Fri Jul 19 18:56:14 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * cse.c (canon_reg): Allow for recursive call returning 0 (if we had an EXPR_LIST). * sched.c (init_aliases_analysis): Ignore REG_EQUAL note when its value is an EXPR_LIST. * unroll.c (loop_iterations): Likewise. * rs6000.md (andsi3): Fix typo in and-with-cc pattern. Fri Jul 19 11:23:22 1991 Tom Wood (wood at dg-rtp.dg.com) * toplev.c (set_target_switch): For TARGET_OPTIONS, set the variable to the variable part of the actual option. * tm-m88k.h, out-m88k.c: Change the use of m88k_short_data. * varasm.c (output_constant_def): Merge get_or_assign_label and delete it. Ensure that ENCODE_SEGMENT_INFO is evaluated before SELECT_SECTION. Thu Jul 18 19:57:45 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * expr.h (MUST_PASS_IN_STACK_BAD_PADDING): Definitions were backwards. Thu Jul 18 17:52:46 1991 Jim Wilson (wilson at wookumz.gnu.ai.mit.edu) * unroll.c: Fix typos in comments. (splittable_regs_updates): New static global variable. Indicates the number of instructions that modify a split biv remaining during the last iteration of a loop, so that the last one can be handled specially. (unroll_loop): Allocate and clear it. (copy_loop_body): Use it to determine how to rewrite an insn modifying a split iv. (find_splittable_regs): When a splittable biv is identified, set it equal to the number of insn modifying the biv. (find_splittable_givs): When a splittable giv is identified, set it to one if this giv is a reg. * unroll.c (copy_loop_body): Instead of trying to special case insns that use start_label, use the label_map to map the start label to the appropriate label for all insns except those that must be inverted and redirected. The former code did not handle tablejumps that used the start_label correctly. * integrate.c (copy_rtx_and_substitute): Don't legitimize an address inside of an ADDRESS rtx. This fails, because this need not be a validate address, but it is always valid in the context it appears in. Thu Jul 18 08:13:56 1991 Tom Wood (wood at dg-rtp.dg.com) * toplev.c (set_target_switch): Support TARGET_OPTIONS for command options with values. * varasm.c (output_constant_def): Set flags with ENCODE_SEGMENT_INFO for strings and constructors. * tm-mips.h (ENCODE_SEGMENT_INFO): Must be a VAR_DECL. * out-m88k.c, tm-m88k.h, m88k.md: Implement a global pool approach to short addressing. * m88k.md (extendsfdf2, truncdfsf2): Use fsub rather than fadd. This conforms to IEEE 754 in all rounding modes except round to negative infinity whereas fadd conforms only in that mode. Thu Jul 18 01:01:37 1991 Eric Youngdale (youngdale at v6550c.nrl.navy.mil) * make-cc1.com: Add command line to compile reg-stack.c, and add reg-stack.obj to the list of files passed to the VMS linker. Thu Jul 18 00:11:00 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * Makefile.in (enquire.o): Need not depend on gnulib. (gnulib2): Renamed from gnulib2.portable. Don't do ranlib. (gnulib2.portable): Just refers to gnulib2. (gnulib1.portable): Don't do ranlib. Wed Jul 17 11:19:09 1991 Michael Meissner (meissner at geech.gnu.ai.mit.edu) * Makefile.in (gcc): Do a -dumpspecs after building gcc so that -B./ will override any installed specs in /usr/local/lib. (mostlyclean): Delete *.cpp files which are left if you use -save-temps. Wed Jul 17 06:08:33 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * combine.c (try_combine): When putting I2 and/or I1 into NEWPAT, check for a PARALLEL; if so, just put in the relevant SET instead of making a PARALLEL containing a PARALLEL. Tue Jul 16 18:58:51 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * combine.c (record_value_for_reg): Show we haven't seen the death of a register once we have seen it modified. * reload1.c (reload): If we decide to put a pseudo which used to have a MEM equiv onto the stack, set SOMETHING_CHANGED and reprocess all eliminations and pseudos without scanning the insns. Tue Jul 16 13:17:14 1991 Michael Meissner (meissner at wookumz.gnu.ai.mit.edu) * cplus-decl.c (sigsegv): Make signal handler void for full prototyping systems. Tue Jul 16 12:25:18 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * dbxout.c (dbxout_symbol): Ignore types with no names of any kind. Tue Jul 16 07:12:52 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * stmt.c (pushcase, pushcase_range): Return label in *DUPLICATE, not integer value. * rtlanal.c (reg_referenced_p, reg_overlap_mentioned_p): Allow X to be (cc0) or (pc). * combine.c (subst, case SET): Delete code to remove "unnecessary" SUBREG; code was incorrect and this is done (corrected below) in simplify_comparison. (simplify_comparison): Can only remove SUBREG for equality comparisons. * expr.c (expand_expr, case COND_EXPR): If condition has side effects, ensure we evaluate it before evaluating an arm of the COND_EXPR. Mon Jul 15 21:59:36 1991 James Van Artsdalen (james at bigtex.cactus.org) * rtl.h (FUNCTION_FLAGS_RETURNS_STRUCT): Fix typo in value. Mon Jul 15 22:18:40 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * cccp.c (main): Ignore CPATH if -nostdinc. Mon Jul 15 22:00:02 1991 Michael Meissner (meissner at churchy.gnu.ai.mit.edu) * reload.c (find_reloads): Fix typo (reg_sets_p instead of reg_set_p). Mon Jul 15 21:49:09 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * c-parse.y (stmt): Emit the nop for the start of a loop only after the line number. Mon Jul 15 16:50:51 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edn) * rtlanal.c (reg_set_p): If we are passed an insn, only pass the pattern to note_stores. * local-alloc.c (validate_equiv_mem): A CALL_INSN invalidates all memory. Sun Jul 14 06:34:47 1991 Richard Kenner (kenner at vlsi1.ultra.hyu.edu) * cse.c (last_jump_equiv_class): New variable. (record_jump_equiv): Set it. (cse_insn): Clear it. (cse_around_loop): Invalidate all entries in last_jump_equiv_class. (cse_set_around_loop): Ensure our replacement is cheaper. Sat Jul 13 17:15:30 1991 James Van Artsdalen (james at bigtex.cactus.org) * cplus-decl.c (finish_enum): Fix typo in arguments for finish_decl. * cplus-class.c (finish_struct): Likewise. Fri Jul 12 16:45:02 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * dbxout.c (dbxout_symbol): Don't crash when DECL_NAME is 0. Fri Jul 12 15:38:24 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * expr.c (do_tablejump): Don't write BARRIER between jump and table if they must remain adjacent. * varasm.c (make_decl_rtl): Set REG_USERVAR_P when register name is specified. * integrate.c (subst_constants): Don't substitute for a user variable assigned to a hard register. * reload.c (find_reloads): Add new vars no_{input,output}_reloads to indicate when the corresponding reload type is not permitted; reject an alternative that would try such a reload. * rs6000.md (decrement-and-branch): No longer need kludges to avoid output reloads. Use '0' instead of 'c' for input 1 in alternative 0. Allow operand 0 to be in non-general register. Fri Jul 12 10:54:39 1991 James Van Artsdalen (james at bigtex.cactus.org) * c-decl.c (finish_struct, finish_enum): Fix typo in arguments for finish_decl. * i386.md (bit test patterns): Delete bit tests using implicitly masked bit number operand: the hardware doesn't work like that. Fri Jul 12 09:50:43 1991 Michael Meissner (meissner at spiff.gnu.ai.mit.edu) * tm-hp9k2bsd.h (toplevel): Remove RCS HISTORY log. Thu Jul 11 00:46:48 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * c-parse.y (yylex): Do try signed int for ANSI nondecimal constants. * c-typeck.c (record_format_info): The first time, use xmalloc. Wed Jul 10 18:54:26 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * jump.c (jump_optimize): Fix typo in "if (...) x = a; else x = b;" case: had temp3 instead of temp4. * cplus-lex.c (lineno, end_of_file): Move definition to before first use. (reinit_parse_for_block): Variable `c' must be int to ensure EOF fits. * cplus-input.c (getch): Remove extraneous declaration of end_of_file. * reload1.c: Include insn-flags.h. (emit_reload_insns): Handle the case where we reload an entire address; use "reload_load_address" pattern, if it exists. Remove explicit SImode reference; should have been Pmode, but IN can be used instead of rebuilding it. * Makefile.in (reload1.o): Includes insn-flags.h. * reload.c (find_reloads): If replacing an output REG with a MEM, write a CLOBBER for the REG after the insn. * reload1.c (eliminate_regs): Add new arg INSN; if nonzero, add a CLOBBER when replacing a REG in SET_DEST with a MEM. (reload, eliminate_regs_in_insn): Add new arg to eliminate_regs. * dwarfout.c (output_bound_representation, location_attribute): Likewise. * reload1.c (reload): If a reg_equiv_memory_loc isn't strictly valid and isn't sufficiently simple, use a stack slot instead. (alter_regs): Don't delete reg_equiv_init insns here. (reload_as_needed): Do it here. * stor-layout.c (get_best_mode): Correct test for alignment. * loop.c (move_movables): Don't get confused by NOTE insns in gnulib call sequence. Wed Jul 10 18:40:32 1991 Matthew Self (mself at geech.gnu.ai.mit.edu) * cccp.c (enum node_type): Added T_WARNING. * cccp.c (directive_table): Added #warning. * cccp.c (do_warning): Print warning message and continue. Wed Jul 10 18:38:28 1991 Matthew Self (mself at geech.gnu.ai.mit.edu) * c-parse.y, objc-parse.y (attrib): Pass "format" attribute through. Takes one identifier and two constants as args. identifier must be either printf or scanf. * c-common.c (decl_attributes): Process "format" attributes. Call new routine record_format_info(). * c-typeck.c (struct function_info): Changed function_ident field; store identifier node rather than char * to speed lookup. Renamed arg_num field to format_num. Replaced is_varargs field with new first_arg_num field. * c-typeck.c (check_format): Modified to use new arg_num and first_arg_num fields. * c-typeck.c (record_format_info): New routine. Replaces static table of functions to check. * cplus-typeck.c (record_format_info): New stub routine so c++ will link. Someone should implement format checking for c++. * c-typeck.c (init_format_info_table): New routine to add entries for ANSI functions to table. * c-decl.c (init_decl_processing): Call init_format_info_table(). * c-typeck.c (build_function_call): Modified to use dynamic table rather than static one. Compare identifier nodes rather than using strcmp(). * gcc.texinfo (): Document "format" attribute. * c-typeck.c (check_format): Call warning() directly rather than returning the warning string. This way we can give multiple warnings by continuing. Several changes to make continuing safe. * c-typeck.c (build_function_call): Incorporated changed return value of check_format(). * c-typeck.c (check_format): Check for NULL format string. Wed Jul 10 16:40:54 1991 Tom Wood (wood at dg-rtp.dg.com) * sdbout.c (sdbout_tags): Delete this and use the TYPE_DECL representation of tagged types. Types are now output in their original lexical order. (sdbout_symbol): Return early (only using sdbout_one_type) when a tagged type is encountered. (sdbout_block, sdbout_symbol): Don't use sdbout_tags. * toplev.c (compile_file): Don't use sdbout_tags. * varasm.c (assemble_function): Don't use sdbout_tags. Wed Jul 10 15:13:33 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * dbxout.c (dbxout_tags): Function deleted. Calls deleted too. (dbxout_tagged_type): New function. (dbxout_symbol): Call that. * toplev.c (compile_file): Call to dbxout_tags deleted. * c-parse.y (yylex): Simplify choice of type for integers. When traditional, all integers are signed unless explicitly unsigned. Wed Jul 10 13:35:27 1991 Tom Wood (wood at dg-rtp.dg.com) * configure (m88k-svr4): Needs make-m88ksvr4. * make-m88ksvr4: New file. Wed Jul 10 13:18:03 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * c-decl.c (duplicate_decls): Warn if `inline' is not consistent. * cccp.c (hack_vms_include_specification): Fix typos. Tue Jul 9 22:21:22 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * loop.c (find_and_verify_loops): RETURN insns aren't listed in loop_number_exit_labels, so don't try to remove JUMP_LABEL of a RETURN from that list. * rtlanal.c (reg_referenced_between_p): New function. * jump.c (jump_optimize): Use it instead of reg_used_between_p when checking for "if (...) x = a; else x = b;" case. Tue Jul 9 13:03:53 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * expr.c (move_block_to_reg): Don't force_const_mem on non-constant. Tue Jul 9 09:13:32 1991 Tom Wood (wood at dg-rtp.dg.com) * c-decl.c (finish_struct): Record tagged types as a TYPE_DECL with a NULL DECL_NAME. (finish_enum): Ditto. * cplus-decl.c (finish_enum): Ditto. * cplus-class.c (finish_struct): Ditto. * dbxout.c (dbxout_symbol): Ignore TYPE_DECLs for tagged types. * cplus-dbxout.c (dbxout_symbol): Ditto. * sdbout.c (sdbout_symbol): Ditto. * toplev.c (compile_file): DECL_NAME may be null. * dwarfout.c (output_symbol): Use output_dies_for_tagged_type for TYPE_DECLs of tagged types. (dwarfout_output_tagged_type): Deleted. (output_dies_for_tagged_type): Mark TREE_ASM_WRITTEN early. Mon Jul 8 19:36:44 1991 Tom Wood (wood at dg-rtp.dg.com) * jump.c (jump_optimize): Check for extra labels when detecting "if (...) x = a; else x = b;". Include the insn for "x = a;" when testing for data conflict. Mon Jul 8 19:34:14 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * integrate.c (copy_for_inline, case MEM): Must copy a MEM even if it has a constant address if that address involves a LABEL_REF. * rtlanal.c (reg_set_p): Only check for REG_INC notes and a CALL_INSN if we are passed an insn. * local-alloc.c (optimize_reg_copy): Remove tests now done in reg_set_p. Mon Jul 8 16:38:49 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * c-parse.y (yylex): Pedantic warning here for `asm'. No warning for `__asm__'. (maybe_type_qual, maybeasm, extdef): No warning here. * objc-actions.c: Rename OBJC_SELS_R_INTS to OBJC_INT_SELECTORS. Rename OBJC_UNIQUE_SELS to OBJ_NONUNIQUE_SELECTORS, reversing sense. Eliminate OBJC_SELS_R_STRUCT_PTRS. Mon Jul 8 06:37:00 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * rtlanal.c (reg_{used,set}_between_p): Allow FROM_INSN == TO_INSN; return 0 in that case. * jump.c (mark_jump_label): Fix typo in use of GET_RTX_LENGTH. * reload.c (reload_strict_low): Change comment to say that this is always zero; we don't use it any more. Sun Jul 7 22:14:13 1991 Michael Meissner (meissner@churchy.gnu.ai.mit.edu) * tm-mips.h (FRAME_POINTER_REQUIRED): Fix typo that required a frame if alloca was not called, instead of the reverse. Sun Jul 7 17:14:17 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * cccp.c (struct file_buf): New field system_header_p. Everything that pushes on instack now initializes this field. (finclude): New arg to set that field. Callers changed. (do_include): Pass that arg as 1 for <...>, else 0. * cccp.c (do_include): Warn for first use of #import except in system header files. (handle_directive): Support #import if compiling for Next. * cccp.c (do_pragma): For #pragma once, warn it is obsolete. Sun Jul 7 14:29:04 1991 James Van Artsdalen (james at bigtex.cactus.org) * tm-att386.h (NO_DOLLAR_IN_LABEL): Define this here, * tm-i386sco.h (NO_DOLLAR_IN_LABEL): not here. Sun Jul 7 06:20:03 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * rtlanal.c (reg_set_p): Return 1 if REG is found in a REG_INC note or if INSN is a CALL_INSN and REG is a hard reg. (reg_set_last): Only return a register or constant; if returning a register, ensure it isn't modified between the SET we found and INSN. * jump.c (jump_optimize): If SMALL_REGISTER_CLASSES, don't make a store-flag insn if any register involved is a hard reg. Sat Jul 6 14:51:15 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * expr.c (expand_assignment): Don't abort for volatile structure field even if the structure is in a register. NOTE: This leaves the problem of implementing whatever meaning a volatile field should actually have. * fold-const.c (div_and_round_double): Make lnum and lden unsigned. Use the small-denominator algorithm only for denom < 2**24. Fix backward conditionals in ?: operators in general case. Change i + j to i - 1 + j when indexing num. Fri Jul 5 21:36:57 1991 Ken Raeburn (raeburn at watch.com) * genpeep.c (match_rtx, case MATCH_OP_DUP): Output semicolon after "goto" statement. Fri Jul 5 09:45:56 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * rs6000.md (andsi3): Bias alternatives so we always prefer constants. (define_splits of DImode, SFmode, and DFmode): Don't split unless after reload. (ashldi3, lshrdi3): Fix bugs in instruction order; use & in output constraint so can't conflict with operand 2; use '0' constraint to allow operands 0 and 1 to be the same register. * regclass.c (reg_n_sets): Move definition before use. * reorg.c (fill_simple_delay_slots): Candidate for delay slot cannot set anything set between it and the delay insn. * jump.c (jump_optimize): In "if (...) x = a; else x = b;", correctly specify range to check if X is used or set. Use rtx_equal_p to check for matching X. Thu Jul 4 15:55:45 1991 Tom Wood (wood at geech.gnu.ai.mit.edu) * cccp.c (default_include): Add /usr/mach/include for MACH systems. * configure (m88k-luna): Needs make-m88kluna. * make-m88kluna: New file. * dwarf.h: New file derived from the UNIX International Programming Languages Special Interest Group DWARF specification. * dwarfout.c (includes): Include "dwarf.h". (subscript_data_attribute): Use FMT_CODE to encode array subscripts. (languagribute): LANG type no longer provided by dwarf.h. (output_source_file_die): Determine proper language attribute. Thu Jul 4 12:14:16 1991 James Van Artsdalen (james at bigtex.cactus.org) * cplus-xref.c: define rindex if USG Thu Jul 4 12:36:55 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * gcc.c (process_command): Correctly split -L from its arg. * SWITCHES_NEED_SPACES: New host machine option. This really ought to be defined now for certain hosts, but I don't know which ones they are. Wed Jul 3 23:31:00 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * tm-m68k.h (ASM_OUTPUT_FLOAT): Check CROSS_COMPILE (there was a typo). Wed Jul 3 22:05:55 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * cse.c (simplify_binary_operation, case MINUS): Fix typo in op number. * cse.c (cse_basic_block): Correctly handle the case where TO was a label with zero uses at the end of the function. * combine.c (significant_valid): New variable. (combine_instructions): Turn significant_valid off until after we finished computing reg_significant. (significant_bits): Ignore reg_significant when significant_valid is zero. * rtlanal.c (reg_set_last): Go past CALL_INSN as long as we are not looking for a hard register. Wed Jul 3 21:07:18 1991 Jim Wilson (wilson at wookumz.gnu.ai.mit.edu) * sched.c (schedule_block): When computing what registers are dead at the end of the current block, correctly handle REG_DEAD notes that refer to multi-word hard registers. * loop.c (mark_loop_jump): When invalidating loops with multiple entries, must invalidate every nested loop containing the target of a loop entry jump, except for those that also contain the jump itself. * loop.c (record_giv): When computing whether a giv is replaceable, check whether the biv update has a valid luid, and mark it as not replaceable if not. * combine.c (gen_rtx_combine): Call rtx_alloc instead of gen_rtx, because it is much faster, especially on some RISC machines. * fixincludes: Add optional argument which indicates where to put the fixed include files. Echo the directory name where the include files will be put. * cccp.c (struct default_include): Don't examine STANDARD_INCLUDE_DIR or /usr/local/include when NO_STANDARD_INCLUDE_DIR is defined. This is useful when building cross compilers. (main): Only send SIGPIPE signal if the SIGPIPE signal exists on the host. (rescan, handle_directive, skip_if_group, validate_else, skip_to_end_of_comment, macarg1, discard_comments): Accept '//' as a comment in Objective-C as well as C++. The Objective C language specifies that '//' starts a comment. * .gdbinit (ptn): Define new macro to print out the name of a type node. * stab.def: Correct errors in table for values of DSLINE and BSLINE. Document the conflict between BROWS and BSLINE. Document the value of the BROWS field. Tue Jul 2 23:26:20 1991 Michael Meissner (meissner at pogo.gnu.ai.mit.edu) * mips-tfile.c (toplevel): Add a comment explaining the MIPS ECOFF file format at the start of the file. Tue Jul 2 14:00:39 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * c-typeck.c (build_array_ref): Report error here if the "array" is not an array or pointer. Don't leave this for the PLUS_EXPR. * cccp.c: Inlcude containing file names/lines in error messages. (print_containing_files): New function. (error*, warning): Call it. (finclude): Increment input_file_stack_tick when file changes. * cccp.c: Include descrip.h. Tue Jul 2 07:44:19 1991 Tom Wood (wood at geech.gnu.ai.mit.edu) * tm-m88k.h (ASM_OUTPUT_SOURCE_LINE): Define only for SDB. * tm-m88kdgux.h (AS_BUG_*): Support these for now. * c-decl.c (finish_struct): Invoke dwarfout_output_tagged_type only when producing DWARF debugging info. * cplus-class.c (finish_struct): Ditto. Mon Jul 1 23:03:34 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * toplev.c (compile_file): Close stack_reg_dump_file iff STACK_REGS. Mon Jul 1 15:17:57 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * combine.c (set_significant): Ignore CLOBBERs. (simplify_and_const_int, case SUBREG): Only ignore paradoxical SUBREGs if BYTE_LOADS_ZERO_EXTEND. (record_value_for_reg): Fix typo; had I for REGNO. Mon Jul 1 08:28:09 1991 Tom Wood (wood at dg-rtp.dg.com) * final.c (output_source_line): Output DWARF line numbers. * dwarfout.c (dwarfout_output_tagged_type): New function. * c-decl.c (finish_struct): Call it. * cplus-class.c (finish_struct): Call it. * dwarfout.c (includes): Need insn-config.h and reload.h. (location_attribute): Use eliminate_regs for correct expression. (output_bound_representation): Use SAVE_EXPR_RTL to get rtl and then use eliminate_regs. * reload1.c (reload): When finished, indicate reg_equiv_constant and reg_equiv_memory_loc are no longer valid. (eliminate_regs): Don't attempt use of reg_equiv_constant or reg_equiv_memory_loc if they aren't valid. No longer static. * reload.h: Declare eliminate_regs. * toplev.c (compile_file): Only call dwarfout_file_scope_symbol for VAR_DECLs. Sun Jun 30 15:49:39 1991 Ken Raeburn (raeburn at watch.com) * expr.c (expand_builtin, case BUILT_IN_MEMCPY): If alignment test fails, and function was really BUILT_IN_STRCPY, zero out length parameter before expanding call. Sun Jun 30 18:27:14 1991 Richard Kenner (kenner at vlsi1.ultra.nyu) * jump.c (jump_optimize): In "if (...) x = a; else x = b;", don't move the "x = b;" if the test modifies X or if X is a hard register and SMALL_REGISTER_CLASSES is defined. Turn "if (...) x = 1; else {...} if (x) ..." code on when we have cc0. Sun Jun 30 13:49:03 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * gnulib2.c (__builtin_saveregs): For i860, make data structure fit in with va-i860.h. * tree.c (gcc_obstack_init): Support OBSTACK_CHUNK_ALLOC and OBSTACK_CHUNK_FREE. * calls.c (prepare_call_address): 3rd arg now address of chain var. (expand_call): Call changed. * expr.c (emit_library_call): Call changed. * function.c (fix_lexical_addr): In recursive call, pass slot address. * Makefile.in (cse.o): Added deps. * Makefile.in (GNULIB2_CFLAGS): Use -O2. * gnulib1.c, gnulib2.c (abort): Undefine only if defined. * genattr.c (main): Fix typo in comment end. Sat Jun 29 21:57:28 1991 Torbjorn Granlund (tege at zevs.sics.se) * longlong.h (__sparc8__ umul_ppmm): Insert 3 nop:s for wr delay. * longlong.h (___IBMR2__): Define umul_ppmm, add_ssaaaa, sub_ddmmss.. * longlong.h (__sparc__): Don't call .umul; expand asm instead. Don't define __umulsidi3 (i.e. use default definition). Sat Jun 29 06:25:19 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * tm-vax.h (CPP_SPEC): New macro. (LIB_SPEC): Handle -mg. * cccp.c (install_builtins): Fix backward test of objc. * fold-const.c (size_int): No need to test sign of NUMBER. * gcc.c (process_command): Split -L from its arg. * gcc.c (S_ISREG): Define if not defined. (delete_temp_files): Use it. * limits.h (UCHAR_MAX, CHAR_MAX, USHRT_MAX): Delete `U'. (LONG_MAX, ULONG_MAX): Add `L'. Fri Jun 28 22:22:58 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * Makefile (realclean): Delete stage1, stage2, stage3. * gcc.c (fatal) [HAVE_VFPRINTF]: Do print program name. Fri Jun 28 15:34:08 1991 Jim Wilson (wilson at wookumz.gnu.ai.mit.edu) * out-sparc.c (output_block_move): Correctly handle the case where the size is not a CONST_INT, and has a value of 0. * flags.h (flag_no_inline): Modify comment to match the one in toplev.c. * integrate.c (copy_rtx_and_substitute): When creating new rtx, make sure all of the new bitfields are copied, e.g. REG_LOOP_TEST_P, LABEL_OUTPUT_LOOP_P, etc. * loop.c (loop_optimize): Call reg_scan after find_and_verify_loops, because it may change register lifetimes. (find_and_verify_loops): After moving a block of code outside the loop, must readjust the loop_number_exit_label and LABEL_OUTSIDE_LOOP_P data of the modified jump and the moved jump. toplev.c (rest_of_compilation): Delete reg_scan call before loop_optimize. Fri Jun 28 13:16:37 1991 Michael Meissner (meissner at osf.org) * tm-mips.h (toplevel): Add target_flags to externals declared. (toplevel): Add dslots_number_nops, mips_load_reg{,2}, mips_fill_delay_slot external declarations for delay slot reorg. (CC1PLUS_SPEC): By default, pass -fno-gnu-binutils to cc1plus. (TARGET_FLAGS): Add -mwc8, -mwc16, -mwc32 to set size of wchar_t, though the switches are not used right now. (TARGET_FLAGS): Add -msoft-float code from rfg@ncd.com to compile on systems w/o floating point. (TARGET_FLAGS): -mdebugf suppresses filling load delay slots. (HARD_REGNO_OK): Relax constraints, allow anything in GP registers, anything in even FP registers, int's only in multiply and divide registers, int/CC in the FPSW register. (FRAME_POINTER_REQUIRED): Require frame if alloca is called for now. (REG_CLASS_FROM_LETTER): Index from an array (mips_char_to_class) instead of having lots of ?:'s. Also, allow 'd' to signify GP registers. (ENCODE_SEGMENT_INFO): Only record things being in small data/bss if -mgpOPT (-O sets by default), -O, and -G xx where xx > 0. (FINAL_PRESCAN_INSN): Rework to automatically not fill the previous instruction's load delay slots with nop's if it is safe. (ASM_OUTPUT_LABEL): If compiling collect, don't use assemble_name. (ASM_GLOBALIZE_LABEL): If compiling collect, don't use assemble_name. (ASM_OUTPUT_LABELREF_AS_INT): Define this for collect. (ASM_OUTPUT_INT): If collect, don't use output_addr_const. * mips.md (all floating point): If -msoft-float, don't allow any floating point builtin operations. (all patterns): Use 'd' constraint to limit things to GP registers, rather than 'r'. This allows unions of float/int/double to occupy any registers. (*extend*): Call mips_move_1word to handle loads, which in turn sees if we can omit the load nop. (fix_trunc*): Redo, since register allocator can handle moving to the appropriate register set. (movdf_xfer*): Use explicit return's instead of falling through and having the appropriate value in a register from the previous call. (movsf_xfer*): New patterns to accomidate unions of floats and int's. (movsi_unaligned): New define_expand to call either movsi_ulw or movsi_usw. Also, if not a memory operation, use movsi. (movsi_ulw): Set up to omit load delay nop if we can. (movsi_usw): Use memory_operand instead of simple_memory_operand. Also, allow storing 0 to an unaligned location. (various move patterns): mips_move_1word now takes a third argument to specify whether a load should sign or zero extend. (call_value): Use register_operand on return value. (probe): Turn into define_expand, and set a register to the contents of memory pointed to by the stack pointer with volatil set. * out-mips.c (toplevel): Add new global variables: dslots_number_nops, mips_load_reg{,2}, mips_regno_to_class, mips_char_to_class. (simple_memory_operand): If not optimizing, no global memory reference is assumed to be in the GP area. (mips_fill_delay_slot): New function to tell FINAL_PRESCAN_INSN the current insn is a load and may need a nop. (mips_move_1word): Take a third argument to say whether load byte and load half-word sign extend or zero extend. Change all callers. If this is a load, call mips_fill_delay_slots to schedule the nops. Change all return's to setting a variable, and falling through to the end. (mips_move_2words): If this is a load, call mips_fill_delay_slots to schedule the nops. Change all return's to setting a variable, and falling through to the end. (function_arg): if -msoft-float, floating point is passed in GP registers. (override_options): Initialize mips_char_to_class. (print_operand): %( and %) no longer do .set nomacro. (print_operand): %# prints #nop if gas or -mstats. (print_operand): Check for too many %), %], and %>'s. (compute_frame_size): Allocate space in stack to hold FP, just in case we later need a FP and previously thought we could eliminate it. (save_restore): Take a string to indicate the 2word load/store to use, but don't use it at present. Change all callers. Home varargs registers with sd if we can. (function_epilogue): Deal with one or more outstanding nop's from FINAL_PRESCAN_INSN. (function_epilogue): Revamp -mstats output format. (function_epilogue): Zero new global variables. * make-decrose (toplevel): Sort make variables. (CLIB): Add -lld library. (LANGUAGES): Add build of collect-osf and g++. (ULTRIX_DIR): Change internal work directory location. (cplus-lex.o): Don't optimize to avoid problem with 1.39 compiler. (collect-osf): Add rules to build OSF/rose version of collect. * make-mips (LANGUAGES): Add build of g++. * tm-decrose.h (SIZE_TYPE): Specify to be long unsigned int. (PTRDIFF_TYPE): Specify to be long int. (WCHAR_TYPE): Specify to be long unsigned int. * sdbout.c (plain_type_1): Add support for unknown tags if SDB_ALLOW_UNKNOWN_REFERENCES is defined. The MIPS ECOFF support needs this, but standard COFF typically doesn't allow unknown references. * gcc.texinfo (Debugging Info): Document SDB_ALLOW_UNKNOWN_REFERENCES and SDB_ALLOW_FORWARD_REFERENCES. * collect-osf.c (whole file): New file to provide collect support on OSF/rose. Fri Jun 28 09:20:18 1991 Tom Wood (wood at dg-rtp.dg.com) * configure (m88k-luna): New target. * tm-m88kluna.h: New file for the Omron Luna/88k. * xm-m88k.h: Don't use USG for the luna88k. * tm-m88kdgux.h: DG/UX implements coff and elf. Currently elf is a strange variant of coff that's non-standard (it uses SDB debugging info for example). Soon, the DG/UX elf will support DWARF. These changes provide transitional support for all three. (DWARF_DEBUGGING_INFO, SDB_DEBUGGING_INFO): Define both. (VERSION_0300_SYNTAX): True when -msvr4 and -mversion-03.00. * tm-m88ksvr4.h (ASM_FILE_END, ASM_OUTPUT_DWARF_LINE): Move these to tm-m88k.h. They are dwarf specific. * tm-m88k.h (TARGET_SWITCHES): Add -mversion-03.00 and -mdwarf. (OVERRIDE_OPTIONS): If using version 03.00 syntax, assume DWARF_DEBUG. * tm-m88k.h (REG_ALLOC_ORDER): Adapt slightly for using r26-r29. * out-m88k.c (m88k_debugger_offset): Don't complain if the base register is optimized away. Thu Jun 27 21:43:36 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * local-alloc.c (memref_referenced_p, memref_used_between_p): New functions. (update_equiv_regs): Call memref_used_between_p. Thu Jun 27 19:59:36 1991 Ken Raeburn (raeburn at watch.com) * print-tree.c (print_node): Changed the various "lang_#" strings to indicate which of several possible fields are being examined; new strings are "tree_#", "decl_#", "type_#". Thu Jun 27 15:05:43 1991 Michael Meissner (meissner at churchy.gnu.ai.mit.edu) * xm-mips.h (ONLY_INT_FIELDS): Define if not compiling with GCC since the MIPS compiler treats enum bitfields as signed. Wed Jun 26 19:48:16 1991 Jim Wilson (wilson at wookumz.gnu.ai.mit.edu) * sched.c (memrefs_conflict_p): Explicitly handle case where both X and Y are CONST. (sched_analyze_2): Do create dependencies for insns with REG_EQUIV notes. (sched_note_set): Correctly handle the case where the destination register is a multi-word hard register. (attach_deaths): Don't add a REG_DEAD note to an insn with a REG_UNUSED note that mentions the same register. Correctly handle the case where the destination register is a multi-word hard register. (schedule_block): Also call sched_note_set for CLOBBERs when computing which registers are dead at the end of the basic block. Also call sched_note_set for USEs when computing what registers are still live after a just scheduled insn. (regno_use_in): New function, subroutine of split_hard_reg_notes. Searches an rtx for any reference to the given register, and returns the register rtx used if any. (split_hard_reg_notes): New function. Handles the case where a multi-word hard register with a REG_DEAD note gets split. Creates a new REG_DEAD note for each part of the original hard register used by the split insns. (new_insn_dead_notes): Don't add a REG_DEAD note to an insn with a REG_UNUSED note which mentions the same register. (update_links): Add call to new function split_hard_reg_notes. Correctly handle the case when the dest of the original insn was a multi-word register which was split in the split insns. In this case, the dest is no longer killed here, so must remove the REG_DEAD on the last previous insn in this basic block which used dest, if any such exists. * unroll.c (reg_dead_after_loop): Check that a CODE_LABEL which is the target of a JUMP_INSN has a non-zero PREV_INSN field before trying to derefence it. Fail if there is no previous insn. * loop.c (scan_loop): Fix typo. * local-alloc.c (optimize_reg_copy): Likewise. * global-alloc (hard_reg_copy_preferences): Likewise. * gcc.texinfo (REG_LOOP_TEST_P): Likewise. * optabs.c (expand_float): Likewise. * tm-vaxv.h (ASM_OUTPUT_ASCII): Likewise. * out-sparc.c (output_move_double): Sign extend CONST_INTs that feed DImode targets. * tm-sparc.h (GO_IF_LEGITIMATE_ADDRESS): Don't accept a LABEL_REF as a legal address. Also, delete obsolete parts of preceeding comment. * reload1.c (alter_reg): Only try to delete the reg_equiv_init insn if it hasn't already been deleted by a previous call to delete_dead_insn. * toplev.c (main): Handle -gdbx in addition to -gsdb for orthogonality. * gcc.texinfo: Document -gdbx. Tue Jun 25 09:57:08 1991 Tom Wood (wood at dg-rtp.dg.com) * m88k.md (casesi): Don't emit a barrier; the dispatch code must adjoin the table. * tm-m88k.h (DONT_REDUCE_ADDR): Don't use this. (CONDITIONAL_REGISTER_USAGE): The PIC register is also call-used. * out-m88k.c (m88k_layout_frame): Save the PIC register. Tue Jun 25 07:40:43 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * function.c (expand_function_end): FNDECL should be CURRENT_FUNCTION_DECL. * combine.c (find_split_point): If we see an AND operation as the first operand of some non-AND operation, use it as a split point. (subst): Add counter to limit restarts, go to restart more often. (subst, case AND): If we get (ior (and (X C1) C2)) and can't restart more than once, rewrite with C1 as small as possible and exit. * cse.c (cse_end_of_basic_block): Don't put branch in our path more than once. (cse_main): Clear PATH_SIZE when skipping a block. (cse_basic_block): Use GET_RTX_CLASS. Tue Jun 25 07:39:29 1991 Matthew Self (mself at next.com) * varasm.c (const_hash, compare_constant_1, record_constant_1): For ADDR_EXPR's, don't hash address of SYMBOL_REF. Only use offset and name of symbol. This allows constructors which contain pointers to identical string literals to be uniqued. * loop.c (loop_optimize, init_loop): Moved call to gcc_obstack_init() from loop_optimize() to init_loop(). * reload1.c (reload, init_reload): Moved call to gcc_obstack_init() from reload() to new function init_reload(). * toplev.c (compile_file): Call new function init_reload(). Mon Jun 24 16:05:57 1991 Jim Wilson (wilson at wookumz.gnu.ai.mit.edu) * stmt.c (expand_end_stmt_expr): Fix typo in comment. * reload1.c (modes_equiv_for_class_p): Only fail if registers in CLASS that can hold ALLOCATE_MODE can't also hold OTHER_MODE. Do not fail for the reverse test. ALLOCATE_MODE is always a larger or same size mode as OTHER_MODE, and will be the mode that reload uses when allocating spill registers. Rewrite comments to explain new behaviour. (reload): Change call to modes_equiv_for_class_p to match new semantics. * combine.c (simplify_shift_const): When simplifying (ashiftrt (ashift inner_const_int) const_int), was checking the wrong number of high order bits of inner_const_int. Also correct typos in comments. * c-convert.c (convert_to_integer): Must also check ARG1 for unsignedness, because ARG0 could be a constant when EXPR is a MINUS_EXPR. * combine.c (try_combine): When splitting, it is not safe to use I2DEST if it is referenced by NEWPAT. * combine.c (distribute_notes): After converting REG_DEAD notes to REG_UNUSED notes, clear PLACE if it already has a REG_UNUSED note, to prevent adding a duplicate REG_UNUSED note. * gcc.texinfo (SIGNED_CHAR_SPEC): Document. Mon Jun 24 10:02:32 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * cse.c (cse_set_around_loop): Ensure the insn we find in front of the loop does the set in the proper mode. * optabs.c (expand_float): Always do conversions to FMODE in the signedness of the input. * reload.c (find_reloads, find_reloads_toplev): If reg_equiv_address is not a constant address, copy it in case it is shared. * reload1.c (eliminate_regs): Copy reg_equiv_memory_loc in case it is shared and we make a reload inside it. * stupid.c (stupid_mark_refs): Registers that aren't used must die in the insn after their birth so they conflict with other outputs. * vax.md: Replace patterns to convert (and (ashiftxx)) into (and (rotatexx)) with the patterns that are actually made by combine. We can allow offsettable addresses for operand 0 and it is not early-clobber. * out-rs6000.c (secondary_reload_class): Correctly interpret result of true_regnum. * out-rs6000.c (output_toc): Write FP constants in TOC. * tm-r6000.h (TARGET_FP_IN_TOC): New flag. (TARGET_SWITCHES): Add -mfp-in-toc and -mno-fp-in-toc. (TARGET_DEFAULT): -mfp-in-toc is the default. (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): FP constants may be put in the TOC. Mon Jun 24 00:52:44 1991 James Van Artsdalen (james at bigtex.cactus.org) * out-i386.c (output_fix_trunc): If the dest operand mentions the stack pointer, then we must adjust it to account for the temporary space we allocate on the stack here. Sat Jun 22 07:24:33 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * cse.c (cse_set_around_loop): Fix typo in call to note_mem_written. * emit-rtl.c (reorder_insns): Correctly handle case when AFTER is last insn. * expr.c (expand_expr, case COND_EXPR): Correctly handle X ? A : X + 1. Previous change called invert_truthvalue which can modify EXP; we now call it a second time to undo its action if do_store_flag fails. Sat Jun 22 02:37:59 1991 James Van Artsdalen (james at bigtex.cactus.org) * cse.c (cse_set_around_loop): Don't try to initialize an automatic structure. * reg-stack.c (compare_for_stack_reg): If both operands to a compare are the same stack reg, don't process death on the second. * i386.md (all float patterns): Don't allow constants in the operand predicates. (all patterns using convert_387_op): Split patterns into one using FLOAT and another using FLOAT_EXTEND. Fri Jun 21 20:37:03 1991 Tom Wood (wood at dg-rtp.dg.com) * sched.c (line_note, line_note_head): New vectors for use when dealing with line-number notes. (unlink_notes): Put line-number notes in LINE_NOTE for reuse. (schedule_block): Just before reordering the insns, walk the insns and record the line-number note in effect for each one. When reordering is complete, restore the line-number notes as needed. (schedule_insns): When debugging information is present, allocate and initialize line_note and line_note_head. After scheduling, walk the insns to delete redundant line-number notes. Fri Jun 21 19:54:29 1991 Jim Wilson (wilson at wookumz.gnu.ai.mit.edu) * old-sparc.c, out-old-sparc.c, tm-old-sparc.h: Delete obsolete files. * loop.c (loop_number_exit_labels): Expand comment. Mention that returns are not included because all bivs and givs are pseudos and hence must be dead after a return. Fri Jun 21 07:10:56 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * combine.c (subst, case PLUS, MINUS): Remove cases for things like (x-y)+y; now done in simplify_binary_operation. * cse.c (simplify_unary_operation): Handle (sign_extend (truncate ..)) as used in casesi patterns. (simplify_binary_operation, case PLUS, MINUS): Don't do most simplifications if IEEE floating-point. Add cases for things like (x-y)+y. (fold_rtx): Replace PC with LABEL_REF if we are immediately in front of a jump table. Move code to apply associative law to after we have folded the operands. (fold_rtx, case MEM): Fix errors in checking for index of jump table being out of range. For ADDR_DIFF_VEC, return a MINUS or (truncate (minus L1 L2)). (fold_rtx, case PLUS): If we have (plus X (label_ref L)), see if X is equivalent to (minus L1 L2). (cse_insn): Put (minus L1 L2) in `src_const' so it gets in a REG_EQUAL note and gets put in the hash table. If we are branching to a jump table, we are really branching to immediately after the jump table Remove special-case kludge for ADDR_DIFF_VEC; now handled properly. * vax.md (casesi): Make pattern agree with machine instruction; specifically, index is multiplied by two and the comparison is LEU, not LE. * cse.c (equiv_constant): If X is a one-word SUBREG of a larger quantity, use `lookup_as_function' to see if it is equivalent to a CONST_INT. * jump.c (squeeze_notes): No longer static. * loop.c (find_and_verify_loops): Need to call squeeze_notes when moving block of code (see last change). * reload.c (find_reloads): When forcing constant to memory, set recog_operand to the result of find_reloads_toplev. * combine.c (subst, case PLUS): Add (c1 - a) + c2 -> (c1+c2) - a. (subst, case MINUS): Use simplify_binary_operation rather than making CONST_INT from subtraction of two INTVAL's to ensure it gets truncated as appropriate for its mode. Add (c1 - (c2 - a)) -> (c1-c2) + a. * a29k.md (negdf2): Use operand_subword_force, not operand_subword. (movsf): Use operand_subword, not gen_lowpart. * out-rs6000.c (u_short_cint_operand): New function. (print_operand): Support auto-decrement. * tm-rs6000.h (OVERRIDE_OPTIONS): Force profiling off. (PREFERRED_RELOAD_CLASS): Return NO_REGS for real CONST_DOUBLE. (HAVE_PRE_DECREMENT): Define this. (GO_IF_LEGITIMATE_ADDRESS, GO_IF_MODE_DEPENDENT_ADDRESS): Support PRE_DEC. * rs6000.md (zero_extendxx): Use rlinm, not andil so we avoid clobbering cr0. (arith-and-record patterns): Correct some bad operand numbers. Put SImode output as operand 0 to improve register tying. (andsi): Prefer rlinm over andil and andiu. (load/store-with-update): Add patterns for these instructions. (allocate_stack): New, replaces stack probe. (add-and-compare): New patterns, with define_split. (subtract-one-and-jump): Allow outputs anywhere; handle with match_scratch and define_split. * stmt.c (expand_end_stmt_expr): If `last_expr_value' is 0, set it to const0_rtx. * regclass.c (reg_n_sets): Move definition to before use. * jump.c (find_cross_jump): Don't try to substitute REG_EQUAL values unless they are constants. Fri Jun 21 02:37:59 1991 James Van Artsdalen (james at bigtex.cactus.org) * reload1.c (reload): Don't clear after_call for each insn. Sun Jun 16 17:28:43 1991 James Van Artsdalen (james at bigtex.cactus.org) * reload1.c (reload, reload_as_needed, choose_reload_regs): Enable code to avoid return register when SMALL_REGISTER_CLASSES defined. * final.c (final_scan_insn): Don't look for no-op moves if processor has STACK_REGS. * hard-reg-set.h (GO_IF_HARD_REG_EQUAL): New macro. * jump.c (cross_jump_death_matters): New variable. (find_cross_jump): If processor has STACK_REGS, compare death notes if they matter. * toplev.c (compile_file, rest_of_compilation): Support new stack-regs conversion pass. (main, compile_file, rest_of_compilation): Add support for -dk to dump after stack-regs conversion. * reg-stack.c: New file. Implements stack-regs conversion pass. * Makefile.in (reg-stack.o): New file. * tm-i386.h (STACK_REGS): New macro. (all register macros): Define all eight float point registers. (HARD_REGNO_NREGS): Only one float reg is needed for any mode. (HARD_REGNO_MODE_OK): Move code here from out-i386.c. (FIRST_STACK_REG,LAST_STACK_REG): New macros. (ARG_POINTER_REGNUM): Move to reg 16. (FP_REGNO_P): Recognize all float regs. (QI_REG_P): New macro. (STACK_REG_P,NON_STACK_REG_P,STACK_TOP_P): New macros. (PRESERVE_DEATH_INFO_REGNO_P): Delete. (OVERLAPPING_REGNO_P): Delete. (CONST_OK_FOR_LETTER_P): Recognize constant mask for byte or word. Recognize constant 0..3 for `lea' shifts. (CONST_DOUBLE_OK_FOR_LETTER_P): (PREFERRED_RELOAD_CLASS): Don't put CONST_DOUBLE in float regs. QImode must go in class Q_REGS. Float regs can't hold MODE_INT. (MOVE_RATIO): New macro. (SHIFT_COUNT_TRUNCATED): Delete. Bit opcodes don't truncate. (RTX_COSTS): New macro. (CONST_COSTS): Make constants cheaper. (QI_HIGH_REGISTER_NAMES): Renamed from QI_REGISTER_NAMES_TOP. (INSN_CLOBBERS_REGNO_P): Delete. (FP_TOP,RETCOM,POP_ONE_POP,FP_CALL1,FP_CALL): Delete. * out-i386.c (fp_pop_level): Delete. (fp_call_internal, output_asm_insn_double_reg_op, via_memory, fp_store_sf,fp_pop_sf,fp_store_df,fp_pop_df,fp_pop_int, fp_push_sf,fp_push_df,output_movsf,output_movdf,output_movf, top_dead_p,call_top_dead_p,fp_top_dead_p1,mentioned_fp_top): Delete. (hard_regno_mode_ok): Moved to tm-i386.h. (qi_high_reg_name): New variable. (output_op_from_reg, output_to_reg): New function. (singlemove_string,output_move_const_single): No longer static. (singlemove_string): Use correct operand number in `push' string. (standard_80387_constant_p): Use recommended method to extract float from CONST_DOUBLE. (PRINT_REG): Add 'h' for "high" register names, 'y' for "st(0)". (print_operand): Code 'z' prints no size suffix for stack regs. Print DImode suffix as "ll", not just "l". (output_fix_trunc): New argument `insn'. Generalize to output to MEM or REG. Return "char *" like other output routines. Generalize for SImode or DImode output. (binary_387_op,convert_387_op,float_op,fix_op,shift_op): New match_operator predicates. (output_387_binary_op,output_float_compare): New functions. * i386.md (all MODE_FLOAT patterns): Replace with new code to use all FPU registers. (all patterns): Use AS2 and AS1 macros where possible, for eventual support of Intel syntax output. (tstM): Don't initialize operands unless we need to. (cmpM): Choose operange order in output for speed on i386. (logical test patterns): The operands commute. If possible, SImode tests should use just QImode. (movstrictM): New patterns. (movqi): Don't allow a constant of unknown value into Q_REGS. (`lea' pattern): Move after addsi3. (addsi3): Do three operand adds with `lea'. (divsi3,divhi3,udivsi3,udivhi3): Delete in favor of u?divmodM4. (divqi3,udivqi3): Remove earlyclobber for operand 0. (andM3): Define three operand ANDs for 255 and 65535 using zero extend opcode. Also directly do an AND in the second byte of a register. (iorM3,xorM3): Do byte ior instead of word where possible. (xorqi3): Allow operands[2] from MEM. (ashlsi3): Allow three-operand shift of 0..3 with `lea' opcode. (lshlM3): Redundant, delete. (shift & rotate patterns): Print %0 as destination operand. (bit recognizers): New patterns to set, clear and compliment. (call insns): Use "%P" code for targets to support Intel syntax. (movstrsi): Express changes to the operands instead of just clobbering them. Don't accept non-constant move count, as our code isn't as efficient as a library call. Thu Jun 20 13:51:02 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * cse.c (cse_insn): If we fold a conditional or computed branch to an unconditional branch, it is now not in the normal format for an unconditional branch, and it only has one set, delete it and re-emit it. Whenever we make an unconditional branch, set `cse_skip_to_next_block' and do nothing else. (cse_basic_block): Increment LABEL_NUSES on TO if it is a label so it won't go away while we are using it as a stopping point. If we are done with this block (`cse_skip_to_next_block' nonzero), pretend we just did the insn before TO. Decrement LABEL_NUSES of TO if it is a label; if it became zero, delete it and try to extend the basic block. * reload.c (find_reloads): Fix typo in check for no alternatives found. * combine.c (reg_significant, significant_mode): New vars. (combine_instructions): Allocate and initialize reg_significant. (set_significant): New function. (significant_bits, case REG): Use reg_significant, if non-zero as the significant bits of a register. * loop.c (n_times_set): Define -2 to mean that a register is an candidate to be moved and is a constant. (scan_loop): Set n_times_set to -1 or -2 as appropriate. (regs_match_p): No need to check REG_FUNCTION_VALUE_P. A register and a constant can be equal if the register is known equivalent to the constant. (invariant_p): Check n_times_set < 0, not == -1. * rtl.h (REG_LOOP_TEST_P): New macro. * jump.c (duplicate_loop_exit_test): Mark registers used only in loop exit test. * cse.c (cse_around_loop, cse_check_loop_start, cse_set_around_loop): New functions. (cse_end_of_basic_block): Add new arg to say if we are being called after loop.c has run; if we are being called after loop.c, we can ignore NOTE_INSN_LOOP_ENDs. (cse_main): Accept new AFTER_LOOP arg; pass to cse_end_of_basic_block. If we are called before loop.c, see if we can cse around to the start of a loop. * toplev.c (rest_of_compilation): Tell cse_main if it is being called before or after loop.c. * rtl.h (LABEL_OUTSIDE_LOOP_P): New macro. * loop.h (uid_loop_num): Renamed from luid_loop_num and now maps INSN_UID to loop number instead of INSN_LUID. * loop.c (loop_optimize): Modifications for the above. (find_and_verify_loop): Change luid_loop_num to uid_loop_num. Look for blocks of code ending in an unconditional branch out of the loop surrounded by a conditional branch and try to move such a block out of the loop. (mark_loop_jump): Change luid_loop_num to uid_loop_num. Mark all LABEL_REFs that are outside the current loop, for branch prediction. (strength_reduce, check_dbra_loop): Change luid_loop_num to uid_loop_num. * unroll.c (unroll_loop, find_splittable_{regs,givs}): Likewise. (reg_dead_after_loop, final_{biv,giv}_value): Likewise. * flow.c (reg_n_sets): Don't define this here. * regclass.c (reg_n_sets): Define it here. (reg_scan): Allocate and initialize reg_n_sets. (reg_scan_mark_refs): Count sets of a register in reg_n_sets. * sched.c (reg_known_value_size): New variable. (canon_rtx): Don't look in reg_known_value outside its allocated space. (init_alias_analysis): Initialize reg_known_value_size. * loop.c ({unknown,fixed}_aggregate_altered): Deleted. (loop_store_mems): Replaces loop_store_addrs and loop_store_widths. (loop_optimize): Call init_alias_analysis. (prescan_loop, note_addr_stored): Save all MEMs stored into, rather than just those that appear fixed; save MEMs rather than addresses and widths. (invariant_p): Use true_dependence to see if a MEM is invariant; compare it with all MEMs stored during the loop. * sched.c (memrefs_conflict_p): If XSIZE or YSIZE is zero the object conflict if they have the same base, irregardless of the offsets. * reorg.c (dbr_schedule): Reallocate unfilled_firstobj after freeing memory from the obstack. * reload.c (push_reload): Always reload object inside SUBREG if STRICT_LOW_PART is present. Always set RELOAD_STRICT_LOW to zero; maybe we should get rid of it. * reload.c (make_memloc): Copy the address if it varies to avoid potential sharing problems. * global-alloc.c (hard_reg_copy_preferences): New var. (global_alloc): Allocate and initialze it. (prune_preferences): Prune it. (find_reg): Try preferences in hards_reg_copy_preferences first, then hard_reg_preferences. (set_preference): Set bit in hard_reg_copy_references, if appropriate. * emit-rtl.c (try_split): If we are splitting a JUMP_INSN, copy JUMP_LABEL from the old to new insn update the count of that label. * cse.c (lookup): Always call exp_equiv_p unless we have a REG. * cse.c (insert): If we are making a register equivalent to a constant that was already equivalent to a constant, update qty_const_insn. (cse_insn): Don't do it here. * cse.c (fold_rtx): Always call simplify_unary_operation. * cse.c (record_jump_equiv): Don't get primary elements for OP0 and OP1 since they might not be valid. * loop.c (get_condition): Accept new arg, EARLIEST that is a pointer to where we place the earliest insn used to form the condition. Check for comparison with CC0 in main loop, not earlier. Never return condition involving CC0. (get_condition_for_loop): Call get_condition with new arg. * jump.c (jump_optimize): When we make store-flag insn, put new insns before earliest insn used to form condition and use new psuedo as target, which we copy into VAR immediately after the insn that currently sets VAR. Turn off "if (...) x = 1; else {...} if (x) ..." code; it is not correct and can't be easily fixed. (get_label_{before_after}): Use {prev,next}_nonnote_insn. * jump.c (jump_optimize): Don't interpret NOOP_MOVES as meaning "after_reload"; check reload_completed instead. Don't pass NOOP_MOVES to functions that aren't actually trying to noop moves. (follow_jumps, tension_vector_labels): Don't accept AFTER_RELOAD arg; check reload_completed instead. * combine.c (try_combine): Don't check that we don't have a single_set when trying to replace a SET_DEST in a PARALLEL in I2. (simplify_and_const_int): Always do the AND in the mode passed. (significant_bits, case DIV and UDIV): Nothing special known about low-order bits here. (simplify_shift_const, shift cases): Don't go into infinite loop if we combine two shifts in the same direction. * c-parse.y, cplus-parse.y, objc-parse.y (set_yydebug): Move to end of file so we don't have a reference to yydebug after its definition; also delete duplicate declaration. Thu Jun 20 09:08:21 1991 Tom Wood (wood at geech.gnu.ai.mit.edu) * local-alloc.c (block_alloc): Fixed typo in last edit. Wed Jun 19 17:05:52 1991 Jim Wilson (wilson at wookumz.gnu.ai.mit.edu) * reload.c (push_reload): Verify reload_in[i] exists before using GET_CODE on it. * m88k.md: USE insns must be immediately before CALL_INSNs to work properly, otherwise sched.c and reorg.c will not associate them will the CALL. * unroll.c (calculate_giv_inc): Accept constant increments represented as a LO_SUM. * flow.c (mark_used_regs): Don't put a REG_DEAD note on insns that already have a REG_UNUSED note. This makes it consistent with combine.c. * combine.c (distribute_notes): If a REG_UNUSED reg is no longer set by an insn, but is still used by the insn, then must convert the REG_UNUSED note to a REG_DEAD note. * gcc.c (SIGNED_CHAR_SPEC): Put ifndefs around it, so that it can be overriden by a definition in the tm.h file. * cse.c (cse_insn): Add missing third parameter to find_reg_note calls. * tm-arm.h (INIT_CUMULATIVE_ARGS): Take LIBNAME as third argument. * combine.c (can_combine_p): Remove extra argument in call to find_reg_note. * rtlanal.c (find_regno_note): Verify that the note contains a REG before checking its REGNO. * cse.c (canon_reg): Fix spacing/punctuation error. * recog.c (constrain_operands): Likewise. * tree.h: Likewise. * varasm.c (Assemble function): Likewise. Wed Jun 19 13:14:22 1991 Tom Wood (wood at geech.gnu.ai.mit.edu) * local-alloc.c (block_alloc): When counting instructions, abort if a loop is detected. Improperly threaded insns are easy to produce when working on the scheduler. Sat Jun 15 06:13:11 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * combine.c (simplify_and_const_int, case ASHIFTRT): Avoid infinite loop if simplify_shift_const doesn't do anything. Thu Jun 13 09:05:12 1991 Tom Wood (wood at dg-rtp.dg.com) * m88k.md (decrement_and_branch_until_zero): Add this insn. Thu Jun 13 07:32:37 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * explow.c (plus_constant): Fix error in last change; CONST case wasn't handled correctly. * tm-m68k.h (CONST_CONSTS): Constants between -7 and -1 are cheap because of subq. * m68k.md (dbra): Operand 0 should have '+' constraint, not '='. * expmed.c (store_fixed_bit_field): Clean up some confusion between targets and results in expand_binop calls. * local-alloc.c (optimize_reg_copy): Fix several typos relating to status updating. Correctly handle the case where DEST dies before SRC. Fix some comments that had SRC and DEST backwards. * combine.c (can_combine_p): Swap order of args of && to avoid unnecessary calls to use_crosses_set_p. (simplify_and_const_int, case SUBREG): Make code agree with comment. * emit-rtl.c (operand_subword): Avoid compilation warning. * expmed.c (store_fixed_bit_field): Don't use OP0 as SUBTARGET if it is a MEM and -fforce_mem was specified. * expmed.c (emit_store_flag): After scc insns, convert to wider mode using unsigned conversion if STORE_FLAG_VALUE is positive. * expmed.c (init_expmed): Use mode of size BITS_PER_WORD instead of SImode. (store_bit_field, extract_bit_field): Replace references to SImode with MAXMODE. (store_fixed_bit_field, extract_fixed_bit_field): Don't use explicit modes; use get_best_mode instead. (store_split_bit_field, extract_split_bit_field): Use operand_subword and mode_for_size instead of making SUBREGs and using SImode. * stor-layout.c (get_best_mode): Allow LARGEST_MODE to be VOIDmode, in which case we can use any appropriate mode. Wed Jun 12 16:32:37 1991 Michael Tiemann (tiemann at pogo.gnu.ai.mit.edu) * cplus-decl.c (init_decl_processing): Compensate for tm-sparc.h change to WCHAR_TYPE handling. Wed Jun 12 10:19:13 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * tm-sparc.h (WCHAR_TYPE): Must be "short unsigned int". * combine.c (subst, make_extraction, simplify_shift_const): Don't change mode of volatile MEM; replaces similar change of June 1st. * function.c (fixup_var_refs_1, optimize_bit_field): Likewise. * recog.c (validate_replace_rtx_1): Likewise. Tue Jun 11 22:09:28 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * expr.c (expand_expr, case COND_EXPR): Expressions of both the form X ? A + 1 : A and X ? A : A + 1 were being done, but only the former was being handled correctly. Tue Jun 11 12:13:53 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * recog.c (validate_replace_rtx_1): If putting a CONST_INT in a ZERO_EXTEND or SIGN_EXTEND, try to simplify the operation or fail; the semantics of the operation require a non-VOIDmode argument. * cse.c (delete_dead_from_cse): Don't delete last insn in a libcall. * explow.c (allocate_dynamic_stack_space): Don't clobber SIZE when rounding it. * fold-const.c (fold, case COND_EXPR): Ensure we always return an expression in the correct type. * expr.c (emit_push_insn): Don't need to put X in register if it is constant; operand_subword_force can do so if needed. * reload.c (find_reloads): Simplify nested `if' statements. * recog.c (constrain_operands): Likewise. * jump.c (mark_jump_label): Fix typo (extra paren) in last change. Tue Jun 11 10:03:08 1991 Micheal Tiemann (tiemann at pogo.gnu.ai.mit.edu) * collect2.c: New file. * sched.c (memrefs_conflict_p): Finish removing ASHIFT case. * emit-rtl.c (operand_subword): Change test of BITS_PER_WORD < HOST_BITS_PER_WORD from compile-time to run-time. * expr.c (emit_push_insn): Ditto. * recog.c (constrain_operands): Ditto. * reload.c (find_reloads): Ditto. * jump.c (jump_optimize): Add `continue' after deleting INSN in case where further attempts to optimize the insn are invalid. (mark_jump_label): Don't crash if NEXT == 0. Tue Jun 11 09:14:05 1991 Tom Wood (wood at dg-rtp.dg.com) * out-m88k.c (legitimize_operand): New function to convert CONST_DOUBLE to SFmode when possible. * m88k.md (cmpdf, adddf3, subdf3, muldf3, divdf3): Use it. * tm-m88k.h: Declare it. * xm-m88k.h (OBSTACK_CHUNK_SIZE): For DG/UX at least, the default value results in a perfect checkerboard. Tue Jun 11 07:23:45 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * expr.c (expand_expr, case FLOAT_EXPR, FIX_EXPR): Don't try to do any partial conversions here; expand_fix and expand_float now handle all modes. * optabs.c (fixtab, fixtrunctab, floattab): Table now contains all modes. (can_fix_p, can_float_p): Use mode as index in tables. (init_fixtab, init_floattab): Likewise. Add support for QImode and HImode operations. (expand_float): Rework to remove dependendence on specific modes. Can only use REAL_VALUE_LDEXP in certain configurations. (expand_fix): Likewise. If can't do operation unsigned, or signed into wider mode, emit a sequence that compares operand with 2**(N-1) and, if larger, subtracts 2**(N-1), converts, and adds it back. Protect from queue and force not memory at start. * m88k.md (fixuns_truncdfsi2, fixuns_truncsfsi2): Deleted; now done in expand_fix in optabs.c. * combine.c (expand_field_assignment): Convert SET_SRC to mode of INNER. (simplify_shift_const, case ASHIFTRT): Don't use undefined initial value of MASK. * explow.c: Include insn-config.h, recog.h, and insn-codes.h. (allocate_dynamic_stack_space): Rework to be more precise in required alignment. Must maintain alignment of stack to STACK_BOUNDARY at all times (it must not be momentarily misaligned) and must align returned address to BIGGEST_ALIGNMENT. * Makefile.in (explow.o): Show new includes. Tue Jun 11 07:22:54 1991 Matthew Self (mself at next.com) * m68k.md: Change incorrect reference to -m68040-fp to -m68040-only. Fix several spelling errors. * m68k.md (fix_trunc*f*i2): New insn's to replace fintrz on the '040. These emit a sequence of insn's to change the rounding mode to round-to-zero, perform the truncation, and restore the rounding mode. Mon Jun 10 09:57:31 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * c-lang.c (GNU_xref_{begin,end}): Add stub functions for xref info. * cplus-decl.c (record_builtin_type): Add support for handling builtin types' nicknames (e.g. "unsigned long" for "long unsigned int"). * expmed.c (struct algorithm): Change array size from BITS_PER_WORD to MAX_BITS_PER_WORD. gcc.texinfo: Document MAX_BITS_PER_WORD. Mon Jun 10 07:45:17 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * combine.c (try_combine): When making an I1 from an I2 that is a PARALLEL, give the new I1 the same INSN_UID as I2. * recog.c (constrain_operands, case 'p'): Pass operand mode (from match_operand) to strict_memory_address_p. * m68k.md (andsi3): bclr does not set the condition codes in the standard way. Sun Jun 9 11:16:24 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * reload.c (find_reloads): Swap preferred_class and pref_or_nothing when we swap commutative operands. * combine.c (subst, simplify_shift_const): Treat UDIV and MULT with a second operand of a constant that is a power of two as the appropriate shift if it feeds or is fed by a shift. * expmed.c (expand_divmod): When searching for the best mode to perform the computation, take into account the fact that we sometimes do a shift, not a divide. * expmed.c (emit_store_flag): Correctly handle "a = b < 0;" if A is narrower than B. Don't check for STORE_FLAG_VALUE equal to just the sign bit of OP0 if the width of its mode is larger than HOST_BITS_PER_INT. Use switch rather than if/elseif/elseif. * combine.c (simplify_shift_const, shift cases): We were not forming the mask correctly when VAROP is a LSHIFTRT and narrower than X; simplify the mask formation by using significant_bits and simplify_binary_operation. * reload.c (make_memloc): Copy RTX_UNCHANGING_P from REG to MEM. (find_reloads_address, find_reloads_address_1): Don't shortcut reloading the address in reg_equiv_address; always call find_reloads_address on it. * recog.c (constrain_operands, case 'p'): Validate address if testing strictly. * out-alliant.c, out-m68k.md (output_move_double): Extraction of parts of CONST_INT was backwards; these machines are words-big-endian. Sat Jun 8 12:19:26 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * sparc.md: Remove special-case shift insns which load and shift memory-based operands. Combine now does this for us. Also change abs patterns so that they consistently print the negation followed by the mov on a single line. * reload1.c (choose_reload_regs): Cast `enum reg_class' values to `int' when using them as array indicies. * gnulib2.c (LONG_TYPE_SIZE): Don't inherit the definition of LONG_TYPE_SIZE from tm.h, since that may be target_flag-specific. Instead synthesize the value from `sizeof (long)'. * cplus-gc.c (build_m_desc): Figure out whether the i_desc should constitute a defn of its type or not. Analogous to May 26 change for instance variables. Sat Jun 8 07:11:26 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * combine.c (simplify_and_const_int): Detect and remove redundant alignment operation. (significant_bits, case REG): Realize that the stack pointer might be aligned. (significant_bits, case PLUS, MUNUS, MULT, DIV, UDIV): Track low-order bits of zero as well as high-order zero bits (so we detect alignment operations). (record_value_for_reg): If updating a register, try to substitute its old value into the expression for better tracking of values. * a29k.md (fmac/dmac): Delete incorrect patterns. Thu Jun 6 19:08:29 1991 Sean Fagan (sef at cygint.cygnus.com) * final.c (output_source_line): Say we are on line number 1 if sdb_begin_function_line is -1, not 0. Thu Jun 6 08:01:05 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * stor-layout.c (get_best_mode): Don't assume GET_MODE_SIZE (SImode) is UNITS_PER_WORD; if SLOW_BYTE_ACCESS defined, try to return the mode whose size is UNITS_PER_WORD. * sparc.md (floatsisf2, floatsidf2): Add missing mode for operand 1; use const_int_operand as predicate. * cse.c (canon_reg): Add arg INSN; if replacing a pseudo with a hard register or vice versa, use validate_change to ensure the insn remains valid. All callers changed; most pass zero since they validate replacement. (cse_insn): Use validate_change on result of canon_reg when required. * c-common.c (combine_strings): Use WCHAR_BYTES instead of UNIT_PER_WORD for the size of a wide char. * emit-rtl.c (gen_lowpart_common): Always extract integral modes from integer CONST_INTs and CONST_DOUBLEs. * integrate.c (copy_for_inline, copy_rtx_and_substitute): Don't try to extract a float from a fixed-mode CONST_DOUBLE. (copy_for_inline, copy_rtx_and_substitute, restore_constants): Declare target of REAL_VALUE_FROM_CONST_DOUBLE to be REAL_VALUE_TYPE. * local-alloc.c (update_equiv_regs): Fix typo in testing reg_basic_block. Wed Jun 5 09:15:09 1991 Ken Raeburn (raeburn at watch.com) * Eliminate unneeded binding levels when overloading template class names: * cplus-pt.c (overload_template_name): Accept second argument classlevel, indicating that new decl should be pushed into current class binding level; otherwise, assume current level is okay to use. Callers changed. (undo_template_name_overload): New second argument classlevel indicates where binding for variable was made. Callers changed. * cplus-parse.y (structsp): Call undo_template_name_overload in all appropriate cases. * Get interface/implementation flags set properly on methods in class templates, and use it: * cplus-lex.c (store_pending_inline): If inside a class, walk up through nested classes to top level looking for template parameters. For class methods, use current interface flag settings rather than flags for class. (extract_interface_info): No longer static. (do_pending_inlines, process_next_inline): Call extract_interface_info to get interface flags set properly after changing file names. * cplus-pt.c (instantiate_class_template): Ditto. (end_template_instantiation): Ditto. (do_pending_expansions): If interface/implementation flags of containing class are set, use them. * cplus-tree.h (interface_unknown): Added declaration. Wed Jun 5 07:36:44 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * reload.c (find_reloads_address): Unshare a MEM if its address is the address of a constant pool location. * optabs.c (expand_binop): Fix typos in multi-word addition; had MODE for SUBMODE. * reload1.c (alter_reg): Correctly delete insn that makes a REG equivalent to a MEM in the case where the MEM is the SET_DEST. * a29k.md (negdf2): Add missing alternative in operands 2. (movdi): Change "i" constraint to "n". Split for constant integer as input; split cannot fail. Correct typo in DEFINE_SPLIT (DFmode for DImode). * out-a29k.c (gen_reg_or_integer_constant_operand): New function. * configure: Fix typo in reference to tm-sun3-nfp.h. Wed Jun 5 06:56:10 1991 Matthew Self (mself at next.com) * c-parse.y, objc-parse.y (attrib): Always pass aligned attribute through. Return $1 on failure rather than NULL_TREE for consistency. * c-common.c (decl_attributes): Warn if requested alignment is not a power of two. Also warn if decl is not a VAR_DECL or a FIELD_DECL, since specifying alignment makes no sense for a TYPE_DECL, and is not implemented for a FUNCTION_DECL. * c-parse.y, objc-parse.y (initdcl, notype_initdcl): Call decl_attributes before finish_decl in order for alignment attribute to take effect. * varasm.c (assemble_variable): Warn if DECL_ALIGN is greater than MAX_OFILE_ALIGNMENT, if defined. This allows errors to be detected with formats like a.out which support a maximum alignment of 4. * c-parse.y, objc-parse.y (component_declarator): Call decl_attributes with correct args. * stor-layout.c (layout_record, layout_union): Do not clamp struct alignment at BIGGEST_ALIGNMENT, since individual fields may have requested greater alignment than this. This check shouldn't have done anything anyway. * c-parse.y (unary_expr): When alignof is applied to an expression, call c_alignof_expr so that we can check DECL_ALIGN instead of calling c_alignof (TYPE_ALIGN (TREE_TYPE (expr))). * c-typeck.c (c_alignof_expr): New function to compute alignof for expr's. Returns DECL_ALIGN for VAR_DECL's and FIELD_DECL's. Also return 1 after reporting error about applying alignof to bitfields. * c-tree.h (c_alignof_expr): Add declaration. * varasm.c (assemble_variable): MAX_OFILE_ALIGNMENT defaults to BIGGEST_ALIGNMENT if not defined in config.h. Wed Jun 5 06:55:12 1991 Tom Wood (wood at dg-rtp.dg.com) * m88k.md (mov*): Change the interface to emit_move_sequence. * out-m88k.c (emit_move_sequence): Similar to the sparc version. * tm-m88k.h (SIZE_TYPE): Specify as unsigned int. * xm-m88k.h (HOST_BITS_PER_LONGLONG): Define. Wed Jun 5 01:45:07 1991 Sean Fagan (sef at cygint.cygnus.com) * sdbout.c (sdbout_symbol): don't output definition information for a nested function inside the parent function; this makes COFF assemblers upset. Tue Jun 4 17:35:13 1991 Sean Fagan (sef at cygint.cygnus.com) * function.c (trampoline_address): make the RTL_EXPR node temporary, not momentary, so that the trampoline_list doesn't become garbage. Fix made by jim wilson (wilson@cygnus.com). Tue Jun 4 09:40:59 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * expr.c (move_block_to_reg): Fix typo in last change. * local-alloc.c (update_equiv_regs): Check for reg_n_refs == 2, not loop_depth * 2. * reorg.c (fill_simple_delay_slots): Clear INSN_DELETED_P on insns placed in current_function_epilogue_delay_list. * make-rs6000 (ALLOCA_FLAGS, ALLOCA_FINISH): Add override to compensate for the fact that the RS/6000 C compiler has no -S. * out-rs6000.c (easy_fp_constant): Use operand_subword. (print_operand): Use INT_P and INT_LOWPART to allow accepting both CONST_INT and CONST_DOUBLE for integers. * rs6000.md (floatsidf2, floatunssidf2): Rework these to emit only two insns, each of which has DImode or DFmode operands. Then split the funny DImode insn to generate it. (fix_truncdfsi2, fixuns_truncdfsi2): Surround our call with REG_LIBCALL/REG_RETVAL notes. Use operand_subword. (movsf, movdf): Correctly handle a pseudo passed during reload. Use operand_subword. Split moves involving "easy" FP constants. (subtract-and-branch): Disable for now, to avoid output reload in jump. * tm-rs6000.h (WCHAR_TYPE): Add definition. (INT_REGNO_P): Fix typo; register 31 is a normal register. (LEGITIMATE_CONSTANT_P): The only FP constants that are valid are the "easy" ones. * a29k.md (negdf2): Use XOR when not involving accumulator. Add SCRATCH so we dont use gr122. Handle case where input and output are same register. (negsf2): Use SCRATCH. (DImode operations): Use operand_subword, not gen_{low,high}_part. (movsf, movdf, movdi): Always split if we can look inside CONST_DOUBLE. Use operand_subword. Don't split into separate words in DEFINE_EXPAND. * out-a29k.c (in_operand): Account for fact that integer CONST_DOUBLE is VOIDmode. (extract_subword): Deleted. (print_operand): Add macros INT_P and INT_LOWPART so we can accept either CONST_INT or CONST_DOUBLE. * romp.md (movdi, movdf, negsf2, negdf2): Use operand_subword and operand_subword_force, instead of gen_{high,low}part. Use force_const_mem instead of force_const_double_mem. * m88k.md (movdi): Remove 'F' constraint; 'n' now includes integer CONST_DOUBLE. (anddi3, iordi3, xordi3): Likewise. Use operand_subword to extract individual words. * out-m88k.c (output_load_const_{float,double,dimode}): Use operand_subword. * Makefile.in (emit-rtl.o): Now includes expr.h. * calls.c (expand_call): Pass mode to move_block_to_reg. * combine.c (subst, case SUBREG): Simplify SUBREG of hard register and some SUBREGs of constants. (gen_lowpart_for_combine): If object is desired mode, always return it. Use gen_lowpart_common for most cases; just support MEM and surrounding with a SUBREG here. * cse.c (insert): CONSTANT_P includes CONST_DOUBLE. (fold_rtx): Use MODE for GET_MODE (X). (fold_rtx, case SUBREG): Handle simple cases of folding SUBREGs. (fold_rtx, case MEM): Use operand_subword and gen_lowpart_if_possible to get parts of constant instead of gen_lowpart and gen_highpart. (gen_lowpart_if_possible): Use gen_lowpart_common for most cases. * expr.c: Include expr.h. (gen_lowpart_common): New function, from gen_lowpart. (gen_lowpart): Use gen_lowpart_common for most cases; just handle MEM. (gen_highpart): Deleted. (subreg_lowpart_p): Test WORDS_BIG_ENDIAN in `if', not `#if'. (operand_subword, operand_subword_force): New functions. * explow.c (plus_constant): Handle adding CONST_INT to CONST_DOUBLE. Rework to use switch statement. Remove obsolete OLD_INDEXING code. (plus_constant_for_output): Use plus_constant for most cases. (break_out_memory_refs): Refine which constants get broken out. * expmed.c (store_bit_field, extract_bit_field): Don't use gen_highpart for multi-word fields; instead, loop and use operand_subword. We now support fields more than two words long. (mask_rtx, lshift_value): Just pass high and low words to immed_double_const; it will mask and choose CONST_INT vs. CONST_DOUBLE. * expr.c (convert_move): Use operand_subword instead of gen_highpart. Don't assume GET_MODE_SIZE (DImode) > UNITS_PER_WORD. (move_block_to_reg): Add MODE arg. Use operand_subword_force. (move_block_from_reg): Use operand_subword. (move_block_from_reg, move_block_to_reg, use_rgs): Don't assume GET_MODE_SIZE (SImode) == UNITS_PER_WORD. (emit_move_insn, emit_push_insn): Likewise. Use operand_subword and operand_subword_force. (expand_expr, case INTEGER_CST): Just call immed_double_const. (expand_expr, cases FIX_TRUNC_EXPR, FLOAT_EXPR): Don't assume GET_MODE_SIZE (SImode) == UNITS_PER_WORD. (expand_builtin): Likewise. (do_jump_by_parts_{greater,equality): Likewise. Use operand_subword_force. * expr.h (operand_subword): Remove declaration from here. (validize_mem): Add missing declaration. * final.c (final_scan_insn): If assembler code string is "#", try to split insn. Ignore insns with INSN_DELETED_P set. (alter_subreg): Remove erroneous code for CONST_DOUBLE. (output_addr_const): Integer CONST_DOUBLEs are now VOIDmode. * fold-const.c (add_double): No longer static. * integrate.c (copy_for_inline, copy_rtx_and_substitute): Use validize_mem to validate force_const_mem's result. (subst_constants, case SUBREG): Use operand_subword and gen_lowpart_common instead of gen_lowpart and gen_highpart. (restore_constants): Don't assume all CONST_DOUBLEs are floating. Use validize_mem to validate force_const_mem's result. * optabs.c (expand_binop,, expand_unop): Don't assume GET_MODE_SIZE (SImode) == UNITS_PER_WORD. Use operand_subword_force. (operand_subword): Deleted from here. New version in emit-rtl.c. * recog.c (validate_replace_rtx_1): Check for any constant, not just CONST_INT. (constrain_operands, case 'm', 'o'): Any constant OK if strict < 0. (constrain_operands, case 'E'): Must have host and target word sizes the same. (constrain_operands, case 's', 'n'): CONST_DOUBLE can be integer. * reload.c (find_reloads, case 'm', 'o', 'E', 's', 'n'): Likewise. Don't call force_const_double_mem; use force_const_mem instead. (find_reloads_toplev): Likewise. Use gen_lowpart_common to get low part of constant. * rtl.h (gen_highpart, force_const_double_mem): Deleted. (gen_lowpart_common, operand_subword, operand_subword_force): New declarations. * varasm.c (const_double_chain): Renamed from real_constant_chain. (immed_double_const): For integer constants, perform any needed masking and make either CONST_INT or CONST_DOUBLE. (force_const_double_mem): Deleted; would need a mode arg added which would make it almost identical to force_const_mem. * out-vax.c (split_quadword_operands): Use operand_subword instead of gen_lowpart and gen_highpart. * function.c (find_replacement): New function. (fixup_var_refs_insns): Pass pointer to listhead of (new) fixup_replacement structures; if any entries were pseudos, copy from memory to the pseudo. (fixup_var_refs_1): New arg REPLACEMENTS; provide that arg in recursive calls. Use find_replacements to ensure we don't break any MATCH_DUPs. Tue Jun 4 05:07:53 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * stmt.c (pushcase, pushcase_range): Take new parameter DUPLICATE. Use this to store existing LABEL_DECL if LABEL is a duplicate. * c-parse.y, cplus-parse.y, objc-parse.y, stmt.c: All callers changed. Mon Jun 3 17:19:40 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * cplus-expr.c (decl_in_memory_p): New function. * cplus-typeck.c (mark_addressable): Test `decl_in_memory_p' instead of testing memory_operand, since the DECL_RTL of a decl may be a (MEM ...) by not a valid memory address. * cplus-typeck.c (mark_addressable): When we decide that a static const variable must go to memory, make sure that its rtl is allocated from the correct obstack. * cplus-decl.c (grokdeclarator): Replace undocumented BREAK_C_TAGS #define control with comments explaining why or how it is correct for GNU C++ to break C's notions of what a tag is. * cplus-call.c (convert_harshness): Replace undocumented #if AMBIGUOUS_WORKING control with a comment explaining the actions where this control used to be. Mon Jun 3 15:07:47 1991 Sean Eric Fagan (sef at kithrup) * tm-i386.h (TRAMPOLINE_TEMPLATE): Changed a 040 to 0xe0; this is the proper code for a jmp [%eax] instruction. Mon Jun 3 08:07:42 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * cccp.c (initialize_builtins): Install __SIZE__TYPE__, __PTRDIFF_TYPE__, and __WCHAR__TYPE__ as builtins. Sun Jun 2 18:18:19 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * flow.c (mark_set_1): Don't set LAST_MEM_SET from a MEM that has any side-effects (such as auto-inc), not just volatile MEMs. * rtlanal.c (reg_referenced_p): New function. * combine.c (try_combine): Correct test for added_sets_1 to account for case where I1 and I2 both feed I3. (distribute_notes): Don't interpret setting a reg as a use of the reg; use new reg_referenced_p and simplify code. * flow.c (propagate_block): Ensure that LOOP_DEPTH is correct at all insns in a basic block, otherwise reg_n_refs will be set incorrectly. * recog.c (validate_replace_rtx_1): Don't change mode of memory reference that is mode-dependent. Don't make a MEM with a larger mode than original. * combine.c (try_combine): Disable code to check MODES_TIEABLE_P added May 20th and 22nd; this should not be needed now that LIMIT_RELOAD_CLASS has been added to reload. * flow.c (mark_set_1): Allow for the fact that stack pushes don't have REG_INC notes. * local-alloc.c (optimize_reg_copy): Likewise. Don't change lives of hard registers #ifdef SMALL_REGISTER_CLASSES. A USE of a register must not be changed. (validate_equiv_mem): Don't make an equivalence to volatile MEMs. * reorg.c (mark_set_resources): #ifdef PUSH_ROUNDING, mark SP as always set since the insn might have a (pre_dec sp). Sun Jun 2 16:03:31 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * Makefile.in (libg_dir): Variable deleted. (install-gnulib): Don't bother creating libg.a. * cccp.c (size_type_string, etc.): Variables deleted. (special_symbol): Use macros SIZE_TYPE, etc., directly. Sat Jun 1 12:54:05 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * Let tm.h specify types for size_t, ptrdiff_t and wchar_t. (SIZE_TYPE, PTRDIFF_TYPE, WCHAR_TYPE): New params. * cccp.c, c-decl.c: Provide default definitions of the new params. * cccp.c (__SIZE_TYPE__, __PTRDIFF_TYPE__, __WCHAR_TYPE__): Builtins. (special_symbol): Implement them based on new params. * stddef.h (size_t, ptrdiff_t, wchar_t): Declare using those builtins. * c-tree.h (ptrdiff_type_node): Declare variable. * c-decl.c (init_decl_processing): Use *_TYPE params to control setting of sizetype, wchar_type_node and ptrdiff_type_node. * c-typeck.c (pointer_diff): Take result type from ptrdiff_type_node. * configure (target1): Really change / to -. Sat Jun 1 02:49:04 1991 Michael Tiemann (tiemann at cygnus.com) * cplus-lex.c (extract_interface_info): Now non-static. Called whenever INPUT_FILENAME changes. * cplus-pt.c (instantiate_class_template): Call `extract_interface_info' when switching files. * cplus-input.c (getch): Ditto. * combine.c (subst): Don't change the mode of memory access for volatile memory. * tm-sparc.h (CONST_COSTS): Fix typo in computing cost of CONST_DOUBLE for DImode integers. Fri May 31 16:11:57 1991 Ken Raeburn (raeburn at watch.com) * cplus-lex.c (process_next_inline): Set line number and filename if more inline data is to be processed. (store_pending_inline): Treat FUNCTION_TYPE like METHOD_TYPE. Use current_class_type instead of extracting it from method type; the two should be the same, and the latter doesn't work for statics. * cplus-decl.c (start_decl): When constructing templates, use original name of function rather than "mangled" name. Look for FUNCTION_DECL, not FUNCTION_TYPE, when deciding how to push the new decl. (start_method): Default inlining does not apply to template expansions. * cplus-pt.c (pending_template_expansions): Moved declaration to start of file. (tsubst): For FUNCTION_DECL, use original name of source, not mangled name. (instantiate_template): Local variables now non-static. Fill in pending-inline field of new decl, rather than template-info, and chain into either pending-inlines or pending-template-expansions. * cplus-typeck.c (build_x_function_call): If a template is found, treat it as an overloaded declaration. Fri May 31 14:20:45 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * Makefile.in (all.cross): New target. * configure: If cross-compiling, change `ALL' to use all.cross. Fri May 31 11:43:31 1991 Matthew Self (mself at next.com) * tm-next.h (EXTRA_SECTION_FUNCTIONS): Add new constructor and destructor sections. (MAX_OFILE_ALIGNMENT): Define as 2^15 for Mach-O. (ASM_OUTPUT_ALIGN): Use .align, not .even. Allow alignments > 2. (CPP_PREDEFINES): Added -Dm68k since some code expects this. Fri May 31 05:41:51 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * cplus-class.c (pushclass): New argument value for MODIFY accepted. * cplus-decl2.c (build_push_scope): Call `pushclass' with MODIFY == 3. * cplus-decl.c (finish_function): Set TREE_PUBLIC and TREE_EXTERNAL bits on functions according to #pragma interface/implementation, regardless of whether or not the function's inline. This fixes the bug of needless code replication with -fno-inline. Thu May 30 17:39:53 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * expr.c (expand_expr): Don't lose volatility of fields in COMPONENT_REF. Thu May 30 17:36:45 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * cse.c (count_reg_usage, delete_dead_from_cse): New functions. * toplev.c (rest_of_compilation): Call delete_dead_from_cse immediately after the first cse pass. * local-alloc.c (validate_equiv_mem_from_store, validate_equiv_mem): New functions, to find cases where a REG is equivalent to a MEM. (optimize_reg_copy): New function. (update_equiv_regs): Call these new functions. Look for a register used in only one basic block being stored into memory. Keep track of loop depth so we can find regs used only once, but inside a loop. * reload1.c (reload): Use single_set when looking for an insn that initializes a register. If making a REG equivalent to a MEM, the insn with SET_DEST being the register isn't always the one making the equivalence, since the equivalence might be occurring due to a store into MEM; in that case set reg_equiv_init to the latter insn. Thu May 30 14:23:01 1991 Ken Raeburn (raeburn at watch.com) * Pending expansions processed at end-of-file can be processed out of order, so freeing the associated data from the obstacks is not possible. * cplus-tree.h (struct pending_inline): New field can_free indicates whether to free the text after processing it. * cplus-lex.c (do_pending_inline, process_next_inline): If can_free flag is set, specify inline-text obstack, otherwise null pointer. (cons_up_default_function): Clear flag. (reinit_parse_for_method): Set it. (store_pending_inline): Clear it when changing obstacks. (pending_template_obstack): Deleted. References changed to use permanent_obstack. * cplus-lex.c (store_pending_inline): Set DECL_PENDING_INLINE_INFO value after swapping obstacks, not before. Thu May 30 07:23:18 1991 Michael Tiemann (tiemann at cygnus.com) * va-sparc.h: Has to be a char * to be compatible with Sun. i.e., we have to pass a `va_list' to vsprintf. Also, fixed bug in passing vararg structs. Thu May 30 00:32:18 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * configure: Delete Makefile.tem before writing it. * stor-layout.c (layout_record): Ignore PCC_BITFIELD_TYPE_MATTERS for incomplete type. * fixincludes (stdtypes.h): Handle wchar_t like the other types. * function.c (assign_parms): Don't declare args_so_far register. Wed May 29 15:13:05 1991 Ken Raeburn (raeburn at watch.com) * cplus-tree.def (TEMPLATE_PARM_IDX): Deleted. (TEMPLATE_TYPE_PARM): New node type, looks like a type node. (TEMPLATE_CONST_PARM): New node type, looks like a const node. * cplus-tree.h (IDENTIFIER_TYPE_VALUE_PTR): Inlined under gcc. (TYPE_IDENTIFIER_PTR): Ditto. (DECL_NESTED_TYPENAME_PTR): Ditto. (struct lang_type): New bitfield `use_template'. (CLASSTYPE_USE_TEMPLATE): Accessor macro for above. (struct lang_decl): New field `template_info'. (DECL_TEMPLATE_INFO): Accessor macro for above. (TEMPLATE_EXPANSION_NAME_P): Deleted. (push_overloaded_decl_top_level): Added declaration. (TEMPLATE_TYPE_TPARMLIST, TEMPLATE_TYPE_IDX, TEMPLATE_TYPE_SET_INFO, TEMPLATE_CONST_TPARMLIST, TEMPLATE_CONST_IDX, TEMPLATE_CONST_SET_INFO): New macros for accessing fields of TEMPLATE_..._PARM nodes. (struct pending_inline): New fields for names and values to bind to them while processing. (struct template_info): Definition moved here from cplus-pt.c. (instantiate_template): Added declaration. (instantiate_class_template): Ditto. (processing_template_{decl,defn}): New variable declarations. * print-tree.c (print_node): Provide missing argument to print_node for `bitpos' field. Display `virtual' flag, and (for function and method types) `class' field; these are only used by C++ that I'm aware of, but are defined in common code, so they should be displayed here. * cplus-parse.y (template_def): Separate set of derivations, for class and function templates. Template_def is a type of extdef; extern_lang_string before template_def is not permitted. (fn_tmpl_end): New nonterminal, anything that signals the end of the portion of a template that we should parse. (yyprint): Define only if YYDEBUG. Handle TYPESPEC. (datadef): Complain at class template override declaration if that specialization has already been produced by expansion. Template definitions no longer belong here. (tmpl.2): Always call instantiate_class_template; let it decide whether or not to go through with it. (template_instantiation): Put decl in global scope only if not already there. (typespec, scoped_typename): Scoped typename inside template type should be a scoped_typename, not a typespec. However, a template_type should be allowed as a typespec. (structsp): Don't undo template name overload here. Deleted derivation from template_type. (named_class_head_sans_basetype): Don't overload template name. (LC): Do it here. (notype_declarator): For scoped_id derivations, don't call build_push_scope if the scoped_id is a SCOPE_REF. (scoped_id): Moved old typespec-from-template_type rule here. Call resolve_scope_to_name only if template parms aren't involved. * cplus-pt.c (struct template_info): Definition deleted. (templates, current_template_info): Variables deleted. (processing_template_{decl,defn}): New variables. (push_template_decls, pop_template_decls): Accept parmlist and arglist as separate arguments, instead of deriving both from the template. If class_level is non-zero, push and pop a level, making it transparent to tags. Removed some pointless checks from pop_template_decls that are only needed in push_template_decls, and some assertions from both. Callers changed. (uses_template_parms): Return non-zero iff argument refers to any TEMPLATE_*_PARM nodes. (tsubst): Walk tree, substituting for template parms, returning new tree. (type_unification): Rewritten a bit, to make it work. New argument nsubsts is pointer to place to record number of substitutions made when matching. (unify): Renamed from unify1. Rewritten completely, to work. Still may need extending for some tree node types. (do_pending_expansions): At end-of-file, expand any templates not yet expanded which were actually needed. Needs work to accomodate latest specs. (process_template_parm): Simplified slightly. Non-type parms should be marked read-only; aggregate types are not allowed, since equality checks don't work. (end_template_parm_list): Moved to after process_template_parm. Push a level, and push decls for TEMPLATE_*_PARMs. Set processing_template_decl flag. (end_template_decl): For non-class templates, build a TEMPLATE_DECL and store the regular decl in its result field. Context and other values get copied over too. Call poplevel to get rid of the TEMPLATE_*_PARM decls, and call dont_forget_overload to avoid losing the declaration later. Clear processing_template_decl flag. Call get_pending_sizes, so later function compilation doesn't try to evaluate sizes of templates. (mangle_class_name_for_template): Convert type/non-type check from switch to if test. Added support for ENUMERAL_TYPE, REAL_TYPE, and POINTER_TYPE parms. (instantiate_class_template): Renamed from old instantiate_template. Don't expand if type size is set, or if being-defined flag is set, or use-template flag is non-zero. If other-template parms are used in the parm list, construct a simple RECORD_TYPE node and return it. Catch case of template declared but not defined before use. Renamed argument from class to classname. Set processing_template_defn flag. (instantiate_template): New routine; constructs new decl node given TEMPLATE_DECL node and template arg vector. (end_template_instantiation): Set use-template field to 2 ("did use template"). Clear processing_template_defn flag. (reinit_parse_for_template): Get template-info ptr from decl node. Store template parm vector in it. (pending_template_expansions): List of templates that may need expanding later for function or class data definitions. * cplus-method.c (build_overload_value): Ensure tree code is PARM_DECL. Handle ENUMERAL_TYPE like INTEGER_TYPE. For DImode values, compare against integer_zero_node instead of constructing another one. Added support for POINTER_TYPEs. If not REAL_IS_NOT_DOUBLE, support real values as well. (build_overload_name): Accept TEMPLATE_*_PARM nodes, but generate a string that should cause some assembler errors. * cplus-ptree.c (print_lang_decl): Retrieve template-info from its new place. (print_lang_type): For TEMPLATE_TYPE_PARM, print its (short) info and return. For RECORD_TYPE, print use-template and interface-* fields. * cplus-search.c (push_class_decls): Don't call push_template_decls; the bindings of template parameter names should be associated with the template body, not with the class. Do overload the template name, however. (pop_class_decls): Don't call pop_template_decls. * cplus-call.c (build_method_call): Changed to recognize constructor of template class. (build_overload_call): Add in number of template substitutions as extra cost of a candidate function. For template decls, try unification and instantiation before evaluating cost of result. This too is incorrect in terms of the spec, but it's a starting point for later work. * cplus-class.c (finish_struct): If structure is named, undo overload of its name as a template. (pushclass): If prev_class_type was a template class, pop it; the decls are handled wrong and should be re-entered. * cplus-decl.c (poplevel): Assert that the current level is not global. (push_to_top_level): Include global scope when looking for old values, because class bindings aren't listed in any other one place. (push_overloaded_decl_top_level): New function; like push_overloaded_decl, but places decl in global binding level. (dont_forget_overload): New function; removes decl from list of overloads to be forgotten when scope is exited. (start_decl): If template parms are used, construct a TEMPLATE_DECL node referencing the current decl. For function templates, call push_overloaded_decl; for class template members, chain them into the class template definition. (grokdeclarator): Don't try determining size of a TEMPLATE_CONST_PARM node. For template class-data decls, construct a phony VAR_DECL node and return it. * cplus-decl2.c (grokfield): For static class data, use build_overload_name result, instead of copying class name, since the latter could be a human-readable template class name. (If NEW_OVERLOAD_SCHEME is not defined, do this only if the class has a template-derived name.) * cplus-lex.c (pending_template_obstack): New variable; obstack for pending-template stuff to be saved to end-of-file. (init_lex): Initialize it. (default_def): New variable; used for default definition of copy constructors and destructors. (do_pending_inlines): Figure out whether text is in an obstack, and which one, for calling feed_input. Push template decls if needed, as specified in pending_inline data. Pass current pending_inlines pointer back in PRE_PARSED_FUNCTION_DECL instead of next. (process_next_inline): Ditto. Pop pending inline data if needed. (store_pending_inline): New function. Decides which obstack to store a pending definition on, and which list to chain it into. (reinit_parse_for_method): Call it. (reinit_parse_for_block): If character passed in is '=', look for a semicolon to end the block; don't require a {} block. Don't pad to 8 bytes on USG, since we aren't feeding input via stdio any more. Also, use newlines instead of # directives for advancing line number only a few lines. (cons_up_default_function): Punt padding for USG stdio, since we aren't using it any more. Use default_def for definition. Call store_pending_inline to save it away. (identifier_type): For TEMPLATE_DECL, DECL_RESULT field non-null indicates a non-type template, so don't return PTYPENAME. (yylex): If end-of-file and input isn't redirected, call do_pending_expansions and maybe start yylex over. Don't check TEMPLATE_EXPANSION_NAME_P; a proper name transformation system will eliminate conflicts. Try for SCOPED_TYPENAME with PTYPENAME too. Wed May 29 11:48:34 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * cccp.c (do_include): Check that ->control_macro is non-zero. * gcc.c (process_command): Use `error' in last change. Wed May 29 11:10:12 1991 Tom Wood (wood at dg-rtp.dg.com) * m88k.md (movdi): Accept CONST_INT. * out-m88k.c (output_load_const_dimode): Accept CONST_INT. (output_call): Don't use #plt for jsr. Wed May 29 00:51:36 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * cplus-type2.c (build_functional_cast): Give error if functional cast is missing argument. * cplus-tree.h (interface_unknown): Add a declaration for this variable. * cplus-type2.c (store_init_value): Normally initialized PIC data must be laid into the text segment and then copied into the data segment. But cecause of special things we do for ctors and dtors (the only things that can reference such things), we can leave vtables in initialized data space. * cplus-decl.c (finish_decl): Use #pragma interface knowledge if available for processing initialized variables of type const. Tue May 28 18:39:20 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * sched.c ({true,anti,output}_dependence): Correct MEM_IN_STRUCT_P code; only avoid conflict if MEM_IN_STRUCT_P ref has varying address. * protoize.c (stat): Remove declaration of stat; it is defined differently (no const in arg 1) on some machines. * combine.c (simplify_shift_const): Avoid infinite loops by quitting when COUNT becomes zero; delete now-unnecessary tests on COUNT. * flow.c (last_mem_set): New variable. (propagate_block): Initialize it. Show calls can change memory. (insn_dead_p): Remove unneeded arg STRICT_LOW_OK; don't treat STRICT_LOW_PART differently than ZERO_EXTRACT. All callers changed. If insn stores into the same, nonvolatile, MEM as recorded in last_mem_set, it is dead. (mark_set_1): If writing into register mentioned in last_mem_set or writing into memory, clear last_mem_set. Record last MEM written. (find_auto_inc): New function, from mark_used_regs. Add support for pre-increment and pre-decrement. (mark_used_regs, case MEM): Clear last_mem_set. Call find_auto_inc; move code to there. (mark_used_regs, case SET): Don't call recursively on MEM if it is SET_DEST, instead call find_auto_inc ourselves. Tue May 28 17:29:52 1991 Micheal Tiemann (tiemann at wookumz.gnu.ai.mit.edu) * gnulib1.c (__fixsfsi, __cmpsf2, __extendsfdf2): Add declarations for intify. * gcc.c (default_compilers): Accept `.cxx' as a C++ extension. Tue May 28 17:05:28 1991 Tom Wood (wood at dg-rtp.dg.com) * m88k.md (movstrsi): Pass original MEM expressions. * out-m88k.c (expand_block_move, block_move_{sequence,no_loop,loop}): Use original MEM expressions to set RTX_UNCHANGING_P, MEM_VOLATILE_P, and MEM_IN_STRUCT_P. * out-m88k.c (emit_bcnd): Use bxx when optimizing so jump_optimize will work on more cases. Change this back when jump_optimize uses get_condition to find the values being compared. * m88k.md: Don't use operand0 or operand1. Tue May 28 16:00:56 1991 Micheal Tiemann (tiemann at wookumz.gnu.ai.mit.edu) * emit-rtl.c (try_split): Make sure `after' exists before checking to see if it is a BARRIER. Tue May 28 15:08:44 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * gcc.c (process_command): Warn if -x follows last input file. * cccp.c: Don't include file twice if a #ifndef would make it a no-op. (struct file_name_list): New field, control_macro. Initialize it where these structures are created. (struct if_stack): Likewise. (do_include): If file already known, check its control macro if any. Don't include the file if the macro is now defined. (do_xifdef): Detect case of successful #ifndef at start of file. (condition_skip): Accept macro name as new arg. Record in if_stack. (do_endif): Detect being effectively at end of file. (record_control_macro): New function. Called from do_endif. * calls.c (store_one_arg): Set used after calling push_rounding. * sparc.md (floating move peepholes): Allow `r' for operand 2. * arm.md, tm-arm.h, out-arm.c, xm-arm.h: New files. * configure (arm): New alternative. Tue May 28 11:53:21 1991 Michael Meissner (meissner at osf.org) * tm-decstatn.h (CPP_PREDEFINES): Add Ultrix 4.2 support. * tm-mips.h (cmp_type, branch_cmp, branch_type): Global variables and type to record what type of comparison is being done. (mips_print_operand_punct): New array to specify whether a character is valid for print_operand as punctuation. (set_nomacro, set_noat, set_noreorder): New variables to record whether a .set nomacro, .set noat, or .set noreorder has been done. (dslots_{filled,total}_{load,jump}): New global variables to remember how many delay slots exist and are filled for the -mstats option. (CC1_SPEC): Combine %{O:...} %{O*:...} cases. For -G32, pass -G 32. Add dummy pattern for -save-temps to avoid error message. (DBX_DEBUGGING_INFO): Define this all the time. (SDB_ALLOW_FORWARD_REFERENCES): Define this for MIPS ECOFF support. (SDB_ALLOW_UNKNOWN_REFERENCES): Define this for MIPS ECOFF support. (TARGET_SWITCHES): Add -mstats to print interesting statistics. Add -mmemcpy to force memcpy to be called. Add -mdebug[fghij]. Add -mno- version of switches. (DATA_ALIGNMENT): Align all char/short arrays/unions/structures, rather than just char arrays. (BYTE_LOADS_ZERO_EXTEND): Define this. (CONST_OK_FOR_LETTER_P): 'N' returns true if power of 2. (EXTRA_CONSTRAINT): Redefine 'Q' to be 1 word memory references, 'R' to be multiword memory references. (struct frame_info): Add initialized field. (current_frame_info): New global structure to hold frame info. (INITIAL_FRAME_POINTER_OFFSET): Use current_frame_info. (INIT_CUMULATIVE_ARGS): Pass LIBNAME to init_cumulative_args. (DELAY_SLOTS_FOR_EPILOGUE): Define this to fill j $r31 delay slot. (ELIGIBLE_FOR_EPILOGUE_DELAY): Ditto. (ENCODE_SEGMENT_INFO): Don't flag references to 0-sized arrays as being in the small data segment. (CONST_COSTS): Reword to be more accurate. (RTX_COSTS): Define this. (ADDRESS_COST): Define this. (CLASS_CMP_OP, CLASS_EQUALITY_OP, CLASS_UNS_CMP_OP): New bits for rtx_classify to classify various comparison operators. (FINAL_PRESCAN_INSN): Define this to collect info for -mstats. (NOTICE_UPDATE_CC): Only do CC_STATUS_INIT if the insn is a comparison. (EXTRA_CC_MODES): Define new modes CC_EQmode, CC_FPmode, CC_0mode. (EXTRA_CC_NAMES): Define this. (SELECT_CC_MODE): Define this. (PRINT_OPERAND_PUNCT_VALID_P): Redefine this to index into mips_print_operand_punct. (DBR_OUTPUT_SEQEND): Reset .set reorder, .set macro as appropriate. * out-mips.c (branch_cmp, branch_type): New Global variables and type to record what type of comparison is being done. (mips_print_operand_punct): New array to specify whether a character is valid for print_operand as punctuation. (set_nomacro, set_noat, set_noreorder): New variables to record whether a .set nomacro, .set noat, or .set noreorder has been done. (dslots_{filled,total}_{load,jump}): New global variables to remember how many delay slots exist and are filled for the -mstats option. (reg_or_0_operand): Rewrite to add support for CONST_DOUBLE. (mips_const_double_ok): Allow normal FP constants (not Infinity, Nan, etc) to be used as operands when using the MIPS assembler. (simple_memory_operand): Combine GP memory references from gp_memory_operand. Delete gp_memory_operand. (equality_op): Return true if EQ or NE. (cmp_op): Return true if comparison operator. (uns_cmp_op): Return true if unsigned comparison. (mips_move_1word): New name for mips_move_instructions. Also, loads of HImode/QImode use unsigned loads, rather than signed loads, so that BYTE_LOADS_ZERO_EXTEND can be defined. Use %z to get name of $0, instead of hardwiring it. Explicitly use lui where appropriate. (mips_move_2words): New name for mips_move_2words_instructions. Use %z to get name of $0, instead of hardwiring it. (mips_address_cost): New function to define ADDRESS_COST macro. (gen_conditional_branch): New function to generate all of the tests and branches. (block_move_sequence): New function to generate straight line code for block moves. (block_move_call): New function to set up a call to memcpy/bcopy as appropriate for block moves. (expand_block_move): New function which is called from the movstrsi define_expand, to set up block moves. At present, unless -mmemcpy is used, moves of less than 32 bytes, get straight line code, all others get a call. (init_cumulative_args): Take libname as third argument. (function_arg_partial_nregs): Fix bug, to not return a negative number when passing small structs in registers. (compare_collect, compare_restore): Remove these functions, since they are no longer called. (override_options): Initialize mips_rtx_classify for all of the comparison operator bits. Initialize mips_print_operand_punct to return TRUE for each of the valid punctuation characters used in print_operand. (print_operand): %X now prints 32 bit ints in hex format. %z now prints $0 if the operand is the constant integer 0. %(, %) now turn on/off both .set noreorder/.set nomacro. %<, %> turns on/off .set nomacro. %* turns on both .set noreorder and .set nomacro if filling delay slots. %! turns on .set nomacro if filling delay slots. (compute_frame_size, save_restore, function_prologue, function_epilogue): Change the calling sequence of compute_frame_size to save everything in a global structure, which has an initialized field to indicate that compute_frame_size needs to be called. (function_prologue): INIT_CUMULATIVE_ARGS now takes 3 args. (function_epilogue): If current_function_epilogue_delay_list is non-null, use that to fill the final delay slot. Also, make sure the various asm .set's are reset properly. Write interesting statistics out to stderr if -mstats. (mips_epilogue_delay_slots): New function to return # of delay slots the epilogue needs. (null_epilogue): Return true if the function has a null epilogue, which allows the optimizer to omit jumps to the final j $31 if no stack was created. * mips.md (type attribute): Redo how the type attributes work, and change some names. (mode attribute): New attribute to describe the insn's result mode. (length attribute): New attribute to give insn length in words. (dslot attribute): New attribute to return whether an insn needs a delay slot. (define_delay): Use dslot and length attributes to determine if a delay slot is needed. (define_function_unit): Define all of the function units now. (all patterns): Provide new attribute definitions. (all memory reference patterns): modify alternatives to use 'Q' for 1 word instructions, 'R' for multiword instructions. (unnamed patterns): Provide names for all patterns, so that -dp will pinpoint exactly which pattern is used. (*divsi3, *divmodsi4, *modsi3): If optimizing and not -mdebugc, use the *divmodsi4 patterns, so that the opimizer will only use 1 divide if doing a = b / c; d = b % c; This replaces the peepholes, which previously were used for this. If not optimizing, use the normal div/mod patterns. (zero_extendqihi2, extendqihi2): Allow zero/sign extending from memory. (fixuns_trunc{df,sf}si2): Use generator patterns to generate appropriate branches. (movsi_ulw, movsi_usw): New patterns to generate the appropriate unaligned load/store for use in the block move expansion. (mov*): Provide all possible combinations of moves. (movstrsi): New pattern to generate block moves. (negsi2): Change to a define_expand, which uses minus. (one_cmpsli2): Change to a define_expand, which use the nor pattern. (cmp*, b*): Redo comparison/branch completely to save things in global variables, call the common C code to expand the branch, and provide match_operators to do the actual branch. (s*): Provide for the ability to set a register with an integer comparison, without using a branch. * make-decrose (AUX_OUTPUT2): Delete macro, since aux-output.c is always compiled separately now. (LANGUAGES): Suppress G++, Objc temporarily. (cse.o): Rebuild cse if the config files change, to get new cost functions, no longer rebuild calls/function since the FUNCTION_ARG macros just call functions in out-mips.c. (SRCS): Change $(AUX_OUTPUT2_SRC) to aux-output.c. * make-mips (AUX_OUTPUT2): Delete macro, since aux-output.c is always compiler separately now. (CONFIG2_H): Add rules to rebuild selected modules when the tm-mips.h file changes. (mips-tfile): Rules to build mips-tfile. (mips-tdump): Rules to build mips-tdump. (LANGUAGES): Suppress G++, Objc temporarily, build mips-tfile. * mips-tfile.c (whole file): New file to put the MIPS specific debug information into the object file, after the assembler has been run. This is needed because the MIPS assembler provides no method of setting up the debug information for local variables. This is enabled by the make-mips Makefile modifier. * mips-tdump.c (whole file): New file to dump the contents of the MIPS ECOFF symbol table in a symbolic format. This is not currently built by default, but make-mips contains rules to build it. * tm-decrose.h (MD_EXEC_PREFIX): Change to use the test prefix /usr/ccs/gcc-2.00/gcc- instead of the release prefix /usr/ccs/gcc. (WCHAR_TYPE_SIZE): Define as 16. (WCHAR_UNSIGNED): Define as 1. (DBX_DEBUGGING_INFO): Define moved to tm-mips.h. Tue May 28 06:26:44 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * expmed.c (store_bit_field, extract_bit_field): If -fforce-mem specified, copy OP0 into register (and back again, for store). * sched.c (memrefs_conflict_p, {true,anti,output}_dependence): Add missing parens. * reload.c (find_reloads): Turn usage of reg_preferred_class back on now that the code has been refined. Mon May 27 12:41:14 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * c-typeck.c (build_binary_op_nodefault): Set converted for shifts, so op1 is not converted to the result type. Clean up some warning messages. * expr.c (expand_expr): Use temp stack slot for BLKmode SAVE_EXPR. * Makefile.in (alloca.o): Use new vars ALLOCA_FLAGS and ALLOCA_FINISH. Mon May 27 05:42:20 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * sched.c ({read,true,anti,output}_dependence): Remove unused arg INSN. All callers changed. * combine.c (subst, case PLUS): Fix typo in (plus (plus X C) Y) case. (subst, case MULT): Distribute MULT over PLUS to try to simplify it. Mon May 27 05:15:16 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * tm-sparc.h (GO_IF_LEGITIMATE_ADDRESS): Don't accept a SYMBOL_REF sum if FLAG_PIC is not 1. This forces the -fPIC to take effect, even when the optimizer knows how to stitch together HIGH and LO_SUM combinations. (PRINT_OPERAND): Move body to out-sparc.c. * out-sparc.c (print_operand): New function, implementing actions of old PRINT_OPERAND macro. Comments written for all cases. (reg_unused_after): Don't do anything special with JUMP_INSNs. Only do something special with CALL_INSN if REGNO is a call-used reg. * cplus-type2.c (store_init_value): Back out 23 Feb change, which was completely backward. * dbxout.c, cplus-dbxout.c (dbxout_parms): Also test that TREE_TYPE (PARMS) is not ERROR_MARK_NODE. * cplus-init.c (build_up_reference): Check FLAGS parameter to see if we can accept building a reference to a constructor-generated temporary. (various places): Change calls to `build_up_reference' that used to use an explicit `1' to use LOOKUP_PROTECT instead. (build_offset_ref): Use IDENTIFIER_TYPE_VALUE macro to the the type associated with CNAME. * cplus-class.c (build_vbase_path): Fix 11 May change by only changing TREE_TYPE (EXPR) if NULL_EXPR. We might build different vbase paths for the same expr in multiple inheritance initialization. * Makefile.in: Change sed script so it matches '^# ' instead of just '^#'. This allows processing of md files with #if/#endif controls in their C function bodies. * cplus-tree.c (build_cplus_new): Set TREE_SIDE_EFFECTS on RVAL. * stmt.c (warn_if_unused_value): Don't warn about EXIT_EXPRs. (expand_decl_cleanup): Add missing type declarations for parameters. * cplus-call.c, cplus-class.c, cplus-dbxout.c, cplus-edsel.c: Include stdio.h after cplus-tree.h since the latter references printf. * cplus-search.c, cplus-xref.c: Likewise. * cplus-class.c (prev_class_type): Not static; defined in cplus-tree.h. * cplus-decl.c (builtin_function, auto_function): Don't put & in front of function name. * cplus-typeck.c (comptypes,comp_target_types): Likewise. * cplus-search.c (report_ambiguous_mi_virtuals): Likewise, for arrays. Sun May 26 22:47:35 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * cplus-decl.c (make_temporary_for_reference): New function. Split out code from `grok_reference_init' so we could call it in two places: where it was called before, and when initializing a reference through a constructor for a temporary. (grokdeclarator): Give error message instead of aborting if user gave method qualifiers for function decl. (start_function): Switch to temporary obstack before computing destructor and constructor labels, and before building the function's RESULT_DECL. * cplus-decl.c (store_parm_decls): Make a cleanup that controls the action of the garbage collector. This ensures that the call to __gc_pop doesn't get skipped in the function issues a return stmt. * cplus-gc.c (expand_gc_prologue_and_epilogue): Work with new cleanup model. * cplus-gc.c (build_i_desc): Figure out whether the i_desc should constitute a defn of its type or not. * cplus-typeck.c (c_expand_return): Look through TARGET_EXPR as well as NEW_EXPR for returning addresses of local variables. * reload.c (find_reloads): Intialized `goal_alternative_swapped' where `swapped' is initialized to zero. Sun May 26 21:29:26 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * recog.c (const_double_operand): Fix typo. * reload1.c (choose_reload_regs): Fix typo--swap #endif with }. * loop.c (init_loop): Multiply copy_cost by 2. (general_induction_var): Use rtx_cost directly. (expr_benefit): Function deleted. * m68k.md (andsi3): Generate bclr if appropriate. * cccp.c (do_undef): Just a warning, if deleting something unusual. Sun May 26 18:51:33 1991 Jim Wilson (wilson at sphagnum.cygnus.com) * expr.c (force_operand): When calling recursively, use a temporary to force evaluation of calls. The C language allows `f (g (x), g (y))' to be evaluated in different orders on different hosts, which could lead to different code generation for different hosts. * recog.c (const_double_operand): New function for recognizing CONST_DOUBLE rtx's. * expmed.c (expand_mult_add): Add new parameter TARGET which is a suggestion of where to store the result; pass it to expand_expr. * loop.c (emit_iv_add_mult): Pass REG to expand_mult_add call as target for the result. * gmicro.md, old-sparc.md, pyr.md: Delete obsolete UMULT patterns. * expmed.c (expand_mult): Convert DImode constants to a CONST_INT if possible, so that multiplies by these can be optimized by the existing code. Sun May 26 00:59:42 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * gcc.c (process_command): -save-temps is always valid. * varasm.c (output_constructor): Don't crash if val == 0. * cse.c (refers_to_mem_p): Handle constant addresses. * cccp.c (main): Don't store thru last_include if null. Sat May 25 06:33:19 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * reload.c (find_reloads): Don't assume we have at least two operands when we check for a simple copy. * sched.c (update_reg_known_value): Deleted. (init_alias_analysis): If have REG_EQUIV note, can always use NOTE's value irrespective of number of sets. Take known value from note, not SET_SRC. (memrefs_conflict_p): Remove gotos. ASHIFT can't occur in an address. (true_dependence, anti_dependence, output_dependence): Take into account the fact that a MEM_IN_STRUCT_P reference cannot conflict with a non-MEM_IN_STRUCT_P reference at a fixed address. Fri May 24 11:34:39 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * Makefile.in (cplus-tab.c): Put back -d option. Fri May 24 06:46:07 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * rtl.c (rtx_alloc): Ensure we keep the obstack aligned. Fri May 24 00:17:13 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * reload1.c (choose_reload_regs): Try with inheritance, then without. #if 0 the code to avoid inheritance in certain cases. Fri May 24 00:13:40 1991 James Van Artsdalen (james at bigtex.cactus.org) * out-i386.c (split_di): Check for CONST_DOUBLE before CONSTANT_P. * tm-i386.h (LIMIT_RELOAD_CLASS): new macro. (PREFERRED_RELOAD_CLASS): a CONST_DOUBLE can appear in narrower classes than GENERAL_REGS. * reload.c (push_reload): Limit reload class even if the SUBREG has already been stripped. Thu May 23 11:08:21 1991 Jim Wilson (wilson at sphagnum.cygnus.com) * sched.c (schedule_insns): Don't schedule a block if the only insn is a CODE_LABEL. Thu May 23 07:54:57 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * reload1.c (choose_reload_regs): Process reload in first pass if a subsequent reload requires fewer registers. Change criteria for processing from being a strict superset to having an intersecting, non-equal class. Ignore optional and turned-off reloads in loop to see what is forced to be allocated in first pass. * toplev.c (compile_file): Fix typo in length of string to allocate for sched2 dump's name. * jump.c (find_cross_jump): Don't crash if single_set returns 0. * recog.c (general_operand): A SUBREG of a constant is never valid. * local-alloc.c (qty_compare, qty_compare_1): Make priority function the same as in global-alloc: quantities with shorter lives are allocated first. This can speed up some code by a factor of three. Wed May 22 17:40:49 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * reload1.c (emit_reload_insns): Fix some minor bugs in making REG_DEAD notes and recording insn that does store; code sometimes assumed that each call to gen_move_insn produced at most one insn. Wed May 22 16:51:53 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * reload.c (push_reload): Support LIMIT_RELOAD_CLASS. Wed May 22 14:14:51 1991 Micheal Tiemann (tiemann at wookumz.gnu.ai.mit.edu) * jump.c (jump_optimize): Update the three simplifications that start with the "if (...) x = 1;" case. Add comments explaining how to make them more machine independent, and comments explaining how they might fail in the future. Ifdef out the second case, and add code explaining why it does not work. * rtl.h: Put definition of FUNCTION_FLAGS_USES_CONST_POOL here. * integrate.c: Remove definition of it here. * integrate.h: New fields in struct inline_remap, min_insnno and max_insnno, which indicate the range of insns covered by insn_map. * integrate.c (expand_inline_function): Set min_insnno and max_insnno. Wed May 22 12:31:53 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * tm-vaxv.h (ASM_OUTPUT_LOCAL): Use data_section. * protoize.c (fancy_abort): Define it. * objc-parse.y (yyprint, set_yydebug): New functions. * tree.h (gettags, get_permanent_types, get_temporary_types): Declare them. * Makefile.in (protoize.o, unprotoize.o): Use the standard flags and include dirs. Don't use -Wall. * protoize.c (abort): Declaration deleted. * cccp.c (main): Ensure `next' field in directory list is initialized. Wed May 22 09:27:49 1991 James Van Artsdalen (james at bigtex.cactus.org) * expmed.c (synth_mult): Return cost of -1 if shift is too expensive. Wed May 22 07:53:52 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * out-sparc.c (output_move_double): More SImode->Pmode fixes. Wed May 22 02:43:02 1991 Micheal Tiemann (tiemann at wookumz.gnu.ai.mit.edu) * Makefile.in, emit-rtl.c, explow.c, final.c, global-alloc.c, gnulib2.c, hard-reg-set.h, regclass.c, reload1.c, cccp.c: Fix typos and indentation. Wed May 22 00:14:37 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * combine.c (try_combine): Add to last change; handle subreg in src as well as in dest of i3. Tue May 21 22:32:08 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * m68k.md (dbra): Rewrite pattern so it reflects simplifications that combine will make. Tue May 21 10:44:05 1991 Jim Wilson (wilson at sphagnum.cygnus.com) * loop.c (strength_reduce): When a loop-vtop note is encountered, reset `not_every_iteration'. Tue May 21 00:17:31 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * c-decl.c (init_decl_processing): Always use long type for size_t. * varasm.c (assemble_variable): Use ASM_DECLARE_OBJECT_NAME. * protoize.c: Include config.h. (chmod, kill): Declarations deleted. They aren't needed, and can conflict with system headers. (wait): BSD declaration deleted. (save_def_or_dec): Add missing fprintf arg. * tm-next.h (EXTRA_FORMAT_FUNCTIONS): Fix typo. * protoize.c: Use USG and VMS as most files do. Don't expect BSD to be necessary defined outside this file. Define getwd using getcwd, not vice-versa, to be like dbxout.c. * cccp.c, SYSCALLS.c: Use USG and VMS as most files do. Don't expect BSD to be necessary defined outside this file. Mon May 20 16:54:17 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * tm-i386.h, tm-att386.h, tm-bsd386.h, tm-sun386.h (ASM_BYTE_OP): Renamed from ASM_BYTE. * varasm.c (ASM_BYTE_OP): Likewise. * c-decl.c, cplus-class.c (finish_struct): Typo: Had PCC_BIT_FIELD_MATTERS which is now PCC_BITFIELD_TYPE_MATTERS. * gcc.c (handle_braces): Don't deref input_suffix if null. Mon May 20 15:19:27 1991 Michael I Bushnell (mib at geech.gnu.ai.mit.edu) * cccp.c (pcfinclude): STRINGDEF struct is now longword aligned. Mon May 20 14:26:18 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * sparc.md: Remove all arithmetic, logical, and shift patterns for sub-SImode operands. Also fix some DImode patterns. * out-sparc.c (emit_move_sequence): Simplified considerably. * rtl.c (rtx_alloc): Inline-code an optimized obstack_alloc. * cplus-lex.c (make_{pointer,reference}_declaration): Call `build_parse_node' instead of `build1' so memory can be freed. * cplus-parse.y: Remove unneeded epsilon rules to produce an average 15% reduction in the number of reductions performed. * cplus-parse.y (RETURN_INIT): Use new interface to speed up grammar. * cplus-decl.c (store_return_init): Use new interface. Mon May 20 11:16:34 1991 Jim Wilson (wilson at sphagnum.cygnus.com) * sched.c (schedule_block): A register which dies in a CALL_INSN does not cross calls. A single insn block must be scheduled, to ensure that register lifetime info is corrected updated. Mon May 20 06:50:37 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * combine.c (try_combine): Don't combine when I1 and I2 both feed into I3 and I1 uses the register set in I2. * reload.c (find_reloads): Prefer pseudos over other things we may reload. Mon May 20 02:02:15 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * combine.c (try_combine): Test MODES_TIEABLE_P when i3 src is subreg. * m68k.md (trunc*): Don't set cc if use wider insn. Sun May 19 14:45:46 1991 Ron Guilmette (rfg at ncd.com) * Makefile.in (clean): Delete stage1...stage4. (realclean): Delete cexp.output. * fixincludes: Handle BSD43__IO* and BSD43_CTRL like IO* and CTRL. Sun May 19 15:00:05 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * reload1.c (count_possible_groups): New function. (reload): Call it twice. This checks for possible groups after maybe spilling some single regs. * configure (magnum, m3230): Aliases for mips/mips. * fixincludes (machine/cpu.h): Create in proper dir. Fix mips/cpu.h too. * reload.c (find_reloads): Turn off usage of reg_preferred_class. Sun May 19 09:51:24 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * flow.c (mark_used_regs): Continue putting REG_DEAD notes on fixed registers. * regclass.c (reg_class_record): Don't count classes in which objects won't fit. * reload.c (find_reloads): Pre-compute preferred classes for each operand; if operand 1 is copied to operand 0, merge the classes. REJECT is now only 1/3 as costly as LOSERS; ? adds 3 to REJECT so that it's semantics don't change. * expr.c (compare_from_rtx): Do EQ and NE comparisons unsigned since they are usually cheaper and will cse with comparisons against zero which are already unsigned. * reload1.c (choose_reload_regs): Don't try to access reload_out for disabled reload (reload_strict_low may not have been cleared). * reload1.c (choose_reload_regs): Don't let optional reloads inherit spill regs until all non-optional reloads have been allocated spill regs. We can use find_equiv_reg even if must_reuse, we just can't get a spill reg that way. * expr.c (do_tablejump): When using LABEL_REF in arithmetic, make it in Pmode instead of VOIDmode. * function.c (fixup_var_refs_1): Don't try to make paradoxical memory SUBREGs; instead keep SUBREG_REG a pseudo and copy between memory and the pseudo. (fixup_memory_subreg): Abort if we try making paradoxical SUBREGs. * reorg.c (redundant_insn_p): Insns we pass may reference resources set by INSN; it is sufficient that they not set resources in INSN. Sun May 19 08:06:17 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * tm-sparc.h (STRUCT_VALUE): Change SImode to Pmode here, and in other places. (FIRST_PARM_OFFSET): Change 4 to UNITS_PER_WORD here, and in other places. (ROUND_ADVANCE): New macro to compute how far to advance the arg pointer for a give parameter. (FUNCTION_ARG): Use PARM_BOUNDARY instead of 32. (EXTRA_CONSTRAINT): Don't depend on `reload_completed'. * sparc.md (various places): Change many DImode predicates from `general_operand' to `register_operand'. * jump.c (find_cross_jump): Fixed 18 May change to use `validate_change' to make sure we get valid, initialized values regardless of which path we choose. Sat May 18 15:07:29 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * cccp.c: Rename FATAL_EXIT_CODE to FAILURE_EXIT_CODE. * gnulib1.c: Rename SFVALUE to FLOAT_VALUE_TYPE. (union flt_or_value): New type. (*): Use that instead of flt_or_int in most places. Delete some variables `intify' that aren't needed. * tm-i386.h: Rename SFVALUE to FLOAT_VALUE_TYPE. * stor-layout.c (layout_record): BITFIELD_NBYTES_LIMITED now 1 or 0. * rtl.h (struct rtx_def): Drop SHORT_ENUM_BUG; keep ONLY_INT_FIELDS. * loop.c (add_cost, copy_cost): Variables replace old macros *_BENEFIT and COPY_PENALTY. (init_loop): New function to set the variables. (expr_benefit): Use rtx_cost. * toplev.c (compile_file): Call init_loop. * cse.c (rtx_cost): Treat mult by 2**n as a shift by default. * toplev.c (output_file_directive): Typo in ASM_OUTPUT_MAIN_SOURCE_FILENAME. * gnulib2.c [L_trampoline]: Rename function to __trampoline. Always compile it even if empty. Make it global. Sat May 18 14:11:37 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * reload.c (find_reloads): Remove unnecessary test when increasing cost of alternative due to non-preferred register class. * reload1.c (choose_reload_regs): Fix typo. * tm-rs6000.h: Add hard registers for the 8 CR fields; add classes CR0_REGS and CR_REGS. Don't use CC0; add CCUNSmode and CCFPmode. (FIXED_REGISTERS): r31 (fp) is no longer fixed. (REG_CLASS_FROM_LETTER): Remove 'd' for GENERAL_REGS; 'r' already means this. (CONST_DOUBLE_OK_FOR_LETTER): If we can move a constant in two insns for DF or one insn for SF, let it match 'G'. (SECONDARY_RELOAD_CLASS): Define this new macro. (FUNCTION_ARG): Fix typo in testing nargs_prototype. (LEGITIMATE_CONSTANT_P): Always return 1. (FIXUNS_TRUNC_LIKE_FIX_TRUNC): Do not define. * rs6000.md: Don't use CC0; instead use a pseudo which will be assigned to CR_REGS or CR0_REGS. Make variants of arithmetic insns that set only the condition code and that set both the condition code and a normal result. Delete "cc" attribute and add "type" attribute. Define delays for cc-setting insns and for loads. Replace `d' constraint with `r'. Delete patterns for HImode and QImode arithmetic operations. Handle putting "easy" DFmode or SFmode constant into a register. Rework compare and branches; add scc insns. Fix up decrement-and-branch insns, but they still won't be used yet. (call insns): Use pseudo for "lr" in indirect calls. (movdf, movsf): Explictly handle need to use memory to copy between general and FP registers. * out-rs6000.c (next_insn_tests_no_unsigned, unsigned_comparisons_p): Deleted. (update_cc): Likewise. (gen_reg_operand): Tighen up a bit. (cc_reg_operand, reg_or_u_short_operand, easy_fp_constant): New fns. (fp_reg_or_mem_operand, mem_or_easy_const_operand): Likewise. (call_operand): Accept pseudo register. (branch_comparison_operator, scc_comparison_operator): New functions. (secondary_reload_class, ccr_bit, must_save_cr): Likewise. (print_operand, case 'w', 'u'): Support CONST_DOUBLE. (print_operand, cases 'W', 'f', 'F', 'R', 't', 'T', 'C', 'D'): New cases. (print_operand, cases 'j' and 'J'): Now use for bit number in CCR. (output_{pro,epi}logue): If we call function to save/restore fpr's, we need to save/restore LR. Save CR if we modify the call-saved fields. * romp.md: Delete HImode and QImode arithmetic operations. (swapxi): Delete; obsolete and never used. * tm-a29k.h (TARGET_SWITCHES): Change -mnodw to -mndw. Add -m{no-,}reuse-arg-regs. (SECONDARY_RELOAD_CLASS): Provide a definition for this new macro. * a29k.md: Delete all HImode and QImode arithmetic operations. * out-a29k.c (secondary_reload_class): New function. (incoming_reg): Look at TARGET_NO_REUSE_ARGS. * reload1.c (eliminate_regs): Don't remove a PLUS unless inside an address since it would need to change INSN_CODE and can't do it here. * reorg.c (uid_to_ruid, max_uid): New vars. (mostly_true_jump): Refine prediction slightly. Use uid_to_ruid map to accurately see if branches are backward. (relax_delay_slots): Pass condition to mostly_true_jump. (dbr_schedule): Allocate and build uid_to_ruid map. Sat May 18 12:54:45 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * cse.c (insert): "Unchanging" pseudos count as constant. * tree.c (make_node): Rewrite end as a switch. Sat May 18 03:51:06 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * cse.c (FIXED_BASE_PLUS_P): Since this is used when called from `expand_inline_function', also catch the case where the base register is VIRTUAL_STACK_VARS_RTX. (simplify_binary_operation): In EQ and NE case, convert a COMPARE operand to something we can optimize. (refers_to_mem_p): Handle the case when `base' is a LO_SUM. * integrate.c (FIXED_BASE_PLUS_P): Define this to recognize offsets from the various virtual registers. (expand_inline_function): Expand exprs using EXPAND_SUM so as to get stack frame addresses instead of pseudos. This yields much better cse (at little cost) for GNU C++. Also, test FIXED_BASE_PLUS_P as an alternative to CONSTANT_P to record a known register value. * jump.c (find_cross_jump): If we are processing a cross jump and the insns fail to match, try looking for a REG_EQUAL note that makes them equivalent insns. If found, keep going. This is important for merging cleanup codes when one cleanup path gets frame address in a register when the other path gets the frame address explicitly. * cplus-init.c (build_delete): Fixed residual use of 1-based indexing to use 0-based indexing instead. * cplus-decl2.c (grokclassfn): Fix raeburn's May 12 change so that destructors still have the same name. * cplus-decl.c (decls_match): Remove dependence on MERGED. * cplus-class.c (build_vbase_path): Fixed bug in computing offsets for exprs which are FIXED_TYPE_P. (build_vfn_ref): Change initializer for REF from 0 to NULL_TREE. * cplus-decl.c (maybe_build_cleanup): Add LOOKUP_NONVIRTUAL to flags argument in call to `build_delete' if DECL does not use virtual baseclasses. If it does, we go through a function call to save space, unless FLAG_EXPENSIVEO_OPTIMIZATIONS is nonzero. ??Better approach is to know, in expand_cleanups, to clear `flag_no_inline' during the cleanup's expansion. * cplus-*.c (various places): Add LOOKUP_DESTRUCTOR to all places where we know we are calling a destructor for a non-null object. * stmt.c (fixup_gotos): Run destructors on cleanups that come from the block being exited, in addition to any inner blocks for which LABEL is now defined. (expand_return): Take care of destructors that occur in the current binding level. (fixup_cleanups): If we emitted no insns, don't change *BEFORE_JUMP. * rtlanal.c: Define `target_flags' here... * toplev.c: ...not here. This enables us to link gen* programs which might, through rtlanal.o, pull in references to `target_flags' that are never used. * function.c: Add declaration for `current_function_uses_const_pool'. * expr.h: Add extern declaration for that variable. * function.h (struct function): Add a slot named `uses_const_pool' for `current_function_uses_const_pool'. * function.c ({push,pop}_function_context): save and restore the value of `current_function_uses_const_pool'. * rtl.h (FUNCTION_FLAGS_USES_CONST_POOL): Defined to be 0200. * integrate.c (initialize_for_inline): FUNCTION_FLAGS_USES_CONST_POOL now contributes to the value of `function_flags'. (output_inline_function): Restore `current_function_uses_const_pool' from `function_flags'. (save_for_inline_copying): Only call `save_constants' if `current_function_uses_const_pool' is nonzero. (save_for_inline_nocopy): Ditto. (save_constants): Tweaked to perform its treewalk faster. Notably, it no longer accepts ptrs to NULL rtl. All callers changed. * varasm.c (force_const_mem): Set `current_function_uses_const_pool' if we create a constant pool reference. * cplus-parse.y, c-parse.y: Add new function `set_yydebug'. If YYDEBUG is defined, sets `yydebug' to VALUE. Otherwise, prints warning that operation is invalid. * toplev.c (main): Call `set_yydebug' instead of setting `yydebug' directly. This allows user to turn YYDEBUG off for faster parsing. * cse.c (simplify_binary_operation): Eliminate abort when passed DImode operands. Fri May 17 21:56:41 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * hard-reg-set.h (reg_class_superunion): New var. * regclass.c (init_reg_sets): Compute reg_class_superunion. (reg_classes_intersect_p): New function. * reload.c (find_reloads): Alternative is discouraged if it puts a pseudo in a register class it doesn't prefer. * reload1.c (basic_block_needs): Now an array, per register class. (reload): Compute separate basic_block_needs for each class. (spill_hard_reg): If pseudo is only in one block, see if that block needs a spill register of a class containing the hard reg; leave the pseudo alone if not. * reload1.c (reload_mode, reload_nregs): New vars. (reload_reg_class_lower): Use them. (allocate_reload_reg): New function. (choose_reload_regs): Track size and class of any groups. We can inherit reloads if we are the size of the largest group or if our class is disjoint from those needed for groups. Try all inherits first before all spill register allocations unless there is a later reload with a smaller class; call allocate_reload_reg to do the actual allocation. Use new vars above. (emit_reload_insns): Delete output reload even if we weren't storing to memory. * reload.h (reload_secondary_reload, reload_secondary_p): New vars. * reload.c (push_reload): If secondary reload register is needed, make a secondary reload. * reload1.c (reload): Reload with reload_secondary_p nonzero is in use. (choose_reload_regs): Likewise. (emit_reload_insns): Handle secondary reloads, when needed. * reload1.c (reload): Add pass to remove death notes for things that are no longer registers or don't die if we must preserve death notes. (emit_reload_insns): Refine REG_DEAD notes to be more accurate; make notes for secondary reloads. * reload1.c (emit_reload_insns): Abort for output reloads for jumps; we have to implement this at some point. Fri May 17 20:08:22 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * protoize.c: Handle ultrix like BSD. Fri May 17 15:56:41 1991 Richard Stallman (rms at geech.gnu.ai.mit.edu) * Pass library function name to INIT_CUMULATIVE_ARGS. * calls.c (expand_call): Pass extra arg to INIT_CUMULATIVE_ARGS. * expr.c (emit_library_call): Likewise. * function.c (assign_parms): Likewise. * tm-*.h (INIT_CUMULATIVE_ARGS): Accept the extra arg. (INIT_CUMULATIVE_INCOMING_ARGS): Likewise, just for symmetry. Fri May 17 15:41:22 1991 James Van Artsdalen (james at bigtex.cactus.org) * tm-i386v4.h (ASM_OUTPUT_COMMON): Don't attempt alignment on a three byte boundary. Fri May 17 15:25:16 1991 Tom Wood (wood at dg-rtp.dg.com) * function.c (assign_stack_local, assign_outer_stack_local): Make the alignment in bytes. Fri May 17 14:31:00 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * cplus-class.c (build_vbase_path): Only build a COND_EXPR if NONNULL is zero. (resolves_to_fixed_type_p): Check TREE_HAS_CONSTRUCTOR for CALL_EXPRs and INDIRECT_REFs. * cplus-call.c (build_method_call): Add call to `constructor_name' if BASETYPE changes. * cplus-init.c (build_new): Add LOOKUP_NONVIRTUAL to FLAGS argument to `build_method_call'. Constructors are never virtual. Also, set TREE_HAS_CONSTRUCTOR bit for return value from `build_method_call'. Thu May 16 21:36:10 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * rtl.h (CONSTANT_P): Now true for a CONST_DOUBLE. * combine.c, cse.c, emit-rtl.c, expr.c, integrate.c, loop.c: Update for new meaning of CONSTANT_P to include CONST_DOUBLE. * optabs.c, recog.c, reload.c, reload1.c, rtl.h, rtlanal.c: Likewise. * romp.md, rs6000.md, out-alliant.c, out-convex.c: Likewise. * out-gmicro.c, out-i386.c, out-i860.c, out-m68k.c: Likewise. * out-sparc.c, out-spur.c, out-tahoe.c: Likewise. * combine.c (SUBST, SUBST_INT): If INTO equals NEWVAL, don't record the substitution. (try_combine, subst, make_compound_operation, simplify_and_const_int): No longer need check for changes before using SUBST macro. (simplify_shift_count): Likewise. * integrate.c (copy_rtx_and_substitute, case CONST): If what was originally a constant becomes something that is not a constant when passed through a recursive call, return it without the CONST. * rtl.c (copy_most_rtx): New function. * rtl.h (copy_most_rtx): Declare it. * function.c (fixup_var_refs_1, case MEM): If a MEM contains VAR, ensure the MEM isn't shared by copying it. * expmed.c (expand_divmod): If doing MOD, produce divide result into unique pseudo so that we might CSE the division. Thu May 16 12:01:42 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * reload.c (push_reload): Try find_dummy_reload before dead regs. * function.c (assign_stack_local*): Use GET_MODE_ALIGNMENT. Use CEIL_ROUND consistently. Don't force word alignment even if STRICT_ALIGNMENT (experiment). Thu May 16 10:31:04 1991 Jim Wilson (wilson at sphagnum.cygnus.com) * unroll.c (unroll_loop): Don't abort if start label does not immediately follow LOOP_BEG note. This can happen as a result of jump threading. * reorg.c (mostly_true_jump): Eliminate repeated test in second loop. * sched.c (priority): Abort if find a NOTE in a groups of insns that must be scheduled together. (free_pending_lists): New function. Moves every *_LIST rtx on the pending lists to the free list. (add_insn_mem_dependence): Get a *_LIST from the free list instead of creating one if possible. (sched_analyze_1): Don't move an insn across a call if it uses a register that is not already live across calls. (sched_analyze_insn): Likewise. (sched_analyze_1): When flusing the pending lists, put the *_LIST rtx on the free list. (sched_analyze): Likewise. (schedule_block): Likewise. (sched_analyze_2): For a cc0 setter/user pair, put a copy of all dependencies on the first insn onto the second insn. (sched_analyze_insn): Likewise for call sequences. (sched_analyze_insn): Handle REG_INC notes just like SETs. (sched_note_set): Handle hard registers same as psuedo regs. (attach_deaths): Likewise. Don't add REG_DEAD notes to the frame pointer, arg pointer or stack pointer. (schedule_block): Likewise. (rank_for_schedule): Do not check whether each insn of a sequence that must be scheduled together is ready. They will only reach here if they are all already ready. (schedule_block): After reload, don't need to give special treatment to insns at function start which set up the function parameters. Don't treat tail specially if it is part of a group that must be scheduled together. When a group of instructions is scheduled together, run the lifetime analysis code on every instruction in the group from last to first. A call_insn kills all call_used and global regs except those explicitly used by the call_insn. (schedule_insn): Initialize new variables. If USE_C_ALLOCA, free alloced memory immediately after each schedule_block call, not once at the end. * rtl.c (add_dependence): When adding a dependence that points to an insn that is part of a sequence that must be scheduled together, make the dependence point to the last insn of the sequence instead. Wed May 15 13:08:32 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * combine.c (simplify_and_const_int): If we have (and (OP (lshiftrt X Y) Z) C), for OP of IOR, XOR, and NOT, commute OP and LSHIFTRT to put AND and LSHIFTRT adjacent to try to form ZERO_EXTRACT. * combine.c (subst, gen_lowpart_for_combine, get_last_value_validate): Use object's mode instead of VOIDmode when we make (clobber (const_int 0)) in case someone uses the mode for significant bits. * rtlanal.c (side_effects_p): Reject non-VOIDmode CLOBBERs. * rtlanal.c (reg_set_p_1): Remove test for `reg_set_reg' being MEM. (reg_set_p): Abort if passed a MEM. * toplev.c (strip_off_ending): Strip trailing ".f". Wed May 15 12:54:18 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * cplus-typeck.c (build_modify_expr_1): If the TREE_TYPE of the recursive result is an ARRAY_TYPE, change it to void_type_node so build_compound_expr doesn't lose when calling default_conversion. * cplus-tree.h (lang_type): Remove AS_LIST field from lang_type. Use TYPE_MAX_VALUE field of type instead. (TREE_REFERENCE_EXPR): New macro. * cplus-parse.y (LC): If we are not in temporary allocation, call permanent_allocation. This frees up any PARM_DECL nodes that were allocated since we processed an inline function. NOTE: we still have to clean up these parms from inline functions that did not go inline. * cplus-decl.c (store_parm_decls): Since we no longer push an extra binding level if ! PARMS_HAVE_CLEANUPS, test CLEANUP_LABEL to figure out how far up the binding countours we must look. (init_decl_processing): If FLAG_NO_INLINE is nonzero, set FLAG_DEFAULT_INLINE to zero. * cplus-class.c (finish_struct_bits): Copy TYPE_MIN_VALUE and TYPE_MAX_VALUE. These actually hold C++-related data that's moved up from the lang_type data structure. * cplus-*.c: Change REFERENCE_EXPR to CONVERT_EXPR. Set TREE_REFERENCE_EXPR bit to indicate a CONVERT_EXPR that's really the address of a C++ reference expression. Wed May 15 12:30:26 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * tm-sparc.h (FIXED_REGISTERS): Register 0 is not fixed; it is used for the condition code, not to represent the fixed %g0. Tue May 14 18:59:06 1991 Jim Wilson (wilson at sphagnum.cygnus.com) * explow.c (find_next_ref): Start search at first insn after INSN. * jump.c (jump_optimize): Update the three simplications that start with the "if (...) x = 1; else {...} if (x) ..." case, so that when HAVE_cc0 is not defined, they do not accept TST insns (which could just be a register to register move). They should only accept insns with the COMPARE operator. Tue May 14 14:51:33 1991 Tom Wood (wood at dg-rtp.dg.com) * cse.c (simplify_binary_operation): Don't abort when comparing two CONST_DOUBLE values. Tue May 14 11:35:47 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * c-common.c (decl_attributes): Fix typo in name of attribute. It should be `aligned'. Also don't crash on unknown attribute. * expmed.c (init_expmed): Make a separate object to free back to. * hard-reg-set.h (HOST_BITS_PER_LONG_LONG): Provide default definition. * toplev.c (main): Implement -gdwarf. Tue May 14 06:32:48 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * flow.c (mark_used_regs): Don't make REG_DEAD notes for fixed regs. * combine.c (subst): Convert (not (ashift C X)) to (or (rotate ..)) and similarly for (not (lshiftrt C X)). (make_field_assignment): Make corresponding change in how we recognize bitfield assignment of single bit to zero. * combine.c (merge_outer_ops): New function. (simplify_shift_const): Use merge_outer_ops to generalize and simplify handling of outer_ops. Try using distributive law followed by invert distributive law to simplify combinations of logical operations and shifts. * emit-rtl.c (gen_highpart): Correct conditional that says when we can get the bits of a DFmode object; copy from gen_lowpart. * cse.c (simplify_binary_operation, case MULT): Simplify zero case. (simplify_binary_operation, case DIV): In 0/x, return zero in proper mode. * combine.c (simplify_comparison): Can only extend comparison to wider mode if equality comparison or test of sign bit. Tue May 14 03:26:36 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * cplus-tree.h (lang_type): Change to use TREE_VEC to hold basetype info. (CLASSTYPE_N_BASECLASSES, CLASSTYPE_BASECLASS): Changed accordingly. Baseclasses are now counted [0..n) instead of [1..n]. (CLASSTYPE_BASETYPECLASSES): Deleted. * cplus-*.c (various places): Change code to work with new representation for basetypes. * toplev.c (main): Handle `-gdwarf' as a debug option. * cse.c (insert): Treat pseudos marked RTX_UNCHANGING_P as being const. Mon May 13 22:44:18 1991 Jim Wilson (wilson at ok.cygnus.com) * mips.md: In the div/mod peepholes, don't apply the peephole if the first operation overwrites one of its two operands. Mon May 13 12:14:51 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * expmed.c (store_bit_field, extract_bit_field): Set volatile_p while checking predicates. * recog.h (volatile_p): Declare it. * explow.c (force_not_mem): Do nothing with BLKmode. * SYSCALLS.c (u_int): Don't define on DGUX--already defined. * m68k.md (zero_extend*): Don't make the subreg in the template. Make it explicitly, and handle subregs as operand 0. * tm-convex.h (MODES_TIEABLE_P): Fix typos. * loop.c (check_dbra_loop): To check for a loop with a `break', use loop_number_exit_label, not the uid_luid of each label, since loop unrolling may have created new labels with no uid_luid. * expr.c (push_block): Fixed typo in last change. Mon May 13 12:07:25 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * combine.c (subst): If we can't change comparison code, see if we can instead surround our operation with an XOR. * combine.c (make_compound_operation, simplify_and_const_int): Ensure shift counts are non-negative and in range before using them to perform shifts. (simplify_comparison): Likewise. * combine.c (try_combine): See if we have previously merged a compare and arithmetic operation. If so try to take it apart to allow further combines (such as making a branch-and-decrement). * combine.c (try_combine): Don't make VOIDmode register if our split point is a constant. * combine.c (subst): Use COMBINE_RTX_EQUAL_P to see if SET_DEST is our register; two hard regs might have different rtx. * combine.c (subst): Generalize associative law handling to cases not involving constants. * combine.c (expand_compound_operation): If we would return a (clobber (const_int 0)), return what we were given. * combine.c (simplify_shift_const): Clean up by removing fallthrough. Mon May 13 10:26:00 1991 James Van Artsdalen (james at bigtex.cactus.org) * i386.md (all calls to output_move_double): call return value to avoid spurious compiler warnings. Allow REG in all alternatives of operand 0 where possible. Remove patterns to recognize increment/decrement. (addsi3, addhi3, addqi3): Do this in here instead. (floatdidf2): New pattern. (adddi3, subdi3, negdi2): New patterns. (umulsi3, umulhi3): Remove obsolete UMULT patterns. (divM3, udivM3, divmodM4, udivmodM4): Use "r" constraint instead of "x" or "abc". (sqrtsf2, sqrtdf2): New patterns. (ashldi3, ashrdi3, lshldi3, lshrdi3): New patterns (All shift and rotate patterns): Don't use reg name explicitly in output string: use %N operand reference. (ashlM3, lshlM3): Use `add' instead of `shl'/`sal' if possible. (insv): Fix output constraint. Clarify source. Disable for now - makes worse code. (SImode bit test, all Scond patterns): Allow MEM operands too. (seq, sne): Handle CC_Z_IN_NOT_C. (jump, indirect_jump, tablejump): Align code on word boundary after unconditional jumps. (`loop' patterns): Delete - will never be useful on i386. (call_pop, call_value_pop): New patterns. (return): New pattern: Do `return' if simple epilogue. But only if the real function epilogue isn't next. (movstrsi): Do word moves, not just bytes, if count is unknown. (ffsM2): New patterns. * out-i386.c (FP_TOP, AT_SP, RET, RETCOM, POP_ONE_FP, FP_CALL1, FP_CALL): Move to tm-i386.h for use by i386.md. (output_movf, fp_call_internal, output_fix_trunc, split_di): No longer static - called from i386.md. (via_memory): Finish return value change. (output_move_const_double): Delete unused function. (simple_386_epilogue): New predicate. (function_prologue): Allocate frame regardless of whether or not there is a frame pointer. Use output_asm_insn instead of fprintf to push registers. (function_epilogue): Likewise. If there is a frame pointer, don't necessarily fix %esp just to pop a reg - use offset from frame pointer. Fix -fomit-frame-pointer support. Fix RETURN_POPS_ARGS case where args > 32K bytes. (print_operand): A LABEL_REF gets an OFFSET_PREFIX too. (print_operand_address): %esp can only be base reg, never index. (split_di): New function. * tm-i386.h: Remove references to obsolete tm-compaq.h file. (TARGET_486): New flag. (TARGET_SWITCHES): New options -m486, -mno486, -m386. (SMALL_REGISTER_CLASSES): New macro. (ASM_OUTPUT_LOOP_ALIGN): New macro. (all reg macros, ARG_POINTER_REGNUM): Create argument pointer, to be eliminated in favor of %esp or %ebp. (HARD_REGNO_NREGS, REGNO_REG_CLASS): Use FP_REGNO_P. (REGISTER_MOVE_COSTS): It is expensive to move between integer and float registers. (FP_REGNO_P): Detect only the FP regs. (all class macros): Delete obsolete classes ABC_REGS & ABCI_REGS. (REG_CLASS_FROM_LETTER): Add `S' for SIREG, remove `x' for ABCI_REGS. (CONST_OK_FOR_LETTER_P): Add `J' for DImode shifts. (FIRST_PARM_OFFSET): Offset now zero. (ELIMINABLE_REGS, CAN_ELIMINATE, INITIAL_ELIMINATION_OFFSET): Use generalized scheme to eliminate frame and arg pointers. (INITIAL_FRAME_POINTER_OFFSET): Delete. (REG_OK_FOR_BASE_P): allow virtual arg pointer. (FP_TOP, AT_SP, RET, RETCOM, POP_ONE_FP, FP_CALL1, FP_CALL): Moved here from out-i386.c for use by i386.md. * tm-compaq.h: Delete obsolete file. Sun May 12 18:38:41 1991 Ken Raeburn (raeburn at watch.com) * cplus-decl.c (print_binding_level, print_binding_stack, print_other_binding_stack): New debugging routines; dump one or more binding levels to stderr. * cplus-decl.c (push_to_top_level): New routine; saves copies of all class and local bindings, and some other state, and clears the real values, to effectively move to global scope. (pop_from_top_level): Restore the saved state. * cplus-decl.c (adjust_type_value): No longer static. Abort if current_binding_level is class binding level; need to investigate that situation further. * cplus-decl.c (finish_function): Check that the binding level being popped really is a function-parameter binding level. * cplus-tree.h (DESTRUCTOR_DECL_PREFIX): Replaces DESTRUCTOR_DECL_FORMAT; used as a prefix before the class name. * cplus-decl2.c (grokclassfn): Use it, and call build_overload_name rather than just copying the class name. * cplus-method.c (fndecl_as_string): Use TREE_TYPE rather than indirecting through type name and the identifier's associated type, since the latter may have changed. (build_nested_name): New argument, text_end; callers changed. Call build_overload_identifier rather than copying class name. (build_overload_value): Strip non-lvalue nodes for all arguments. Fixed up the handling of negative DImode values. (build_overload_identifier): New function. Copy class name (with length) if non-template, or build a name from template parameters. (build_overload_name): Call build_overload_identifier for class names. * cplus-parse.y: Added comment about use of $$ for $1. (template_type_name): Removed useless precedence specificiation. (template_arg_list): Wrap TREE_LIST nodes around all arguments in the list. (template_arg): Call groktypename on type names. For expressions, specify "UNARY" precedence. (PRE_PARSED_CLASS_DECL handling): Put a copy of the new class decl into global scope, to avoid recursive expansion, since we start in a non-global scope set up for the parameters. * cplus-pt.c (coerce_template_parms): New function. Converts template arguments to appropriate types, returns a vector containing results. (mangle_class_name_for_template): Removed nparms argument. Changed to deal with arglist as vector. No longer call groktypename. Some initial code added for PARM_DECL (non-type) parameters; work not completed. (lookup_template_class): Call coerce_template_parms. Removed some unused code. (push_template_decls, pop_template_decls): Fixed to deal with arglist as vector. More code for non-type parameters. (instantiate_template): Push to top binding level before pushing any declarations. (end_template_instantiation): Pop from top level, then push the new decl at top level. * cplus-tree.h (struct lang_identifier): Renamed field "template" to "class_template_info"; accessor macros changed. * cplus-pt.c (struct template_info): Renamed from "template". Removed unused fields. Sun May 12 17:38:46 1991 Jim Wilson (wilson at cygnus.com) * unroll.c (copy_loop_body): Fix typo: had `==' for `='. Sun May 12 17:05:07 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * genattrtab.c (gen_attr): Clear has_asm_insn field in new object. Sun May 12 04:21:52 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * hard-reg-set.h (HARD_CONST): New macro. Converts integer constants to appropriate type for use with HARD_REG_SET. ({SET,CLEAR,TEST}_HARD_REG_BIT): Use this macro where appropriate. (GO_IF_HARD_REG_SUBSET): Ditto. (HARD_REG_SET): Add new case if FIRST_PSEUDO_REGISTER <= HOST_BITS_PER_LONGLONG. * global-alloc.c: Pass HARD_CONST (0) instead of 0 to functions which are looking for a HARD_REG_SET argument. * reorg.c (resource_conflicts_p): Change comparison of HARD_REG_SET value to compare against HARD_CONST. * all xm-*.h files: Added HOST_BITS_PER_LONGLONG where HOST_BITS_PER_LONG was defined. * tm-sparc.h (REG_CLASS_CONTENTS): Fixed in case we're using long long HARD_REG_SETs. * toplev.c (main): support -gdwarf switch. * longlong.h (umulsidi3): SPARC .umul routine returns the value in WORD_LITTLE_ENDIAN form, so swap. Other word-endian changes for inline mul routines. * gnulib2.c (__divdi3): If C is nonzero, negate whole division instead of returning negation of quotient. Sat May 11 20:06:08 1991 Torbjorn Granlund (tege at krishna.sics.se) * expmed.c (outside of functions): New vars: lea_cost, lea_max_mul. (init_expmed): Initialize lea_cost and lea_max_mul. (synth_mult): Use them. Sat May 11 20:11:41 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * cplus-class.c (build_vbase_path): Rewritten and simplified. * cplus-cvt.c (build_up_reference): Try to get away without building a NOP_EXPR around the return value of `build_component_addr'. Ditto for return value from `convert_pointer_to'. * cplus-decl.c (void_zero_node): New node. Used in conditional expressions where one arm must do nothing. * various places: replace calls that built this node dynamically to just use the global copy. * cplus-tree.h (void_zero_node): Declare it globally. (maybe_build_cleanup): Don't call `convert_force' on the return value of `build_unary_op'. We should have license to modify its type without harm. * cplus-gc.c (protect_value_from_gc): Same idea for VAR_DECL and PARM_DECL nodes. * toplev.c (f_options): Add choice for -fPIC. * varasm.c (assemble_function): If it's a function name that's the first global name, strip of a leading '*' if there is one. * reload.c (find_reloads): Fix comment. * stmt.c (expand_return): Call `any_pending_cleanups' with argument. * expr.c (expand_expr): In TARGET_EXPR case, If TARGET is null and DECL already has rtl, use that as the target. (expand_expr): In BIND_EXPR try using expand_{start,end}_bindings to catch cleanups...otherwise fixup_cleanups must be modified to deal with cleanups not in any contours. Sat May 11 15:09:42 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * out-i386.c (via_memory): Return a memref to the stack. (fp_call_internal): Change call to via_memory. * expr.c (push_block): New arg BELOW specifies padding direction. All callers changed. (emit_push_insn): Pass an interesting value for BELOW. * c-parse.y (typespec): Pass the TYPE_DECL for a typedef name. * c-decl.c (grokdeclarator): Handle TYPE_DECL in declspecs. Thu May 9 15:17:44 1991 Tom Wood (wood at dg-rtp.dg.com) * m88k.md (zero_extend pattern): Compute correct constant. Thu May 9 07:44:20 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * combine.c (subst): Remove WAS_REPLACED; always check the rtl for specific cases of interest and don't use TO and FROM when looking into the rtl. * combine.c (subst, case MEM): Call make_compound_operation here so any ASHIFTs will be MULTs for mode_dependant_address_p calls later. (subst, case PLUS): Remove cases already done elsewhere. * expmed.c (emit_store_flag): Don't let the delete_insns_since call we do kill insns to do an auto-inc. * flow.c (propagate_block): Don't treat global regs as clobbered over a CALL_INSN even if call-clobbered. * stmt.c (expand_end_stmt_expr): Correctly handle the case where an expression statement is just an auto-inc of a var. * sparc.md (fix_trunc[sd]fsi2): Finish change to use MATCH_SCRATCH by eliminating DEFINE_EXPAND and making DEFINE_INSN a named pattern. Wed May 8 13:31:23 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * cccp.c (rescan): Handle symbols before // as before /*. * Makefile.in (objc-parse.o): Specify the command. * c-parse.y (typespec): Fix previous change. * reload1.c (choose_reload_regs): Use spillregs in round robin. Wed May 8 11:00:29 1991 Michael Tiemann (tiemann at cygnus.com) * cplus-lex.c (tree_node_kinds): Renamed to `tree_node_counts'. Wed May 8 05:50:29 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * integrate.c (copy_rtx_and_substitute): Don't round frame size. * loop.c: Must include insn-flags.h to get HAVE_decrement_and_branch_until_zero. * Makefile.in (loop.o): Likewise. * expmed.c (expand_divmod): Use LOG instead of INTVAL (OP1) once we start generating rtl. Wed May 8 05:38:06 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * cplus-decl.c (duplicate_decls): Don't crash on duplicate TEMPLATE_DECLs. (globalize_nested_type): Handle globalizing types when CLASS_BINDING_LEVEL goes out of effect. (init_decl_processing): Comment out decls for ABS, FABS and LABS. They conflict with libg++ inlines. * cplus-decl2.c (build_push_scope): Fix bug in last change. (finish_file): Make the dummy decl that we tack on to the global scope a TYPE_DECL instead of a VAR_DECL. Fake global VAR_DECLs are problematic on some machines (i.e. MIPS). * cplus-init.c (init_vfields): Use TREE_TYPE (VFIELDS) to find the type for which the VFIELD was last distinguished. This picks up cases where single inheritance overrides base class vtables and the base class does not get a new vtable for the override. * cplus-parse.y (named_class_head_sans_basetype): Handle a `template_type_name' by itself. This happens with e.g. friend class Stack. * cplus-pt.c (mangle_class_name_for_template): Put ',' between parameters. (push_template_decls): Don't crash if ARGLIST is ERROR_MARK_NODE. * cplus-class.c (finish_base_struct): Compute MAX_HAS_VIRTUAL by looking at all the base classes relevant to VFIELDS. (build_vbase_path): Initialize NONNULL to zero. Tue May 7 23:47:42 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * stmt.c (any_pending_cleanups): Don't fail if block_stack is empty. Tue May 7 22:46:16 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * cse.c (simplify_binary_operation; case EQ, NE): Don't assume the address of a symbol is non-zero. * sched.c (schedule_insns): Ensure we free memory used by schedule_block when using the C alloca. Tue May 7 14:13:57 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * reload1.c (mark_reload_reg_in_use): New arg MODE. Mark all the regs. (choose_reload_regs): Pass that arg; don't loop here. * c-parse.y (typespec): Convert a TYPENAME to its meaning. * fold-const.c (fold): Don't assume symbolic constant is nonzero. * c-typeck.c (c_expand_asm_operands): Convert arrays, fcns to pointers. Mon May 6 23:29:21 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * cse.c (cse_insn): Only make a REG_WAS_0 note if the previous set was to the same register, not just the same quantity; if previous REG_WAS_0 note, update back pointer. If setting a register to a constant, update QTY_CONST and QTY_CONST_INSN so it points to the last set. In special case for (set REG0 REG1), ensure any REG_WAS_0 notes are updated correctly. * genrecog.c (make_insn_sequence): Don't clobber `i' when it is still needed. * out-vax.c (print_operand_address): Fix bug in last change in handling (plus (reg) (reg)). Mon May 6 16:41:50 1991 Torbjorn Granlund (tege at zevs.sics.se) * expmed.c (synth_mult): Make it handle t == 0. Improve comments. Use (max_cost <= add_cost) instead of (max_cost < add_cost) to determine if we should fail early (to better prune the search). Remove loop with n from factor synthesis. Remove -2 bias from m loop (for clearity). Add code to use load-effective-address instructions. Use bit-fiddling instead of loop to determine q in the last synthesis case. Mon May 6 11:21:45 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * c-typeck.c (convert_for_assignment): Reword an error message. * c-typeck.c (build_conditional_expr): Typo in last change. * Makefile.in (enquire, enquire.o): Depend on gnulib. Sun May 5 17:28:22 1991 (Eric Youngdale at youngdale@v6550c.nrl.navy.mil) * make-cc1.com: Update for GCC 2.0; build insn-attr.h, insn-attrtab.c. Compile and add obj to linker list: c-aux-info.c, c-common.c, c-lang.c, aux-output.c, calls.c, dwarfout.c, function.c, reorg.c, sched.c, sdbout.c, unroll.c, insn-attrtab.c. Remove references to symout.c. Sun May 5 15:32:01 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * Makefile.in (rest.encap): Make gnulib before float.h. * c-typeck.c (build_conditional_expr): Don't assume symbolic constant is nonzero. * reload1.c (choose_reload_regs): Ignore avoid_return_reg. (reload_as_needed, reload): Don't bother setting avoid_return_reg. Sun May 5 14:30:14 1991 Michael Tiemann (tiemann at cygint.cygnus.com) * cplus-class.c (prev_class_type): Declare this to be static. (build_vbase_path): Test NONNULL to decide whether a COND_EXPR is actually needed. (finish_struct): Another sort of hard virtual function to deal with is one which comes from the non-leftmost baseclass, and who's index is different between that class and the main derived class. Use new variable DOING_HARD_VIRTUALS to control when we punt and when we plow through. (modify_vtable_entry): If we find at this point that we have a hard virtual function, just put it on the list PENDING_HARD_VIRTUALS if DOING_HARD_VIRTUALS is nonzero. (fixed_type_p): Handle SAVE_EXPR, RTL_EXPR, PLUS_EXPR, MINUS_EXPR, NOP_EXPR and CONVERT_EXPR. (pushclass): Fixed comment. Also change test for whether this is the top-level class scope from an obscure one to an obvious one, and add comment. (pushclass,popclass): Now always allocate a binding level. Later we'll have to rewrite this to actually use it. * cplus-gc.c (type_needs_gc_entry): Don't need a GC entry for ERROR_MARK_NODE. * cplus-init.c (build_new): Set TREE_CALLS_NEW on RTL_EXPR. This gives us a case that `fixed_type_p' can grok. * cplus-lex.c (identifier_type): Make this __inline if compiling with GNU C. (tree_node_kinds): Renamed to `tree_node_counts'. * cplus-parse.y (various places): Take advantage of default rule `$$ = $1', and where possible, use $$ instead of $1. Also, back out change for setting `looking_for_typename' to 1 at top level. * cplus-decl2.c (build_push_scope): If the user gives X::foo in X's scope, don't return a SCOPE_REF. Just return `foo' instead. * cplus-decl.c (init_decl_processing): Don't define `alloca' as a built-in function until libg++ header files agree with its built-in type. (finish_decl): Don't crash if TYPE is error_mark_node. * fold-const.c (split_tree): When splitting the tree, don't call convert if the TYPE_MODEs are the smae. This screws up C++ where conversion of one pointer type to another can cause the pointer's value to change. * tree.c (get_identifier): Speed up `get_identifier' by about a factor of 2. This becomes noticable with the long names used for C++ overloading. (tree_cons): Make this most frequent user of `make_node' perform its actions inline. * calls.c (expand_call): Eliminate many (most) calls to strcmp by being smarter about when to call it. Also, don't call `push_block' in the trivial case when it's not needed. Sun May 5 08:51:14 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * expr.c (convert_to_mode): Fix (for the second time) test for when gen_lowpart should be called. * cse.c (find_best_addr): Try to fold address. (fold_rtx): Do associativity and (not (not ...)) checks here. (cse_insn): Not here. * combine.c (recog_for_combine): New parameter, PNOTES. When we add a CLOBBER, put a REG_UNUSED note for it in *PNOTES. (try_combine): Call recog_for_combine with new parameter. Delete any now-invalid REG_UNUSED notes in OTHER_INSN and add any required new ones. Add REG_NOTES to I3 and I2 due to added CLOBBERs. (remove_death): Call new function, remove_note. (move_deaths): Don't get confused by a CLOBBER. (distribute_notes): Don't make duplicate REG_UNUSED notes. Don't put a REG_DEAD note on an insn when the register is partially modified, but remains valid. * rtlanal.c (remove_note): New function. * combine.c (try_combine): When making a PARALLEL that does a compare and arithmetic, don't simplify the COMPARE. * combine.c (try_combine): Validate that I1DEST isn't being modified invalidly. * combine.c (simplify_comparison): In ZERO_EXTRACT case, add missing test for equality comparison against zero; also invert comparison condition. If we can't do a comparison in a narrower mode, but we know that some wider bits are zero, see if we can do it in a wider more. * cse.c (simplify_binary_operation): Remove obsolete code to convert negative shift counts to the opposite shift. Don't fold invalid shifts since they may trap (e.g., on Vax). * reload1.c (emit_reload_insns): Use rtx_equal_p to see if a result is already in the desired register. * combine.c (find_split_point): Add two more ways to split an insn. * combine.c (gen_binary): Put a complex operand first in addition to putting constants second, just like subst would do. * combine.c (significant_bits): Correct computation of significant bits for division operations. * combine.c (apply_distributive_law): Reject complex SUBREGs. SUBREG distributes over logical and addition operations. * combine.c (subst; case AND, IOR, XOR): Add some boolean arithmetic simplifications. * expr.c (do_jump): ADDRESS_EXPR is not always zero, unfortunately. * expr.c (do_store_flag): In case where we are testing a single bit, don't convert to output mode until after we do the shift. * optabs.c (expand_binop, expand_unop, expand_fix): Compare enum insn_code objects against CODE_FOR_nothing instead of 0. * romp.md (bit_insv): Use CC0 in standard way; i.e., in NE. Sat May 4 20:41:12 1991 (Eric Youngdale at youngdale@v6550c.nrl.navy.mil) * c-aux-info.c (gen_aux_info_record): Use getcwd on VMS a la USG. * dbxout.c: Same here. * xm-vms.h: Define unlink as remove (GCC_INCLUDE_DIR): Provide a dummy definition. Sat May 4 16:46:48 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * combine.c (can_combine_p, try_combine): Use SMALL_REGISTER_CLASSES to indicate when it is valid to do combines involving hard registers. * cse.c (canon_hash): #ifdef SMALL_REGISTER_CLASSES, don't record hard registers unless they are fp, ap, sp or are fixed. * loop.c (valid_initial_value_p): #ifdef SMALL_REGISTER_CLASSES, hard register aren't valid initial values. * reload1.c (reload): Initialize FORBIDDEN_REGS depending on whether we have small register classes or not. * ns32k.md: Replace const_int with const_int_operand. Remove HImode extractions. Remove patterns assigning an AND to CC0. (andcbxx3): Remove name and eliminate case with NOT as second operand. (sbitx, cbitx): Remove patterns involving IOR and ASHIFT; add patterns with ZERO_EXTRACT as destination. (ibitx): Put ASHIFT as first operand in XOR. (bitfield compare): Remove comparison of 1 bit field with 1; combine converts this to comparison with zero. (and-compare-branch): Fold PLUS or MINUS into constant, like combine will do. Remove patterns for reversed cases. * out-ns32k.c (const_int): Deleted. * rtlanal.c (reg_used_between_p, reg_set_between_p): Use GET_RTX_CLASS. (reg_set_p_1): If we are setting a MEM, don't think we are setting registers used in its address. * m68k.md (cmpsf, cmpdf, tstsf, tstdf for FPA): Use MATCH_SCRATCH. * sparc.md (memory store patterns): Likewise. * function.c (assign_parms): Function is varargs function if the last parameter is `__builtin_va_alist_' instead of checking the first parameter. Normally, this is the same, but some functions in MACH have named parameters before va_alist. * combine.c (simplify_comparison): Remove abort on paradoxical SUBREGs now that we know they can occur. * reload.c (decompose): Handle SCRATCH; it can't conflict with anything. (find_reloads): All operands can set earlyclobber, not just REG & MEM. Add support for "X" constraint. SCRATCH does not match "g" constraint. Sat May 4 14:03:16 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * enquire.c (EPROP): Avoid a <= out if bad is set. * SYSCALLS.c: Test bsd4_2 along with BSD. Fri May 3 14:26:51 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * c-decl.c (pushdecl): Stop looping on type if find error mark. * loop.c (invariant_p): An address with a PLUS is not the same as MEM_IN_STRUCT_P being set. * tree.h (TREE_NO_UNUSED_WARNING): New macro. * stmt.c (warn_if_unused_value): That flag suppresses warnings. * c-typeck.c (build_unary_op): Set flag when converting postinc. Fri May 3 08:09:47 1991 Tom Wood (wood at dg-rtp.dg.com) * tm-m88k.h (GO_IF_LEGITIMATE_ADDRESS): Remove workarounds for register elimination problems. Fri May 3 07:14:22 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * a29k.md: Fix typo in dmac pattern. Make many define_splits that convert DFmode and DImode to one word at a time to operate only after reload completes to improve reg alloc. (movdf): Correct typo in mfacc. (rotlsi3): Count is QImode, not SImode. * tm-a29kunix.h (BIGGEST_ALIGNMENT): Change to 64. * tm-romp.h (OPTIMIZATION_OPTIONS): Enable insn scheduling. (register definitions): No longer need dummy register and class; register numbers for FP register change. * romp.md: Use MATCH_SCRATCH instead of allocating pseudos to the dummy register class or base register depending on alternative. (FP insns): Add missing "=" to constraints in CLOBBERs. (extendqisi2, extendqihi2): Now DEFINE_EXPAND. (mc03 peephole): Can do if right shift >= 24 bits. * out-romp.c (reg_15_operand): Remove special case for FP delay slot. (romp_sa_size, output_fpop, output_loadsave_fpops, output_fpops): Change floating-point register numbers. * combine.c (simplify_shift_const, case for shifts): Verify that the host word size is wide enough. Properly handle (ashift (subreg (ashiftrt ...) ...) ...). * out-vax.c (print_operand_address, case PLUS): Handle all addresses accepted by GO_IF_LEGITIMATE_ADDRESS. * explow.c (plus_constant): force_const_mem does not necessarily return a valid address. * integrate.c (copy_rtx_and_substitute): Likewise. * Makefile.in (local-alloc.o): Includes output.h. * rtl.def (SCRATCH, MATCH_SCRATCH): New RTL codes. * regs.h (max_scratch): Add definition. * genconfig.c (walk_insn_part): Handle MATCH_SCRATCH. * genextract.c (walk_rtx): Likewise. * genemit.c (max_operand_1): Likewise. (gen_exp): Emit a SCRATCH for for MATCH_SCRATCH. (gen_insn): We can create (clobber (scratch)). * genoutput.c (scan_operands): Handle MATCH_SCRATCH; use switch instead of if's. * genrecog.c (make_insn_sequence): We can created (clobber (scratch)). (add_to_sequence): Handle MATCH_SCRATCH. * flow.c (life_analysis): Initialize max_scratch. (propagate_block): Update max_scratch with count from this block. (mark_set_1): Make REG_UNUSED note for SCRATCH and count it. * local-alloc.c: Include output.h. (qty_scratch_rtx): New variable. (alloc_qty): Rename INSN_NUMBER to BIRTH since that's what it is. (alloc_qty_for_scratch): New function. (local_alloc): Account for quantities needed for SCRATCH. Allocate and initialize qty_scratch_rtx. (block_alloc): Allocate quantities for SCRATCH operands. (requires_inout_p): Add "X" constraint. * recog.c (scratch_operand): New function. (constrain_operands): SCRATCH matches a register constraint unless strict. Add "X" constraint. * regclass.c (reg_class_record): Add "X" constraint. * reload1.c (emit_reload_insns): Add SCRATCH to test for operand that dies right away; update REG_UNUSED note for SCRATCH. Never need reload insn for SCRATCH, even if no REG_UNUSED note. * rtlanal.c (reg_mentioned_p, reg_overlap_mentioned_p, rtx_equal_p): Support SCRATCH. (volatile_refs_p, side_effects_p, may_trap_p): Likewise. (inequality_comparisons_p, replace_regs): Likewise. * flow.c (mark_set_1): Don't do anything special with partial assignments; this is already handled by mark_used_regs and we now want to make LOG_LINKS for these. * combine.c: Includes expr.h. (expand_field_assignment, make_extraction): New functions. (get_pos_from_mask, make_field_assignment): Likewise. (can_combine_p): Remove special case for SUBREG in SET_DEST; call expand_field_assignment instead. (try_combine): Remove code to handle STRICT_LOW_PART here. Call expand_field_assignment on SETs in I3. (find_split_point): Split up simple cases of bitfield assignments. (subst, case ZERO_EXTRACT): Remove processing of ZERO_EXTRACT in a SET_DEST from here. (subst, case SET): Try to convert this into a field assignment by calling make_field_assignment. No need to call make_compound_operation for COMPAREs; make_compound_operation now returns an rtx and is no longer passed a pointer. Remove tests for ZERO_EXTRACT in SET_DEST. (make_compound_operation): Now returns rtx and is passed rtx, instead of rtx *. Call make_extraction. (simplify_comparison): Call make_compound_operation here and remove any outermost SUBREGs that aren't doing anything. * Makefile.in (combine.o): Includes expr.h. * expr.c (convert_to_mode): Correct which cases can use gen_lowpart. * final.c (final_scan_insn): Don't set INSN_DELETED_P after writing insn. * genoutput.c (main): Don't include aux-output.c in insn-output.c. Include stdio.h before output.h. (output_epilogue): Write definitions for all the predicates placed in `insn_operand_predicate'. * output.h: No longer need to define operand-predicate functions. * configure: (m88k/dg): Only difference between xm-m88k{,dgux}.h was definition of SEPARATE_AUX_OUTPUT, so we don't need xm-m88kdgux.h. * xm-m88kdgux.h: Deleted. Fix typo setting `target' in Makefile. * Makefile.in (AUX_OUTPUT2): Deleted. (OBJS): Remove AUX_OUTPUT2 and add aux-output.o. (aux-output2.o): Now aux-output.o. (insn-output.o): No longer depends on aux-output.c. * make-m88kdgux (AUX_OUTPUT2): No longer define. * tm-m68k.h, tm-romp.h, tm-sparc.h: Define functions in out-*.c and used by insn-output.c. * tm-m88k.h: Remove conditionalization for SEPARATE_AUX_OUTPUT; now always done. No longer define predicate functions; done by genoutput.c. * tm-mips.h: No longer define SEPARATE_AUX_OUTPUT. * out-*.c: Add includes previously present in insn-output.c. * out-sparc.c (output_fp_move_double): No longer static. (output_sized_memop): No longer need to define asm_out_file here. (output_function_epilogue): Correct type; function is void, not char *. Fri May 3 01:05:44 1991 Micheal Tiemann (tiemann at pogo.gnu.ai.mit.edu) * sdbout.c (sdbout_one_type): TYPE_FIELDs may contain other kinds of _DECL nodes than just FIELD_DECL nodes (in GNU C++, at least). Don't look through such nodes until further mods are made to handle them better. Thu May 2 14:43:48 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * c-decl.c (finish_enum): Don't store enum type as type of value. * c-parse.y (YYPRINT, yyprint): New macro and new function. * expmed.c (expand_and): Handle both args constant. * expr.c (store_field): Avoid refetching from bitfield if possible. * math-68881.h (pow): Negate x if negative when taking log. * expr.c (emit_move_insn): Fixed typo in `y1 = change_address' call. Reenable the code to move objects word at a time. Thu May 2 12:29:16 1991 Eric Youngdale (youngdale at v6550c.nrl.navy.mil) * cccp.c (hack_vms_include_specification): Modified conversion of unix filenames to VMS filenames, if no VMS device or directory is present, and a unix style directory name is present, then use the first unix directory name as the VMS device spec. This is only used in '#include <...>' type includes, when the include file has not been found in the standard locations. Thu May 2 10:06:47 1991 Micheal Tiemann (tiemann at pogo.gnu.ai.mit.edu) * cplus-decl.c (init_decl_processing): Call init_gc_processing if -fgc is requested. * cplus-init.c (build_new): Argument to build_compound_expr must be a TREE_LIST all the way. The last elt of the chain cannot be an _EXPR. Thu May 2 07:33:50 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * expr.c (expand_expr, case CONVERT_EXPR): Pass bitsize to store_field instead of size in bytes. Wed May 1 13:33:58 1991 Micheal Tiemann (tiemann at pogo.gnu.ai.mit.edu) * version.c: Bumped version number to 1.93. Wed May 1 12:26:36 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * gcc.c (link_command_spec): Pass plain -m to ld. * c-decl.c (finish_enum): Clean up re-laying out of type. Wed May 1 08:04:44 1991 Michael Tiemann (tiemann at cygnus.com) * Makefile.in: Handle new cplus-*.c files. * cplus-typeck.c (common_base_type): Make this function recursive. (build_component_ref): Test whether or not a FIELD_DECL, not whether or not a VAR_DECL||CONST_DECL||TYPE_DECL. * cplus-parse.y: Fixed grammar so that template type decls could be used. Previously, support existed for template decls following types, but not as types. * cplus-pt.c ({push,pop}_template_decls): New functions. (instantiate_template): Call `push_template_decls'. (end_template_instantiation): Let `poplevel' restore old bindings. No need to clear out extra stuff. (pushclass, popclass): Call `{push,pop}_template_decls' if the class we are pushing or popping has template arguments. These arguments go at class level. * cplus-method.c (build_opfncall): Test TRY_SECOND before testing possibly uninitialized XARG2. * cplus-lex.c (init_lex): Initialize NODE_TABLE, OPNAME_TAB and ASSIGNOP_TAB to hold zero. Since these come from malloc'd memory, we cannot trust them to be initialized on startup. * cplus-init.c (expand_aggr_init_1): When initializing through a TARGET_EXPR for objects of the same type (e.g., X a = X (10);) use EXP's DECL_RTL as the DECL_RTL of the TARGET_EXPR. * cplus-decl2.c (finish_file): Handle new flag `-fgnu-binutils'. When zero, don't use GNU extensions to a.out format. ???Should be merged into varasm.c. * cplus-class.c: Added support for `dossiers'. This support is implemented by extending the virtual function table and by giving all C++ objects a virtual function table to hold it's dossier. * cplus-decl.c (record_builtin_type): New function to construct dossier information for built-in types. (output_builtin_tdesc_entries): To keep repeated information under control, we only output this information for the file that contains `main'. (init_decl_processing): Many dossier-related changes. (init_lex): Recognize new reserved words `headof' and `classof' if -fgc. * cplus-parse.y: Grammar now recognizes `headof' and `classof' expressions. * cplus-method.c: Added dossier constructors here. * cplus-tree.h (CLASSTYPE_DOSSIER): New macro: `dossier' is a new field in lang_type. * cplus-typeck.c (convert_for_assignment): Handle `class_star_type_node'. * cplus-class.c: New variable current_class_depth. Used to tell what class nesting level the compiler is at. * cplus-decl.c (grokdeclarator): Now supports references to decls that come from nested types. For example, int foo::bar (foo_tag); where `foo_tag' is a tag that comes from foo. Previously this was supported only as int foo::bar (foo::foo_tag); * cplus-decl2.c (build_push_scope): build a SCOPE_REF node while pushing into the context for the scope. When `grokdeclarator' sees one of these nodes (distinuished by its TREE_COMPLEXITY being set to the current_class_depth), it processes the decl and pops the scope. * cplus-class.c (build_vbase_path): Trust objects that are `fixed_type_p'. Also, don't assume an object is non-null unless flag says this is explicitly so. InterViews creates and may manipulate (via delete) lots of null objects. (build_vfn_reference): Use IS_AGGR_TYPE test on type, not in INSTANCE. (resolves_to_fixed_type_p): New argument NONNULL is used in case we know and object to be non-zero. All callers changed. * cplus-call.c: New file, from file cplus-class.c. Contains code to generate method calls. * cplus-class.h: New file, contains common declarations for cplus-class.c and cplus-call.c. * cplus-class.c (finish_struct_bits): Don't leave last_conversions uninitialized. Tue Apr 30 17:14:00 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * expr.c (expand_expr): Preserve volatility when changing ARRAY_REF to use a pointer. * vax.md (indirect_jump): Use parens around register, not @. * fixincludes (machine/cpu.h): Delete superfluous `static'. * tm-decstatn.h (CPP_PREDEFINES): Define __mips and __LANGUAGE_C. * explow.c (allocate_dynamic_stack_space): Compensate if STACK_POINTER_OFFSET throws off the alignment. * loop.c (strength_reduce): Typos setting not_every_iteration. Tue Apr 30 16:10:32 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * vax.md (bicb): Fix typo that caused operand not to be negated. (jlbs/jlbc): Operand[0] cannot be a constant. * rtl.h: Put NOTE_INSN_... codes in order. (find_regno_note): Add missing definition. * reload.c (find_reloads_address): Handle an indexed stack slot that is made out of range by frame pointer elimination. Tue Apr 30 14:09:28 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * toplev.c (compile_file): Output gcc2_compiled, not gcc_compiled. * tm-tower-as.h (ASM_IDENTIFY_GCC): Likewise. Tue Apr 30 13:56:40 1991 Tom Wood (wood at dg-rtp.dg.com) * varasm.c (output_addressed_constants): Return and indication of whether the variable requires link-time relocations. (assemble_variable, get_or_assign_label): Use this value when choosing the section. Use the data section for variables and constants that are otherwise read-only when -fpic is given and when link-time relocations are required. * tm-*.h (SELECT_SECTION): Accept a new second parameter RELOC. Tue Apr 30 10:24:36 1991 Tom Wood (wood at dg-rtp.dg.com) * rtl.h (NOTE_INSN_LOOP_VTOP), rtl.c (note_insn_name): Add a new note indicating the virtual top of a loop. * jump.c (duplicate_loop_exit_test): Mark the duplicated exit code in the loop as the virtual top of the converted loop. (squeeze_notes): Move loop-vtop notes as well. * loop.c (scan_loop): When a loop-vtop note is encountered, reset `maybe_never' and `call_passed'. (strength_reduce): Similarly, reset `not_every_iteration'. Tue Apr 30 08:15:50 1991 Michael Meissner (meissner at osf.org) * expr.c (do_store_flag): Move the join label after setting the target value to 0, rather than before, which generates code that always stores 0 into the target if the machine does not have a builtin scc operation. Tue Apr 30 06:26:36 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * reload1.c (reload): When making reg_equiv_mem and reg_equiv_address from reg_equiv_memory_loc, clear the one we aren't setting; it might have been previously set. * final.c (final_scan_insn): Correctly handle when the first insn in a SEQUENCE is a JUMP_INSN that forces restoration of a comparison previously thought unnecessary. * fold-const.c (fold, case PLUS_EXPR): If we have 2 * real_cst, fold into a new constant instead of making real_cst + real_cst. Mon Apr 29 23:09:17 1991 Ken Raeburn (raeburn at watch.com) * cplus-decl.c (output_builtin_tdesc_entries): Corrected declaration of permanent_obstack. (init_decl_processing): Record declaration of int with name "int" rather than null. (finish_decl): Fix typo in comment. * cplus-class.c (finish_struct): Made error message for union member requiring constructor/destructor a little tidier. (resolve_scope_to_name): Look at fields of current type as well as tags, in case of local typedefs. (build_method_call): Permit explicit call of destructor in class that doesn't have one. (That's what the ARM says....) * cplus-decl.c (set_nested_typename): New function, extracted from within pushtag. Extended to deal with null classname. (pushtag): Call it. (pushdecl): For a TYPE_DECL, ensure that the nested typename gets set. (pushdecl_class_level): Ditto. (constructor_name): Test various assertions. (hack_incomplete_structures): If type is a class template, punt. * cplus-input.c (getch): Renamed from get_character. Callers changed. cplus-lex.c (old getch): Deleted. * cplus-lex.c (save_pending_input, restore_pending_input): New functions for saving and restoring lexer state. (process_next_inline): Restore lexer state after each function. cplus-pt.c (end_template_instantiation): Ditto. cplus-input.c (struct input_source, getch, feed_input): Preserve putback_char and lexer state. * cplus-input.c (getch): Return magic cookie on end of saved input for lexer to recognize. cplus-lex.c (yylex): Turn it into END_OF_SAVED_INPUT. (process_next_inline): Require it after inline function body. * cplus-lex.c (do_pending_inlines): Don't save away current file/line-no info; character input processing should do that. (yyungetc): Turn conditional abort into assertion test. (note_list_got_semicolon): Since variable "type" is available, use it rather than recompute. (identifier_type): Now static. (yylex): Warn about conflicts with class template expansion names. * cplus-parse.y (temporary_scope): New variable. (object and scoped_id actions): Set it to current type. (many other actions): Clear it. (scoped_typename): Now derivable also from scoped_id and TYPENAME. cplus-lex.c (yylex): If temporary_scope is set, use it to determine type of current token being examined, instead of looking always in the global scope. (Can't properly do nested template classes otherwise.) * cplus-ptree.c (print_lang_decl): Print out template-info, original-name, decl-main-variant, and pending-inline-info nodes if not null. * cplus-pt.c (mangle_class_name_for_template): For negative numbers, use "m" prefix rather than printf's "-". (overload_template_name): Test more assertions. Use SET_IDENTIFIER_TYPE_VALUE macro. (lookup_template_class): Assert template decl node is non-null. Push to permanent obstacks for new allocations. (instantiate_template): Return new class type in a list. * cplus-pt.c (undo_template_name_overload): Clear type local definition of template name. (end_template_instantiation): Call it. cplus-parse.y (structsp actions): Ditto. (named_class_head_sans_basetype): Don't call overload_template_name here. (named_class_head): Call xref_tag, to define a tag, before calling it here. * cplus-parse.y (tmpl.1, tmpl.2): Delete type declarations, since they have no values. (yyprint, YYPRINT): New function and macro to work with debugging code added to bison. (datadef -> template_header... actions): Assign yychar, rather than calling yyungetc and yylex. Require trailing semicolon. (fn.def1 -> PRE_PARSED_FUNCTION_DECL action): Preserve all of terminal value, instead of just TREE_PURPOSE. (tmpl.1 action): Do instantiation only if '{' or ':' not found. (template_instantiation): Call overload_template_name right away. (primary -> .scope new '(' typename ')' '[' ...): Detect and warn about this construct, which appears to be recognizeable, though disallowed by the ARM. (primary -> delete[]): Return error_mark_node. (primary -> obj TYPESPEC::~TYPESPEC()): Catch, parse as valid. Returned value not determined yet. (typespec): No longer derived from PTYPENAME. (LC): Added missing semicolon at end of rule. (stmt): A PTYPENAME can also be used as a label name. Mon Apr 29 22:18:47 1991 James Van Artsdalen (james at bigtex.cactus.org) * tm-att386.h (ASM_OUTPUT_LOCAL): Align static local variables. Mon Apr 29 15:20:35 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * fold-const.c (fold): Don't assume an address is nonzero. * cse.c (fold_rtx): Likewise. * stmt.c (warn_if_unused_value): No warning for cast of cast of modify. * Makefile.in (USER_H): Remove float.h. Mon Apr 29 13:46:48 1991 Jim Wilson (wilson at cygnus.com) * loop.c (scan_loop): When see a REG_EQUAL note, check for both the move_insn and the REG_RETVAL case, since they can occur together. (move_movables): For the move_insn case, handle library calls just like the older normal case code below, that is, skip to the end of a library call when when see a REG_LIBCALL note, and delete an entire library call if when see a REG_RETVAL note. Mon Apr 29 12:58:19 1991 Jim Wilson (wilson at cygnus.com) * sched.c: (schedule_block): Rewrite code that computes which registers are live at the end of the block. Compute this from basic_block_live_at_start info of current block, instead of from all reachable blocks. Previous code failed if one of the reachable blocks consisted of dead code. (sched_note_set): Set bb_live_regs when DEATH is false. * sched.c: Update copyright. Correct various problems with indentation and white space. (canon_rtx): Delete obsolete code handling INSN_LIST rtx. Add code to recurse on the operands of a PLUS rtx. (find_symbolic_term): New function. Recursively search an rtx for a SYMBOL_REF or a LABEL_REF and return pointer to one if found. (memrefs_conflict_p): No longer needs to call canon_rtx on operands of a plus. Now handles case of two addresses with different base addresses. (schedule_block): Don't set INSN_DELETED_P bit of ignored notes. Verify that REG_DEAD notes have a register value. (sched_analyze_1): Ifdef out obsolete code which calculates cc0 dependencies. (sched_analyze): Likewise. (schedule_block): Likewise. (launch_links): Delete obsolete code for handling SPARC 'orcc' insns. Mon Apr 29 12:09:32 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) * configure: Allow spaces between options and their args. Mon Apr 29 06:35:09 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * jump.c (jump_optimize): Don't emit jump to next insn; this would cause jump_optimize to loop. (jump_optimize, duplicate_loop_end_test, do_cross_jump): Never put insn in jump_chain if its INSN_UID is too large. (redirect_tablejump): Likewise. Sun Apr 28 08:00:01 1991 Michael Tiemann (tiemann at cygnus.com) * cplus-decl.c (init_decl_processing): Merge changes in builtin function handling to match the way that c-decl.c now works. Also add global variables to support that change. (define_function): Ditto. * cplus-decl2.c: Add flags for gc and xref. * cplus-tree.h (DECL_GC_OFFEST): New macro for gc. * cplus-tree.h: Rearrange CLASSTYPE_ASSOC and CLASSTYPE_BASETYPES so that the former now uses TYPE_LANG_SPECIFIC storage, and the latter uses TYPE_BASETYPES. * cplus-tree.h: Change overload names of new and delete to `nw' and `dl'. Formerly, `new' was being seen as `ne', the encoding for `not equal'. * cplus-xref.c: New file. Adds support for generating cross-reference information such as a class browser or program analyzer would use. * cplus-gc.c: New file. Add support for garbage collection. * cplus-decl.c (finish_decl): Tie decls to their places in the garbage collector. * cplus-init.c (build_new): Added hooks for gc. * cplus-typeck.c (convert_arguments): protect arguments from the garbage collector if -fgc. (build_modify_expr): More gc-related changes. Fri Apr 26 07:31:26 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * integrate.c (expand_inline_function): Add missing increment of I. Thu Apr 25 11:07:11 1991 Tom Wood (wood at dg-rtp.dg.com) * m88k.md (various patterns): Use nonimmediate_operand in place of reg_or_nonsymb_mem_operand and constraint `m' in place of `Q'. * tm-m88k.h (EXTRA_CONSTRAINT): Only needed for a call address. * out-m88k.c: reg_or_nonsymb_mem_operand and symbolic_memory_p are now unused. * m88k.md (symbolic store patterns): These patterns are all unnecessary and are deleted. * out-m88k.c (emit_move_sequence): Eliminate the case that generated a CLOBBER. This was intended to use the symbolic store patterns, but isn't needed. (symbolic_memory_operand): Delete, no longer used. (output_prologue): Don't check for suspicious register elimination changes. * tm-m88k.h (GO_IF_LEGITIMATE_ADDRESS): Treat the frame pointer like the argument pointer as both may change to REG+SMALLINT. Tue Apr 23 15:08:03 1991 Jim Wilson (wilson at cygnus.com) * out-sparc.c (output_scc_insn): Clean up and expand comments. Don't assume that JUMP_LABEL fields are always valid, they aren't when compiling without optimization. Mon Apr 22 13:56:43 1991 Michael Tiemann (tiemann at cygnus.com) * cplus-class.c (prepare_fresh_vtable): Thoroughly update virtual function tables that come from baseclasses to contain the latest overrides from derived classes. This was done (in a different way) for virtual baseclasses, but left undone for non-virtual baseclasses. (finish_struct_bits): Use assoc lists instead of class basetype list to walk through the classes base classes. This gives us more relavant classes to check against. * cplus-init.c (init_vfields): New function to recursively walk objects and make sure their vfields are initialized. * cplus-init.c (emit_base_init): Call `init_vfields' from top level. * cplus-tree.h (TYPE_IDENTIFIER): New macro, gives the IDENTIFIER_NODE for a given aggr TYPE. * cplus-class.c (add_method): Use TYPE_IDENTIFIER. * cplus-cvt.c (various places): Ditto. * cplus-class.c (finish_struct): Add TYPE_DECLs to the list of a class's members that come from the types implicitly declared tags. * cplus-decl.c (grokdeclarator): If a function is declared `static inline', don't give it global visibility, regardless of what #pragma interface/implementation suggests. * cplus-decl.c (finish_function): ??? Questionable change for PIC: don't let constructors and destructors that manipulate vtables go inline, since this somehow reduces page sharing. Really??? * cplus-except.c (init_exception_processing): Use `pushdecl' to install global info that this function sets up. That way later decls can override this info (such as with an inline function). * cplus-init.c (build_vec_delete): Set TREE_SIDE_EFFECTS of controller. Otherwise the loop won't execute. * cplus-method.c (prepare_inline): Rewritten and simplified. (do_inline_method_hair): Ditto. * cplus-tree.c (lang_output_debug_info): Only output nested type if we would also output enclosing type. * cplus-typekc.c (c_expand_return): Use pseudo for intermediate return value if necessary. GCC can't read the function return registers in an inline functino when the return value is being ignored. Mon Apr 22 14:36:01 1991 Jim Wilson (wilson at cygnus.com) * sched.c (init_alias_analysis): Handle REG_EQUIV notes just like REG_EQUAL notes. * sched.c (sched_analyze_2): Don't recurse on constant rtx's. This is necessary so that the cc0_rtx in CONST_DOUBLEs won't be seen. (sched_analyze): Call sched_analyze_insn for JUMP_INSNS also, so that cc0 users will get an automatic dependence on their previous insn. (launch_links): Ifdef out special treatment of insns which set the condition codes. This is obsolete, and was SPARC specific anyways. (new_sometimes_live): Clarify code that aborts if regno is greater than max_regno. (schedule_block): If the last insn sets cc0, then it must always be left in place. (new_insn_dead_notes): New function. Determines whether a SET or CLOBBER in an insn created by splitting needs a REG_DEAD or REG_UNUSED note added. (update_links): Ignore REG_EQUIV and REG_EQUAL notes on insns that have more than one set. Generalize flow analysis of the sets in the new insns so that it can handle new insns which have multiple sets or new clobbers. Mon Apr 22 08:15:50 1991 Michael Meissner (meissner at osf.org) * gcc.c (input_suffix): New global var; holds current file's suffix. (handle_braces): Substitute X in %{.S:X} if the current file has suffix .S. Similarly, substitute X in %{!.S:X} if the current file does not have suffix .S. (validate_switches): Ignore .S part in %{.S:X} construct. Sat Apr 20 14:41:17 1991 Micheal Tiemann (tiemann at pogo.gnu.ai.mit.edu) * final.c (leaf_function_p): Define this in any event. Sat Apr 20 10:45:43 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * loop.c (check_dbra_loop): Use GET_RTX_CLASS when appropriate. Check for setting biv with single_set rather than only allowing a SET. If a loop has a `break', we can't reverse it. * cse.c (cse_insn): Fold inside operands of a CALL (mostly to find the best address form to use). * cse.c (simplify_unary_operation): Convert (neg (neg ..)) to NEG. Similarly for NOT. (simplify_binary_operation): Simplify things like (-a) + b. Convert UDIV with divisor a constant power of two into LSHIFTRT. Similarly for UMOD. Only fold shifts of a zero by a value into zero if the value has no side effects. Remove code to handle negative shift counts. * tm-a29k.h (OPTIMIZATION_OPTIONS): Allow insn scheduling to be enabled, now that it works for the 29k. * tm-rs6000.h (LINK_SPEC): Add "-bhalt:4" to LINK_SPEC (don't ask!). Fri Apr 19 13:18:52 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * explow.c (memory_address): Test `cse_not_expected' instead of `optimize' so that we don't make new pseudos after flow is run. * genflags.c (gen_insn): If extra condition is more than one line, use \'s to make proper multi-line macro definition. Thu Apr 18 13:40:01 1991 Jim Wilson (wilson at cygnus.com) * loop.c (check_dbra_loop): Reenable no_use_except_for_counting code which was mistakenly ifdefed out as buggy. The actual bug was in strength_reduce, and has already been fixed. Thu Apr 18 09:47:25 1991 Richard Kenner (kenner at vlsi1.ultra.nyu.edu) * loop.c (record_giv): Allow for the case where regno_last_uid of DEST_REG has been moved or deleted. * rtlanal.c (replace_regs): Add missing argument in recursive call. * recog.c (nonmemory_operand): Only call general_operand for a SUBREG if it is a MEM, just like register_operand. * local-alloc.c (block_alloc): Handle case where the last insn of a REG_NO_CONFLICT block requires some CLOBBERs, but is a single SET. * out-romp.c, out-rs6000.c (next_insn_tests_no_unsigned): If a REG_UNUSED note for (cc0) is present on INSN, return 1. * jump.c (delete_jump): If the previous insn sets cc0 but we can't delete it for some reason, add a REG_UNUSED note for cc0 in that insn. * out-a29k.c: Rename input_operand to in_operand and output_operand to out_operand to avoid conflict with output_operand in final.c. * a29k.md: Likewise. (call patterns): Don't put SYMBOL_REF in MEM for recursive call; it might not be recursive if inlined; let cse do it later. * tm-a29k.h (RTX_COST, ADDRESS_COST): All addresses have the same cost, but MEM is expensive. Tue Apr 16 16:01:47 1991 Michael Meissner (meissner at osf.org) * configure: Add osfrose, osf, and mips/dec-osfrose. * out-mips.c (toplevel): Include necessary include files so out-mips.c can be compiled separately. (g_switch_value): New variable to hold -G xx value. (g_switch_set): New variable to indicate if -G xx used. (current_function_file): New variable to hold last .file. (file_in_function_warning): New variable to hold if we've warned the user that ECOFF can't switch files within a function. (mips_rtx_classify): New array to classify an insn. (mips_reg_names): New array to hold the register names. REGISTER_NAMES initializes all elements to point into here, and override_options resets the names if -mrnames is used. (mips_sw_reg_names): New array to hold the alternate register names. (mips_regno_to_class): New array to map hard register number to register class. (uns_arith_operand): Rewrite so call to register_operand is done last, not first. (arith_operand): ditto. (arith32_operand): ditto. (large_int): New function to return true if int constant will take 2 instructions to load into a register. (reg_or_0_operand): New function to return true if a register or constant 0 is the operand for use in store patterns. (md_register_operand): New function to return true if either the hi or lo register is used. (mips_const_double_ok): New function to return true if a CONST_DOUBLE can be used as a constant in a RTL expression. At present, only DImode constants and 0.0 is allowed. (simple_memory_operand): New function to return true if a memory reference is a simple register + small offset. (gp_memory_operand): New function to return true if a memory reference uses the global pointer. (mips_move_instructions): New function to handle all data movement of one word or less. (mips_move_2words_instructions): New function to handle all data movement of two words. (init_cumulative_args): Remove print_tree debug call. (function_arg_partial_nregs): Fix bug in passing structures where the wrong field was used. (print_options): Enable this function, body was in #if 0. (override_options): Spell function name with two r's. Change how the -G xx and -mGx options are handled. If neither passed use the appropriate default. If -mgas make sure debug format is DBX, and if not -mgas, use SDB debug format. If -mrnames and -mgas, give an error message, otherwise set up mips_reg_names. Set up the mips_rtx_classify array. (print_options): New function instead of a long macro. Add %C to print part of the opcode for a branch condition, %N to print the inverted branch condition, %( to do .set noreorder, %) to do .set reorder, %[ to do .set noat, %] to do .set at, %& to do .set noreorder if filling delay slots, and %# to print nop if delay slot not filled. (print_operand_address): New function instead of a long macro. (compute_frame_size): New function to abstract all the frame related information like frame size, saved registers, etc. (save_restore): Common function between the prologue and epilogue to save/restore the registers in the proper order. Make $31 saved at function pc +4. (function_prologue): Call compute_frame_size and save_restore. Make sure the appropriate .file is done before any statement in the prologue since the MIPS ECOFF requires this. (function_epilogue): Call compute_frame_size and save_restore. * tm-decstatn.h (CPP_PREDEFINES): Define the appropriate macros. (*_SPEC): Move the DECstation related specs here from tm-mips.h. * tm-decrose.h (new file): File to support OSF/1 with OSF/rose object format. * tm-mips-sysv.h (CPP_PREDEFINES): Define the appropriate macros. (*_SPEC): Move the DECstation related specs here from tm-mips.h. * tm-mips-bsd.h (CPP_PREDEFINES): Define the appropriate macros. (*_SPEC): Move the DECstation related specs here from tm-mips.h. * tm-mips-news.h (CPP_PREDEFINES): Define the appropriate macros. (*_SPEC): Move the DECstation related specs here from tm-mips.h. * tm-iris.h (CPP_PREDEFINES): Define the appropriate macros. (*_SPEC): Move the DECstation related specs here from tm-mips.h. (SET_FILE_NUMBER): Define, so that .file number is always 1. (LABEL_AFTER_LOC): Define, so that a label appears after .loc. (STACK_ARGS_ADJUST): Iris frames require 32 bytes at the top of the call frame instead of the normal MIPS 16. * mips.md (all): Add first cut at attributes to identify insn type. (all): Where appropriate, use @ form for alternates, instead of using C code. (define_delay): Put arithmetic and one word stores in call, jump, branch delay slots. (define_function_unit): Add functional unit definitions for memory and integer multiply/divide. (anonymous add/subtract insn): Remove support for reg + large offset that omitting the frame pointer caused in 1.xx to see if it is needed anymore. (mulsi3): Add clobbers for the hi/lo registers. Add a define_split and an anonymous define_insn to separate the mult instruction from the mflo. (divmodsi4): Add clobbers for the hi/lo registers. (udivmodsi4): Add clobbers for the hi/lo registers. (divsi3): Add clobbers for the hi/lo registers. Restrict divides and modulus to register / register. (modsi3): ditto. (udivsi3): ditto. (ymodsi3): ditto. (divide peepholes): Add two peepholes to catch divide followed by modulus of the same values. (anddi3): Remove pattern, use default behavior. (iordi3): Remove pattern, use default behavior. (xordi3): Remove pattern, use default behavior. (truncsiqi2): Remove pattern, use default behavior. (truncsihi2): Remove pattern, use default behavior. (trunchiqi2): Remove pattern, use default behavior. (truncdfsf2): Remove asm comment. (extendhisi2): Add a define_split for shift case. (extendqisi2): Add a define_split for shift case. (extendqihi2): Add a define_split for shift case. (movdi): Turn into a define_expand to guarantee that memory <-> memory moves go through a register. (movsi): ditto. (movhi): ditto. (movqi): ditto. (movsf): ditto. (movdf): ditto. (movdi_internal): new define_insn. Add fp registers to the alternatives. Call mips_move_2words_instructions to do the actual movement. Require memory addresses to be offsetable. (movdf_internal): ditto. (movsi_internal): new define_insn. Add storing 0 to memory directly using $0. Add transfer to/from multiply/divide registers, and to the fp status register. Call mips_move_instructions to do the actual work. (movhi_internal): ditto. (movqi_internal): ditto. (movsf_internal): ditto. (jump): Add %& to turn on .set noreorder if filling delay slot. (tablejump): Ditto. (call): Ditto. (call_value): Ditto. (indirect_jump): New required pattern, add %& for delay slot. (nop): Use %( %) to turn on/off .set noreorder. (probe): Use %[ %] to turn on/off .set noat. * tm-mips.h (abort): Define abort to be fancy_abort for now. (toplevel): Move all extern's to the start of the file, rather than scattered throughout. (OPTIMIZATION_OPTIONS): New macro, -O sets -fomit-frame-pointer, and -fdelayed-branch. -O2 sets -fstrength-reduce, -fcse-follow-jumps, -fexpensive-optimizations, -fthread-jumps, -frerun-cse-after-loop. -O3 sets -finline-functions. (*_SPEC): Move most of the target specific spec's to the appropriate file, rather than defining them in tm-mips.h. Defaults are for MIPS RISC-OS with default system. (CPP_SPEC): If preprocessing .S files, define LANGUAGE_ASSEMBLY instead of LANGUAGE_C. (MIPS_VERSION): Add meissner version number. (MIPS_DEBUGGING_INFO): Define this for the future. (TARGET_*): reorder which bit means what. Add bits so we can tell whether any of the -mG[012] options were used. Redefine some debug switches. (BYTES_BIG_ENDIAN): Always define to 0/1 now. (WORDS_BIG_ENDIAN): Always define to 0/1 now. (MAX_PARM_BOUNDARY): Delete, since it's no longer used. (BIGGEST_FIELD_ALIGNMENT): Define to be 64. (CONSTANT_ALIGNMENT): New macro, make sure strings are aligned. (DATA_ALIGNMENT): New macro, make sure byte arrays are aligned. (FIRST_PSEUDO_REGISTER): Bump to 67, add hi, lo, fcr31. (FIXED_REGISTERS): Add initializations for hi, lo, and fcr31. (CALL_USED_REGISTERS): Add initializations for hi, lo, and fcr31. (MD_REG_P): New macro to return if hi/lo register. (ST_REG_P): New macro to return if fp control register. (HARD_REGNO_NREGS): Return 4 for single precision complex. (MODES_TIEABLE_P): Add complex float type support. (FRAME_POINTER_REQUIRED): Make this always 0. (NO_RECURSIVE_FUNCTION_CSE): New macro, define as 1. (enum reg_class): Add class for the hi register, lo register, either hi or lo registers, status registers. (REG_CLASS_NAMES): Support new register classes. (REG_CLASS_CONTENTS): ditto. (REG_CLASS_FROM_LETTER): ditto. (REGNO_REG_CLASS): Use an array to map register # -> class. (CONST_OK_FOR_LETTER_P): Add `L' for constants which have bottom 16 bits all zero, and `M' which require two instructions to load. (CONST_DOUBLE_OK_FOR_LETTER_P): Use `CONST_DOUBLE_HIGH' and `CONST_DOUBLE_LOW'. (EXTRA_CONSTRAINT): New macro, `Q' for gp memory references, and `R' for reg + small offset references. (struct mips_frame_info): New structure to hold all frame related information, calculated by compute_frame_size. (INITIAL_FRAME_POINTER_OFFSET): New macro, use compute_frame_size to calculate where the frame should go. (ACCUMULATE_OUTGOING_ARGS): New macro, define so stack pushes are folded into the frame. (REG_PARM_STACK_SPACE): Redefine to take an argument and return 16. (OUTGOING_REG_PARM_STACK_SPACE): New macro, define to say we must allocate stack space for arguments passed in registers. (TARGET_FLOAT_FORMAT): New macro, define as IEEE_FLOAT_FORMAT. (FUNCTION_ARG_BOUNDARY): New macro to determine argument padding requirements. (MIPS_STACK_ALIGN): New name for AL_ADJUST_ALIGN macro. (FIX_FRAME_POINTER_ADDRESS): Delete, no longer used. (FUNCTION_PROFILER): No longer have to switch between different register names, override_options now sets up reg_names correctly. (TRAMPOLINE_TEMPLATE): New macro, define as a dummy. (TRAMPOLINE_SIZE): ditto. (INITIALIZE_TRAMPOLINE): ditto. (INDIRECTABLE_ADDRESS): Delete, fold into GO_IF_LEGITIMATE_ADDRESS. (GO_IF_LEGITIMATE_ADDRESS): If -mdebuga, don't allow