This adds initial support for a demangling library (LLVMDemangle)
and tool (llvm-undname) for demangling Microsoft names. This
doesn't cover 100% of cases and there are some known limitations
which I intend to address in followup patches, at least until such
time that we have (near) 100% test coverage matching up with all
of the test cases in clang/test/CodeGenCXX/mangle-ms-*.
Differential Revision: https://reviews.llvm.org/D49552
llvm-svn: 337584
Summary:
When splitting predecessors in BasicBlockUtils, we create a new block as an immediate predecessor of the original BB, then we connect a given set of predecessors to the new block.
The API in this patch will be used to update MemoryPhis for this CFG change.
If all predecessors are being moved, we move the MemoryPhi directly. Otherwise we create a new MemoryPhi in the NewBB and populate its incoming values, while deleting them from BB's Phi.
[Split from D45299 for easier review]
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D49156
llvm-svn: 337581
We can safely use getConstant here as we're still lowering, which allows constant folding to kick in and simplify the vector shift codegen.
Noticed while working on D49562.
llvm-svn: 337578
Enable the optimization of operations on DPR and SPR via a feature instead
of checking the target.
Differential revision: https://reviews.llvm.org/D49463
llvm-svn: 337575
This is a new modernized VS integration installer. It adds a
Visual Studio .sln file which, when built, outputs a VSIX that can
be used to install ourselves as a "real" Visual Studio Extension.
We can even upload this extension to the visual studio marketplace.
This fixes a longstanding problem where we didn't support installing
into VS 2017 and higher. In addition to supporting VS 2017, due
to the way this is written we now longer need to do anything special
to support future versions of VS as well. Everything should
"just work". This also fixes several bugs with our old integration,
such as MSBuild triggering full rebuilds when /Zi was used.
Finally, we add a new UI page called "LLVM" which becomes visible
when the LLVM toolchain is selected. For now this only contains
one option which is the path to clang-cl.exe, but in the future
we can add more things here.
Differential Revision: https://reviews.llvm.org/D42762
llvm-svn: 337572
When pointer checking is enabled, it's important that every pointer is
checked before its value is used.
For stores MSan used to generate code that calculates shadow/origin
addresses from a pointer before checking it.
For userspace this isn't a problem, because the shadow calculation code
is quite simple and compiler is able to move it after the check on -O2.
But for KMSAN getShadowOriginPtr() creates a runtime call, so we want the
check to be performed strictly before that call.
Swapping materializeChecks() and materializeStores() resolves the issue:
both functions insert code before the given IR location, so the new
insertion order guarantees that the code calculating shadow address is
between the address check and the memory access.
llvm-svn: 337571
Summary: In Python 3, sys.stdout.write expects a string rather than bytes. In order to be able to write the bytes to stdout, we need to use the buffer directly instead. This change is borrowing the implementation for writing to stdout that cat.py uses. Note that we cannot use cat.py directly because the file we are trying to open is a gzip file.
Reviewers: asmith, bkramer, alexshap, jakehehrlich
Reviewed By: alexshap, jakehehrlich
Subscribers: jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D49515
llvm-svn: 337567
Summary:
Each of the four methods had a dozen lines and was doing almost exactly
the same thing: get the appropriate accelerator table kind and insert an
entry into it. I move this common logic to a helper function and make
these methods delegate to it.
This came up in the context of D49493, where I've needed to make adding
a string to a string pool slightly more complicated, and it seemed to
make sense to do it in one place instead of five.
To make this work I've needed to unify the interface of the AccelTable
data types, as some used to store DIE& and others DIE*. I chose to unify
to a reference as that's what the caller uses.
This technically isn't NFC, because it changes the StringPool used for
apple tables in the DWO case (now it uses the main file like DWARF v5
instead of the DWO file). However, that shouldn't matter, as DWO is not
a thing on apple targets (clang frontend simply ignores -gsplit-dwarf).
Reviewers: JDevlieghere, aprantl, probinson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49542
llvm-svn: 337562
When merging through a TokenFactor we need to check that the
load may be ordered such that no other aliasing memory operations may
happen. It is not sufficient to just check that the load is a member
of the chain token factor as it there may be a indirect chain. Require
the load's chain has only one use.
This fixes PR37826.
Reviewers: spatel, davide, efriedma, craig.topper, RKSimon
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D49388
llvm-svn: 337560
This version contains a fix to add values for which the state in ParamState change
to the worklist if the state in ValueState did not change. To avoid adding the
same value multiple times, mergeInValue returns true, if it added the value to
the worklist. The value is added to the worklist depending on its state in
ValueState.
Original message:
For comparisons with parameters, we can use the ParamState lattice
elements which also provide constant range information. This improves
the code for PR33253 further and gets us closer to use
ValueLatticeElement for all values.
Also, as we are using the range information in the solver directly, we
do not need tryToReplaceWithConstantRange afterwards anymore.
Reviewers: dberlin, mssimpso, davide, efriedma
Reviewed By: mssimpso
Differential Revision: https://reviews.llvm.org/D43762
llvm-svn: 337548
This is an early step towards using SimplifyDemandedVectorElts for target shuffle combining - this merely moves the existing X86ISD::VBROADCAST simplification code to use the SimplifyDemandedVectorElts mechanism.
Adds X86TargetLowering::SimplifyDemandedVectorEltsForTargetNode to handle X86ISD::VBROADCAST - in time we can support all target shuffles (and other ops) here.
llvm-svn: 337547
Summary:
This patch makes us generate the debug_names section in response to some
user-facing commands (previously it was only generated if explicitly
selected via the -accel-tables option).
My goal was to make this work for DWARF>=5 (as it's an official part of
that standard), and also, as an extension, for DWARF<5 if one is
explicitly tuning for lldb as a debugger (because it brings a large
performance improvement there).
This is slightly complicated by the fact that the debug_names tables are
incompatible with the DWARF v4 type units (they assume that the type
units are in the debug_info section), and unfortunately, right now we
generate DWARF v4-style type units even for -gdwarf-5. For this reason,
I disable all accelerator tables if the user requested type unit
generation. I do this even for apple tables, as they have the same
problem (in fact generating type units for apple targets makes us crash
even before we get around to emitting the accelerator tables).
Reviewers: JDevlieghere, aprantl, dblaikie, echristo, probinson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49420
llvm-svn: 337544
It looks like currently the UBSan blacklist is only applied when "Undefined" is selected.
This patch updates the cmake file to apply it whenever Undefined is selected
(e.g. 'Address; Undefined' ). This allows us to use the workaround added in
rL335525 when using AddressSan and UBSan together.
Reviewers: eugenis, vitalybuka
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D49558
llvm-svn: 337539
As a consequence of recent discussions
(http://lists.llvm.org/pipermail/llvm-dev/2018-May/123164.html), this patch
changes the SystemZ SchedModels so that the IssueWidth is 6, which is the
decoder capacity, and NumMicroOps become the number of decoder slots needed
per instruction.
In addition, the SchedWrite latencies now match the MachineInstructions
def-operand indexes, and ReadAdvances have been added on instructions with
one register operand and one memory operand.
Review: Ulrich Weigand
https://reviews.llvm.org/D47008
llvm-svn: 337538
This patch adds the following instructions:
RBIT reverse bits within each active elemnt (predicated), e.g.
rbit z0.d, p0/m, z1.d
for 8, 16, 32 and 64 bit elements.
REV reverse order of elements in data/predicate vector
(unpredicated), e.g.
rev z0.d, z1.d
rev p0.d, p1.d
for 8, 16, 32 and 64 bit elements.
REVB reverse order of bytes within each active element, e.g.
revb z0.d, p0/m, z1.d
for 16, 32 and 64 bit elements.
REVH reverse order of 16-bit half-words within each active
element, e.g.
revh z0.d, p0/m, z1.d
for 32 and 64 bit elements.
REVW reverse order of 32-bit words within each active element,
e.g.
revw z0.d, p0/m, z1.d
for 64 bit elements.
llvm-svn: 337534
I'm optimistically reverting commit r337511, effectively reapplying
r337504 *without* changes.
The failing bots that had `SmallVector` in the backtrace recovered after
the unrelated commit r337508. The backtraces looked bogus anyway, with
`SmallVector::size()` calling (e.g.) `ConstantArray::get()`.
Here's the original commit message:
ADT: Shrink size of SmallVector by 8B on 64-bit platforms
Represent size and capacity directly as unsigned and calculate
`end()` using `begin() + size()`.
This limits the maximum size/capacity of a vector to UINT32_MAX.
https://reviews.llvm.org/D48518
llvm-svn: 337514
Summary:
lifetime2.C violates DR1696, which prevents reference members from being
initialized to temporaries, whose lifetime would end at the end of ctor.
Reviewers: sbc100
Subscribers: dschuff, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D49577
llvm-svn: 337512
remove dead declaration of a call instruction handling helper.
This moves to the 'harden' terminology that I've been trying to settle
on for returns. It also adds a really detailed comment explaining what
all we're trying to accomplish with return instructions and why.
Hopefully this makes it much more clear what exactly is being
"hardened".
Differential Revision: https://reviews.llvm.org/D49571
llvm-svn: 337510
It's more aggressive than we need to be, and leads to strange
workarounds in other places like call return value inference. Instead,
just directly mark an edge viable.
Tests by Florian Hahn.
Differential Revision: https://reviews.llvm.org/D49408
llvm-svn: 337507
Representing size and capacity directly as unsigned and calculate
`end()` using `begin() + size()`.
This limits the maximum size/capacity of a vector to UINT32_MAX.
https://reviews.llvm.org/D48518
llvm-svn: 337504
Summary:
Currently all type ids are emitted into the index file when it is
written. For distributed ThinLTO, that meant that all type ids were
being duplicated into every single distributed index file, regardless of
whether they were referenced, leading to huge amounts of unnecessary
duplication and size bloat.
Keep track of the type id GUIDs actually referenced by the GV summary
records being emitted, and only emit those type IDs.
Add a new test, and fix test/Assembler/thinlto-summary.ll so that all
type ids are referenced to prevent deletion in that test.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, vitalybuka, llvm-commits
Differential Revision: https://reviews.llvm.org/D49565
llvm-svn: 337503
