In the spirit of TRegions [0], this patch provides a simpler and uniform
interface for a kernel to set up the device runtime. The OMPIRBuilder is
used for reuse in Flang. A custom state machine will be generated in the
follow up patch.
The "surplus" threads of the "master warp" will not exit early anymore
so we need to use non-aligned barriers. The new runtime will not have an
extra warp but also require these non-aligned barriers.
[0] https://link.springer.com/chapter/10.1007/978-3-030-28596-8_11
This was in parts extracted from D59319.
Reviewed By: ABataev, JonChesterfield
Differential Revision: https://reviews.llvm.org/D101976
Broke check-clang, see https://reviews.llvm.org/D102307#2869065
Ran `git revert -n ebbe149a6f08535ede848a531a601ae6591cfbc5..269416d41908bb670f67af689155d5ab8eea689a`
In the spirit of TRegions [0], this patch provides a simpler and uniform
interface for a kernel to set up the device runtime. The OMPIRBuilder is
used for reuse in Flang. A custom state machine will be generated in the
follow up patch.
The "surplus" threads of the "master warp" will not exit early anymore
so we need to use non-aligned barriers. The new runtime will not have an
extra warp but also require these non-aligned barriers.
[0] https://link.springer.com/chapter/10.1007/978-3-030-28596-8_11
This was in parts extracted from D59319.
Reviewed By: ABataev, JonChesterfield
Differential Revision: https://reviews.llvm.org/D101976
Need to emit a call for __kmpc_cancel_barrier in the exit block for
__kmpc_cancel function call if cancellation of the parallel block is
requested.
Differential Revision: https://reviews.llvm.org/D103646
When lowering the dynamic, guided, auto and runtime types of scheduling,
there is an optional monotonic or non-monotonic modifier. This patch
adds support in the OMP IR Builder to pass this down to the runtime
functions.
Also implements tests for the variants.
Differential Revision: https://reviews.llvm.org/D102008
When lowering the dynamic, guided, auto and runtime types of scheduling,
there is an optional monotonic or non-monotonic modifier. This patch
adds support in the OMP IR Builder to pass this down to the runtime
functions.
Also implements tests for the variants.
Differential Revision: https://reviews.llvm.org/D102008
When using parallel loop construct, the OpenMP specification allows for
guided, auto and runtime as scheduling variants (as well as static and
dynamic which are already supported).
This adds the translation from MLIR to LLVM-IR for these scheduling
variants.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D101435
Add function to create the offload_maptypes and the offload_mapnames globals. These two functions
are used in clang. They will be used in the Flang/MLIR lowering as well.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D101503
This patch adds section support in the OpenMP IRBuilder module, along with a test for the same.
Reviewed By: fghanim
Differential Revision: https://reviews.llvm.org/D89671
The implementation supports static schedule for Fortran do loops. This
implements the dynamic variant of the same concept.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D97393
Summary:
Currently the OMPIRBuilder overwrites the function's existing attributes
when it assigns the ones defined in OMPKinds.def. This changes the
behaviour to append the current function's attributes with them instead.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D98740
Follow up from D92955 and D83636. This patch makes the base cpp files
OMP.cpp and ACC.cpp normal files and they now include the XXX.inc file
generated by tablegen. This reduces the number of file generated by the
DirectiveEmitter backend and makes it closer to the proposal in D83636.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D93560
If we have nested declare variant context, it doesn't make sense to
inherit the match extension from the parent. Instead, just skip it.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D95764
Initial support for using the OpenMPIRBuilder by clang to generate loops using the OpenMPIRBuilder. This initial support is intentionally limited to:
* Only the worksharing-loop directive.
* Recognizes only the nowait clause.
* No loop nests with more than one loop.
* Untested with templates, exceptions.
* Semantic checking left to the existing infrastructure.
This patch introduces a new AST node, OMPCanonicalLoop, which becomes parent of any loop that has to adheres to the restrictions as specified by the OpenMP standard. These restrictions allow OMPCanonicalLoop to provide the following additional information that depends on base language semantics:
* The distance function: How many loop iterations there will be before entering the loop nest.
* The loop variable function: Conversion from a logical iteration number to the loop variable.
These allow the OpenMPIRBuilder to act solely using logical iteration numbers without needing to be concerned with iterator semantics between calling the distance function and determining what the value of the loop variable ought to be. Any OpenMP logical should be done by the OpenMPIRBuilder such that it can be reused MLIR OpenMP dialect and thus by flang.
The distance and loop variable function are implemented using lambdas (or more exactly: CapturedStmt because lambda implementation is more interviewed with the parser). It is up to the OpenMPIRBuilder how they are called which depends on what is done with the loop. By default, these are emitted as outlined functions but we might think about emitting them inline as the OpenMPRuntime does.
For compatibility with the current OpenMP implementation, even though not necessary for the OpenMPIRBuilder, OMPCanonicalLoop can still be nested within OMPLoopDirectives' CapturedStmt. Although OMPCanonicalLoop's are not currently generated when the OpenMPIRBuilder is not enabled, these can just be skipped when not using the OpenMPIRBuilder in case we don't want to make the AST dependent on the EnableOMPBuilder setting.
Loop nests with more than one loop require support by the OpenMPIRBuilder (D93268). A simple implementation of non-rectangular loop nests would add another lambda function that returns whether a loop iteration of the rectangular overapproximation is also within its non-rectangular subset.
Reviewed By: jdenny
Differential Revision: https://reviews.llvm.org/D94973
The collapseLoops method implements a transformations facilitating the implementation of the collapse-clause. It takes a list of loops from a loop nest and reduces it to a single loop that can be used by other methods that are implemented on just a single loop, such as createStaticWorkshareLoop.
This patch shares some changes with D92974 (such as adding some getters to CanonicalLoopNest), used by both patches.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D93268
Address the compiler warning
OMPIRBuilder.cpp:1232:27: comparison of integers of different signs: 'size_t' (aka 'unsigned long') and 'int' [-Wsign-compare]
The tileLoops method implements the code generation part of the tile directive introduced in OpenMP 5.1. It takes a list of loops forming a loop nest, tiles it, and returns the CanonicalLoopInfo representing the generated loops.
The implementation takes n CanonicalLoopInfos, n tile size Values and returns 2*n new CanonicalLoopInfos. The input CanonicalLoopInfos are invalidated and BBs not reused in the new loop nest removed from the function.
In a modified version of D76342, I was able to correctly compile and execute a tiled loop nest.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D92974
The existing implementation of parallel region merging applies only to
consecutive parallel regions that have speculatable sequential
instructions in-between. This patch lifts this limitation to expand
merging with any sequential instructions in-between, except calls to
unmergable OpenMP runtime functions. In-between sequential instructions
in the merged region are sequentialized in a "master" region and any
output values are broadcasted to the following parallel regions and the
sequential region continuation of the merged region.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D90909
The triple uses a bar "x86-64" instead of an underscore. Since we
have troubles accepting x86-64 as an identifier, we stick with
x86_64 in the frontend and translate it explicitly.
Reviewed By: tianshilei1992
Differential Revision: https://reviews.llvm.org/D93786
Extract some changes not directly related to tileLoops out of D92974:
* Refactor `createLoopSkeleton` out of `createCanonicalLoop`.
* Introduce `ComputeIP` parameter to the `createCanonicalLoop` overload inserts instructions to compute the trip count. Specifying the location is necessary to make these instructions appear before the outermost loop of a loop nest that is tiled.
* Introduce `Name` parameter to `createCanonicalLoop`. This can help better understanding the origin of values of basic blocks with many loops. The default value is "loop" instead of "for" which could be confused with the "for directive" (aka worksharing-loop) and does not apply to Fortran.
* Remove `CanonicalLoopInfo::eraseFromParent` which is currently unused and untested and was added in anticipation to be used by `tileLoops`. `eraseFromParent` has shown to be insufficient when more than a single loop is involved and is replaced by `removeUnusedBlocksFromParent` in D92974.
Reviewed By: SouraVX
Differential Revision: https://reviews.llvm.org/D93088
The original code was inserting the barrier at the location given by the
caller. Make sure it is always inserted at the end of the loop exit block
instead.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D92849
Introduce a function that creates a statically-scheduled workshare loop
out of a canonical loop created earlier by the OpenMPIRBuilder. This
basically amounts to injecting runtime calls to the preheader and the
after block and updating the trip count. Static scheduling kind is
currently hardcoded and needs to be extracted from the runtime library
into common TableGen definitions.
Differential Revision: https://reviews.llvm.org/D92476
OpenMPIRBuilder::createParallel outlines the body region of the parallel
construct into a new function that accepts any value previously defined outside
the region as a function argument. This function is called back by OpenMP
runtime function __kmpc_fork_call, which expects trailing arguments to be
pointers. If the region uses a value that is not of a pointer type, e.g. a
struct, the produced code would be invalid. In such cases, make createParallel
emit IR that stores the value on stack and pass the pointer to the outlined
function instead. The outlined function then loads the value back and uses as
normal.
Reviewed By: jdoerfert, llitchev
Differential Revision: https://reviews.llvm.org/D92189
There's a small number of users of this function, they are all updated.
This updates the C API adding a new method LLVMGetTypeByName2 that takes a context and a name.
Differential Revision: https://reviews.llvm.org/D78793
This will ensure that passes that add new global variables will create them
in address space 1 once the passes have been updated to no longer default
to the implicit address space zero.
This also changes AutoUpgrade.cpp to add -G1 to the DataLayout if it wasn't
already to present to ensure bitcode backwards compatibility.
Reviewed by: arsenm
Differential Revision: https://reviews.llvm.org/D84345
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
For consistency with the IRBuilder, OpenMPIRBuilder has method names starting with 'Create'. However, the LLVM coding style has methods names starting with lower case letters, as all other OpenMPIRBuilder already methods do. The clang-tidy configuration used by Phabricator also warns about the naming violation, adding noise to the reviews.
This patch renames all `OpenMPIRBuilder::CreateXYZ` methods to `OpenMPIRBuilder::createXYZ`, and updates all in-tree callers.
I tested check-llvm, check-clang, check-mlir and check-flang to ensure that I did not miss a caller.
Reviewed By: mehdi_amini, fghanim
Differential Revision: https://reviews.llvm.org/D91109
CreateCanonicalLoop generates a standardized control flow structure for OpenMP canonical for loops. The structure can be consumed by loop-associated directives such as worksharing-loop, distribute, simd etc. as well as loop transformations such as tile and unroll.
This is a first design without considering all complexities yet. The control-flow emits more basic block than strictly necessary, but these will be optimized by CFGSimplify anyway, provide a nice separation of concerns and might later be useful with more complex scenarios. I successfully implemented a basic tile construct using this API, which is not part of this patch.
The fundamental building block is the CreateCanonicalLoop that only takes the loop trip count and operates on the logical iteration spaces only. An overloaded CreateCanonicalLoop for using LB, UB, Increment is provided as well, but at least for C++, Clang will need to implement a loop counter to logical induction variable mapping anyway, since iterator overload resolution cannot be done in LLVMFrontend.
As there currently is no user for CreateCanonicalLoop, it is only called from unittests. Similarly, CanonicalLoopInfo::eraseFromParent() is used in my file implementation and might be generally useful for implementing loop-associated constructs, but is not used in this patch itself.
The following non-exhaustive list describes not yet covered items:
* collapse clause (including non-rectangular and non-perfectly nested); idea is to provide a OpenMPIRBuilder::collapseLoopNest method consuming multiple nested loops and returning a new CanonicalLoopInfo that can be used for loop-associated directives.
* simarly: ordered clause for DOACROSS loops
* branch weights
* Cancellation point (?)
* AllocaIP
* break statement (if needed at all)
* Exceptions (if not completely handled in the front-end)
* Using it in Clang; this requires implementing at least one loop-associated construct.
* ...
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D90830
[OpenMP] Emit calls to int64_t functions for amdgcn
Two functions, syncwarp and active_thread_mask, return lanemask_t. Currently
this is assumed to be int32, which is true for nvptx. Patch makes the type
target architecture dependent.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D89746
Replace the `ident_t` handling in Clang with the methods offered by the
OMPIRBuilder. This cuts down on the clang code as well as the
differences between the two, making further transitions easier. Tests
have changed but there should not be a real functional change. The most
interesting difference is probably that we stop generating local ident_t
allocations for now and just use globals. Given that this happens only
with debug info, the location part of the `ident_t` is probably bigger
than the test anyway. As the location part is already a global, we can
avoid the allocation, memcpy, and store in favor of a constant global
that is slightly bigger. This can be revisited if there are
complications.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D80735
We need to keep track of the alloca insertion point (which we already
communicate via the callback to the user) as we place allocas as well.
Reviewed By: fghanim, SouraVX
Differential Revision: https://reviews.llvm.org/D82470
It was unclear what `isa` was supposed to mean so we did not provide any
traits for this context selector. With this patch we will allow *any*
string or identifier. We use the target attribute and target info to
determine if the trait matches. In other words, we will check if the
provided value is a target feature that is available (at the call site).
Fixes PR46338
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D83281
During code generation we might change/add basic blocks so keeping a
list of them is fairly easy to break. Nested parallel regions were
enough. The new scheme does recompute the list of blocks to be outlined
once it is needed.
Reviewed By: anchu-rajendran
Differential Revision: https://reviews.llvm.org/D82722
Summary:
Diff D83176 moved the last piece of code from OMPConstants.cpp and now this file was only
useful to include the tablegen generated file. This patch replace OMPConstants.cpp with OMP.cpp
generated by tablegen.
Reviewers: sstefan1, jdoerfert, jdenny
Reviewed By: sstefan1
Subscribers: mgorny, yaxunl, hiraditya, guansong, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83583
Summary:
D82193 exposed a problem with global type definitions in
`OMPConstants.h`. This causes a race when running in thinLTO mode.
Types now live inside of OpenMPIRBuilder to prevent this from happening.
Reviewers: jdoerfert
Subscribers: yaxunl, hiraditya, guansong, dexonsmith, aaron.ballman, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D83176
Summary:
Generate the isAllowedClauseForDirective function from tablegen. This patch introduce
the VersionedClause in the tablegen file so that clause can be encapsulated in this class to
specify a range of validity on a directive.
VersionedClause has default minVersion, maxVersion so it can be used without them or
minVersion.
Reviewers: jdoerfert, jdenny
Reviewed By: jdenny
Subscribers: yaxunl, hiraditya, guansong, jfb, sstefan1, aaron.ballman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82982
