32>* %[[B1]]
; IND: %index.next = add i32 %index, 2
; IND: %vec.ind.next = add <2 x i32> %vec.ind, <i32 2, i32 2>
; IND: %[[CMP:.*]] = icmp eq i32 %index.next, %n.vec
; IND: br i1 %[[CMP]]
;
; UNROLL-LABEL: @nonprimary(
; UNROLL: vector.ph:
; UNROLL: %[[INSERT:.*]] = insertelement <2 x i32> poison, i32 %i, i32 0
; UNROLL: %[[SPLAT:.*]] = shufflevector <2 x i32> %[[INSERT]], <2 x i32> poison, <2 x i32> zeroinitializer
; UNROLL: %[[START:.*]] = add <2 x i32> %[[SPLAT]], <i32 0, i32 1>
; UNROLL: vector.body:
; UNROLL: %index = phi i32 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; UNROLL: %vec.ind = phi <2 x i32> [ %[[START]], %vector.ph ], [ %vec.ind.next, %vector.body ]
; UNROLL: %step.add = add <2 x i32> %vec.ind, <i32 2, i32 2>
; UNROLL: %[[A1:.*]] = add i32 %index, %i
; UNROLL: %[[S1:.*]] = sext i32 %[[A1]] to i64
; UNROLL: %[[G1:.*]] = getelementptr inbounds i32, i32* %a, i64 %[[S1]]
; UNROLL: %[[B1:.*]] = bitcast i32* %[[G1]] to <2 x i32>*
; UNROLL: store <2 x i32> %vec.ind, <2 x i32>* %[[B1]]
; UNROLL: %[[G2:.*]] = getelementptr inbounds i32, i32* %[[G1]], i64 2
; UNROLL: %[[B2:.*]] = bitcast i32* %[[G2]] to <2 x i32>*
; UNROLL: store <2 x i32> %step.add, <2 x i32>* %[[B2]]
; UNROLL: %index.next = add i32 %index, 4
; UNROLL: %vec.ind.next = add <2 x i32> %vec.ind, <i32 4, i32 4>
; UNROLL: %[[CMP:.*]] = icmp eq i32 %index.next, %n.vec
; UNROLL: br i1 %[[CMP]]
define void @nonprimary(i32* nocapture %a, i32 %start, i32 %i, i32 %k) {
for.body.preheader:
br label %for.body
for.body:
%indvars.iv = phi i32 [ %indvars.iv.next, %for.body ], [ %i, %for.body.preheader ]
%arrayidx = getelementptr inbounds i32, i32* %a, i32 %indvars.iv
store i32 %indvars.iv, i32* %arrayidx, align 4
%indvars.iv.next = add nuw nsw i32 %indvars.iv, 1
%exitcond = icmp eq i32 %indvars.iv.next, %k
br i1 %exitcond, label %exit, label %for.body
exit:
ret void
}
; CHECK-LABEL: @non_primary_iv_trunc(
; CHECK: vector.body:
; CHECK-NEXT: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; CHECK: [[VEC_IND:%.*]] = phi <2 x i32> [ <i32 0, i32 2>, %vector.ph ], [ [[VEC_IND_NEXT:%.*]], %vector.body ]
; CHECK: [[TMP3:%.*]] = add i64 %index, 0
; CHECK-NEXT: [[TMP4:%.*]] = getelementptr inbounds i32, i32* %a, i64 [[TMP3]]
; CHECK-NEXT: [[TMP5:%.*]] = getelementptr inbounds i32, i32* [[TMP4]], i32 0
; CHECK-NEXT: [[TMP6:%.*]] = bitcast i32* [[TMP5]] to <2 x i32>*
; CHECK-NEXT: store <2 x i32> [[VEC_IND]], <2 x i32>* [[TMP6]], align 4
; CHECK-NEXT: %index.next = add i64 %index, 2
; CHECK: [[VEC_IND_NEXT]] = add <2 x i32> [[VEC_IND]], <i32 4, i32 4>
; CHECK: br i1 {{.*}}, label %middle.block, label %vector.body
define void @non_primary_iv_trunc(i32* %a, i64 %n) {
entry:
br label %for.body
for.body:
%i = phi i64 [ %i.next, %for.body ], [ 0, %entry ]
%j = phi i64 [ %j.next, %for.body ], [ 0, %entry ]
%tmp0 = getelementptr inbounds i32, i32* %a, i64 %i
%tmp1 = trunc i64 %j to i32
store i32 %tmp1, i32* %tmp0, align 4
%i.next = add nuw nsw i64 %i, 1
%j.next = add nuw nsw i64 %j, 2
%cond = icmp slt i64 %i.next, %n
br i1 %cond, label %for.body, label %for.end
for.end:
ret void
}
; PR32419. Ensure we transform truncated non-primary induction variables. In
; the test case below we replace %tmp1 with a new induction variable. Because
; the truncated value is non-primary, we must compute an offset from the
; primary induction variable.
;
; CHECK-LABEL: @PR32419(
; CHECK: vector.body:
; CHECK-NEXT: [[INDEX:%.*]] = phi i32 [ 0, %vector.ph ], [ [[INDEX_NEXT:%.*]], %[[PRED_UREM_CONTINUE4:.*]] ]
; CHECK: [[OFFSET_IDX:%.*]] = add i32 -20, [[INDEX]]
; CHECK-NEXT: [[TMP1:%.*]] = trunc i32 [[OFFSET_IDX]] to i16
; CHECK: [[TMP8:%.*]] = add i16 [[TMP1]], 0
; CHECK-NEXT: [[TMP9:%.*]] = urem i16 %b, [[TMP8]]
; CHECK: [[TMP15:%.*]] = add i16 [[TMP1]], 1
; CHECK-NEXT: [[TMP16:%.*]] = urem i16 %b, [[TMP15]]
; CHECK: [[PRED_UREM_CONTINUE4]]:
; CHECK: br i1 {{.*}}, label %middle.block, label %vector.body
;
define i32 @PR32419(i32 %a, i16 %b) {
entry:
br label %for.body
for.body:
%i = phi i32 [ -20, %entry ], [ %i.next, %for.inc ]
%tmp0 = phi i32 [ %a, %entry ], [ %tmp6, %for.inc ]
%tmp1 = trunc i32 %i to i16
%tmp2 = icmp eq i16 %tmp1, 0
br i1 %tmp2, label %for.inc, label %for.cond
for.cond:
%tmp3 = urem i16 %b, %tmp1
br label %for.inc
for.inc:
%tmp4 = phi i16 [ %tmp3, %for.cond ], [ 0, %for.body ]
%tmp5 = sext i16 %tmp4 to i32
%tmp6 = or i32 %tmp0, %tmp5
%i.next = add nsw i32 %i, 1
%cond = icmp eq i32 %i.next, 0
br i1 %cond, label %for.end, label %for.body
for.end:
%tmp7 = phi i32 [ %tmp6, %for.inc ]
ret i32 %tmp7
}
; Ensure that the shuffle vector for first order recurrence is inserted
; correctly after all the phis. These new phis correspond to new IVs
; that are generated by optimizing non-free truncs of IVs to IVs themselves
define i64 @trunc_with_first_order_recurrence() {
; CHECK-LABEL: trunc_with_first_order_recurrence
; CHECK-LABEL: vector.body:
; CHECK-NEXT: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; CHECK-NEXT: %vec.phi = phi <2 x i64>
; CHECK-NEXT: %vec.ind = phi <2 x i64> [ <i64 1, i64 2>, %vector.ph ], [ %vec.ind.next, %vector.body ]
; CHECK-NEXT: %vec.ind2 = phi <2 x i32> [ <i32 1, i32 2>, %vector.ph ], [ %vec.ind.next3, %vector.body ]
; CHECK-NEXT: %vector.recur = phi <2 x i32> [ <i32 poison, i32 42>, %vector.ph ], [ %vec.ind5, %vector.body ]
; CHECK-NEXT: %vec.ind5 = phi <2 x i32> [ <i32 1, i32 2>, %vector.ph ], [ %vec.ind.next6, %vector.body ]
; CHECK-NEXT: %vec.ind7 = phi <2 x i32> [ <i32 1, i32 2>, %vector.ph ], [ %vec.ind.next8, %vector.body ]
; CHECK-NEXT: shufflevector <2 x i32> %vector.recur, <2 x i32> %vec.ind5, <2 x i32> <i32 1, i32 2>
entry:
br label %loop
exit: ; preds = %loop
%.lcssa = phi i64 [ %c23, %loop ]
ret i64 %.lcssa
loop: ; preds = %loop, %entry
%c5 = phi i64 [ %c23, %loop ], [ 0, %entry ]
%indvars.iv = phi i64 [ %indvars.iv.next, %loop ], [ 1, %entry ]
%x = phi i32 [ %c24, %loop ], [ 1, %entry ]
%y = phi i32 [ %c6, %loop ], [ 42, %entry ]
%c6 = trunc i64 %indvars.iv to i32
%c8 = mul i32 %x, %c6
%c9 = add i32 %c8, 42
%c10 = add i32 %y, %c6
%c11 = add i32 %c10, %c9
%c12 = sext i32 %c11 to i64
%c13 = add i64 %c5, %c12
%indvars.iv.tr = trunc i64 %indvars.iv to i32
%c14 = shl i32 %indvars.iv.tr, 1
%c15 = add i32 %c9, %c14
%c16 = sext i32 %c15 to i64
%c23 = add i64 %c13, %c16
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
%c24 = add nuw nsw i32 %x, 1
%exitcond.i = icmp eq i64 %indvars.iv.next, 114
br i1 %exitcond.i, label %exit, label %loop
}
Reference in New Issue View Git Blame Copy Permalink