This patch adds an option to enable the new pass manager in
LTOCodeGenerator. It also updates a few tests with legacy PM specific
tests, which started failing after 6a59f0560648 when
LLVM_ENABLE_NEW_PASS_MANAGER=true.
As it looks like NewPM generally is using SimpleLoopUnswitch
instead of LoopUnswitch, this patch also use SimpleLoopUnswitch
in the ExtraVectorizerPasses sequence (compared with LegacyPM
which use the LoopUnswitch pass).
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D95457
We tend to assume that the AA pipeline is by default the default AA
pipeline and it's confusing when it's empty instead.
PR48779
Initially reverted due to BasicAA running analyses in an unspecified
order (multiple function calls as parameters), fixed by fetching
analyses before the call to construct BasicAA.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95117
This patch sets the default for llvm tests, with the exception of tests
under Reduce, because quite a few of them use 'FileCheck' as parameter
to a tool, and including a flag as that parameter would complicate
matters.
The rest of the patch undo-es the lit.local.cfg changes we progressively
introduced as temporary measure to avoid regressions under various
directories.
Differential Revision: https://reviews.llvm.org/D95111
We tend to assume that the AA pipeline is by default the default AA
pipeline and it's confusing when it's empty instead.
PR48779
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95117
RISC-V would like to use a struct of scalable vectors to return multiple
values from intrinsics. This woud also be needed for target independent
intrinsics like llvm.sadd.overflow.
This patch removes the existing restriction for this. I've modified
StructType::isSized to consider a struct containing scalable vectors
as unsized so the verifier won't allow loads/stores/allocas of these
structs.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D94142
Expanding from D94808 - we ensure the same InlineAdvisor is used by both
InlinerPass instances. The notion of mandatory inlining is moved into
the core InlineAdvisor: advisors anyway have to handle that case, so
this change also factors out that a bit better.
Differential Revision: https://reviews.llvm.org/D94825
Summary:
Introduce a new mode of operation for -print-changed that only reports
after a pass changes the IR with all of the other messages suppressed (ie,
no initial IR and no messages about ignored, filtered or non-modifying
passes).
The option processing for -print-changed is changed to take an optional
string indicating options for print-changed. Initially, the only option
supported is quiet (as described above). This new quiet mode is specified
with -print-changed=quiet while -print-changed will continue to function
in the same way. It is intended that there will be more options in the
future.
Author: Jamie Schmeiser <schmeise@ca.ibm.com>
Reviewed By: aeubanks (Arthur Eubanks)
Differential Revision: https://reviews.llvm.org/D92589
This currently blocks --print-before/after with a legacy PM pass, for
example when we use the new PM for the optimization pipeline but the
legacy PM for the codegen pipeline. Also in the future when the codegen
pipeline works with the new PM there will be multiple places to specify
passes, so even when everything is using the new PM, there will still be
multiple places that can accept different pass names.
Reviewed By: hoy, ychen
Differential Revision: https://reviews.llvm.org/D94283
We have modules with metadata on declarations, and out-of-tree passes
use that metadata, and we need to clone those modules. We really expect
such metadata is kept during the clone operation.
Reviewed by: arsenm, aprantl
Differential Revision: https://reviews.llvm.org/D93451
`UniqueInternalLinkageNamesPass` is useful to CSSPGO, especially when pseudo probe is used. It solves naming conflict for static functions which otherwise will share a merged profile and likely have a profile quality issue with mismatched CFG checksums. Since the pseudo probe instrumentation happens very early in the pipeline, I'm moving `UniqueInternalLinkageNamesPass` right before it. This is being done only to the new pass manager.
Reviewed By: dblaikie, aeubanks
Differential Revision: https://reviews.llvm.org/D93656
CGSCCOptimizerLateEPCallbacks are supposed to be run before the function
simplification pipeline, like in the legacy PM and as specified in the
comments for registerCGSCCOptimizerLateEPCallback().
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D93871
The AnnotationRemarks pass is already run at the end of the module
pipeline. This patch also adds it before bailing out for -O0, so remarks
are also generated with -O0.
Currently, -ftime-report + new pass manager emits one line of report for each
pass run. This potentially causes huge output text especially with regular LTO
or large single file (Obeserved in private tests and was reported in D51276).
The behaviour of -ftime-report + legacy pass manager is
emitting one line of report for each pass object which has relatively reasonable
text output size. This patch adds a flag `-ftime-report=` to control time report
aggregation for new pass manager.
The flag is for new pass manager only. Using it with legacy pass manager gives
an error. It is a driver and cc1 flag. `per-pass` is the new default so
`-ftime-report` is aliased to `-ftime-report=per-pass`. Before this patch,
functionality-wise `-ftime-report` is aliased to `-ftime-report=per-pass-run`.
* Adds an boolean variable TimePassesHandler::PerRun to control per-pass vs per-pass-run.
* Adds a new clang CodeGen flag CodeGenOptions::TimePassesPerRun to work with the existing CodeGenOptions::TimePasses.
* Remove FrontendOptions::ShowTimers, its uses are replaced by the existing CodeGenOptions::TimePasses.
* Remove FrontendTimesIsEnabled (It was introduced in D45619 which was largely reverted.)
Differential Revision: https://reviews.llvm.org/D92436
Currently PassBuilder.cpp is by far the file that takes longest to
compile. This is due to tons of templates being instantiated per pass.
Follow PassManager by using wrappers around passes to avoid making
the adaptors templated on the pass type. This allows us to move various
adaptors' run methods into .cpp files.
This reduces the compile time of PassBuilder.cpp on my machine from 66
to 39 seconds. It also reduces the size of opt from 685M to 676M.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D92616
This changes --print-before/after to be a list of strings rather than
legacy passes. (this also has the effect of not showing the entire list
of passes in --help-hidden after --print-before/after, which IMO is
great for making it less verbose).
Currently PrintIRInstrumentation passes the class name rather than pass
name to llvm::shouldPrintBeforePass(), meaning
llvm::shouldPrintBeforePass() never functions as intended in the NPM.
There is no easy way of converting class names to pass names outside of
within an instance of PassBuilder.
This adds a map of pass class names to their short names in
PassRegistry.def within PassInstrumentationCallbacks. It is populated
inside the constructor of PassBuilder, which takes a
PassInstrumentationCallbacks.
Add a pointer to PassInstrumentationCallbacks inside
PrintIRInstrumentation and use the newly created map.
This is a bit hacky, but I can't think of a better way since the short
id to class name only exists within PassRegistry.def. This also doesn't
handle passes not in PassRegistry.def but rather added via
PassBuilder::registerPipelineParsingCallback().
llvm/test/CodeGen/Generic/print-after.ll doesn't seem very useful now
with this change.
Reviewed By: ychen, jamieschmeiser
Differential Revision: https://reviews.llvm.org/D87216
This is the #2 of 2 changes that make remarks hotness threshold option
available in more tools. The changes also allow the threshold to sync with
hotness threshold from profile summary with special value 'auto'.
This change expands remarks hotness threshold option
-fdiagnostics-hotness-threshold in clang and *-remarks-hotness-threshold in
other tools to utilize hotness threshold from profile summary.
Remarks hotness filtering relies on several driver options. Table below lists
how different options are correlated and affect final remarks outputs:
| profile | hotness | threshold | remarks printed |
|---------|---------|-----------|-----------------|
| No | No | No | All |
| No | No | Yes | None |
| No | Yes | No | All |
| No | Yes | Yes | None |
| Yes | No | No | All |
| Yes | No | Yes | None |
| Yes | Yes | No | All |
| Yes | Yes | Yes | >=threshold |
In the presence of profile summary, it is often more desirable to directly use
the hotness threshold from profile summary. The new argument value 'auto'
indicates threshold will be synced with hotness threshold from profile summary
during compilation. The "auto" threshold relies on the availability of profile
summary. In case of missing such information, no remarks will be generated.
Differential Revision: https://reviews.llvm.org/D85808
Enable performing mandatory inlinings upfront, by reusing the same logic
as the full inliner, instead of the AlwaysInliner. This has the
following benefits:
- reduce code duplication - one inliner codebase
- open the opportunity to help the full inliner by performing additional
function passes after the mandatory inlinings, but before th full
inliner. Performing the mandatory inlinings first simplifies the problem
the full inliner needs to solve: less call sites, more contextualization, and,
depending on the additional function optimization passes run between the
2 inliners, higher accuracy of cost models / decision policies.
Note that this patch does not yet enable much in terms of post-always
inline function optimization.
Differential Revision: https://reviews.llvm.org/D91567
Currently, `-indvars` runs first, and then immediately after `-loop-idiom` does.
I'm not really sure if `-loop-idiom` requires `-indvars` to run beforehand,
but i'm *very* sure that `-indvars` requires `-loop-idiom` to run afterwards,
as it can be seen in the phase-ordering test.
LoopIdiom runs on two types of loops: countable ones, and uncountable ones.
For uncountable ones, IndVars obviously didn't make any change to them,
since they are uncountable, so for them the order should be irrelevant.
For countable ones, well, they should have been countable before IndVars
for IndVars to make any change to them, and since SCEV is used on them,
it shouldn't matter if IndVars have already canonicalized them.
So i don't really see why we'd want the current ordering.
Should this cause issues, it will give us a reproducer test case
that shows flaws in this logic, and we then could adjust accordingly.
While this is quite likely beneficial in-the-wild already,
it's a required part for the full motivational pattern
behind `left-shift-until-bittest` loop idiom (D91038).
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D91800
This matches the legacy PM's EP_ModuleOptimizerEarly. Some backends use
this extension point and adding the pass somewhere else like
PipelineStartEPCallback doesn't work.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D91804
The devirtualization wrapper misses cases where if it wraps a pass
manager, an individual pass may devirtualize an indirect call created by
a previous pass. For example, inlining may create a new indirect call
which is devirtualized by instcombine. Currently the devirtualization
wrapper will not see that because it only checks cgscc edges at the very
beginning and end of the pass (manager) it wraps.
This fixes some tests testing this exact behavior in the legacy PM.
Instead of checking WeakTrackingVHs for CallBases at the very beginning
and end of the pass it wraps, check every time
updateCGAndAnalysisManagerForPass() is called.
check-llvm and check-clang with -abort-on-max-devirt-iterations-reached
on by default doesn't show any failures outside of tests specifically
testing it so it doesn't needlessly rerun passes more than necessary.
(The NPM -O2/3 pipeline run the inliner/function simplification pipeline
under a devirtualization repeater pass up to 4 times by default).
http://llvm-compile-time-tracker.com/?config=O3&stat=instructions&remote=aeubanks
shows that 7zip has ~1% compile time regression. I looked at it and saw
that there indeed was devirtualization happening that was not previously
caught, so now it reruns the CGSCC pipeline on some SCCs, which is WAI.
The initial land assumed CallBase WeakTrackingVHs would always be
CallBases, but they can be RAUW'd with undef.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D89587
This reuses the existing lower-matrix-intrinsics pass rather than going
the legacy pass route of creating a new pass.
Use this new variant in the NPM -O0 pipeline.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D91811
This moves handling of alwaysinline, coroutines, matrix lowering, PGO,
and LTO-required passes into PassBuilder. Much of this is replicated
between Clang and opt. Other out-of-tree users also replicate some of
this, such as Rust [1] replicating the alwaysinline, LTO, and PGO
passes.
The LTO passes are also now run in
build(Thin)LTOPreLinkDefaultPipeline() since they are semantically
required for (Thin)LTO.
[1]: f5230fbf76/compiler/rustc_llvm/llvm-wrapper/PassWrapper.cpp (L896)
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D91585
This patch adds a new pass to add !annotation metadata for entries in
@llvm.global.anotations, which is generated using
__attribute__((annotate("_name"))) on functions in Clang.
This has been discussed on llvm-dev as part of
RFC: Combining Annotation Metadata and Remarks
http://lists.llvm.org/pipermail/llvm-dev/2020-November/146393.html
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D91195
This patch adds a new !annotation metadata kind which can be used to
attach annotation strings to instructions.
It also adds a new pass that emits summary remarks per function with the
counts for each annotation kind.
The intended uses cases for this new metadata is annotating
'interesting' instructions and the remarks should provide additional
insight into transformations applied to a program.
To motivate this, consider these specific questions we would like to get answered:
* How many stores added for automatic variable initialization remain after optimizations? Where are they?
* How many runtime checks inserted by a frontend could be eliminated? Where are the ones that did not get eliminated?
Discussed on llvm-dev as part of 'RFC: Combining Annotation Metadata and Remarks'
(http://lists.llvm.org/pipermail/llvm-dev/2020-November/146393.html)
Reviewed By: thegameg, jdoerfert
Differential Revision: https://reviews.llvm.org/D91188
Summary:
Add an option -print-before-changed that modifies the print-changed
behaviour so that it prints the IR before a pass that changed it in
addition to printing the IR after the pass. Note that the option
does nothing in isolation. The filtering options work as expected.
Lit tests are included.
Author: Jamie Schmeiser <schmeise@ca.ibm.com>
Reviewed By: aeubanks (Arthur Eubanks)
Differential Revision: https://reviews.llvm.org/D88757
Some targets may add required passes via
TargetMachine::registerPassBuilderCallbacks(). We need to run those even
under -O0. As an example, BPFTargetMachine adds
BPFAbstractMemberAccessPass, a required pass.
This also allows us to clean up BackendUtil.cpp (and out-of-tree Rust
usage of the NPM) by allowing us to share added passes like coroutines
and sanitizers between -O0 and other optimization levels.
Since callbacks may end up not adding passes, we need to check if the
pass managers are empty before adding them, so PassManager now has an
isEmpty() function. For example, polly adds callbacks but doesn't always
add passes in those callbacks, so this is necessary to keep
-debug-pass-manager tests' output from changing depending on if polly is
enabled or not.
Tests are a continuation of those added in
https://reviews.llvm.org/D89083.
Reviewed By: asbirlea, Meinersbur
Differential Revision: https://reviews.llvm.org/D89158
The LoopDistribute pass is missing from the LTO pipeline, so
-enable-loop-distribute has no effect during post-link. The pre-link
loop distribution doesn't seem to survive the LTO pipeline either.
With this patch (and -flto -mllvm -enable-loop-distribute) we see a 43%
uplift on SPEC 2006 hmmer for AArch64. The rest of SPECINT 2006 is
unaffected.
Differential Revision: https://reviews.llvm.org/D89896
This instruments a should-run-optional-pass callback using the existing
OptBisect class to decide if new passes should be skipped. Passes that
force isRequired never reach this at all, so they are not included in
"BISECT:" output nor its pass count.
The test case is resurrected from r267022, an early version of D19172
that had new pass manager support (later reverted and redone without).
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D87951
This reverts commit ae38540042668675dd16c642d850115f217ea59f.
As well as some follow-up test fixes.
The original change causes new-pass-manager.ll to fail when polly is enabled.
From C11 and C++11 onwards, a forward-progress requirement has been
introduced for both languages. In the case of C, loops with non-constant
conditionals that do not have any observable side-effects (as defined by
6.8.5p6) can be assumed by the implementation to terminate, and in the
case of C++, this assumption extends to all functions. The clang
frontend will emit the `mustprogress` function attribute for C++
functions (D86233, D85393, D86841) and emit the loop metadata
`llvm.loop.mustprogress` for every loop in C11 or later that has a
non-constant conditional.
This patch modifies LoopDeletion so that only loops with
the `llvm.loop.mustprogress` metadata or loops contained in functions
that are required to make progress (`mustprogress` or `willreturn`) are
checked for observable side-effects. If these loops do not have an
observable side-effect, then we delete them.
Loops without observable side-effects that do not satisfy the above
conditions will not be deleted.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86844
Some targets may add required passes via
TargetMachine::registerPassBuilderCallbacks(). We need to run those even
under -O0. As an example, BPFTargetMachine adds
BPFAbstractMemberAccessPass, a required pass.
This also allows us to clean up BackendUtil.cpp (and out-of-tree Rust
usage of the NPM) by allowing us to share added passes like coroutines
and sanitizers between -O0 and other optimization levels.
Tests are a continuation of those added in
https://reviews.llvm.org/D89083.
In order to prevent TargetMachines from adding unnecessary optimization
passes at -O0, TargetMachine::registerPassBuilderCallbacks() will be
changed to take an OptimizationLevel, but that will be done separately.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D89158
The LoopDistribute pass is missing from the LTO pipeline, so
-enable-loop-distribute has no effect during post-link. The pre-link
loop distribution doesn't seem to survive the LTO pipeline either.
With this patch (and -flto -mllvm -enable-loop-distribute) we see a 43%
uplift on SPEC 2006 hmmer for AArch64. The rest of SPECINT 2006 is
unaffected.
Differential Revision: https://reviews.llvm.org/D89896
