Interleaved memory accesses are grouped and vectorized into vector load/store and shufflevector.
E.g. for (i = 0; i < N; i+=2) {
a = A[i]; // load of even element
b = A[i+1]; // load of odd element
... // operations on a, b, c, d
A[i] = c; // store of even element
A[i+1] = d; // store of odd element
}
The loads of even and odd elements are identified as an interleave load group, which will be transfered into vectorized IRs like:
%wide.vec = load <8 x i32>, <8 x i32>* %ptr
%vec.even = shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 0, i32 2, i32 4, i32 6>
%vec.odd = shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 1, i32 3, i32 5, i32 7>
The stores of even and odd elements are identified as an interleave store group, which will be transfered into vectorized IRs like:
%interleaved.vec = shufflevector <4 x i32> %vec.even, %vec.odd, <8 x i32> <i32 0, i32 4, i32 1, i32 5, i32 2, i32 6, i32 3, i32 7>
store <8 x i32> %interleaved.vec, <8 x i32>* %ptr
This optimization is currently disabled by defaut. To try it by adding '-enable-interleaved-mem-accesses=true'.
llvm-svn: 239291
The first try (r238051) to land this was reverted due to ExecutionEngine build failure;
that was hopefully addressed by r238788.
The second try (r238842) to land this was reverted due to BUILD_SHARED_LIBS failure;
that was hopefully addressed by r238953.
This patch adds a TargetRecip class for processing many recip codegen possibilities.
The class is intended to handle both command-line options to llc as well
as options passed in from a front-end such as clang with the -mrecip option.
The x86 backend is updated to use the new functionality.
Only -mcpu=btver2 with -ffast-math should see a functional change from this patch.
All other x86 CPUs continue to *not* use reciprocal estimates by default with -ffast-math.
Differential Revision: http://reviews.llvm.org/D8982
llvm-svn: 239001
The first try (r238051) to land this was reverted due to bot failures
that were hopefully addressed by r238788.
This patch adds a TargetRecip class for processing many recip codegen possibilities.
The class is intended to handle both command-line options to llc as well
as options passed in from a front-end such as clang with the -mrecip option.
The x86 backend is updated to use the new functionality.
Only -mcpu=btver2 with -ffast-math should see a functional change from this patch.
All other x86 CPUs continue to *not* use reciprocal estimates by default with -ffast-math.
Differential Revision: http://reviews.llvm.org/D8982
llvm-svn: 238842
If a dead instruction we may not only have a last-use in the main live
range but also in a subregister range if subregisters are tracked. We
need to partially rebuild live ranges in both cases.
The testcase only broke when subregister liveness was enabled. I
commited it in the current form because there is currently no flag to
enable/disable subregister liveness.
This fixes PR23720.
llvm-svn: 238785
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238602
MIOperands/ConstMIOperands are classes iterating over the MachineOperand
of a MachineInstr, however MachineInstr::mop_iterator does the same
thing.
I assume these two iterators exist to have a uniform interface to
iterate over the operands of a machine instruction bundle and a single
machine instruction. However in practice I find it more confusing to have 2
different iterator classes, so this patch transforms (nearly all) the
code to use mop_iterators.
The only exception being MIOperands::anlayzePhysReg() and
MIOperands::analyzeVirtReg() still needing an equivalent, I leave that
as an exercise for the next patch.
Differential Revision: http://reviews.llvm.org/D9932
This version is slightly modified from the proposed revision in that it
introduces MachineInstr::getOperandNo to avoid the extra counting
variable in the few loops that previously used MIOperands::getOperandNo.
llvm-svn: 238539
About pristine regsiters:
Pristine registers "hold a value that is useless to the current
function, but that must be preserved - they are callee saved registers
that have not been saved." This concept saves compile time as it frees
the prologue/epilogue inserter from adding every such register to every
basic blocks live-in list.
However the current code in getPristineRegs is formulated in a
complicated way: Inside the function prologue and epilogue all callee
saves are considered pristine, while in the rest of the code only the
non-saved ones are considered pristine. This requires logic to
differentiate between prologue/epilogue and the rest and in the presence
of shrink-wrapping this even becomes complicated/expensive. It's also
unnecessary because the prologue epilogue inserters already mark
callee-save registers that are saved/restores properly in the respective
blocks in the prologue/epilogue (see updateLiveness() in
PrologueEpilogueInserter.cpp). So only declaring non-saved/restored
callee saved registers as pristine just works.
Differential Revision: http://reviews.llvm.org/D10101
llvm-svn: 238524
This commit introduces a serializable structure called
'llvm::yaml::MachineFunction' that stores the machine
function's name. This structure will mirror the machine
function's state in the future.
This commit prints machine functions as YAML documents
containing a YAML mapping that stores the state of a machine
function. This commit also parses the YAML documents
that contain the machine functions.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9841
llvm-svn: 238519
This moves all the state numbering code for C++ EH to WinEHPrepare so
that we can call it from the X86 state numbering IR pass that runs
before isel.
Now we just call the same state numbering machinery and insert a bunch
of stores. It also populates MachineModuleInfo with information about
the current function.
llvm-svn: 238514
GCC seems to have some overzealous warnings about strict aliasing.
Rafael reports that this patch suppresses them on GCC 4.9, and I'm
hoping this will work for GCC 4.7 as well. I'll watch [1] and iterate
if necessary.
[1]: http://bb.pgr.jp/builders/clang-3stage-x86_64-linux/builds/8597
llvm-svn: 238447
Change `DIE::addChild()` to return a reference to the just-added node,
and update consumers to use it directly. An upcoming commit will
abstract away (and eventually change) the underlying storage of
`DIE::Children`.
llvm-svn: 238372
Stop storing a `DIEAbbrev` in `DIE`, since the data fits neatly inside
the `DIEValue` list. Besides being a cleaner data structure (avoiding
the parallel arrays), this gives us more freedom to rearrange the
`DIEValue` list.
This fixes the temporary memory regression from 845 MB up to 879 MB, and
drops it further to 829 MB for a net memory decrease of around 1.9%
(incremental decrease around 5.7%).
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238364
This reverts commit r238350, effectively reapplying r238349 after fixing
(all?) the problems, all somehow related to how I was using
`AlignedArrayCharUnion<>` inside `DIEValue`:
- MSVC can only handle `sizeof()` on types, not values. Change the
assert.
- GCC doesn't know the `is_trivially_copyable` type trait. Instead of
asserting it, add destructors.
- Call placement new even when constructing POD (i.e., the pointers).
- Instead of copying the char buffer, copy the casted classes.
I've left in a couple of `static_assert`s that I think both MSVC and GCC
know how to handle. If the bots disagree with me, I'll remove them.
- Check that the constructed type is either standard layout or a
pointer. This protects against a programming error: we really want
the "small" `DIEValue`s to be small and simple, so don't
accidentally change them not to be.
- Similarly, check that the size of the buffer is no bigger than a
`uint64_t` or a pointer. (I thought checking against
`sizeof(uint64_t)` would be good enough, but Chandler suggested that
pointers might sometimes be bigger than that in the context of
sanitizers.)
I've also committed r238359 in the meantime, which introduces a
DIEValue.def to simplify dispatching between the various types (thanks
to a review comment by David Blaikie). Without that, this commit would
be almost unintelligible.
Here's the original commit message:
--
Change `DIEValue` to be stored/passed/etc. by value, instead of
reference. It's now a discriminated union, with a `Val` field storing
the actual type. The classes that used to inherit from `DIEValue` no
longer do. There are two categories of these:
- Small values fit in a single pointer and are stored by value.
- Large values require auxiliary storage, and are stored by reference.
The only non-mechanical change is to tools/dsymutil/DwarfLinker.cpp. It
was relying on `DIEInteger`s being passed around by reference, so I
replaced that assumption with a `PatchLocation` type that stores a safe
reference to where the `DIEInteger` lives instead.
This commit causes a temporary regression in memory usage, since I've
left merging `DIEAbbrevData` into `DIEValue` for a follow-up commit. I
measured an increase from 845 MB to 879 MB, around 3.9%. The follow-up
drops it lower than the starting point, and I've only recently brought
the memory this low anyway, so I'm committing these changes separately
to keep them incremental. (I also considered swapping the commits, but
the other one first would cause a lot more code churn.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
--
llvm-svn: 238362
This reverts commit r238349, since it caused some errors on bots:
- std::is_trivially_copyable isn't available until GCC 5.0.
- It was complaining about strict aliasing with my use of
ArrayCharUnion.
llvm-svn: 238350
Change `DIEValue` to be stored/passed/etc. by value, instead of
reference. It's now a discriminated union, with a `Val` field storing
the actual type. The classes that used to inherit from `DIEValue` no
longer do. There are two categories of these:
- Small values fit in a single pointer and are stored by value.
- Large values require auxiliary storage, and are stored by reference.
The only non-mechanical change is to tools/dsymutil/DwarfLinker.cpp. It
was relying on `DIEInteger`s being passed around by reference, so I
replaced that assumption with a `PatchLocation` type that stores a safe
reference to where the `DIEInteger` lives instead.
This commit causes a temporary regression in memory usage, since I've
left merging `DIEAbbrevData` into `DIEValue` for a follow-up commit. I
measured an increase from 845 MB to 879 MB, around 3.9%. The follow-up
drops it lower than the starting point, and I've only recently brought
the memory this low anyway, so I'm committing these changes separately
to keep them incremental. (I also considered swapping the commits, but
the other one first would cause a lot more code churn.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238349
An upcoming commit will switch to storing `DIEValue`s by value in a
`DIE`, so move the `DIE` down below all the subclasses it can. Two
subclasses inherit from `DIE`, so drop those down below `DIE`.
`DIEValue` will become a discriminated union, which contains an instance
of one of the classes that are currently subclasses. "Big" ones, such
as those that inherit from `DIE`, will continue to be stored by pointer.
This commit does as much of the code motion ahead of time as possible.
llvm-svn: 238346
This commit a 3rd attempt at comitting the initial MIR serialization patch.
The first commit (r237708) was reverted in 237730. Then the second commit
(r237954) was reverted in r238007, as the MIR library under CodeGen caused
a circular dependency where the CodeGen library depended on MIR and MIR
library depended on CodeGen.
This commit has fixed the dependencies between CodeGen and MIR by
reorganizing the MIR serialization code - the code that prints out
MIR has been moved to CodeGen, and the MIR library has been renamed
to MIRParser. Now the CodeGen library doesn't depend on the
MIRParser library, thus the circular dependency no longer exists.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
llvm-svn: 238341
- Clean documentation comment
- Change the API to accept an iterator so you can actually pass
MachineBasicBlock::end() now.
- Add more "const".
llvm-svn: 238288
remove ExecutionEngine's dependence on CodeGen. NFC.
This is a follow-up to r238080.
Differential Revision: http://reviews.llvm.org/D9830
llvm-svn: 238244
This is to fix problems introduced by r232481. For HSAIL,
this function does essentially nothing desirable, and
injects unwanted / incorrect stuff before the function.
The only thing it really needs to do is call EmitFunctionEntryLabel
in this case.
llvm-svn: 238222
Stop creating symbols we don't need in `DwarfStringPool`. The consumers
only call `DwarfStringPoolEntryRef::getSymbol()` when DWARF is
relocatable, so this just stops creating the unused symbols when it's
not. This drops memory usage from 851 MB to 845 MB, around 0.7%.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238122
Mint a new function, `AsmPrinter::emitDwarfStringOffset()`, which takes
a `DwarfStringPoolEntryRef`. When DWARF is relocatable across sections,
this defers to `emitSectionOffset()` and emits the `MCSymbol`;
otherwise, just emit the offset directly, without using any intermediate
symbols.
`EmitLabelDifference()` is already optimized to emit absolute label
differences cheaply when possible, so there aren't any major memory
savings here (853 MB down to 851 MB, or 0.2%). However, it prepares for
making the `MCSymbol`s in the `DwarfStringPool` optional.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238119
Expose the `DwarfStringPool` entry in a header, and store a pointer to
it directly in `DIEString`. Instead of choosing at creation time how to
emit it, use the `dwarf::Form` to determine that at emission time.
Besides avoiding the other `DIEValue`, this shaves two pointers off of
`DIEString`; the data is now a single pointer. This is a nice cleanup
on its own -- and drops memory usage from 861 MB down to 853 MB, around
0.9% -- but it's also preparation for passing `DIEValue`s by value.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238117
Extract out `DwarfStringPoolEntry` and `DwarfStringPoolRef` from
`DwarfStringPool` so that downstream users can start using
`DwarfStringPool::getEntry()` directly. This will allow users to delay
the decision between emitting a symbol or an offset until later.
llvm-svn: 238116
Remove all virtual functions from `DIEValue`, dropping the vtable
pointer from its layout. Instead, create "impl" functions on the
subclasses, and use the `DIEValue::Type` to implement the dynamic
dispatch.
This is necessary -- obviously not sufficient -- for passing `DIEValue`s
around by value. However, this change stands on its own: we make tons
of these. I measured a drop in memory usage from 888 MB down to 860 MB,
or around 3.2%.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238084
This is part of the work to remove TargetMachine::resetTargetOptions.
In this patch, instead of updating global variable NoFramePointerElim in
resetTargetOptions, its use in DisableFramePointerElim is replaced with a call
to TargetFrameLowering::noFramePointerElim. This function determines on a
per-function basis if frame pointer elimination should be disabled.
There is no change in functionality except that cl:opt option "disable-fp-elim"
can now override function attribute "no-frame-pointer-elim".
llvm-svn: 238080
This patch adds a class for processing many recip codegen possibilities.
The TargetRecip class is intended to handle both command-line options to llc as well
as options passed in from a front-end such as clang with the -mrecip option.
The x86 backend is updated to use the new functionality.
Only -mcpu=btver2 with -ffast-math should see a functional change from this patch.
All other CPUs continue to *not* use reciprocal estimates by default with -ffast-math.
Differential Revision: http://reviews.llvm.org/D8982
llvm-svn: 238051
This change to VirtRegRewriter::addMBBLiveIns adds live-in registers for each
MachineBasicBlock's LiveIns set without isLiveIn checks as they are being added
because doing so is expensive. After all live-in registers are added, the LiveIn
vectors are sorted and uniqued.
llvm-svn: 238008
Previously `SDDbgValue`s used the general allocator that lives for all
of `SelectionDAG`. Instead, give them their own allocator, and reset it
whenever `SDDbgInfo::clear()` is called, plugging a spiritual leak.
This drops `SelectionDAGBuilder::visitIntrinsicCall()` off of my heap
profile (was at around 2% of `llc` for codegen of `-flto -g`). Thanks
to Pete Cooper for spotting the problem and suggesting the fix.
llvm-svn: 237998
This commit is a 2nd attempt at committing the initial MIR serialization patch.
The first commit (r237708) made the incremental buildbots unstable and was
reverted in r237730. The original commit didn't add a terminating null
character to the LLVM IR source which was passed to LLParser, and this
sometimes caused the test 'llvmIR.mir' to fail with a parsing error because
the LLVM IR source didn't have a null character immediately after the end
and thus LLLexer encountered some garbage characters that ultimately caused
the error.
This commit also includes the other test fixes I committed in
r237712 (llc path fix) and r237723 (remove target triple) which
also got reverted in r237730.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
llvm-svn: 237954